Micellar electrokinetic chromatography systems for the separation of mixtures of charged and uncharged compounds

In this study, the migration behavior of charged and uncharged analytes was investigated under different conditions. Effective mobilities - electrophoretic mobilities under the influence of micelles - of cations, anions, and neutrals were measured at neutral, basic, and acidic pH (7.5, 11, and 2.2) using background electrolytes containing different sodium dodecyl sulfate (SDS) concentrations (0-90 mM) and acetonitrile (ACN) proportions (0-75%). SDS concentration and ACN proportion were found to have a tremendous effect on the effective mobilities and migration order of the model compounds. Although the SDS micelles preferably interact with neutrals and cations, hydrophobic bonds can also occur with anions. Cations, anions, and neutrals having rather different migration behaviors, it is possible to considerably enhance the selectivity of the method by adjusting properly the SDS concentration and the ACN proportion. These observations confirm the interest of using micellar electrokinetic chromatography not only for the separation of neutral substances but also to analyze charged compounds.     

Comparison and prediction of the retention in micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for disubstituted benzenes

Retention index (I), rather than retention factor (k), was found to be a more reasonable parameter for comparison of the relative affinity of disubstituted benzenes in MEEKC and MEKC, due to independent of I with the SDS surfactant concentration. MEKC and MEEKC may give similar or different I values, depending on types of moieties. With known I and K_ow for alkylbenzenes as references in MEKC and MEEKC, the values of K_ow for disubstituted benzenes can be estimated from the observed I values, where K_ow is the octanol–water distribution constant. In addition, a group additive approach can be used to predict I for disubstituted benzenes with different moieties from the average observed I for the disubstituted benzenes with same moieties. However, electronic effects and/or intramolecular interaction may result in the different observed I from prediction.     

Micellar selectivity triangle for classification of chemical selectivity in electrokinetic chromatography

A novel micellar selectivity triangle (MST) is developed and used to characterize and classify the chemical selectivities of pseudo-phases in electrokinetic chromatography (EKC). The MST scheme is, in concept, similar to the widely known solvent selectivity triangle (SST) originally developed by Snyder. However, the MST is based on linear solvation energy relationships. Thus it incorporates the solvation characteristics of both the pseudo-phase and the bulk solvent; while the SST is basically for classification of pure solvents. The similarities and differences of these pseudo-phases are determined by the relative scales of hydrogen bond donating ability (X_b), hydrogen bond accepting ability (X_a) and dipolarity (X_s). The MST scheme is used for characterization and classification of a wide range of pseudo-phases such as micelles, polymers, vesicles, liposomes, as well as mixed systems such as mixed micelles, mixed polymer–surfactants, organically modified pseudo-phases, etc. Over seventy pseudo-phases were examined and four clusters of pseudo-phases with different selectivity patterns are recognized that include pseudo-phases with strong hydrogen bond acidities (e.g. fluorinated micelles or micelles modified with fluorinated alcohols), strong hydrogen bond acceptor pseudo-phases (such as bile salts, liposomes, microemulsions, as well as biphasic octanol–water system), strong dipolar phase of a class of polymeric pseudo-phase, and pseudo-phases with intermediate hydrogen bonding and dipolarity [like sodium dodecyl sulfate (SDS) and its analogs as well as organically modified SDS]. The MST scheme is also useful in identifying pseudo-phases that closely resemble the selectivities of octanol–water for determination of octanol–water partition coefficients by EKC.     

离子液体对胶束电动色谱胶束微结构以及分离效果的影响

考察了离子液体对胶束电动色谱胶柬微结构以及分离效果的影响.研究结果表明,离子液体使胶束的表面电荷密度变小、粒径变大及其内核极性增大.以泼尼松、氢化可的松和泼尼松龙为分析对象,氢化可的松与泼尼松龙在十二烷基硫酸钠(SDS)胶束体系中不能实现分离.而在SDS-离子液体混合介质(20 mmol/L SDS-10 mmol/L...     

Optimization of resolution in micellar electrokinetic chromatography

A comparison of separations conducted in sodium dodecyl sulfate (SDS) and SDS modified with Brij 35 indicates that selectivity, in Micellar Electrokinetic Chromatography (MEKC), is governed by the composition of the micellar phase. Beyond selectivity optimization, resolution may be improved by increasing efficiency or decreasing electroosmotic flow. Of these approaches, increasing capillary length (to improve efficiency) should be a more time effective means of improving separation.     

Determination of nikethamide by micellar electrokinetic chromatography

A simple, fast, sensitive and reproducible micellar electrokinetic chromatography (MEKC)–UV method for the determination of nikethamide (NKD) in human urine and pharmaceutical formulation has been developed and validated. The method exhibits high trueness, good precision, short analysis time and low reagent consumption. NKD is an organic compound belonging to the psychoactive stimulants used as an analeptic drugs. The proposed analytical procedure consists of few steps: dilution of urine or drug in distilled water, centrifugation for 2 min (12,000 g ), separation by MEKC and ultraviolet‐absorbance detection of NKD at 260 nm. The background electrolyte used was 0.035 mol/L pH 9 borate buffer with the addition of 0.05 mol/L sodium dodecyl sulfate and 6.5% ACN. Effective separation was achieved within 5.5 min under a voltage of 21 kV (~90 μA) using a standard fused‐silica capillary (effective length 51 cm, 75 μm i.d.). The determined limit of detection for NKD in urine was 1 μmol/L (0.18 μg/mL). The calibration curve obtained for NKD in urine showed linearity in the range 4–280 μmol/L (0.71–49.90 μg/mL), with R² 0.9998. The RSD of the points of the calibration curve varied from 5.4 to 9.5%. The analytical procedure was successfully applied to analysis of pharmaceutical formulation and spiked urine samples from healthy volunteers.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Retention indices in micellar electrokinetic chromatography

The use of retention indices in micellar electrokinetic chromatography (MEKC) is evaluated both from a theoretical and a practical point of view. Fundamental equations for the determination of retention indices in MEKC are described, showing that retention indices are independent of the surfactant concentration. Possibilities as well as limitations of different homologous series as reference standards are described. In addition, the practical application of retention indices for identification, investigation of solute-micelle interactions, characterization and classification of pseudo-stationary phases and determination of solute lipophilicity are discussed.     

Utilisation of crown ethers in microemulsion electrokinetic chromatography for the separation of inorganic cations

A new method to influence the separation selectivity of inorganic cations in capillary electrophoresis is presented. This method combines the use of certain crown ethers to form complexes with a specific cation (changing its ionic radius/charge ratio and thereby its electrophoretic mobility) with partitioning of the crown ether/analyte complex between an aqueous phase and a pseudo-stationary phase, such as the oil droplet of a microemulsion. Several microemulsions, including uncharged oil droplets and oil droplets with different degrees of surface charge were tested to evaluate their ability to improve the separation of the selected analytes.     

Strategies for the on-line preconcentration and separation of hypolipidaemic drugs using micellar electrokinetic chromatography

Three strategies were investigated for the simultaneous separation and on-line preconcentration of charged and neutral hypolipidaemic drugs in micellar electrokinetic chromatography (MEKC). A background electrolyte (BGE) consisting of 20 mM ammonium bicarbonate buffer (pH 8.50) and 50 mM sodium dodecyl sulfate (SDS) was used for the separation and on-line preconcentration of the drugs. The efficiencies of sweeping, analyte focusing by micelle collapse (AFMC), and simultaneous field-amplified sample stacking (FASS) and sweeping, were compared for the preconcentration of eight hypolipidaemic drugs in different conductivity sample matrices. When compared with a hydrodynamic injection (5 s at 50 mbar, 0.51% of capillary volume to detection window) of drug mixture prepared in the separation BGE, improvements of detection sensitivity of 60-, 83-, and 80-fold were obtained with sweeping, AFMC and simultaneous FASS and sweeping, respectively, giving limits of detection (LODs) of 50, 36, and 38 μg/L, respectively. The studied techniques showed suitability for focusing different types of analytes having different values of retention factor (k). This is the first report for the separation of different types of hypolipidaemic drugs by capillary electrophoresis (CE). The three methods were validated then applied for the analysis of target analytes in wastewater samples from Hobart city.     

Using micellar electrokinetic chromatography for the highly efficient preconcentration and separation of gold nanoparticles

In this paper, we report the use of micellar electrokinetic chromatography (MEKC) for the highly efficient preconcentration and separation of gold nanoparticles (Au NPs). We used the reversed electrode polarity stacking mode (REPSM) of the MEKC system for the on-line enhancement and separation of the Au NPs. Several parameters had dramatic effects on the systems’ performance, including the concentration of sodium dodecylsulfate (SDS) surfactant, the presence of salts in the NP solution, the pH of the running electrolyte, and the temperature of the capillary. Under the optimized conditions [buffer: SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 10.0; applied voltage: 20 kV; operating temperature: 25 °C; additive: sodium dihydrogenphosphate (NaH₂PO₄, 10 mM); REPSM strategy for sample preconcentration], the number of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were 3000 and (an ultrahigh) 2.1 × 10⁶, respectively; in addition, the detection sensitivities toward the Au NPs were enhanced ca. 20- and 380-fold, respectively, relative to those obtained using standard MEKC analysis conditions. Furthermore, monitoring the electropherograms using diode-array detection allowed us to identify and characterize the sizes of the separated NPs from their UV–vis spectra. Our findings suggest that MEKC is a highly efficient tool for both the preconcentration and separation of NPs.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic chromatography for the separation of twelve aromatic sulphonate compounds

Summary Two modes of capillary electrophoresis (CE), capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC), were investigated for the separation of 12 aromatic sulphonate compounds. In CZE, although the voltage applied, the buffer concentration and the pH were optimized for effective separation of the compounds studied, under the best conditions four of the five amino compounds coeluted, as did naphthalene-1-sulphonic acid and naphthalene-2-sulphonic acid. In MEKC, sodium dodecyl sulphate (SDS) and Brij 35 were chosen as the anionic and nonionic surfactants and the effect of the concentration of micelles was examined. The effect of adding methanol as the organic modifier was also investigated with each of these micellar systems. All the analytes, including the isomers, were completely separated by use of MEKC with Brij 35 but when SDS was used only 11 compounds were separated because two amino compounds coeluted.     

Systematic optimization of micellar electrokinetic chromatographic separation of flavonoids

Summary A simple and rapid systematic optimization scheme was described for the micellar electrokinetic chromatographic separation of a group of flavonoids. The scheme employed an interpretative optimization approach to predict the optimum conditions for the separation of a group of flavonoids by micellar electrokinetic chromatography. By performing a set of nine pre-planned experiments conducted over the maximum working range for the system, global optimum separation conditions could be determined. To validate the optimization procedure, additional experiments were performed using the optimum experimental conditions derived from the optimization scheme. The results showed that satisfactory separation of all the peaks could be obtained. In addition, the application of the method in micropreparative micellar electrokinetic chromatography of the flavonoids was demonstrated.     

Separation of aromatic sulfonate compounds by coelectroosmotic micellar electrokinetic chromatography

Summary Coelectroosmotic micellar electrokinetic chromatography (coelectroosmotic MEKC) has been investigated for the separation of twelve aromatic sulfonate compounds. The advantage of this method is that it combines the efficient separation characteristic of MEKC and the short analysis time of the coelectroosmotic mode. MEKC was performed with either cetyltrimethylammonium bromide (CTAB) or polyethylene glycol dodecyl ether (Brij 35) surfactants as pseudostationary phases and 2-propanol as organic modifier. The electroosmotic Flow (EOF) was reversed by adding two types of EOF modifier, an alkylammonium salt (cetyltrimethylammonium bromide, CTAB) or a cationic polyelectrolyte (hexadimetrine bromide, HDB). The surfactant concentration, applied voltage, and temperature were optimized, the influence of 2-propanol on the MEKC resolution of the compounds was studied. The effect of the osmotic modifier on the separation was also investigated.     

Modeling of anti-Langmuirian peaks in micellar electrokinetic chromatography: benzene and naphthalene

Peaks of benzene (bz) and naphthalene (np) having diffuse fronts and steep rears under overload conditions were studied quantitatively in MEKC with SDS surfactant. The retardation factors of these compounds, solubilized at microM to mM concentrations by either 10, 30, or 50 mM SDS, were determined by vacancy MEKC and frontal analysis MEKC. Isotherm coordinates were calculated from the retardation factors, and the equation for the concave upward anti-Langmuir isotherm was fit to them. Peak profiles were computed with the MacCormack algorithm from the isotherm fits and a simplified continuity equation appropriate to MEKC. These profiles were compared to ones generated in normal MEKC from samples of bz and np solubilized at muM to mM concentrations by either 10, 30, or 50 mM SDS. In all cases, the anti-Langmuir isotherm described the asymmetry of experimental peaks. For bz in 30 and 50 mM SDS and np in 10 and 50 mM SDS, good to excellent agreement was found between the experimental and predicted profiles. For bz in 10 mM SDS, the experimental profiles were more broadened than the predicted ones, although their asymmetries agreed. For np in 30 mM SDS, the experimental isotherm predicted greater peak asymmetry than was observed, and the correct anti-Langmuir isotherm for all sample concentrations and field strengths was calculated from the most asymmetrical peak by the inverse method. The relative decrease of zone velocity with increasing analyte concentration was calculated from the isotherm parameters, electrokinetic mobilities, retardation factors, surfactant concentrations, and CMC. The simplification of the continuity equation was justified.     

Determination of neutral and cationic herbicides in water by micellar electrokinetic capillary chromatography

The separation and determination of two s-triazines and two quats in water samples by MEKC was described. The influence of pH, type and concentration of buffer, concentration and type of surfactant, organic modifier and the added salt on the separation of the two neutral and the two cationic herbicides was studied. Simazine and atrazine (neutral compounds at the working pH) were little influenced by the chemical variables, while the cationic paraquat and diquat were more influenced. In the optimisation on the separation voltage, the total concentration of salt in the run buffer and the repeatability of the separation were taken into consideration. The composition of dissolution, in which the analytes were dissolved, was also studied.A solid-phase extraction method to retain and to elute the four analytes in a single step was also developed. Recoveries between 80 and 95% and R.S.D. between 6 and 10% was obtained in the analysis of a well-water sample spiked with 2 and 5 ppb of triazines and quats, respectively. Detection limits were between 0.6 and 1.9 ppb.     

Analysis of ecdysteroids by micellar electrokinetic chromatography with on-line preconcentration

In order to enhance the UV detection sensitivity, an application study of an on-line preconcentration technique for micellar electrokinetic chromatographic (MEKC) was carried out. The simultaneous determination of four test ecdysteroids, 20-hydroxyecdysone, ajugasterone C, polypodine B and ponasterone A has been investigated by using the normal stacking mode in MEKC with UV detection. The effects of anionic surfactant composition and concentration, the applied voltage, the pH buffer, the kind and the amount of organic solvent and the injection time on the analyte resolution were evaluated. The optimised conditions for the separation involved the use of a 50 mM borate as the running buffer containing 50 mM of a mixture of sodium dodecyl sulphate (SDS) and sodium cholate (SC) in the ratio of 1:1 together with a concentration of 10% (v/v) of 2-PrOH at pH 9.0. Hydrodynamic injection of 12 s at 50 mbar and separation voltage of 20 kV at temperature of 20 degrees C were employed. These conditions allowed a repeatability separation within 21 min. Concentration detection limit for the neutral analytes studied improve about an order of magnitude. The method was also applied to the determination of ecdysteroids in a real sample.     

Optimization strategies in micellar electrokinetic capillary chromatography

Summary Computer-assisted procedures for the one-parameter optimization of the surfactant concentration and the concentration of urea or D-glucose as modifiers in micellar electrokinetic capillary chromatography have been developed. These procedures permit a rapid optimization of one parameter on the basis of only two experiments. Predicted values are compared to empirically obtained optimum values. The influence of the modifier concentration on the critical micelle concentration of sodium dodecyl sulfate was experimentally determined in buffers commonly employed in micellar electrokinetic chromatography. The alteration of retention factors of solutes caused by the influence of urea addition on the critical micelle concentration of sodium dodecyl sulfate was calculated under the assumption of constant distribution coefficients and compared to experimentally obtained values. It was demonstrated that the addition of urea or of D-glucose does not alter the phase ratio substantially.