Analysis of E. coli soluble proteins by non‐denaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF

Escherichia coli (strain K‐12)‐soluble proteins were analyzed by nondenaturing micro 2‐DE and MALDI‐MS‐PMF. The reported conditions of nondenaturing IEF in agarose column gels [Jin, Y., Manabe, T., Electrophoresis 2009, 30, 939–948] were modified to optimize the resolution of cellular soluble proteins. About 300 CBB‐stained spots, the apparent molecular masses of which ranged from ca. 6000 to 10 kDa, were detected. All the spots on two reference 2‐DE gels (one for wide mass range and one for low‐molecular‐mass range) were numbered and subjected to MALDI‐MS‐PMF for the assignment of constituting polypeptides. Most of the spots (310 spots out of 329) provided significant match (p<0.05) with polypeptides in Swiss‐Prot database and totally 228 polypeptide species were assigned. Activity staining of enzymes such as alkaline phosphatase and catalases was performed on the 2‐DE gels and the locations of the activity spots matched well with those of the MS‐assigned polypeptides of the enzymes. Most of the polypeptides with subunit information in Swiss‐Prot (119 polypeptides as homo‐multimers and 25 as hetero‐multimers out of the 228), such as pyruvate dehydrogenase complex which is composed of three enzymatic components, were detected at the apparent mass positions of their polymers, suggesting that the proteins were separated retaining their subunit structures. When a nondenaturing 2‐DE gel was vertically cut into 2 mm strips and one of the strips was subjected to a third‐dimension micro SDS‐PAGE (micro 3‐DE), about 190 CBB‐stained spots were detected. The assignment of the polypeptides separated on the 3‐DE gel would further provide information on protein/polypeptide interactions.     

Assignment of human plasma polypeptides on a nondenaturing 2-D gel using MALDI-MS and PMF and comparisons with the results of intact protein mapping

Human plasma proteins were separated by 2-DE under nondenaturing conditions followed by the assignment of the CBB-stained spots using MALDI-MS and PMF, aiming to correlate the information of intact proteins with that of constituent polypeptides. A microgel system was employed to facilitate the analysis. Totally 157 spots on a nondenaturing micro-2-DE gel were numbered, the spots were excised, the proteins in the gel pieces were subjected to in-gel digestion with trypsin followed by polypeptide analysis using MALDI-MS and PMF. Two PMF algorithms, MASCOT (with Swiss-Prot database) and ProFound (with NCBInr database) were employed. A total of 153 spots out of the 157 provided significant match (p <0.05) with polypeptides in databases. Eighty spots were assigned to contain multiple (2-4) polypeptides, suggesting (i) noncovalent interaction between proteins/polypeptides, (ii) disulfide bonding of polypeptides, or (iii) overlapping of the protein locations on the gel. The results of polypeptide assignment coincided very well with the results of protein mapping previously reported, in which 33 plasma proteins were identified using blotting-immunochemical staining (Manabe, T., Takahashi, Y., Higuchi, N., Okuyama, T., Electrophoresis 1985, 6, 462-467). Further, 19 polypeptides in 25 spots were newly assigned. These results demonstrate that the techniques of MALDI-MS and PMF can be applied for analysis of proteins separated on nondenaturing 2-DE gels, providing information on their polypeptide structure. The integrated information on proteins and polypeptides would help the comprehensive understanding on the functions of complex protein systems.     

In‐gel equilibration for improved protein retention in 2DE‐based proteomic workflows

The 2DE is a powerful proteomic technique, with excellent protein separation capabilities where intact proteins are spatially separated by pI and molecular weight. 2DE is commonly used in conjunction with MS to identify proteins of interest. Current 2DE workflow requires several manual processing steps that can lead to experimental variability and sample loss. One such step is the transition between first dimension IEF and second‐dimension SDS‐PAGE, which requires exchanging denaturants and the reduction and alkylation of proteins. This in‐solution‐based equilibration step has been shown to be rather inefficient, losing up to 30% of the original starting material through diffusion effects. We have developed a refinement of this equilibration step using agarose stacking gels poured on top of the second‐dimension SDS‐PAGE gel, referred to as in‐gel equilibration. We show that in‐gel equilibration is effective at reduction and alkylation in SDS‐PAGE gels. Quantification of whole‐cell extracts separated on 2DE gels shows that in‐gel equilibration increases protein retention, decreased intergel variability, and simplifies 2DE workflow.     

Alkaline extraction of human plasma proteins from nondenaturing micro-2-D gels for protein/polypeptide mass measurement and peptide mass fingerprinting using MALDI-TOF MS

Previously, we have reported a high-efficiency method of protein extraction from CBB-stained polyacrylamide gels for molecular mass measurement with MALDI-TOF MS [1]. In the present work, the alkaline extraction method was applied to CBB-stained 2-DE gels on which human plasma proteins were separated in the absence of denaturant. In order to examine the performance of the method, ten spots with apparent molecular masses (MMapp) in the range of 65 to 1000 kDa were selected and the proteins were extracted from the gel pieces. The extracts were subjected to whole-mass measurement by MALDI-TOF MS, with and without DTT treatment. In addition, the extracts were subjected to in-solution trypsin digestion followed by MALDI-TOF MS and PMF analysis. Successful extraction of proteins from the ten spots, up to MMapp 1000 kDa, has been ascertained by the significant PMF assignment (MASCOT) with high sequence coverage of the respective proteins or polypeptides. When direct mass measurement of the extracted proteins was attempted, three spots in MMapp range 65-100 kDa provided mass peaks. Five spots in MMapp range 150-400 kDa did not give mass peaks of the intact proteins, but showed those of the constituent polypeptides after the DTT treatment. Extraction of proteins prior to trypsin digestion enabled the procedure of PMF analysis to be much simpler than the conventional in-gel digestion method, providing comparable protein scores and sequence coverage. The technique presented here suggests a new strategy for the characterization of proteins separated by nondenaturing 2-DE.     

Global mapping of rat plasma proteins with a native proteomic approach using nondenaturing micro 2DE and quantitative LC‐MS/MS

Plasma samples from adult male rats were separated by nondenaturing micro 2DE and a reference gel was selected, on which 136 CBB‐stained spots were numbered and subjected to in‐gel digestion and quantitative LC‐MS/MS. The analysis provided the assignment of 1–25 (average eight) non‐redundant proteins in each spot and totally 199 proteins were assigned in the 136 spots. About 40% of the proteins were detected in more than one spot and 15% in more than ten spots. We speculate this complexity arose from multiple causes, including protein heterogeneity, overlapping of protein locations and formation of protein complexes. Consequently, such results could not be appropriately presented as a conventional 2DE map, i.e. a list or a gel pattern with one or a few proteins annotated to each spot. Therefore, the LC‐MS/MS quantity data was used to reconstruct the gel distribution of each protein and a library containing 199 native protein maps was established for rat plasma. Since proteins that formed a complex would migrate together during the nondenaturing 2DE and thus show similar gel distributions, correlation analysis was attempted for similarity comparison between the maps. The protein pairs showing high correlation coefficients included some well‐known complexes, suggesting the promising application of native protein mapping for interaction analysis. With the importance of rat as the most commonly used laboratory animal in biomedical research, we expect this work would facilitate relevant studies by providing not only a reference library of rat plasma protein maps but a means for functional and interaction analysis.     

Noncovalent interactions in human plasma proteins analyzed by the comparison of nondenaturing and denaturing micro-2-D gel electrophoresis patterns after polypeptide assignment using matrix-assisted laser desorption/ionization-mass spectrometry and peptide mass fingerprinting

Previously, we reported the analysis of human plasma proteins by 2-DE under nondenaturing conditions (Type-I 2-DE) followed by the assignment of stained spots using MALDI-MS and PMF [1]. Here, we employ 2-DE conditions modified only in the second-dimensional separation; SDS was added in the gradient slab gel aiming to dissociate noncovalently bound proteins/polypeptides (Type-II 2-DE). Totally 169 CBB-stained spots on a micro-2-DE gel were numbered and subjected to polypeptide assignment using MALDI-MS-PMF. One hundred sixty spots out of the 169 provided significant match (p <0.05) with polypeptides in databases. Comparisons of the results of polypeptide assignment on the two 2-DE patterns indicated that 10 polypeptides in 20 stained spots on the Type-I 2-DE pattern [1] shifted toward low-molecular-weight positions on the Type-II 2-DE pattern, demonstrating the presence of noncovalent interactions. Seventeen polypeptides in 38 stained spots were only assigned on the Type-II 2-DE gel, which could mostly be accounted for by the disruption of noncovalent protein-protein interactions in the presence of SDS, i.e., protein/polypeptide complexes which might form smear bands on the Type-I 2-DE gel dissociate to form clear spots on the Type-II 2-DE gel. The method employed here, comparisons of nondenaturing and denaturing 2-DE maps with polypeptide assignment by MALDI-MS-PMF, would enable the simultaneous detection of multiple noncovalent interactions in complex protein/polypeptide systems.     

Analysis of protein/polypeptide interactions in human plasma using nondenaturing micro-2-DE followed by 3-D SDS-PAGE and MS

Previously, we have reported on the analysis of human plasma proteins on a nondenaturing micro-2-DE (mu2-DE) gel, using in-gel digestion followed by MALDI-MS and PMF [1]. Many of the spots on the mu2-DE gel showed apparent masses much larger than the calculated masses of their assigned polypeptides, suggesting noncovalent or covalent interactions between the polypeptides. In the present study, we aimed to further analyze the plasma protein spots on a nondenaturing mu2-DE gel, on which protein/polypeptide interactions have been suggested. The proteins in the spots were extracted under alkaline conditions and subjected to 3-D separation using SDS-PAGE in microslab gel format (muSDS gel) with or without the sample treatment of reduction-alkylation. The clear bands in each lane of the muSDS gels demonstrated the successful extraction of proteins from the relevant gel spot and visualized the relative contents of the polypeptides in the spot. Most of the bands were assigned by in-gel digestion followed by MALDI-MS and PMF (MASCOT/Swiss-Prot). The large discrepancy between the apparent mass value of a protein spot and the estimated mass values of the polypeptide bands on a nonreducing muSDS gel strongly suggested noncovalent polypeptide interactions. The differences in the polypeptide separation patterns on the muSDS gels, between with and without the treatment of reduction-alkylation, confirmed polypeptide disulfide bonding. The method employed here, aiming to integrate information on the proteins separated on nondenaturing 2-DE gels with that on the interactions between polypeptides, would help the comprehensive understanding of complex protein systems.     

Mass spectrometric characterization of the zein protein composition in maize flour extracts upon protein separation by SDS‐PAGE and 2D gel electrophoresis

Highly homogenous α zein protein was isolated from maize kernels in an environment‐friendly process using 95% ethanol as solvent. Due to the polyploidy and genetic polymorphism of the plant source, the application of high resolution separation methods in conjunction with precise analytical methods, such as MALDI‐TOF‐MS, is required to accurately estimate homogeneity of products that contain natural zein protein. The α zein protein product revealed two main bands in SDS‐PAGE analysis, one at 25 kDa and other at 20 kDa apparent molecular mass. Yet, high resolution 2DE revealed approximately five protein spot groups in each row, the first at ca. 25 kDa and the second at ca. 20 kDa. Peptide mass fingerprinting data of the proteins in the two dominant SDS‐PAGE bands matched to 30 amino acid sequence entries out of 102 non‐redundant data base entries. MALDI‐TOF‐MS peptide mapping of the proteins from all spots indicated the presence of only α zein proteins. The most prominent ion signals in the MALDI mass spectra of the protein mixture of the 25 kDa SDS gel band after in‐gel digestion were found at m/z 1272.6 and m/z 2009.1, and the most prominent ion signals of the protein mixture of the 20 kDa band after in‐gel digestion were recorded at m/z 1083.5 and m/z 1691.8. These ion signals have been found typical for α zein proteins and may serve as marker ion signals which upon chymotryptic digestion reliably indicate the presence of α zein protein in two hybrid corn products.     

Native protein mapping and visualization of protein interactions in the area of human plasma high‐density lipoprotein by combining nondenaturing micro 2DE and quantitative LC‐MS/MS

A human plasma sample was subjected to nondenaturing micro 2DE and a gel area (5 mm × 18 mm) that includes high‐density lipoprotein (HDL) was cut into 1 mm × 1 mm squares, then the proteins in the 90 gel pieces were analyzed by quantitative LC‐MS/MS. Grid‐cutting of the gel was employed to; (i) ensure the total analysis of the proteins in the area, (ii) standardize the conditions of analysis by LC‐MS/MS, (iii) reconstruct the protein distribution patterns from the quantity data. Totally 154 proteins were assigned in the 90 gel pieces and the quantity distribution of each was reconstructed as a color density pattern (a native protein map). The map of apolipoprotein (Apo) A‐I showed a wide apparent mass distribution characteristic to HDL and was compared with the maps of the other 153 proteins. Eleven proteins showed maps of wide distribution that overlapped with the map of Apo A‐I, and all have been reported to be the components of HDL. Further, seven minor proteins associated with HDL were detected at the gel positions of high Apo A‐I quantity. These results for the first time visualized the localization of HDL apolipoproteins on a nondenaturing 2DE gel and strongly suggested their interactions.     

Analysis of low‐density lipoprotein‐associated proteins using the method of digitized native protein mapping

The method of digitized native protein mapping, combining nondenaturing micro 2DE, grid gel‐cutting, and quantitative LC‐MS/MS (in data‐independent acquisition mode, or MS^E), was improved by using a new MS/MS mode, ion mobility separation enhanced‐MS^E (HDMS^E), and applied to analyze the area of human plasma low‐density lipoprotein (LDL). An 18 mm × 4.8 mm rectangular area which included LDL on a nondenaturing micro 2D gel of human plasma was grid‐cut into 72 square gel pieces and subjected to quantitative LC‐MS/MS. Compared with MS^E, HDMS^E showed significantly higher performance, by assigning 50% more proteins and detecting each protein in more squares. A total of 253 proteins were assigned with LC‐HDMS^E and the quantity distribution of each was reconstructed as a native protein map. The maps showed that Apo B‐100 was the most abundant protein in the grid‐cut area, concentrated at pI ca. 5.4–6.1 and apparent mass ca. 1000 kDa, which corresponded to four gel pieces, squares 39–42. An Excel macro was prepared to search protein maps which showed protein quantity peaks localized within this concentrated region of Apo B‐100. Twenty‐two proteins out of the 252 matched this criterion, in which 19 proteins have been reported to be associated with LDL. This method only requires several microliters of a plasma sample and the principle of the protein separation is totally different from the commonly used ultracentrifugation. The results obtained by this method would provide new insights on the structure and function of LDL.     

High-resolution 2-DE for resolving proteins, protein adducts and complexes in plasma

A 2-DE system has been devised in which proteins are first separated in their native state followed by separation according to mass under denaturing conditions (Nat/SDS-PAGE). Hydrophilic properties of the gel and the presence of dihydroxybisacrylamide in the first dimension allowed a good resolution for high-molecular-weight proteins and maintained interactions. With this method 252 plasma spots have been resolved and 140 have been characterized by MS as isoforms of 60 proteins, a relevant part of which (12) were not detected by traditional 2-D gels or by other nondenaturing 2-D techniques. The list includes complement factors (C4d, C7), coagulation factors (coagulation factor II, fibrin beta), apolipoproteins (apolipoprotein B) and cell debris (vinculin, gelsolin, tropomyosin, dystrobrevin beta, fibrinectin I). Nat/SDS PAGE also allowed separation of nicked forms of albumin, Apo B100 and alpha2-macroglobulin and showed the presence of atypical albumin adducts corresponding to post-translational and oxidation products. Our system provides therefore new tools for resolving proteins, protein aggregates and complexes and amplifies the potentiality of traditional electrophoretic analysis.     

Proteomics of cypress pollen allergens using double and triple one-dimensional electrophoresis

Italian cypress (Cupressus sempervirens, Cups) pollen causes allergic diseases in inhabitants of many of the cities surrounding the Mediterranean basin. However, allergens of Cups pollen are still poorly known. We introduce here a novel proteomic approach based on double one‐dimensional gel electrophoresis (D1‐DE) as an alternative to the 2‐DE immunoblot, for the specific IgE screening of allergenic proteins from pollen extracts. The sequential one‐dimensional combination of IEF and SDS‐PAGE associated with IgE immunoblotting allows a versatile multiplexed immunochemical analysis of selected groups of allergens by converting a single protein spot into an extended protein band. Moreover, the method appears to be valuable for MS/MS identification, without protein purification, of a new Cups pollen allergen at 43 kDa. D1‐DE immunoblotting revealed that the prevalence of IgE sensitization to this allergen belonging to the polygalacturonase (PG) family was 70% in tested French allergic patients. In subsequent triple one‐dimensional gel electrophoresis, the Cups pollen PG was shown to promote lectin‐based protein‐protein interactions. Therefore, D1‐DE could be used in routine work as a convenient alternative to 2‐DE immunoblotting for the simultaneous screening of allergenic components under identical experimental conditions, thereby saving considerable amounts of sera and allergen extracts.     

The proteome of lentil (Lens culinaris Medik.) seeds: Discriminating between landraces

Lentil (Lens culinaris Medik.) is one of the most ancient crops of the Mediterranean region used for human nutrition; an extensive differentiation of L. culinaris over millennia has resulted in a number of different landraces. As a consequence of environmental and socio‐economic issues, the disappearance of many of them occurred in more recent times. To investigate the potential of proteomics as a tool in phylogenetic studies, testing the possibility to identify specific markers of different plant landraces, 2‐D gel electrophoretic maps of mature seeds were obtained from seven lentil populations belonging to a local ecotype (Capracotta) and five commercial varieties (Turca Rossa, Canadese, Castelluccio di Norcia, Rascino and Colfiorito). 2‐DE analysis resolved hundreds of protein species in each lentil sample, among which only 122 were further identified by MALDI‐TOF PMF and/or nanoLC‐ESI‐LIT‐MS/MS, probably as a result of the poor information available on L. culinaris genome. A comparison of these maps revealed that 103 protein spots were differentially expressed within and between populations. The multivariate statistical analyses carried out on these variably expressed spots showed that 24 protein species were essential for population discrimination, thus determining their proposition as landrace markers. Besides providing the first reference map of mature lentil seeds, our data confirm previous studies based on morphological/genetic observations and further support the valuable use of proteomic techniques as phylogenetic tool in plant studies.     

Preventing the mixed detergent micelle effect in two‐dimensional electrophoresis on Tris‐Tricine gels

Application of Tris‐N‐[Tris(hydroxymethyl)methyl]glycine gels for 2DE is hampered by formation of mixed CHAPS–SDS micelles resulting in typical swirling pattern in the low mass range, which makes reliable quantitative and qualitative gel evaluation impossible. Modification of 2DE strip equilibration procedure prevented the direct interaction between both detergents during equilibration process, thus substantially improving gel separation.     

MALDI analysis of proteins after extraction from dissolvable ethylene glycol diacrylate cross‐linked polyacrylamide gels

Although the extraction of intact proteins from polyacrylamide gels followed by mass spectrometric molecular mass determination has been shown to be efficient, there is room for alternative approaches. Our study evaluates ethylene glycol diacrylate, a cleavable cross‐linking agent used for a new type of dissolvable gels. It attains an ester linkage that can be hydrolyzed in alkali conditions. The separation performance of the new gel system was tested by 1D and 2D SDS‐PAGE using the outer chloroplast envelope of Pisum sativum as well as a soluble protein fraction of human lymphocytes, respectively. Gel spot staining (CBB), dissolving, and extracting were conducted using a custom‐developed workflow. It includes protein extraction with an ammonia–SDS buffer followed by methanol treatment to remove acrylamide filaments. Necessary purification for MALDI‐TOF analysis was implemented using methanol–chloroform precipitation and perfusion HPLC. Both cleaning procedures were applied to several standard proteins of different molecular weight as well as ‘real’ biological samples (8–75 kDa). The protein amounts, which had to be loaded on the gel to detect a peak in MALDI‐TOF MS, were in the range of 0.1 to 5 μg, and the required amount increased with increasing mass.     

A competent extraction method of plant proteins for 2-D gel electrophoresis

The efficient extraction of high‐quality proteins is a key factor for a successful proteomic analysis approach. In the method suggested here, absolute ethanol containing 10 mM DTT was used to precipitate the proteins in plant tissue homogenates followed by their resuspension in a urea‐/thiourea‐ and NP‐40‐containing solution. Protein profiles were examined on pH 3–11 non‐linear IEF strips and SDS‐PAGE and compared with extracts using the established method of acetone‐10% TCA/0.07% 2‐mercaptoethanol precipitation (V. Méchin et al., Methods Mol. Biol. 2006, 355, 1–8). In addition to protein profile similarity for the two extracts, the acidic part of the acetone containing 10% TCA/0.07% 2‐mercaptoethanol extraction showed protein spots with high molecular weight in the range of 250–150 kDa, while the ethanol containing 10 mM DTT extracts indicated extra proteins spots at the basic part of the gels with molecular weights in the range of 25–15 kDa. The MALDI‐TOF‐MS of differential spots from acetone containing 10% TCA/0.07% 2‐mercaptoethanol precipitation method and absolute ethanol containing 10mM DTT indicated no similarity, ruling out the possibility that the two clusters shown represent identical proteins. The described method is easy in implementation, chemicals used are less toxic and proteins are easier to resuspend therefore presents an additional choice to implement towards finding the optimum method for extraction.     

Optimization of large gel 2D electrophoresis for proteomic studies of skeletal muscle

We describe improved methods for large format, two-dimensional gel electrophoresis (2DE) that improve protein solubility and recovery, minimize proteolysis, and reduce the loss of resolution due to contaminants and manipulations of the gels, and thus enhance quantitative analysis of protein spots. Key modifications are: (i) the use of 7 M urea and 2 M thiourea, instead of 9 M urea, in sample preparation and in the tops of the gel tubes; (ii) standardized deionization of all solutions containing urea with a mixed bed ion exchange resin and removal of urea from the electrode solutions; and (iii) use of a new gel tank and cooling device that eliminate the need to run two separating gels in the SDS dimension. These changes make 2DE analysis more reproducible and sensitive, with minimal artifacts. Application of this method to the soluble fraction of muscle tissues reliably resolves ~1800 protein spots in adult human skeletal muscle and over 2800 spots in myotubes.     

Staining of proteins for 2D SDS‐PAGE using Coomassie Blue—speed versus sensitivity?

Several new fast staining protocols for the visualization of proteins separated by SDS‐PAGE utilizing Coomassie Blue staining (CBS) have been described in literature. The sensitivity of a newly designed staining protocol is usually estimated using 1D SDS‐PAGE of serially diluted protein samples. However, this approach is not predictive and satisfactory for 2D SDS‐PAGE capable of resolving hundreds or thousands of different proteins in a single analysis. In this work, a new fast staining protocol recently introduced by Dong et al. (PLoS One 2011, 6, e22394) was compared to colloidal CBS. The number of detectable spots in 2D SDS‐PAGE of identical blood plasma samples in repeated runs was chosen as a sensitivity criterion. Further, the influence of gel boiling on the subsequent protein identification by MS was investigated. In spite of its advantages, the staining protocol according to Dong et al. (PLoS One 2011, 6, e22394) seems to be less sensitive than colloidal Coomassie staining when the number of detected spots is the evaluating criterion. No obvious influence of gel boiling on the protein identification was observed.     

Combination of virtual and experimental 2DE together with ESI LC‐MS/MS gives a clearer view about proteomes of human cells and plasma

Virtual and experimental 2DE coupled with ESI LC‐MS/MS was introduced to obtain better representation of the information about human proteome. The proteins from HEPG2 cells and human blood plasma were run by 2DE. After staining and protein spot identification by MALDI‐TOF MS, the protein maps were generated. The experimental physicochemical parameters (pI/Mw) of the proteoforms further detected by ESI LC‐MS/MS in these spots were obtained. Next, the theoretical pI and Mw of identified proteins were calculated using program Compute pI/Mw ( http://web.expasy.org/compute_pi/pi_tool‐doc.html ). Accordingly, the relationship between theoretical and experimental parameters was analyzed, and the correlation plots were built. Additionally, virtual/experimental information about different protein species/proteoforms from the same genes was extracted. As it was revealed from the plots, the major proteoforms detected in HepG2 cell line have pI/Mw parameters similar to theoretical values. In opposite, the minor protein species have mainly very different from theoretical pI and Mw parameters. A similar situation was observed in plasma in much higher degree. It means that minor protein species are heavily modified in cell and even more in plasma proteome.     

A comparative analysis of human plasma and serum proteins by combining native PAGE,whole‐gel slicing and quantitative LC‐MS/MS: Utilizing native MS‐electropherograms in proteomic analysis for discovering structure and interaction‐correlated differences

MS identification has long been used for PAGE‐separated protein bands, but global and systematic quantitation utilizing MS after PAGE has remained rare and not been reported for native PAGE. Here we reported on a new method combining native PAGE, whole‐gel slicing and quantitative LC‐MS/MS, aiming at comparative analysis on not only abundance, but also structures and interactions of proteins. A pair of human plasma and serum samples were used as test samples and separated on a native PAGE gel. Six lanes of each sample were cut, each lane was further sliced into thirty‐five 1.1 mm × 1.1 mm squares and all the squares were subjected to standardized procedures of in‐gel digestion and quantitative LC‐MS/MS. The results comprised 958 data rows that each contained abundance values of a protein detected in one square in eleven gel lanes (one plasma lane excluded). The data were evaluated to have satisfactory reproducibility of assignment and quantitation. Totally 315 proteins were assigned, with each protein assigned in 1–28 squares. The abundance distributions in the plasma and serum gel lanes were reconstructed for each protein, named as “native MS‐electropherograms”. Comparison of the electropherograms revealed significant plasma‐versus‐serum differences on 33 proteins in 87 squares (fold difference > 2 or < 0.5, p < 0.05). Many of the differences matched with accumulated knowledge on protein interactions and proteolysis involved in blood coagulation, complement and wound healing processes. We expect this method would be useful to provide more comprehensive information in comparative proteomic analysis, on both quantities and structures/interactions.