Specific ionic conduction in poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–Li salt complexes under high‐pressure CO2

We measured the ionic conductivity of amorphous poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–lithium salt complexes under a CO₂ pressure varying from 0.1 to 20 MPa. The pressure dependence of the conductivity was positive, and the conductivity was higher than that under an inert gas such as N₂. The ion‐conductive behavior has been modeled using both the Vogel–Tammann–Fulcher (VTF) equation and activation volume theory. The calculated parameters of the VTF equation show that CO₂ that had permeated into the PMEO matrix acts as solvent molecules to dissolve ions and lower the glass transition temperature at high pressures. The ionic conduction in PMEO complexes under high‐pressure CO₂ was scarcely related to the VTF parameters and activation volume equations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3151–3158, 2005     

Ion gels prepared by in situ radical polymerization of vinyl monomers in an ionic liquid and their characterization as polymer electrolytes

To realize polymer electrolytes with high ionic conductivity, we exploited the high ionic conductivity of an ionic liquid. In situ free radical polymerization of compatible vinyl monomers in a room temperature ionic liquid, 1-ethyl-3-methyl imidazolium bis(trifluoromethane sulfonyl)imide (EMITFSI), afforded a novel series of polymer electrolytes. Polymer gels obtained by the polymerization of methyl methacrylate (MMA) in EMITFSI in the presence of a small amount of a cross-linker gave self-standing, flexible, and transparent films. The glass transition temperatures of the gels, which we named "ion gels", decreased with increasing mole fraction of EMITFSI and behaved as a completely compatible binary system of poly(methyl methacrylate) (PMMA) and EMITFSI. The temperature dependence of the ionic conductivity of the ion gels followed the Vogel-Tamman-Fulcher (VTF) equation, and the ionic conductivity at ambient temperature reached a value close to 10(-2) S cm(-1). Similarly to the behavior of the ionic liquid, the cation in the ion gels diffused faster than the anion. The number of carrier ions, calculated from the Nernst-Einstein equation, was found to increase for an ion gel from the corresponding value for the ionic liquid itself. The cation transference number increased with decreasing EMITFSI concentration due to interaction between the PMMA matrix and the TFSI(-) anion, which prohibited the formation of ion clusters or associates, as was the case for the ionic liquid itself.     

纳米复合全固态聚膦腈电解质

为了进一步提高聚合物电解质的室温离子电导率和锂离子的迁移数,通过对纳米二氧化硅的表面修饰,并采用可聚合的带氧化乙烯-氧化丙烯共聚侧链取代的聚膦腈大单体制备了纳米复合的全固态电解质.通过X射线光电子能谱,扫描电镜,差热扫描分析对纳米复合电解质的性能和形貌进行了分析,并通过交流阻抗考察了电解质与电极间的界面稳定性,用循环伏安表征了电解质的电化学稳定窗口,考察了锂盐含量对电解质离子电导率的影响,测试了电解质的离子电导率随温度的关系,并对锂离子的迁移数进行了测定.研究结果表明,通过纳米复合的方法,提高了聚合物电解质的离子电导率,降低了界面电阻,提高了锂离子迁移率.     

SYNTHESIS AND CHARACTERIZATION OF POLYSILOXANE CONTAINING OLIGO(OXYETHYLENE)SULFATE SALT

Solvent-free polymeric alkali-metal ion conductors, consisting of a comb-like polysiloxane with oligo(oxy-ethylene) side chains and pendant sulfate groups were synthesized by the hydrosilylation of allyl oligo(oxyethylene) sulfatesalt and allyl methoxy oligo(oxyethylene) with poly(methylhydrosiloxane). The factors influncing the ionic conductivity ofthe resulting polymer such as the electrolyte content and the nature of the alkali-metal were investigated. The temperaturedependence of conductivity was determined, and the ionic conductivity of the polymer follows the Vogel-Tammann-Fulcher(VTF) equation.     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

含[BMIM]Cl-ZnCl2和非质子溶剂的凝胶聚合物电解质的合成

以烯类单体MA、MMA、HEMA为基质,通过原位聚合,合成了同时含离子液体[BMIM]Cl-ZnCl2和非质子溶剂的一系列新型凝胶聚合物电解质,用FTIR、AC、TG等方法对其结构和性能进行了表征。研究表明,聚合物电解质具有复合物结构;[BMIM]Cl-ZnCl2和非质子溶剂PC﹑DMC的加入使聚合物电解质的室温离子电导率大大增加,达2.83×10⁻³ S/cm,且与温度的关系符合VTF方程;聚合物电解质的热分解温度大于275 ℃,显示出良好的热稳定性。     

Osmotic pressure,atomic pressure and the virial equation of state of polymer solutions: Monte Carlo simulations of a bead-spring model

A recently introduced coarse-grained model of polymer chains is studied analyzing various contributions to the pressure as obtained from the virial theorem as a function of chain length N, temperature T and density ϕ. The off-lattice model of the polymer chains has anharmonic springs between the beads, but of finite extensibility, and the Morse-type interaction between beads is repulsive at very short distances and attractive at intermediate distances. Solvent molecules are not explicitly included. It is found that the covalent forces along the chain (modelled by the spring potentials) contribute a negative term to the pressure, irrespective of temperature, which vanishes linearly in ϕ as ϕ → 0. In contrast, both contributions to the pressure due to intrachain nonbonded forces and due to forces between different chains change sign from high temperatures (T ≫ θ, θ the theta-temperature) where they are positive, to low temperature where both parts of the pressure become negative. It is shown that the total pressure has the expected behavior with temperature near the θ-temperature, i.e., Δp ≡ p_tot − k_B · T_p ∼ (T − θ). We study also the concentration and chainlength dependence of the various contributions to the pressure in the good solvent regime and interpret them with scaling predictions.     

Safety-enhanced Polymer Electrolytes with High Ambient-temperature Lithium-ion Conductivity Based on ABA Triblock Copolymers

Liquid electrolytes used in lithium-ion batteries suffer from leakage,flammability,and lithium dendrites,making polymer electrolyte a potential alternative.Herein,a series of ABA triblock copolymers(ABA-x)containing a mesogen-jacketed liquid crystalline polymer(MJLCP)with a polynorbornene backbone as segment A and a second polynorbornene-based polymer having poly(ethylene oxide)(PEO)side chains as segment B were synthesized through tandem ring-opening metathesis polymerizations.The block copolymers can self-assemble into ordered morphologies at 200℃.After doping of lithium salts and ionic liquid(IL),ABA-x self-assembles into cylindrical structures.The MJLCP segments with a high glass transition temperature and a stable liquid crystalline phase serve as physical crosslinking points,which significantly improve the mechanical performance of the polymer electrolytes.The ionic conductivity of ABA-x/lithium salt/IL is as high as 10-3 S·cm-1 at ambient temperature owing to the high IL uptake and the continuous phase of conducting PEO domains.The relationship between ionic conductivity and temperature fits the Vogel-Tamman-Fulcher(VTF)equation.In addition,the electrolyte films are flame retardant owing to the addition of IL.The polymer electrolytes with good safety and high ambient-temperature ionic conductivity developed in this work are potentially useful in solid lithium-ion batteries.     

Study of microstructural characterization and ionic conductivity of a chemical-covalent polyether-siloxane hybrid doped with LiClO4

The chemical-covalent polyether-siloxane hybrids (EDS) doped with various amounts of LiClO4 salt were characterized by FT-IR, DSC, TGA, and solid-state NMR spectra as well as impedance measurements. These observations indicate that different types of complexes by the interactions of Li+ and ClO4- ions are formed within the hybrid host, and the formation of transient cross-links between Li+ ions and ether oxygens results in the increase in T(g) of polyether segments and the decrease in thermal stability of hybrid electrolyte. Initially a cation complexation dominated by the oxirane-cleaved cross-link site and PEO block is present, and after the salt-doped level of O/Li+ = 20, the complexation through the PPO block becomes more prominent. Moreover, a significant degree of ionic association is examined in the polymer-salt complexes at higher salt uptakes. A VTF-like temperature dependence of ionic conductivity is observed in all of the investigated salt concentrations, implying that the diffusion of charge carrier is assisted by the segmental motions of the polymer chains. The behavior of ion transport in these hybrid electrolytes is further correlated with the interactions between ions and polymer host.     

Segmental mobility and relaxation processes of Fe2O3 nanoparticle-loaded fast ionic transport nanocomposite gel polymer electrolyte

The interaction of Fe₂O₃ nanoparticles emphasized between poly(propylene glycol) (PPG 4000) and silver triflate (AgCF₃SO₃) on the conformal changes of coordination sites and the electrochemical properties have been investigated. On the influence of Fe₂O₃ nanoparticles distribution, the interactions between the ether oxygen in C–O–C of the polymer chain with Ag⁺ ion as a result of bond strength of the C–O–C stretching vibration, the end group effect has been examined by Fourier transform infrared (FT-IR) spectroscopy. The formation of transient cross-links between polymer chains and filler particles appears to be a characteristic change in the glass transition temperature (T _g) and enhance the effective number of cations as well. The strength of ion–polymer interactions was revealed by the transport of ions, t _Ag+, and found to be in the range of 0.42–0.50, and the ionic conductivity was ascertained by complex impedance analysis with a maximum of 9.2?×?10^?4 S cm^?1 at 298 K with a corresponding concentration of 10 wt% Fe₂O₃ nanoparticles. The temperature dependence of conductivity has been examined based on the Vogel–Tammann–Fulcher (VTF) equation, thereby suggesting the segmental chain motion and free volume changes. From the impedance data, both the dielectric and modulus behaviours have been revealed and both were well correlated as a function of frequency.     

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries

Solid polymer electrolytes with relatively low ionic conductivity at room temperature and poor mechanical strength greatly restrict their practical applications. Herein, we design semi-interpenetrating network polymer (SNP) electrolyte composed of an ultraviolet-crosslinked polymer network (ethoxylated trimethylolpropane triacrylate), linear polymer chains (polyvinylidene fluoride-co-hexafluoropropylene) and lithium salt solution to satisfy the demand of high ionic conductivity, good mechanical flexibility, and electrochemical stability for lithium metal batteries. The semi-interpenetrating network has a pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity. Thanks to these advantages, the SNP electrolyte shows a high ionic conductivity (1.12 mS cm⁻¹ at 30 °C), wide electrochemical stability window (4.6 V vs. Li⁺/Li), good bendability and shape versatility. The promoted ion transport combined with suppressed impedance growth during cycling contribute to good cell performance. The assembled quasi-solid-state lithium metal batteries (LiFePO₄/SNP/Li) exhibit good cycling stability and rate capability at room temperature.     

Molecular dynamics simulation of polymer electrolytes based on poly(ethylene oxide) and ionic liquids. II. Dynamical properties

Dynamical properties of polymer electrolytes based on poly(ethylene oxide) (PEO) and ionic liquids of 1-alkyl-3-methylimidazolium cations were calculated by molecular dynamics simulations with previously proposed models [L. T. Costa and M. C. Ribeiro, J. Chem. Phys. 124, 184902 (2006)]. The effect of changing the ionic liquid concentration, temperature, and the 1-alkyl-chain lengths, [1,3-dimethylimidazolium]PF(6) and [1-butyl-3-methylimidazolium]PF(6) ([dmim]PF(6) and [bmim]PF(6)), was investigated. Cation diffusion coefficient is higher than those of anion and oxygen atoms of PEO chains. Ionic mobility in PEO[bmim]PF(6) is higher than in PEO[dmim]PF(6), so that the ionic conductivity kappa of the former is approximately ten times larger than the latter. The ratio between kappa and its estimate from the Nernst-Einstein equation kappa/kappa(NE), which is inversely proportional to the strength of ion pairs, is higher in ionic liquid polymer electrolytes than in polymer electrolytes based on inorganic salts with Li(+) cations. Calculated time correlation functions corroborate previous evidence from the analysis of equilibrium structure that the ion pairs in ionic liquid polymer electrolytes are relatively weak. Structural relaxation at distinct spatial scales is revealed by the calculation of the intermediate scattering function at different wavevectors. These data are reproduced with stretched exponential functions, so that temperature and wavevector dependences of best fit parameters can be compared with corresponding results for polymer electrolytes containing simpler ions.     

一种梳状高分子固体电解质的分子运动和离子导电性

用交流复阻抗谱和动态粘弹谱等对交替马来酸酐共聚物多缩乙二醇酯衍生物及其ＬｉＣｌＯ４盐复合物进行了研究．结果表明，在Ｌｉ／ＥＯ＝０．０７—０．０４２范围内，从１７３Ｋ到３７３Ｋ，本聚合物一高氯酸锂复合体系的动态粘弹谱存在着两个明显的转变，其中β转变归属于ＰＥＯ的侧链玻璃化转变，转变温度随ＬｉＣｌＯ４盐浓度的增加而增加。α转变归属于主链玻璃化转变，在Ｌｉ／ＥＯ＝０．０２８时有极大值。盐浓度与电导率的关系与通常不一样，在所研究盐浓度范围内观察到两个峰，其一在Ｌｉ／ＥＯ＜０．０１４，另一峰在Ｌｉ／ＥＯ＝０．０２８．电导率与温度的依赖关系不符合Ａｒｒｈｅｎｉｕｓ行为；以ｌｇσ对１／Ｔ－Ｔ０作图，用侧链玻璃化转变温度Ｔβ作Ｔ０时，呈典型的ＶＴＦ行为。该体系室温电导率最高可达６×１０－６ｓ／ｃｍ．     

THERMAL BEHAVIOR AND IONIC CONDUCTIVITY OF POLY[LITHIUM-N(4-SULFO-PHENYL) MALEIMIDE -CO-METHOXY OLIGO(OXYETHYLENE) METHACRYLATE]

Poly[lithium-N(4-sulfophenyl) maleimide -co- methoxy oligo-(oxyethylene) methacrylates] [P(LiSMOE_n)s] with three different oligoether side chains and different salt concentrations were synthesized. The copolyelectrolytes are essentially random in structure, with blocks of methoxy oligo(oxyethylene) meth-acrylate (MOE_nM) recurring sporadically in between the salt units of N(4-sulfophenyl) maleimide. They all show two glass transitions in the temperature range of ?100 to 100°C. The first one below ?30°C is assigned to the oligo(oxyethylene) side chain (T _g1), while the second one located between 20 and 50°C is attributed to the main chain of the polymer host (T _g2). The maximum ionic conductivity of the copolymer electrolytes, 1.6 × 10^?7 S cm^?1 at 25°C, occurs at lithium salt concentration [Li⁺]/[EO] = 2.2 mol%. The ionic conductive behavior of the copolyelectrolytes follows the Vogel-Tammann-Fulcher (VTF) equation. Moreover, a special VTF behavior exists in the copolymers with shorter oligoether side chain and higher salt concentration. Sweep voltammetric results indicate that these copolyelectrolytes have a good electrochemical stability window.     

聚合物-锂改性蒙脱石复合材料离子迁移

以聚合物（ＰＥＯ,ＰＥＯ－ＰＭＭＡ）和锂改性蒙脱石作为主要原料,采用聚合物粉末直接熔融嵌入的方法,制备聚合物－蒙脱石复合材料．利用ＮＭＲ、ＡＣ阻抗等分析方法探讨了复合材料中聚合物链对 Ｌｉ＋离子迁移的影响．结果表明,聚合物（ＰＥＯ）嵌入蒙脱石层间,层间聚合物链的无序度增大,有利于Ｌｉ＋离子迁移．ＰＭＭＡ引入对ＰＥＯ链的改性,进一步加大聚合物链的无序度,更易于层间Ｌｉ＋离子迁移;复合材料的常温离子电导率接近１０－２Ｓ·ｃｍ－１,且具有良好的温度稳定性．     

Conductivities and transport properties of gelled electrolytes with and without an ionic liquid for Li and Li-ion batteries

Conductivity and transport properties have been determined for gelled polymer electrolytes of three compositions: a base PVdF-polymer gel with organic carbonate solvents as plasticizers and LiN(SO(2)C(2)F(5))(2) electrolyte, a second polymer electrolyte with 5 mass % 1-ethyl-3-methylimidazolium bisperfluoroethylsulfonyl imide (EMI-BETI) added to the base polymer electrolyte, and a third PVdF polymer electrolyte using only EMI-BETI as the plasticizer. Conductivities were studied over the temperature range +25 to -40 degrees C, and for all three gels, the temperature dependence of the conductivities was found to follow the VTF equation, which is consistent with the free volume model for ion transport. For the gel containing 5 mass % EMI-BETI, transport numbers were determined from +50 to -20 degrees C and were found to decrease as the temperature decreased. Although there are no theoretical models to treat and interpret the temperature dependence of transport numbers, we found that a modified VTF equation resulted in an excellent fit to the temperature dependence of the transport number, which is another confirmation of a free volume model for transport in these gelled polymer electrolytes.     

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. In addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.     

Gelation mechanism of ionic polysaccharides

Experimental results obtained by membrane equilibria, osmotic pressure, viscosity and circular dichroism measurements on alginate and pectate solutions in the presence of Ca²⁺ ions are presented. From equilibrium dialysis data both electrostatic and cooperative interactions seem to describe the binding process of Ca²⁺ ions onto polymer chains. An increase of the number-average molecular weight M̄_n for both poly-saccharides with calcium ion concentration is observed. An increase of polymer dimensions can well account for the observed increase of the intrinsic viscosity [η] with bound Ca²⁺ ion concentration at several ionic strengths.     

Dispersions of polymer ionomers: I

The principal subject discussed in the current paper is the effect of ionic functional groups in polymers on the formation of nontraditional polymer materials, polymer blends or polymer dispersions. Ionomers are polymers that have a small amount of ionic groups distributed along a nonionic hydrocarbon chain. Specific interactions between components in a polymer blend can induce miscibility of two or more otherwise immiscible polymers. Such interactions include hydrogen bonding, ion-dipole interactions, acid-base interactions or transition metal complexation. Ion-containing polymers provide a means of modifying properties of polymer dispersions by controlling molecular structure through the utilization of ionic interactions. Ionomers having a relatively small number of ionic groups distributed usually along nonionic organic backbone chains can agglomerate into the following structures: (1) multiplets, consisting of a small number of tightly packed ion pairs; and (2) ionic clusters, larger aggregates than multiplets. Ionomers exhibit unique solid-state properties as a result of strong associations among ionic groups attached to the polymer chains. An important potential application of ionomers is in the area of thermoplastic elastomers, where the associations constitute thermally reversible cross-links. The ionic (anionic, cationic or polar) groups are spaced more or less randomly along the polymer chain. Because in this type of ionomer an anionic group falls along the interior of the chain, it trails two hydrocarbon chain segments, and these must be accommodated sterically within any domain structure into which the ionic group enters. The primary effects of ionic functionalization of a polymer are to increase the glass transition temperature, the melt viscosity and the characteristic relaxation times. The polymer microstructure is also affected, and it is generally agreed that in most ionomers, microphase-separated, ion-rich aggregates form as a result of strong ion-dipole attractions. As a consequence of this new phase, additional relaxation processes are often observed in the viscoelastic behavior of ionomers. Light functionalization of polymers can increase the glass transition temperature and gives rise to two new features in viscoelastic behavior: (1) a rubbery plateau above T(g) and (2) a second loss process at elevated temperatures. The rubbery plateau was due to the formation of a physical network. The major effect of the ionic aggregate was to increase the longer time relaxation processes. This in turn increases the melt viscosity and is responsible for the network-like behavior of ionomers above the glass transition temperature. Ionomers rich in polar groups can fulfill the criteria for the self-assembly formation. The reported phenomenon of surface micelle formation has been found to be very general for these materials.     

Properties of Star-Branched Polymer Chains Near a Surface

We considered two model systems of star-branched polymers near an impenetrable surface. The model chains were constructed on a simple cubic lattice. Each star polymer consisted of f = 3 arms of equal length and the total number of segments was up to 799. The excluded volume effect was included into these models only and therefore the system was studied at good solvent conditions. In the first model system polymer chain was terminally attached with one arm to the surface. The grafted arm could slide along the surface. In the second system the star-branched chain was adsorbed on the surface and the strength of adsorption was were varied. The simulations were performed using the dynamic Monte Carlo method with local changes of chain conformations. The internal and local structures of a polymer layer were determined. The lateral diffusion and internal mobility of star-branched chains were studied as a function of strength of adsorption and the chain length. The lateral diffusion and internal mobility of star-branched chains were studied as a function of strength of adsorption and the chain length. It was shown that the behavior of grafted and weakly adsorbed chains was similar to that of a free three-dimensional polymer, while the strongly adsorbed chains behave as a two-dimensional system.