Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Radiative properties of Eu in BaGa2S4

A photoluminescence study of the blue-green emitting BaGa₂S₄:Eu²⁺ phosphor is reported. Diffuse reflectance, excitation and emission spectra were examined with the aim to enlarge the fundamental knowledge about the emission of the Eu²⁺ rare earth ion in this lattice. The thermal dependence of the radiative properties and the influence of the Eu²⁺ concentration were investigated. The Stokes shift, the crystal field splitting and the activation energy of the thermal quenching were determined. By combining these results with data available in literature, we discussed the radiative properties of the BaAl₂S₄:Eu²⁺ blue phosphor in relation with those determined in this study for the isostructural BaGa₂S₄:Eu²⁺ phosphor.     

Synthesis and luminescence properties of SrAl2O4:Eu,Dy nanosheets

We report an effective method to synthesize SrAl₂O₄:Eu²⁺,Dy³⁺ nanosheets. Sheet-like precursors were firstly synthesized by the solvothermal method, and acetate was used as the raw material. Then the final products were obtained by calcinating the precursor in a weak reductive atmosphere of H₂. The crystal structure and particle morphology were investigated by X-ray diffraction (XRD) patterns, field-emission scanning electron microscopy and transmission electron microscopy (FE-SEM and TEM) , respectively. A possible growth mechanism was proposed to reveal the formation process. Luminescence properties of the SrAl₂O₄:Eu²⁺,Dy³⁺ long-lasting phosphor were analyzed by measuring the excitation spectra, the emission spectra, the afterglow decay curve and the thermoluminescence curve. Both the photoluminescence (PL) spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties compared with the phosphors prepared by using nitrates as the raw material. Furthermore, the photoluminescence intensity was even a little higher than commercial phosphors.     

Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Structural, luminescent and thermal properties of blue SrAl2O4:Eu, Dy phosphor filled low-density polyethylene composites

The performance of nanophase luminophors is usually compromised by environmentally induced degradation. In this study, composites of low density polyethylene (LDPE) with various concentrations of the blue-emitting europium and dysprosium co-doped strontium aluminate (SrAl₂O₄:Eu²⁺,Dy³⁺) phosphor were investigated. The blue long-lasting phosphorescence of the composites was observed in the dark after removal of the excitation light. X-ray diffraction analysis revealed the presence of the SrAl₂O₄ phase in the composites. PL spectra of the composites have two sets of peaks, major broad bands peaking at about 4855 Å and minor ones at wavelengths between 4115 and 4175 Å, attributed to the 4f-5d transition of Eu²⁺. DSC and TGA results show that the introduction of the phosphor in LDPE matrix caused a slight reduction in the crystallinity of LDPE but a significant increase in the stability of the composites.     

Luminescence studies of a combustion-synthesized blue–green BaAlxOy:Eu,Dy nanoparticles

Blue–green emitting BaAl_xO_y:Eu²⁺,Dy³⁺ phosphor was synthesized by the combustion method. The influence of various parameters on the structural, photoluminescence (PL) and thermoluminescence (TL) properties of the phosphor were investigated by various techniques. Phosphor nanocrystallites with high brightness were obtained without significantly changing the crystalline structure of the host. In the PL studies, broad-band excitation and emission spectra were observed with major peaks at 340 and 505 nm, respectively. The observed afterglow is ascribed to the generation of suitable traps due to the presence of the co-doped Dy³⁺ ions. Though generally broad, the peak structure of the TL glow curves obtained after irradiation with UV light was non-uniform with suggesting the contribution to afterglow from multiple events at the luminescent centers. Further insight on the afterglow behavior of the phosphor was deduced from TL decay results.     

Photoluminescence of Y2O3:Eu thin film phosphors by sol-gel deposition and rapid thermal annealing

Y₂O₃:Eu³⁺ phosphor films have been developed by using the sol-gel process. Comprehensive characterization methods such as Photoluminescent (PL) spectroscopy, X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy were used to characterize the Y₂O₃:Eu³⁺ phosphor films. In this experiment, the XRD profiles show that the Y₂O₃:Eu³⁺ phosphor films crystallization temperature and optimum annealing temperature occur at about 650 and 750 °C, respectively. The optimum dopant concentration is 12 mol% Eu³⁺ and the critical transfer distance (R_c) among Eu³⁺ ions is calculated to be about 0.84 nm. Vacuum environment is more efficient than oxygen and nitrogen to eliminate the OH content and hence yields higher luminescent phosphor films. The PL emission intensity of Y₂O₃:Eu³⁺ phosphor films is also dependent on the annealing time. It was found that the H₂O impurities were effectively eliminated after annealing time of 25 s at 750 °C in vacuum environment. From the experiment results, the schematic energy band diagram of Y₂O₃:Eu³⁺ phosphor films is constructed.     

Effect of Ca and Sr alkaline earth ions on luminescence properties of BaAl12O19:Eu nanophosphor

Nanosized barium aluminate materials was doped by divalent cations (Ca²⁺, Sr²⁺) and Eu²⁺ having nominal compositions Ba_1−xMxAl₁₂O₁₉:Eu (M=Ca and Sr) (x=0.1-0.5), were synthesized by the combustion method. These phosphors were characterized by XRD, scanning electron microscopy-energy-dispersive spectrometry (SEM-EDS) and photoluminescence measurement. The photoluminescence characterization showed the presence of Eu ion in divalent form which gave emission bands peaking at 444 nm for the 320 nm excitation (solid-state lighting excitation), while for 254 nm it gave the same emission wavelength of low intensity (1.5 times) compared to 320 nm excitation. It was also observed that alkaline earth metal (Ca²⁺ and Sr²⁺) dopants increase the intensity of Eu²⁺ ion in BaAl₁₂O₁₉ lattice, thus this phosphor may be useful for solid-state lighting.     

Synthesis and characterization of BaAl2O4:Eu co-doped with different rare earth ions

Combustion method was used in this study to prepare BaAl₂O₄:Eu²⁺ phosphors co-doped with different trivalent rare-earths (Re³⁺=Dy³⁺, Nd³⁺, Gd³⁺, Sm³⁺, Ce³⁺, Er³⁺, Pr³⁺ and Tb³⁺) ions at an initiating temperature of 600 °C. The phosphors were annealed at 1000 °C for 3 h. As confirmed from the X-ray diffraction (XRD) data, both as prepared and post annealed samples crystallized in the well known hexagonal structure of BaAl₂O₄. All samples exhibited bluish-green emission associated with the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ at ∼500 nm. Although the highest intensity was observed from Er³⁺ co-doping, the longest afterglow (due to trapping and detrapping of charge carriers) was observed from Nd³⁺ followed by Dy³⁺ co-doping. The traps responsible for the long afterglow were studied using thermoluminescence (TL) spectroscopy.     

Luminescence of KCaSO4Cl:X, Y (X=Eu or Ce; Y=Dy or Mn) halosulfate material

Polycrystalline KCaSO₄Cl:Eu, Dy, KCaSO₄Cl:Ce, Dy and KCaSO₄Cl:Ce, Mn phosphors prepared by a solid state diffusion method have been studied for its photoluminescence (PL) characteristics. The presence of two overlapping bands at around 400 and 450 nm in the PL emission spectra of the phosphor suggests the presence of Eu²⁺ in the host compound occupying two different lattice sites. The effects of co-doping on the photoluminescence (PL) characteristics of KCaSO₄Cl:Eu or Ce phosphors have been studied. The decrease in peak intensity of the phosphor on co-doping it with Dy gives an insight into the emission mechanism of the phosphors, which involves energy transfer from Eu²⁺→Dy³⁺, Ce³⁺→Dy³⁺ and Ce³⁺→Mn²⁺.     

Synthesis and photoluminescence properties of NaPbB5O9:Dy phosphor materials for white light applications

Given the recent increased interest in phosphor materials and their applications, we analyzed a new NaPbB₅O₉:Dy³⁺ phosphor material with different concentrations of Dy³⁺. In particular, we investigated the crystal structure, morphology, and luminescence properties of these materials. X-ray diffraction analyses confirmed the formation of NaPbB₅O₉:Dy³⁺ phosphor powder. The functional groups present in the phosphor materials were examined by Fourier transform infrared spectroscopy. Scanning electron microscope images showed that the size of the grains was in the micrometer range. Photoluminescence spectra were recorded at different excitation wavelengths for the phosphor materials and we analyzed the variation in the intensity of the emission bands with different concentrations of Dy³⁺ ions. The color co-ordinates were calculated and used to characterize the color of the phosphor. We found that the emission colors of the Dy³⁺-doped NaPbB₅O₉ powders depended on the Dy³⁺ ion doping concentration and the excitation wavelength.     

Enhanced luminescent properties of long-persistent Sr2MgSi2O7:Eu, Dy phosphor prepared by the co-precipitation method

Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were prepared by the (aminopropyl)-triethoxysilane (APTES) co-precipitation method. Effects of synthesis temperature on the crystal characteristics, luminescent properties and afterglow performance of Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors have been discussed in detail and compared with the corresponding commercial product. The experimental results indicated that the sample could be synthesized at a relatively lower temperature and had better performance on the above-mentioned properties using the co-precipitation method.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Tunable luminescent properties by adjusting the Sr/Ba ratio in Sr1.97−xBaxMgSi2O7:Eu0.01, Dy0.02 phosphors

The long afterglow phosphors Sr_1.97−xBa_xMgSi₂O₇:Eu²⁺_0.01, Dy³⁺_0.02 (x=0, 0.4, 0.8, 1.2, 1.6 and 1.97) were synthesized via high temperature solid-state reaction. The phase identification reveals that the crystal plane spacing becomes greater with the decrease in the Sr/Ba ratio. Phase transition occurs when x=1.97. A nonlinear relationship between the emission peak and the crystal plane spacing is obtained with the decrease of the Sr/Ba ratio. This ascribes to the splitting of the 5d level of the Eu²⁺ and the change of the crystal field strength. The duration of the afterglow becomes shorter with the decrease of the Sr/Ba ratio. It may ascribe to deeper trap depth, lower trap concentration and the embarrassment of the transfer of carriers.     

Photoluminescence and gamma-ray irradiation of SrAl2O4:Euand Y2O3:Eu phosphors

Y₂O₃:Eu³⁺ phosphor is a very attractive material for use as a red phosphor in many fields. SrAl₂O₄:Eu²⁺ belongs to long lasting phosphor (LLP) and it is a useful bluish-green luminescence material, which can also be a promising candidate as a simple and easy-to-use radiation detection element for visual display of two dimensional radiation distributions. In the present study, both these two kinds of phosphors were synthesized using high temperature solid state reactions. In our work, the influence of gamma-ray irradiation on the properties of these two kinds of phosphors was studied by comparing photoluminescence, brightness and the decay curve of unirradiated and gamma-ray-irradiated samples. Conclusions from the present work can be briefly summarized as follows. In irradiated samples, the brightness is decreased without sensible change in the wavelength distribution of the luminescence spectrum and in the decay kinetic upon gamma exposure. Moreover, the emission due to Eu³⁺→Eu²⁺ conversion in Y₂O₃:Eu³⁺ phosphors was not observed in our sample after irradiation to high exposure. Also the brightness of SrAl₂O₄:Eu²⁺ phosphor turned out to decrease after the exposition to ionizing radiation while the luminescence wavelength distribution remained unchanged. The reason for the effect of gamma-ray irradiation on the properties of phosphors is also discussed in the paper.     

Photoluminescence in MgxSr1−xAl2O4:Eu, Ndand electron-vibrational interaction in the Eu 5d states

Green phosphor compositions Mg_xSr_1−xAl₂O₄:Eu, Nd (with x=0.05-0.25) were prepared by solid state reaction method. The effect of Mg substitution on photoluminescence characteristics was investigated. The photoluminescence show intense green emission for MgSrAl₂O₄:Eu²⁺, Nd³⁺ with long persistence. This green emission corresponds to transitions from 4f⁶5d¹ to 4f⁷ of Eu²⁺ ion. Comparative analysis of the excitation and emission spectra were used to evaluate the crystal field splitting of the 5d states of Eu²⁺ and the parameters of electron-vibrational interaction, such as Huang-Rhys factor, effective phonon energy, and zero-phonon line position.     

Correlation of photoluminescence of (Y, Ln)VO4:Eu (Ln=Gd and La) phosphors with their crystal structures

We have studied the photoluminescence (PL) of (Y, Ln)VO₄:Eu³⁺ (Ln=La and Gd) phosphors and the correlation of the PL of those phosphor with their crystal structure. It is found that (Y, Gd)VO₄:Eu³⁺ phosphors have the same crystal structure as YVO₄:Eu³⁺, which is tetragonal with a little different lattice parameters. In the case of (Y, La)VO₄:Eu³⁺ phosphors, however, the gradual change from tetragonal to monoclinic structure of host lattice was observed as the amount of La ion increased. To investigate the PL property of (Y, Ln)VO₄:Eu³⁺ (Ln=La and Gd) phosphors, vacuum ultraviolet (VUV) and ultraviolet (UV) excitation were used. The favorable crystal structure for the PL intensity of orthovanadate phosphor under 147 and 254 nm excitation was tetragonal containing Gd ion and under 365 nm excitation was monoclinic containing La ion which might have the lowest site symmetry for Eu³⁺ ion.     

Persistent luminescence dosimetric properties of UV-irradiated SrAl2O4:Eu, Dy phosphor

Current radiation dosimetry methods involve the release of trapped charge carriers in the form of electrons-holes pairs generated by irradiation exposure of the dosimetric materials. Thermal and optical stimulations of the irradiated material freed the trapped charges that eventually recombine with interband centers producing the emission of light. The integrated intensity of the emitted light is proportional to the radiation dose exposure. In this work, we present an UV radiation dosimetry technique based on the characteristic persistence luminescence (PLUM) 4f⁶5d¹→4f⁷ electronic transition of Eu²⁺ ions in SrAl₂O₄:Eu²⁺, Dy³⁺. The dose assessment is carried out by measuring the PLUM signal integrated during a certain time. The PLUM performance of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphor exhibited a linear behavior for the first 50 s of UV irradiation. For higher UV time exposure the behavior is sublinear with no apparent saturation during a 10 min period. The PLUM dosimetry response was performed at 400 nm that corresponds to the main band component of the PLUM excitation spectrum in the 250-500 nm range. The main advantage of a dosimeter device based on the PLUM of SrAl₂O₄:Eu²⁺, Dy³⁺ is that neither thermal nor optical stimulation is required, avoiding the need of cumbersome electronic photo/thermal stimulation equipment. Due to the highly efficient 250-500 nm PLUM response of SrAl₂O₄:Eu²⁺, Dy³⁺, it could have potential application as UV radiation dosimeter in the UV range of grate human health concerns caused by UV solar radiation.     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法