Determining the GaSb/GaAs-(2 × 8) reconstruction

Highly strained thin layers of GaSb/GaAs possess a (2 × 4) reconstruction at low Sb overpressures, and a (2 × 8) reconstruction at high Sb overpressures. While the atomic details of the Sb/GaAs-(2 × 4) are well known, the details of the (2 × 8) are not understood. In this paper, we use density functional theory to analyze possible (2 × 8) structures. Comparing scanning tunneling microscope images from both simulation and experiment and examining the relative energies of possible (2 × 8) structures, we show the α(2 × 8) and β(2 × 8) are the thermodynamically stable surface reconstructions for high Sb content films strained to the GaAs lattice parameter. The α and β(2 × 8) reconstructions are related to the GaAs-α2(2 × 4) and GaAs-β2(2 × 4) through the addition of 2 cations and 8 anions into the trench between adjacent (2 × 4) unit cells.     

Hydrogen adsorption on GaAs(0 0 1)-c(4 × 4)

Exposure of the As-terminated GaAs(0 0 1)-c(4 × 4) reconstructed surface to atomic hydrogen (H) at different substrate temperatures (50-480 °C) has been studied by reflection high-energy electron diffraction (RHEED) and scanning tunnelling microscopy (STM). Hydrogen exposure at low temperatures (∼50 °C) produces a disordered (1 × 1) surface covered with AsH_x clusters. At higher temperatures (150-400 °C) exposure to hydrogen leads to the formation of mixed c(2 × 2) and c(4 × 2) surface domains with H adsorbed on surface Ga atoms that are exposed due to the H induced loss of As from the surface. At the highest temperature (480 °C) a disordered (2 × 4) reconstruction is formed due to thermal desorption of As from the surface. The results are consistent with the loss of As from the surface, either through direct thermal desorption or as a result of the desorption of volatile compounds which form after reaction with H.     

Si nucleation on Si(1 1 1)-7 × 7: From cluster pairs to 2D islands

Nucleation of 2D islands in Si/Si(1 1 1)-7 × 7 molecular beam epitaxy is studied using scanning tunneling microscopy (STM). A detailed analysis of the population of small amorphous clusters coexisting on the surface with epitaxial 2D islands has been performed. It is shown that small clusters tend to form pairs. The pairs serve as precursors for 2D islands as confirmed by direct STM observations of the smallest 2D islands covering two adjacent half-unit cells of the 7 × 7 reconstruction. It is proved with scaling arguments that the critical nucleus for 2D island formation consists not only of the pair itself, but also includes additional adatoms not belonging to the stable clusters.     

Structural properties of Bi-terminated GaAs(0 0 1) surface

Electronic and structural properties of Bi-terminated reconstructions on GaAs(0 0 1) surface have been studied by scanning tunneling microscopy (STM) and synchrotron radiation core-level spectroscopy. A 2-3 monolayer thick Bi-layer was evaporated on a Ga-terminated GaAs(0 0 1) surface. By heating the surface, the reconstruction changed from (2 × 1) to (2 × 4). The α2 phase with one top Bi dimer and one As or Bi dimer in the third atomic layer per surface unit cell is proposed to explain the STM images of the Bi/GaAs(0 0 1)(2 × 4) surface heated at 400 °C. Bi 5d photoemission from the Bi/GaAs(2 × 4) consisted of two components suggesting two different bonding sites for Bi atoms on the (2 × 4) surface. The variation of the surface sensitivity of the photoemission induced no changes in the intensities of the components indicating that the origins of both components lie in the first surface layer.     

Growth of In nanocrystallite arrays on the Si(1 0 0)-c(4 × 12)-Al surface

Using scanning tunneling microscopy, growth of In nanoisland arrays on the Si(1 0 0)-c(4 × 12)-Al surface has been studied for In coverage up to 1.1 ML and substrate temperature from room temperature to 150 °C. In comparison to the case of In deposition onto the clean Si(1 0 0) surface or Si(1 0 0)4 × 3-In reconstruction, the In growth mode is changed by the c(4 × 12)-Al reconstruction from the 2D growth to 3D growth, thus displaying a vivid example of the Volmer-Weber growth mode. Possible crystal structure of the grown In nanoislands is discussed.     

Stoichiometry, contamination and microstructure of MnSb(0 0 0 1) surfaces

The stoichiometry, microstructure and surface composition of MnSb have been investigated using X-ray photoelectron spectroscopy, electron diffraction and microscopy. Epitaxially grown samples were exposed to ambient air for several weeks and methods for preparing clean, stoichiometric and smooth surfaces were investigated. Air-stored sample surfaces are chemically stratified but dominated by Mn oxides 4-5 nm thick. These oxides are difficult to remove by ion bombardment and annealing (IBA), but a brief etch in HCl removes them very efficiently. It leaves the surface Sb-rich, and clean, smooth and stoichiometric surfaces are then readily recovered by IBA. These surfaces exhibit a (2 × 2) surface reconstruction with atomically flat terraces. This reconstruction can be reversibly changed to a (1 × 1) by Sb deposition and annealing.     

SrTiO3(0 0 1) reconstructions: the (2 × 2) to c(4 × 4) transition

Scanning tunneling microscopy (STM) is used to investigate the (0 0 1) surface structure of Nb doped SrTiO₃ single crystals annealed in ultra high vacuum (UHV). Atomically resolved images of the (2 × 2) reconstructed surface are obtained after annealing a chemically etched sample. With further annealing dotted row domains appear, which coexist with the (2 × 2) reconstruction. The expansion of these domains with further annealing gives rise to the formation of a TiO₂ enriched c(4 × 4) reconstruction.     

Effects of electronic confinement and substrate on the low-temperature growth of Pb islands on Si(1 0 0)-2 × 1 surfaces

The growth of Pb films on the Si(1 0 0)-2 × 1 surface has been investigated at low temperature using scanning tunneling microscopy. Although the orientation of the substrate is (1 0 0), flat-top Pb islands with (1 1 1) surface can be observed. The island thickness is confined within four to nine atomic layers at low coverage. Among these islands, those with a thickness of six layers are most abundant. Quantum-well states in Pb(1 1 1) islands of different thickness are acquired by scanning tunneling spectroscopy. They are found to be identical to those taken on the Pb(1 1 1) islands grown on the Si(1 1 1)7 × 7 surface. Besides Pb(1 1 1) islands, two additional types of Pb islands are formed: rectangular flat-top Pb(1 0 0) islands and rectangular three-dimensional (3D) Pb islands, and both their orientations rotate by 90° from a terrace to the adjacent one. This phenomenon implies that the structures of Pb(1 0 0) and 3D islands are influenced by the Si(1 0 0)-2 × 1 substrate.     

Study of arsenic for antimony exchange at the Sb-stabilized GaSb(0 0 1) surface

In this paper we present a first-principle study on the energetics of a single As₂ molecule on GaSb(0 0 1) reconstructed surface. In order to shed light into the mechanisms of anion exchange at the Sb-rich GaSb(0 0 1) surface, we studied firstly As₂ adsorption and then As for Sb exchange. We identify a surface region where both the processes are energetically favored. The results of this twofold analysis can be combined to derive possible reaction paths for the anion exchange process.     

Ab initio study of atomic geometry and electronic states of GaSb(0 0 1) reconstructions

We have employed the pseudopotential method and the density functional scheme to study the atomic geometry and electronic states of the GaSb(0 0 1) surface such as (1 × 3), c(2 × 6) and (4 × 3) reconstructions. It is found that both of (1 × 3) and c(2 × 6) reconstructions are characterised by metallic band structures, and thus violate the so-called electron counting rule, one of the main building principles of the stability of compound semiconductor surfaces. We establish that the stability of these reconstructions results from significant elastic deformation in the top atomic layers of the surface, a process which overcomes the penality incurred by the violation of the electron counting rule. The atomic geometry and electronic states for the two reconstructions are compared and contrasted with each other. The α and β phases of the (4 × 3) reconstruction also show large atomic relaxations but are semiconducting and obey the electron counting rule.     

Structure and stability of Sb/Au(1 1 0)-c(2 × 2) surface phase

Adsorption of 0.5 monolayers (ML) of Sb on the Au(1 1 0) surface resulted in the formation of a c(2 × 2) surface reconstruction. Analysis of surface X-ray diffraction data by a direct method revealed the existence of an ordered substitutional surface alloy, with every other hollow site occupied by Au and Sb atoms. Quantitative conventional χ² refinement showed a contraction of 0.12 ± 0.03 Å in the spacing of the first Au layer to the second, an expansion of 0.13 ± 0.03 Å in the second-to-third layer distance, and an inward Sb displacement (rumpling) of 0.21 ± 0.04 Å. This surface phase proved to be extremely robust, with the long-range order of this arrangement remaining up to substrate temperatures of 900 K.     

Atomic geometry and electronic properties of the Ge(1 1 1)2 × 1-Sb surface studied by scanning tunneling microscopy/spectroscopy and core-level photoemission

By scanning tunneling microscopy and spectroscopy (STM/S) and high-resolution core-level photoemission using synchrotron radiation, we have investigated the atomic structure and electronic properties of Sb-induced 2 × 1 reconstruction on Ge(1 1 1). Our results support well the zigzag-chain model proposed for this phase in the literature; in particular, the STM images visualize the Sb zigzag (Seiwatz) chain in a real space, and the STS I-V spectrum suggests this surface to be semiconducting, in good agreement with the atomic configuration proposed. However, a closer inspection of the STM results does not support the buckling of Sb chains reported in earlier studies. Moreover, the analysis of the Sb 4d core-level line shape of the (2 × 1) reconstruction shows that the bonding state of the Sb atoms is very similar, suggesting an unbuckled Seiwatz chain. In addition, the Ge 3d core-level emission reveals only one component, giving evidence for the ideal bulk-terminated structure of the Ge substrate.     

Observation of a (√3 × √3)-R30° reconstruction on GaN(0 0 0 1) by RHEED and LEED

A new reconstruction of √3 × √3-R30° has been observed on a GaN film grown on a 6H-SiC (0 0 0 1)-√3 × √3 surface using RHEED and LEED experimental techniques. The experimental LEED PF shows that the GaN film is Ga-terminated hexagonal. The surface is a mixture of two structures with a single bilayer height difference between them. One is a √3 × √3-R30° reconstruction with Ga-adatoms occupying the T4 sites. Another is a Ga-terminated 1 × 1 with no extra Ga on top. The area ratio of the √3 × √3 part to the 1 × 1 part is slightly larger than 1. The first principle total energy calculations and Tensor-LEED I-V curves simulations further confirm this structure model.     

Irreversible structural transformation of Si(1 1 4)-2 × 1 induced by subsurface carbon

Using scanning tunneling microscopy (STM), it has been found that the reconstruction of Si(1 1 4) is transformed irreversibly from a 2 × 1 structure composed of dimer (D), rebonded atom (R), and tetramer (T) rows (phase A) to a different kind of 2 × 1 structure composed of D, T, and T rows (phase B) by C incorporation. It has been confirmed by high-resolution synchrotron core-level photoemission spectroscopy (PES) that such an irreversible structural transformation is due to stable subsurface C atoms. They induce anisotropic compressive stress on the surface, which results in insertion of Si dimers to an R row to form a T row.     

Ga-induced superstructures on the Si(1 1 1) 7 × 7 surface

Monolayer Ga adsorption on Si surfaces has been studied with the aim of forming p-delta doped nanostructures. Ga surface phases on Si can be nitrided by N₂⁺ ion bombardment to form GaN nanostructures with exotic electron confinement properties for novel optoelectronic devices. In this study, we report the adsorption of Ga in the submonolayer regime on 7 × 7 reconstructed Si(1 1 1) surface at room temperature, under controlled ultrahigh vacuum conditions. We use in-situ Auger electron spectroscopy, electron energy loss spectroscopy and low energy electron diffraction to monitor the growth and determine the properties. We observe that Ga grows in the Stranski-Krastanov growth mode, where islands begin to form on two flat monolayers. The variation in the dangling bond density is observed during the interface evolution by monitoring the Si (LVV) line shape. The Ga adsorbed system is subjected to thermal annealing and the residual thermal desorption studied. The difference in the adsorption kinetics and desorption dynamics on the surface morphology is explained in terms of strain relaxation routes and bonding configurations. Due to the presence of an energetic hierarchy of residence sites of adatoms, site we also plot a 2D phase diagram consisting of several surface phases. Our EELS results show that the electronic properties of the surface phases are unique to their respective structural arrangement.     

The surface structure of BaO on Pt(1 1 1): (2 × 2)-reconstructed BaO(1 1 1)

The surface structure of BaO(1 1 1) has been determined using STM and computer modelling. The BaO(1 1 1) surface was prepared in thin film form on Pt(1 1 1) and presents a surface with twice the lattice parameter expected for that of the bulk termination, i.e. a (2 × 2) reconstruction. Computer modelling indicates that the bulk termination is unstable, but that the (2 × 2) reconstructed BaO(1 1 1) surface has a low surface energy and is hence a stable surface reconstruction. The (2 × 2) reconstruction consists of small, three-sided pyramids with (1 0 0) oriented sides and either oxygen or barium ions at the apices. Less regular surface reconstructions containing the same pyramids are almost equally stable, indicating that we may also expect less regular regions to appear with a fairly random distribution of these surface species. The simulations further suggest that a regular (4 × 4) reconstruction built up of bigger pyramids is even more energetically favourable, and some evidence is found for such a structure in the STM.     

Atomic structure of the carbon induced Si(0 0 1)-c(4 × 4) surface

The atomic and electronic structures of the Si(0 0 1)-c(4 × 4) surface have been studied by scanning tunneling microscopy (STM) and density functional theory (DFT). To explain the experimental bias dependent STM observations, a modified mixed ad-dimer reconstruction model is introduced. The model involves three tilted Si dimers and a carbon atom incorporated into the third subsurface layer per c(4 × 4) unit cell. The calculated STM images show a close resemblance to the experimental ones.     

Growth of Ce on Rh(1 1 1)

We have studied the growth of cerium films on Rh(1 1 1) using STM (scanning tunneling microscopy), LEED (low energy electron diffraction), XPS (X-ray photoelectron spectroscopy) and AES (Auger electron spectroscopy). Measurements of the Ce films after room temperature deposition showed that Ce is initially forming nanoclusters in the low coverage regime. These clusters consist of 12 Ce atoms and have the shape of pinwheels. At a coverage of 0.25 ML (monolayer, ML) an adatom layer with a (2 × 2) superstructure is observed. Above 0.4 ML, Rh is diffusing through pinholes into the film, forming an unstructured mixed layer. Annealing at 250 °C leads to the formation of ordered Ce-Rh compounds based on the bulk compound CeRh₃. At a coverage of 0.1 ML, small ordered (2 × 2) surface alloy domains are observed. The exchanged Rh atoms form additional alloy islands situated on the pure Rh(1 1 1) surface, showing the same (2 × 2) superstructure as the surface alloy. At a coverage of 0.25 ML, the surface is completely covered by the surface alloy and alloy islands. The (2 × 2) structure is equivalent to a (1 1 1)-plane of CeRh₃, contracted by 6%. Annealing a 1 ML thick Ce layer leads to a flat surface consisting of different rotational domains of CeRh₃(1 0 0). The Rh needed for alloy formation comes from 50 Å deep pits in the substrate. Finally we show that LEIS (low energy ion scattering) is not suitable for the characterization of Ce and CeRh films due to strong effects of neutralization.     

Anomalous hybridization in the In-rich InAs(0 0 1) reconstruction

The surface bonding arrangement in nearly all the confirmed reconstructions of InAs(0 0 1) and GaAs(0 0 1) have only two types of hybridization present. Either the bonds are similar to those in the bulk and the surface atoms are sp³ hybridized or the surface atoms are in a tricoordinated bonding arrangement and are sp² hybridized. However, dicoordinated In atoms with sp hybridization are observed on the InAs(0 0 1), In-rich, room temperature and low temperature surfaces. Scanning tunneling microscopy (STM) images of the room temperature (300 K) InAs(0 0 1) surface reveal that the In-rich surface reconstruction consists of single-atom rows with areas of high electron density that are separated by ∼4.3 Å. The separation in electron density is consistent with rows of undimerized, sp hybridized, In atoms, denoted as the β3′(4 × 2) reconstruction. As the sample is cooled to 77 K, the reconstruction spontaneously changes. STM images of the low temperature surface reveal that the areas of high electron density are no longer separated by ∼4.3 Å but instead by ∼17 Å. In addition, the LEED pattern changes from a (4 × 2) pattern to a (4 × 4) pattern at 77 K. The 77 K reconstruction is consistent with two (4 × 2) subunit cells; one that contains In dimers on the row and another subunit cell that contains undimerized, sp hybridized, In atoms on the row. This combination of dimerized and undimerized subunit cells results in a new unit cell with (4 × 4) periodicity, denoted as the β3(4 × 4) reconstruction. Density functional theory (DFT) and STM simulations were used to confirm the experimental findings.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.