An efficient synthesis of unsymmetrical diarylmethanes from the dehydration of arenes with benzyl alcohols using InCl3·4H2O/acetylacetone catalyst system

An efficient and practical synthesis of unsymmetrical diarylmethanes has been achieved from the dehydration of arenes with benzyl alcohols in the presence of catalytic amount of InCl₃·4H₂O/acetylacetone.     

An eco-friendly synthesis of 2-aminochromenes and indolyl chromenes catalyzed by InCl3 in aqueous media

A simple and convenient method for the synthesis of new 2-aminochromenes and indolyl chromenes via an indium trichloride catalyzed, three-component reaction in aqueous media is described.     

Glycerin and CeCl3·7H2O: a new and efficient recyclable medium for the synthesis of bis(indolyl)methanes

Glycerin and CeCl₃·7H₂O were successfully used in recyclable catalytic system for the synthesis of several bis(indolyl)methanes in good to excellent yields through the reaction of indoles with aldehydes. The method is applicable to aliphatic and aromatic aldehydes, and the mixture of glycerin and CeCl₃·7H₂O can be reused up to five times without special treatment and with comparable yields.     

Modular CeCl3·7H2O-catalyzed multi-component synthesis of 1,2,3,4-tetrasubstituted pyrroles under microwave irradiation and their further trichloroisocyanuric acid-mediated conversion into 5-sulfenylpyrrole derivatives

A modular, multicomponent synthesis of 1,2,3,4-tetrasubstituted pyrroles promoted by the inexpensive CeCl₃·7H₂O, is reported. The reaction was carried out under microwave irradiation, affording good yields of products in short time. Scope and limitations were explored and a plausible reaction mechanism is discussed. The resulting heterocycles were smoothly and efficiently converted into their corresponding 5-arylsulfenyl derivatives by reaction with diaryl disulfides and trichloroisocyanuric acid in EtOAc.     

FeCl3: an efficient catalyst for reactions of electron-rich arenes with imines or aziridines

Iron(III) chloride was discovered highly effective as catalyst in the Friedel-Crafts reactions of electron-rich arenes with imines or aziridines. It was found that reactions of imines were highly substrate-dependent, which generated mono- or double-addition products, while arenes reacted with aziridines regioselectively leading to the formation of desired ring-opening products in 2 min with moderate to good yields.     

Selective reductive cleavage of 2,3-epoxybromides by the InCl3-NaBH4 reagent system

A combination of sodium borohydride and a catalytic amount of indium(III) chloride in acetonitrile reduces 2,3-epoxybromides to the corresponding allylic alcohols in good yields involving reduction of the bromo moiety followed by selective C-O bond cleavage through a radical process. Several aromatic, cyclic and open-chain bromoepoxides successfully participated in this reaction.     

InCl3-CH3CN-H2O: an efficient catalyst-solvent combination for the synthesis of Perlin aldehydes and related compounds. Application in the synthesis of unnatural l-azasugars

InCl₃-CH₃CN-H₂O has been found to be an efficient catalyst-solvent combination for the synthesis of Perlin aldehydes and related compounds. While acetylated glycals afforded the Perlin aldehydes directly with InCl₃ and water, benzylated glycals on the other hand provided the hemiacetals under identical condition. The methodology reports a non-mercurial approach to Perlin aldehydes. Noteworthy is that this reaction is more facile as well as highly selective with glycals possessing a hydroxyl as a leaving group than with a benzyloxy group. Extension of this reaction to 2-C-hydroxymethyl glycals resulted in the formation of the corresponding hemiacetals, which were further transformed in to unsaturated azasugars with an exo-methylene group at C-2 position. Glycosidase inhibition studies reveal that these compounds display selectivity in inhibiting glucosidases rather than galactosidases.     

Crystal structure and thermal study of the new hydrated cadmium-cerium(III) chloride CeCd4Cl11·13H2O

The new double-salt CeCd₄Cl₁₁·13H₂O in the ternary system CeCl₃-CdCl₂-H₂O has been prepared from aqueous solution upon evaporation at 5°C and characterized based on elemental analysis, spectroscopic data, thermal studies and X-ray powder and single-crystal diffraction. CeCd₄Cl₁₁·13H₂O crystallizes in the monoclinic space group P2₁ with a=7.667(2), b=17.351(3), c=11.970(2)Å, β=101.61(3)° and Z=2. After refinement of the structure the reliability factor R in the final cycle is 0.064. The structure can be regarded as consisting of endless double chains of CdCl₆ and CdOCl₅ octahedra and isolated tricapped triangular prisms surrounding the cerium cations. Differential scanning calorimetry showed that the title compound exhibits five endothermic anomalies interpreted from thermogravimetry. A comparison with the structure of SrCd₂Cl₆·8H₂O is proposed.     

An efficient and one-pot synthesis of 2,4,5-trisubstituted and 1,2,4,5-tetrasubstituted imidazoles catalyzed by InCl3·3H2O

InCl₃·3H₂O was found to be a mild and effective catalyst for the efficient, one-pot, three component synthesis of 2,4,5-trisubstituted imidazoles at room temperature. Moreover, the utility of this protocol was further explored conveniently for the one-pot, four component synthesis of 1,2,4,5-tetrasubstituted imidazoles in high yields.     

InCl3-catalyzed reaction of aromatic amines with cyclic hemiacetals in water: facile synthesis 1,2,3,4-tetrahydroquinoline derivatives

By using a domino reaction of aromatic amines with various cyclic hemiacetals catalyzed by indium chloride in water, tetrahydroquinoline derivatives were synthesized efficiently.     

Thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O: II. Identification of the gaseous products

The main goal of the presented work was to verify the previously assumed decomposition stages of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O (HACOT) [Thermochim. Acta 354 (2000) 45] under different atmospheres (inert, oxidising and reducing). The gaseous products of the decomposition were qualitatively and quantitatively analysed by mass spectrometry (MS) and Fourier-transformed infrared spectroscopy (FT-IR). It was confirmed that the gaseous products of HACOT decomposition under studied atmospheres there were H₂O (stage I) and NH₃, CO₂ (stage II). The main gaseous products in the third stage in argon and hydrogen (20 vol.% H₂/Ar) were CO and CO₂, whereas in air (20 vol.% O₂/Ar) only CO₂ was identified. Under the oxidising as well as reducing atmospheres the influence of secondary reactions on the composition of both, solid and gaseous products was found particularly strong during the third stage of the process. The studies of the multistage decomposition of HACOT, additionally complicated by many secondary reactions, required application of the hyphenated TA-MS or TA-FT-IR techniques combined with the pulse thermal analysis PTA^® allowing quantification of the spectroscopic signals and investigation of gas-solid and gas-gas reactions in situ.     

InCl3-assisted one-pot synthesis of 1-aminocarbazoles

A novel InCl₃-mediated one-pot reaction leading to 1-aminocarbazoles is reported. Starting from easily available 2-acetyl-1H-indole, the reaction involves the alkylation of C-3 with a prop-2-yn-1-ol followed by a domino aminobenzannulation reaction in the presence of a secondary amine. The indium salt is most likely involved as catalyst in all three steps of the one-pot reaction. Starting from 2-acetyl-1H-indole and a series of prop-2-yn-1-ols and secondary amines a small library of products has been obtained.     

FeCl3·6H2O-promoted skeleton-rearrangement of 1-substituted-3-benzazepines: substrate extension and product utilization

FeCl₃·6H₂O-promoted skeleton-rearrangement of 1-substituted-3-benzazepines was further exploited. Both 1-aryl- and 1-alkyl- or 1-alkenyl-benzazepines underwent this reaction smoothly. The rearrangement products were used to prepare a series of novel derivatives containing both tetrahydroisoquinoline (THIQ) and tetrahydropyrimidin-4(1H)-one scaffolds through a Mannich-type process.     

Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.     

An efficient InCl3-catalyzed hydration of nitriles to amides: acetaldoxime as an effective water surrogate

An efficient InCl₃-catalyzed hydration protocol of nitriles to amides was developed. The reaction was carried out in toluene at refluxing temperature with the aid of acetaldoxime as an effective water surrogate to produce amides in high yields.     

Synthesis and characteristic of the Fe3O4@SiO2@Eu(DBM)3·2H2O/SiO2 luminomagnetic microspheres with core-shell structure

The core-shell structured luminomagnetic microsphere composed of a Fe₃O₄ magnetic core and a continuous SiO₂ nanoshell doped with Eu(DBM)₃·2H₂O fluorescent molecules was fabricated by a modified Stöber method combined with a layer-by-layer assembly technique. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), confocal microscopy, photoluminescence (PL), and superconducting quantum interface device (SQUID) were employed to characterize the Fe₃O₄@SiO₂@Eu(DBM)₃·2H₂O/SiO₂ microspheres. The experimental results show that the microshpere has a typical diameter of ca. 500 nm consisting of the magnetic core with about 340 nm in diameter and silica shell doped with europium complex with an average thickness of about 80 nm. It possesses magnetism with a saturation magnetization of 25.84 emu/g and negligible coercivity and remanence at room temperature and exhibits strong red emission peak originating from electric-dipole transition ⁵D₀ → ⁷F₂ (611 nm) of Eu³⁺ ions. The luminomagnetic microspheres can be uptaken by HeLa cells and there is no adverse cell reaction. These results suggest that the luminomagnetic microspheres with magnetic resonance response and fluorescence probe property may be useful in biomedical imaging and diagnostic applications.     

Aqueous C-S cross-coupling: synthesis of 2-iminobenzo-1,3-oxathioles via CuCl2·H2O-catalyzed tandem reaction of 2-iodophenols with isothiocyanates

A CuCl₂·H₂O-catalyzed tandem reaction of 2-iodophenol with isothiocyanate in water is described, which provides an environmentally benign, efficient, and practical route for the generation of 2-iminobenzo-1,3-oxathiole. It was noteworthy that most of the products were easily separated from the reaction system by simple filtration.     

An open-framework three-dimensional indium oxalate: [In(OH)(C2O4)(H2O)]3·H2O

By hydrothermal reaction of In₂O₃ with H₂C₂O₄·2H₂O in the presence of H₃BO₃ at 155 °C, an open-framework three-dimensional indium oxalate of formula [In(OH)(C₂O₄)(H₂O)]₃·H₂O (1) has been obtained. The compound crystallizes in the trigonal system, space group R3c with , , , Z=6, R₁=0.0352 at 298 K. The small pores in 1 are filled with water molecules. It loses its filled water at about 180 °C without the change of structure, then the bounded water at 260 °C, and completely decompounds at 324 °C. The residue is confirmed to be In₂O₃.     

Solid-liquid phase equilibria in the system water + methanol + MgSO4·7H2O + MnSO4·4H2O

The solubilities and complex phase equilibria for the system of MnSO₄·4H₂O + MgSO₄·7H₂O + H₂O + CH₃OH were determined at the temperatures 291.2 and 301.2 K over the methanol mole fraction range of 0.00–0.12.The solubility data were used for modelling with the modified extended electrolyte non-random two-liquid equation. The salting-out effect of MgSO₄ and methanol on the solubilities of two manganese salts (MnSO₄·H₂O and MnSO₄·4H₂O) are represented in the several thermodynamic figures as a function of temperature. The solventing-out effect was stronger than the salting-out effect, which results in a decrease of the solubilities of manganese, salts even though the solubility of MnSO₄·H₂O decreased and solubility of MgSO₄·4H₂O increased as temperature increased.     

The first example of the C-3 alkylation of indoles with cyclopropyl ketones promoted by CeCl3·7H2O/LiI

Indoles undergo smooth alkylation with cyclopropyl ketones in the presence of the CeCl₃·7H₂O/LiI reagent system in refluxing acetonitrile under neutral conditions to produce the corresponding C-3 substituted indole derivatives in good to high yields and with high selectivity. The use of CeCl₃·7H₂O/LiI makes this method simple, convenient, and cost-effective.