Carbon dendron nano-chains with π-extended conjugation based on end-capped N,N-dimethylamino in linear 1,4-phenylethynyl or in 1,5-naphthylethynyl subunits: fluorescence analysis

The synthesis of dendrons with the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl unit connected to conjugated naphthylethynyl or p-phenylethynyl chains, as the branches of the 1,3,5-substituted benzene core, have been undertaken by heterocoupling reaction between 1,3,5-triiodobenzene and the convenient end-capped 5-(N,N-dimethylamino)naphthylacetylene or 5-(N,N-dimethylamino)naphthylethynylphenylacetylene in the presence of the palladium-copper catalyst system, in excellent yields. The influence of the alternating naphthylethynyl-phenylethynyl chains on the fluorescence emission radiation, in the dendron structures, has been analyzed.     

Synthesis of carbon dendron nano-chains with π-extended conjugation based on linear 1,4-phenylethynyl and 1,5-naphthylethynyl subunits

A convenient and efficient synthesis of 3,5-di(trimethylsilylethynyl)phenylacetylene and p-[3,5-di(trimethylsilylethynyl)-1-phenylethynyl]phenylacetylene and the naphthylethynyl homologues terminal acetylenes of 5-(N,N-dimethylamino)naphthylethyne have been carried out. These terminal acetylene compounds serve to prepare nanometer-sized conjugated 1,3,5-tri(ethynylphenyl)benzene and 1,3,5-tri(ethynylnaphthyl)benzene oligomers, by means of heterocoupling with 1,3,5-triiodobenzene, catalysed by palladium, in excellent yields. Both the ethynylphenyl or ethynylnaphthyl homologues chains show fluorescence emission radiation, with important quantum yield.     

Degradation and cis-to-trans isomerization of poly[(2,4-difluorophenyl)acetylene]s of various initial molecular weight: SEC,NMR, DLS and EPR study

Molecular weight (MW) and configurational stabilities of a series of high-cis poly[(2,4-difluorophenyl)acetylene]s (PdFPhA, M_w from 2.2 × 10⁴ to 9.7 × 10⁵) exposed to the atmosphere and diffuse daylight are reported. Polymers dissolved in THF-d₈ undergo simultaneous cis-to-trans isomerization and degradation under formation of a bimodal MW distribution. Degradation and isomerization rates are tightly connected and decrease with decreasing MW of the parent PdFPhAs. This finding may be interesting for the functional applications of substituted polyacetylenes. The partly aged PdFPhAs contain two separable fractions: higher-MW high-cis macromolecules containing a low amount of unpaired electrons and lower-MW deeply isomerized cis/trans macromolecules enriched in the unpaired electrons content. The difference in MW of these fractions reflects the various degradation rates of isomerized and high-cis macromolecules. Only a slow degradation without changes in the configurational structure proceeds if PdFPhA is allowed to age in the solid state. The suppression of the cis-to-trans isomerization reflects the suppression of motion of the polymer chains segments in the solid state.     

Benzylic-acetoxylation of alkylbenzenes with PhI(OAc)2 in the presence of catalytic amounts of TsNH2 and I2

Treatment of alkylbenzenes with (diacetoxyiodo)benzene in the presence of catalytic amounts of p-toluenesulfonamide or p-nitrobenzenesulfonamide, and molecular iodine in 1,2-dichloroethane at 60 °C gave the corresponding (α-acetoxy)alkylbenzenes in good to moderate yields. The present reaction is a simple method for the introduction of an acetoxy group to the benzylic position of alkylbenzenes.     

Conformational behavior of dithia[n.3.3](1,3,5)cyclophanes and dithia[n.3.3](1,2,6)cyclophanes

The conformational behavior of a series of crown-fused dithia[n.3.3](1,2,6)cyclophanes (126-CPs) and dithia[n.3.3](1,3,5)cyclophanes (135-CPs) was investigated by variable-temperature ¹H and ¹³C NMR spectroscopy, X-ray crystallography and density functional theory (DFT) calculations. Single crystal X-ray structure analysis showed that two thia-bridges in 126-CPs adopted a pseudochair-pseudochair (cc) conformation and the cyclophane decks underwent a ring-tilting motion in the case of [10.3.3](1,2,6)cyclophane (1a). In contrast, the thia-bridges in 135-CPs took both cc and pseudoboat-pseudochair (bc) conformations, and the ring-tilting process was also found in [10.3.3](1,3,5)cyclophane (2a). Variable temperature ¹H NMR study revealed that there was no wobbling-motion for two thia-bridges in 126-CPs while thia-bridges in 135-CPs experienced a wobbling-process with a conformational barrier of 9.21 and 8.80 kcal mol⁻¹, respectively, for 2a and [13.3.3](1,3,5)cyclophane (2b). DFT calculations for the two cyclophanes series revealed that 126-CPs preferred a cc conformation which was consistent with the experimental observation; similarly, 135-CPs took a preferential cc conformation, agreeing with 2a having a predominant cc conformer (cc:bc ratio=70:30), but not 2b having a predominant bc conformer (cc:bc ratio=15:85) in the solid state.     

A new method for the synthesis of N-substituted 1,3,5-dithiazinanes via the catalytic recyclization of 1,3,5-trithiane with aryl(benzyl) hydrazines and aryl amines

An efficient method for the synthesis of N-substituted 1,3,5-dithiazinanes based on the amination reaction of 1,3,5-trithiane with aryl(benzyl) hydrazines and N-aryl amines in the presence of Ti and Fe catalysts has been developed.     

Synthesis of enantiopure (S)-7-hydroxy-3-amino-3,4-dihydro-2H-1-benzopyran en route to (+)-scyphostatin

(S)-7-Hydroxy-3-amino-3,4-dihydro-2H-1-benzopyran, a key synthetic intermediate towards the total synthesis of (+)-scyphostatin, has been prepared in >98% ee. Key synthetic steps were (i) the oxidative dearomatization of an l-tyrosine derived phenol, (ii) the transformation of the resulting p-quinol acetate to the corresponding resorcinol upon exposure to Thiele reaction conditions and, (iii) the direct formation of the benzopyran ring upon treatment of an N-Boc protected 4-(2-acetoxybenzyl)oxazolidin-2-one with sodium methoxide.     

Synthesis and optical properties of conjugated N,N-dimethyl and thienyl end-capped 2,5-(arylethynyl)thiophene oligomer structures

End-capped (N,N-dimethylaminophenyl) and 2′-thienylethynyl 2,5-thiophene oligomer structures were synthesized by heterocoupling between the terminal acetylenes such as: p-(N,N-dimethylaminophenyl)ethyne (3) [or 1-(p-(N,N-dimethylaminophenyl)-2-p-(ethynylphenyl)ethyne, 4]; p-(β-ethenyl-2′-thienyl)phenylethyne (E-9) [or p-(β-ethynyl-2′-thienyl)phenylethyne, 11], and 2,5-diiodothiophene, catalyzed by the Cl₂Pd(PPh₃)₂/CuI system, in good to excellent yields. The 2,5-di[(3′,5′-di(trimethylsilylethynyl)phenyl]_x-1-ethynyl]thiophene oligomers were prepared by heterocoupling between 3′,5′-di[(trimethylsilylethynyl)phenyl]_x-1-ethyne (n = 0-2) terminal acetylenes and 2,5-diiodothiophene, in excellent yields. The terminal acetylenes were efficiently prepared by a specific protection-deprotection methodology. All the ethynylphenyl compounds obtained show fluorescence radiation emission, with a bathochromic shift of the wavelength that increases with the chain conjugation.     

Chemoselective oxidation and deprotection of para-methoxybenzylic position with (diacetoxyiodo)benzene in acetic-trifluoroacetic acid

(Diacetoxyiodo)benzene in the presence of acetic–trifluoroacetic acid in THF has been developed for the chemoselective para-methoxybenzylic CH bond oxidation to provide aryl carbonyl compounds at room temperature. The reaction condition is also applicable for the chemoselective deprotection of para-methoxybenzyl (PMB) ether in the presence of benzyl ether.     

Reaction of (diacetoxyiodo)benzene with excess of trifluoromethanesulfonic acid. A convenient route to para-phenylene type hypervalent iodine oligomers

Reaction of (diacetoxyiodo)benzene [PhI(OAc)₂] in trifluoromethanesulfonic acid (TfOH) resulted in oligomerization of PhI(OAc)₂. Quenching with NaBr gave the bromide salts of hypervalent iodine oligomers that were determined by thermolysis with KI to be a para phenylene type of oligomers. Neutralization of the reaction mixture of PhI(OAc)₂ and TfOH with aqueous NaHCO₃ yielded the triflate salts of iodine oligomers. Furthermore, quenching the reaction mixture with aromatic substrates afforded arylated iodine oligomers. These iodine oligomers were found to be 3-4 of the number average degree of polymerization (P_n) by GC analysis of the thermolysis products and ¹H NMR analysis. The major products, trimer and tetramer, were synthesized independently.     

Novel generation of selenoaldehydes through stannic chloride-induced unsymmetrical C-Se bond cleavage of bis(N,N-dimethylcarbamoylseleno)methanes

Treatment of a benzene or a CH₂Cl₂ solution of bis(N,N-dimethylcarbamoylseleno)methanes with SnCl₄ afforded β-1,3,5-triselenanes, and the key intermediates, acylselonium ions and selenoaldehydes, were successfully trapped by using allyltrimethylsilane or 2,3-dimethyl-1,3-butadiene to obtain the allylation products or the cycloadducts, respectively.     

The CA.M lattice revisited. Gel formation from a linear bis-isocyanuric acid and 2-amino-4,6-bis-(4-tert-butylphenylamino)-1,3,5-triazine

Five bis(isocyanuric) acid dimers have been prepared and characterised. The introduction of flexible alkyl chains was necessary to aid solubility. On mixing with N,N-bis(4-tert-butyphenyl)melamine in THF followed by slow evaporation, a viscous gel can form which is interpreted as evidence for the assembly of an infinite 2-D hydrogen bonded network.     

Oxidative entry to α-oxy N-acyl aminals and hemiaminals: efficient formation of 2-(N-acylaminal) substituted tetrahydropyrans

An efficient new method to synthesize α-oxy N-acyl aminals and hemiaminals in a single step from readily synthesized N-acyl enamines has been developed using PhI(OAc)₂ as the oxidant. The reaction conditions are very mild and the products are obtained in good yields (65-92%). A possible mechanistic pathway is laid out.     

A novel combination of (diacetoxyiodo)benzene and tert-butylhydroperoxide for the facile oxidative dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones

A clean and efficient oxidative dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones to 1,2-dihydropyrimidines has been achieved through a novel combination of (diacetoxyiodo)benzene and tert-butylhydroperoxide in CH₂Cl₂.     

Anionic σ-complexes of 1,3,5-tris(fluorosulfonyl)benzene

We have found that symmetrical benzene trisulfonic-acid trifluoride 1 is able to undergo nucleophilic addition at free positions on the aromatic ring. Its reactions with sodium sulfite, morpholine and carbanions of malonic and acetoacetic esters, dimedone and nitromethane lead to the formation of comparatively stable anionic σ-complexes 3-8.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Cadmium(II) three‐dimensional coordination polymers constructed from 1,3,5‐tris(4‐carboxyphenoxy)benzene: synthesis,crystal structure,fluorescence and I2 sorption characterization

Two three‐dimensional (3D) Cd^II coordination polymers, namely poly[[di‐μ‐aqua‐diaquabis{μ₅‐4,4′,4′′‐[benzene‐1,3,5‐triyltris(oxy)]tribenzoato}tricadmium(II)] dihydrate], {[Cd₃(C₂₇H₁₅O₉)₂(H₂O)₄]·2H₂O}_n, (I), and poly[[aqua{μ₆‐4,4′,4′′‐[benzene‐1,3,5‐triyltris(oxy)]tribenzoato}(μ‐formato)[μ‐1,1′‐(1,4‐phenylene)bis(1H‐imidazole)]dicadmium(II)] dihydrate], {[Cd₂(C₂₇H₁₅O₉)(C₁₂H₁₀N₄)(HCOO)(H₂O)]·2H₂O}_n, (II), have been hydrothermally synthesized from the reaction system containing Cd(NO₃)₂·4H₂O and the flexible tripodal ligand 1,3,5‐tris(4‐carboxyphenoxy)benzene (H₃tcpb) via tuning of the auxiliary ligand. Both complexes have been characterized by single‐crystal X‐ray diffraction analysis, elemental analysis, IR spectra, powder X‐ray diffraction and thermogravimetric analysis. Complex (I) is a 3D framework constructed from trinuclear structural units and tcpb^3? ligands in a μ₅‐coordination mode. The central Cd^II atom of the trinuclear unit is located on a crystallographic inversion centre and adopts an octahedral geometry. The metal atoms are bridged by four syn–syn carboxylate groups and two μ₂‐water molecules to form trinuclear [Cd₃(COO)₄(μ₂‐H₂O)₂] secondary building units (SBUs). These SBUs are incorporated into clusters by bridging carboxylate groups to produce pillars along the c axis. The one‐dimensional inorganic pillars are connected by tcpb^3? linkers in a μ₅‐coordination mode, thus forming a 3D network; its topology corresponds to the point symbol (4².6².8²)(4⁴.6²)₂(4⁵.6⁶.8⁴)₂. In contrast to (I), complex (II) is characterized by a 3D framework based on dinuclear cadmium SBUs, i.e. [Cd₂(COO)₃]. The two symmetry‐independent Cd^II ions display different coordinated geometries, namely octahedral [CdN₂O₄] and monocapped octahedral [CdO₇]. The dinuclear SBUs are incorporated into clusters by bridging formate groups to produce pillars along the c axis. These pillars are further bridged either by tcpb^3? ligands into sheets or by 1,4‐bis(imidazol‐1‐yl)benzene ligands into undulating layers, and finally these two‐dimensional surfaces interweave, forming a 3D structure with the point symbol (4.6²)(4⁷.6¹⁴). Compound (II) exhibits reversible I₂ uptake of 56.8 mg g^?1 with apparent changes in the visible colour and the UV–Vis and fluorescence spectra, and therefore may be regarded as a potential reagent for the capture and release of I₂.     

Synthesis of star polystyrene by radical polymerization with 1,2,4,5-tetrakis(p-tert-butylphenyl selenomethyl)benzene as a novel photoiniferter

1,2,4,5-Tetrakis(p-tert-butylphenylselenomethyl)benzene was synthesized and used as a tetrafunctional photoiniferter for the polymerization of styrene. Both the yield and the number average molecular weight () of polymers increased with reaction time and linearly increased with yield of polymer. The polymerization of styrene using this novel photoiniferter permitted formation of star-shaped polystyrene containing arylseleno groups at the chain ends, and the average degree of functionality was 3.2. Photopolymerization of styrene with end-functional star polystyrene as polymeric photoiniferter afforded polystyrene having high molecular weight.     

Synthesis of liquid crystalline materials based on 1,3,5-triphenylbenzene and 2,4,6-triphenyl-1,3,5-s-triazine

C₃-symmetric alkyloxy/aryloxy polyether dendrimers have been synthesized from 1,3,5-triphenylbenzene and 2,4,6-triphenyl-1,3,5-s-triazine and their liquid crystalline properties have been studied. C₃-symmetric derivatives with n-hexyl and n-dodecyl chains at the periphery show mesophase properties when they are complexed with trinitrofluorenone at different temperatures.     

Reactions of 1,3,5-tris(fluorosulfonyl)benzene with some nucleophilic reagents

The reactions of 1,3,5-tris(fluorosulfonyl)benzene 1 with nucleophilic agents were investigated. It was found that morpholine, β,β,β-trifluoroethanol in the presence of triethylamine and sodium azide formed corresponding 1,3,5-trisulfonyl derivatives. In contrast, nucleophiles such as aniline, thiourea, and potassium thiocyanate do not react with compound 1 even in excess and under moderate heating. The conditions for the selective fluorine atom substitution in one SO₂F group with morpholine, DMAP and aniline in the presence of triethylamine as well as in two SO₂F groups with DMAP were found. Anionic σ-complex of compound 1 with nitromethane was isolated as individual compound.