A one-pot synthetic approach to the functionalized isomeric ellipticine derivatives through an imino Diels-Alder reaction

An efficient, three component, one-pot synthesis of new isomeric ellipticine derivatives prepared through an imino Diels-Alder reaction of 3-aminocarbazoles and substituted benzaldehydes with electron-rich alkenes such as 3,4-dihydro-2H-pyran, 2,3- dihydrofuran and ethyl vinyl ether catalyzed by InCl₃ (10 mol %) in ionic liquid is reported. In the case of substituted benzaldehydes, reductive amination is observed.     

Development of effective Lewis acids for the catalytic Diels-Alder reaction of α,β-unsaturated lactones with cyclopentadiene

We found that ‘Tf₂CH₂ + Me₃Al’ systems are effective catalytic systems for the DA reaction of less reactive α,β-unsaturated lactone derivatives, compared to α,β-unsaturated ester derivatives, with cyclopentadiene. Mononuclear aluminum methide complex, Tf₂CHAlMe₂, as an active species is formed in these catalytic systems. Effects of lactone ring-size on the reactivity and stereoselectivity were also examined. By expanding ring-size, reactivity of α,β-unsaturated lactones reduced but endo-selectivity notably increased.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Imino ene-type reaction of enamines with N-sulfonylimines and application to diastereoselective synthesis of N-sulfonyl-1,3-diamines

Enamines react rapidly with N-sulfonylimines to afford imino ene-type adducts. The reaction proceeds even at −78 °C in the presence of acetic acid and shows high diastereoselectivity. Acid hydrolysis of imino ene-type products affords β-amino ketones, and reduction with NaBH₃CN furnishes N-sulfonyl-1,3-diamines with high diastereoselectivities. The stereochemistry of these transformations is considered based on transition state models.     

Bis-phosphine monoxide platinum(II) and palladium(II) cationic complexes as Lewis acid catalysts in Diels-Alder and sulfoxidation reactions

A series of bis-phosphine monoxide (BPMO) palladium(II) and platinum(II) cationic complexes of the type [M(BPMO-κ²-P,O)₂][X]₂ (M = Pd, Pt; BPMO = Ph₂P-(CH₂)_n-P(O)Ph₂ with n = 1 (dppmO), 2 (dppeO), 3 (dpppO); X = BF₄, TfO) were prepared from the corresponding chlorides [MCl₂(BPMO-κ¹-P)₂] upon treatment with 2 equiv. of AgX in wet acetone/CH₂Cl₂ or MeOH solutions. They were characterized by ¹H and ³¹P{¹H} NMR spectroscopies and, in the case of the complex [Pt(dppeO-κ²-P,O)₂][BF₄]₂, also by X-ray crystallography. These complexes were tested as catalysts in some Diels-Alder and oxidation reactions with different substrates. In the latter reaction Pt(II) complexes showed moderate activity, while for the former one, both classes of complexes were active in the C-C coupling, in particular the Pt(II) species showed interesting high endo/exo diasteroselectivity depending on the counteranion.     

New data on the reaction of hexafluorothioacetone with styrenes

Hexafluorothioacetone, generated in situ from its cyclic dimer (1) in the presence of CsF catalyst was shown to react with styrene or 4-alkyl-styrenes (alkyl = c-hexyl, Me, t-Bu) forming the corresponding 2:1 Diels-Alder cycloadducts as major products. All cycloadducts were isolated, and the structure of two of them was established by single crystal X-ray diffraction. While 2-vinylnaphthalene, 4-CF₃- and 4-Cl-styrenes in the presence of CsF catalyst react with 1 producing the corresponding 1:1 Diels-Alder cycloadducts, 4-alkoxy styrenes were found to produce preferentially the corresponding thietanes. The reaction of styrenes with 1 was also found to be sensitive to the source of fluoride ion and the solvent.     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

Three-component imino Diels-Alder reaction with essential oil and seeds of anise: generation of new tetrahydroquinolines

A simple and efficient one-pot method for the synthesis of 4-anisyl-2-phenyl-1,2,3,4-tetrahydroquinoline derivatives using a three-component imino Diels-Alder cycloaddition (Povarov reaction) between anilines, benzaldehyde, and trans-anethole in the presence of acidic catalysts is shown. New substituted tetrahydroquinolines are reported and their direct preparation from the anise essential oil is described. Also, a simple procedure of the same tetrahydroquinolines from the anise seeds under supercritical fluid (CO₂) conditions has been reported.     

Synthesis of P-chiral phosphines via chiral metal template promoted asymmetric furan Diels-Alder reaction

The organoplatinum complex containing ortho-metalated (S)-(1-(dimethylamino)ethyl)-naphthalene as the chiral auxiliary has been used to promote the asymmetric [4+2] Diels-Alder reaction between phenyldivinylphosphine and 2-diphenylphosphinofuran. The reaction was complete in 6 days at room temperature, with the formation of four isomeric diphosphino-substituted oxanorbornene metal complexes in the ratio of 4:2:2:1. Only the exo-cycloaddition products were formed. The formation of stereogenic carbon centers within the oxanorbornene skeleton are highly stereoselective, with all four cycloadducts adopting the same absolute configurations. However, the stereocontrol at the external phosphorus stereogenic center is less efficient (S_p:R_p = 2:1 for the template cycloadducts). The chiral naphthylamine auxiliary could be removed chemoselectively by treatment with concentrated hydrochloric acid, and further ligand liberation of the dichloro complexes with aqueous cyanide gave the diphosphino-substituted oxanorbornene ligands. Hydrogenation of the double bonds in the cycloadduct stabilizes the phosphorus stereogenic center of the free diphosphine ligand which otherwise undergoes inversion of absolute configuration.     

PEG-400 as green reaction medium for Lewis acid-promoted cycloaddition reactions with isoeugenol and anethole

A simple and efficient one-pot method for the synthesis of new 2,4-diaryl-1,2,3,4-tetrahydroquinolines using a three-component imino Diels-Alder cycloaddition between trans-isoeugenol or trans-anethole, anilines, and benzaldehyde in the presence of BF₃·OEt₂ in PEG-400, a green and reusable solvent, has been developed. Also, BF₃·OEt₂-catalyzed formal [3+2] cycloaddition reaction of trans-isoeugenol or trans-anethole with 1,4-benzoquinone in PEG-400 to give dihydrobenzo[b]furan derivatives has been described.     

Synthesis, characterization and thermal degradation of oligo-2-[(4-fluorophenyl) imino methylene] phenol and some of its oligomer-metal complexes

In this study, the oxidative polycondensation reaction conditions of 2-[(4-fluorophenyl) imino methylene] phenol (FPIMP) with air oxygen and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Synthesized oligo-2-[(4-fluorophenyl) imino methylene] phenol was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. The yield of oligo-2-[(4-fluorophenyl) imino methylene] phenol (OFPIMP) was found to be 62.00% (for air O₂ oxidant) and 97.70% (for NaOCl oxidant) at the optimum reaction conditions. According to the SEC analysis, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of OFPIMP were found to be 1370 g mol⁻¹, 1979 g mol⁻¹ and 1.45, using NaOCl, 2105 g mol⁻¹, 2557 g mol⁻¹, and 1.22, using air O₂, respectively. During the oxidative polycondensation reaction, (2.88%) a part of -CHN group oxidized to carboxylic acid (-COOH). TG and TG-DTA analyses were shown to be more stable of oligo-2-[(4-fluorophenyl) imino methylene] phenol and its oligomer metal complexes than monomer against thermo-oxidative decomposition. The weight loss of OFPIMP was found to be 97.00% at 900 °C. The weight losses of OFPIMP-Co, OFPIMP-Ni OFPIMP-Cu oligomer-metal complex compounds were found to be 88.66%, 94.36% and 83.21%, respectively, at 1000 °C.     

Highly enantioselective addition of linear alkyl alkynes to linear aldehydes

It is discovered that the use of biscyclohexylamine (Cy₂NH) as an additive can greatly enhance the enantioselectivity for the reaction of linear alkyl alkynes with linear aldehydes. The combination of (S)-BINOL (20 mol %), Cy₂NH (5 mol %), ZnEt₂ (2 equiv), and Ti(OⁱPr)₄ (0.5 equiv) catalyzes the reaction at room temperature in diethyl ether solution with 81-89% ee and 57-77% yield.     

Intramolecular Diels-Alder reaction of α-fluoroacrylate derivatives promoted by novel bidentate aluminum Lewis acid

Intramolecular Diels-Alder (IMDA) reaction of α-fluoroacrylate derivatives 1a-e having 1,7,9-decatrienoate system is efficiently promoted by the novel bidentate Lewis acid A generated in situ by mixing 3,3′,5,5′-tetrabromo-1,1′-biphenyl-2,2′-diol (Br₄BIPOL, 1 mol) and trimethylaluminum (2 mol). The IMDA reaction of α-fluoroacrylates proceeds via endo-boat transition state as in the case of the corresponding non-fluorinated acrylate.     

Bis-aluminated triflic amide promoted Diels-Alder reactions of α,β-unsaturated lactones

The bis-aluminated triflic amides such as TfN[Al(Me)Cl]₂ and TfN[Al(iBu)₂]₂, which are derived from triflic amide (1 mol) and aluminum reagent (2 mol), can efficiently promote the Diels-Alder reaction of α,β-unsaturated lactone derivatives as dienophiles. Selection of the ligand on aluminum of these Lewis acids should be important depending on the combination of dienophile and 1,3-diene.     

N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation

The liquid-liquid equilibria (LLE) of four ternary systems comprising toluene, heptane, and an ionic liquid with the cation N-butylpyridinium ([bpy]), or 2-methyl-N-butylpyridinium ([2bmpy]), or 3-methyl-N-butylpyridinium ([3bmpy]), or 4-methyl-N-butylpyridinium ([4bmpy]), and the anion bis-(trifluoromethylsulfonyl)imide ([Tf₂N]) were determined at 313.2 K and atmospheric pressure. The distribution ratios and the separation factor curves from the LLE data were plotted and compared to those for sulfolane. The results show no significant differences in the values of these parameters between [bpy][Tf₂N] and [2bmpy][Tf₂N], and between [3bmpy][Tf₂N] and [4bmpy][Tf₂N]. The experimental LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

Concise [4+3] cycloaddition reaction of pyrroles leading to tropinone derivatives

A concise [4+3] cycloaddition reaction of pyrroles with 2-(silyloxy)allyl cations has been developed. The oxyallyl cations stabilized with a methylthio group or geminal methyl groups were generated from the corresponding allylic alcohols under the influence of a Brönsted acid (Tf₂NH), respectively. The use of N-nosyl-protected pyrroles as the four-carbon unit was found to give tropinone derivatives in high yield.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.     

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C₄–C₁₀) and anion type (tetrafluoroborate ([BF₄]⁻), hexafluorophosphate ([PF₆]⁻) and bis(trifluoromethylsulfonyl)imide ([Tf₂N]⁻)) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n = 3 columns) for retention time and peak area ranged was 0.80–1.13% and 3.71–4.58%, respectively. In addition, a good repeatability of RSD_{Retention time} = <0.30% and ∼1.0%, RSD_{Peak area} = <1.30% and <4.3%, and RSD_Efficiency = <0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim][BF₄]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4–C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim][Tf₂N]) successfully decreased the denseness of the monolith, than when using [C₄mim][Tf₂N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (∼10 min), entirely green (organic solvent-free) and energy saving process.     

Ruthenium-catalyzed formal [4 + 2] cycloaddition of alkynes with alkenes: formation of cyclohexenedicarboxylates via isomerization of alkynes and successive Diels-Alder reaction

Formal [4 + 2] cycloaddition of alkynes with electron-deficient alkenes, which affords 3,6-dialkyl-4-cyclohexene-1,2-dicarboxylates, was achieved using Ru(η⁶-1,3,5-cyclooctatriene)(η²-dimethyl fumarate)₂ as a catalyst. The reaction mechanism consists of two steps, isomerization of an alkyne to conjugated dienes and successive Diels-Alder reaction of the generated dienes with an electron-deficient alkene.     

Coordination environment of [UO2Br4] in ionic liquids and crystal structure of [Bmim]2[UO2Br4]

The complex formed by the reaction of the uranyl ion, UO₂²⁺, with bromide ions in the ionic liquids 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][Tf₂N]) and methyl-tributylammonium bis(trifluoromethylsulfonyl)imide ([MeBu₃N][Tf₂N]) has been investigated by UV–Vis and U L_III-edge EXAFS spectroscopy and compared to the crystal structure of [Bmim]₂[UO₂Br₄]. The solid state reveals a classical tetragonal bipyramid geometry for [UO₂Br₄]²⁻ with hydrogen bonds between the Bmim⁺ and the coordinated bromides. The UV–Vis spectroscopy reveals the quantitative formation of [UO₂Br₄]²⁻ when a stoichiometric amount of bromide ions is added to UO₂(CF₃SO₃)₂ in both Tf₂N-based ionic liquids. The absorption spectrum also suggests a D_4h symmetry for [UO₂Br₄]²⁻ in ionic liquids, as previously observed for the [UO₂Cl₄]²⁻ congener. EXAFS analysis supports this conclusion and demonstrates that the [UO₂Br₄]²⁻ coordination polyhedron is maintained in the ionic liquids without any coordinating solvent or water molecules. The mean U–O and U–Br distances in the solutions, determined by EXAFS, are, respectively, 1.766(2) and 2.821(2) Å in [Bmim][Tf₂N], and, respectively, 1.768(2) and 2.827(2) Å, in [MeBu₃N][Tf₂N]. Similar results are obtained in both ionic liquids indicating no significant influence of the ionic liquid cation either on the complexation reaction or on the structure of the uranyl species.