Asymmetric synthesis of α-mercapto-β-amino acid derivatives: application to the synthesis of polysubstituted thiomorpholines

Tandem conjugate addition of homochiral lithium N-benzyl-N-(α-methyl-p-methoxybenzyl)amide to tert-butyl cinnamate and enolate trapping with TsS^tBu proceeds with high diastereoselectivity to give a homochiral anti-α-tert-butylthio-β-amino ester. Stepwise deprotection gives the corresponding free α-tert-butylthio-β-amino acid without epimerisation. Tandem conjugate addition of homochiral lithium N-allyl-N-(α-methylbenzyl)amide to tert-butyl cinnamate and enolate trapping with TsS^tBu followed by conversion of the S-tert-butyl group to a disulphide, and reduction with Lalancette’s reagent generates polysubstituted thiomorpholine derivatives.     

Solid state conformations of α,β-unsaturated hydroxamates derived from the ‘chiral Weinreb amide’ auxiliary (S)-N-1-(1′-naphthyl)ethyl-O-tert-butylhydroxylamine

α,β-Unsaturated hydroxamates derived from the ‘chiral Weinreb amide’ auxiliary (S)-N-1-(1′-naphthyl)ethyl-O-tert-butylhydroxylamine consistently adopt a defined conformation and undergo highly diastereoselective conjugate addition reactions with lithium amide reagents. The configuration of the N-1-(1′-naphthyl)ethyl group dictates the position of the O-tert-butyl group and also the configuration adopted by the pyramidal nitrogen atom via a ‘chiral relay’ effect. Conjugate addition of lithium amide reagents to these substrates proceeds on the face opposite to both the O-tert-butyl group and nitrogen lone-pair with high levels of diastereoselectivity.     

Improved solid-phase synthesis and study of arylopeptoids with conformation-directing side chains

The development of an improved methodology for iterative solid-phase synthesis of para- and meta-arylopeptoids (oligomeric N-substituted aminomethyl benzamides) using benzoyl chloride building blocks is described. This methodology has enabled the synthesis of arylopeptoids with tert-butyl and phenyl side chains, which allows for complete control over the amide conformation: the tert-butyl results in a 100% cis amide conformation while the phenyl side chain results in a 100% trans amide conformation. The method has furthermore enabled the first synthesis and preliminary conformational studies of arylopeptoids bearing (S)-N-(1-phenylethyl) side chains.     

Copper(II) tetrafluoroborate as a novel and highly efficient catalyst for N-tert-butoxycarbonylation of amines under solvent-free conditions at room temperature

Commercially available copper(II) tetrafluoroborate hydrate was found to be a highly efficient catalyst for chemoselective N-tert-butoxycarbonylation of amines with di-tert-butyl dicarbonate under solvent-free conditions and at room temperature. Various aromatic amines were protected as their N-tert-butyl carbamates in high yields and in short times. No competitive side reactions such as isocyanate, urea, and N,N-di-t-Boc formation was observed. Chemoselective N-tert-butoxycarbonylation was achieved with substrates bearing OH and SH groups. Chiral α-amino acid esters afforded the corresponding N-t-Boc derivatives in excellent yields.     

Asymmetric synthesis of homochiral Baylis–Hillman products employing (R)-N-methyl-N-α-methylbenzyl amide

The conjugate addition of (R)-N-methyl-N-α-methylbenzyl amide to tert-butyl cinnamate followed by an asymmetric aldol reaction and subsequent N-oxidation/Cope elimination affords β-substituted homochiral Baylis–Hillman products in good yield.     

Nickel-catalyzed organozinc-induced unexpected 1,3-migration of tert-butyl from sulfur to carbon in N-tert-butanesulfinyl iminoacetates

The nickel-catalyzed reaction for an unexpected 1,3-migration of tert-butyl from sulfur to carbon, upon treatment of functionalized N-tert-butanesulfinyl iminoacetate in the presence of organozinc reagent, was developed. The generality has been explored by considering the flexibility in the structure of each reactive component, organozinc halide and N-tert-butanesulfinyl iminoacetate.     

An efficient method for the conversion of aromatic and aliphatic nitriles to the corresponding N-tert-butyl amides: a modified Ritter reaction

Aromatic and aliphatic nitriles react with tert-butyl acetate in the presence of a catalytic amount of sulfuric acid to give the corresponding N-tert-butyl amides in excellent yields.     

Facile N-tert-butoxycarbonylation of amines using La(NO3)3·6H2O as a mild and efficient catalyst under solvent-free conditions

Facile N-tert-butoxycarbonylation of amines is described by the treatment of various primary, secondary, benzylic and aryl amines with di-tert-butyl dicarbonate in the presence of catalytic amounts of La(NO₃)₃·6H₂O under solvent-free conditions at room temperature to afford N-tert-butylcarbamates in excellent yields.     

Enantioselective synthesis of d- and l-α-methylcysteine with hydantoinase

A scalable and cost-effective synthesis of d- and l-α-methylcysteine is described. A key step is d-selective cyclization of N-carbamoyl S-tert-butyl-d,l-α-methylcysteine catalyzed by hydantoinase. d-5-tert-Butylthiomethyl-5-methylhydantoin and N-carbamoyl S-tert-butyl-l-α-methylcysteine were obtained with excellent yield and optical purity, and these compounds were easily separated by filtration. After hydrolysis and cleavage of the tert-butyl group, d- and l-α-methylcysteine hydrochloride were obtained.     

Concise and highly selective asymmetric synthesis of acosamine from sorbic acid

Diastereoselective conjugate addition of lithium (R)-N-benzyl-N-(α-methylbenzyl)amide to tert-butyl sorbate and subsequent chemo- and diastereoselective ammonium-directed olefinic oxidation of the resultant conjugate addition product {tert-butyl (3S,αR)-3-[N-benzyl-N-(α-methylbenzyl)amino]hex-4-ene} have been used as the key steps in a concise and highly selective asymmetric synthesis of the 2,3,6-trideoxy-3-aminohexose l-acosamine. This sequence of two chemical operations allows rapid assembly of the molecular architecture and facilitates the de novo asymmetric synthesis of methyl N,O-diacetyl-α-l-acosaminide in only 7 steps from commercially available sorbic acid in 15% overall yield.     

N-substitution of polybenzimidazoles: Synthesis and evaluation of physical properties

Series of N-substituted polybenzimidazoles (PBI) were synthesized using selective alkyl groups with varying bulk and flexibility, viz., methyl, n-butyl, methylene trimethylsilane and 4-tert-butylbenzyl. PBI-I based on 3,3′-diaminobenzidine (DAB) and isophthalic acid and PBI-BuI based on DAB and 5-tert-butyl isophthalic acid were chosen for N-substitution. Structural characterizations of substituted polymers by FT-IR and ¹H NMR revealed elimination of hydrogen bonding. Evaluation of their physical properties revealed that N-substitution rendered better solvent solubility in common organic solvents, more open polymer matrix, but reduced thermal properties in comparison to their respective parent PBI. 4-tert-butylbenzyl, methylene trimethylsilane or n-butyl group substituted polymers were soluble even in chlorinated solvents (CHCl₃ and TCE). Substantial variations in gas permeability of inert gases, He and Ar and attractive P_He/P_Ar selectivity, especially after methyl group substitution depicted potential of these materials for gas separation.     

Asymmetric synthesis of (−)-(R)-sitagliptin

The asymmetric synthesis of (?)-(R)-sitagliptin was achieved in seven steps from commercially available starting materials using the highly diastereoselective conjugate additions of either lithium (R)-N-benzyl-N-(α-methylbenzyl)amide or lithium (R)-N-benzyl-N-(α-methyl-p-methoxybenzyl)amide to tert-butyl 4-(2′,4′,5′-trifluorophenyl)but-2-enoate to install the correct stereochemistry. Subsequent sequential acid-catalysed hydrolysis of the resultant β-amino esters, HOBt/EDC mediated coupling with the triazolopyrazine fragment, and hydrogenolysis gave (?)-(R)-sitagliptin in 43% and 42% overall yields, respectively.     

Kinetics of heat-induced and photochemical transformations of quinonimines and their derivatives

Heat-induced transformations of N-[2,6-diisopropylphenyl]-3,5-di(tert-butyl)-, N-[2,6-diethylphenyl]-3,5-di(tert-butyl)-, and N-[2-methyl-6-ethylphenyl]-3,5-di(tert-butyl)-o-benzoquinonimines in nonane follow the first-order rate equation, whereas that of N-[2,5-di(tert-butyl)phenyl]-3,5-di(tert-butyl-o-benzoquinonimine obey the second-order rate equation. Kinetic parameters of these reactions have been determined. 4aH-Phenoxazine derivatives of quinonimines are intermediates of the heat-induced transformations following the first-order kinetics; under the irradiation with 405 nm light they undergo the ring opening to give the starting compounds with quantum yield close to unity.     

New methodology for the preparation of N-tosyl aziridine-2-carboxylates

N-Tosyl aziridine-2-carboxylate methyl esters were prepared from methyl N-tosyl-l-serinate or N-tosyl-l-threoninate, tosyl chloride, and K₂CO₃, under phase-transfer catalysis (PTC) conditions. The same methodology, as applied to the tert-butyl N-tosyl-l-serine amide, afforded the corresponding newly prepared aziridine-2-carboxamide, as an enantiomerically pure compound.     

Facile synthesis of primary amides and ketoamides via a palladium-catalysed carbonylation-deprotection reaction sequence

Various primary amides and ketoamides have been obtained in good yields in a two-step reaction sequence. The first step involves the synthesis of aryl/alkenyl N-tert-butyl amides and aryl N-tert-butyl ketoamides from the corresponding iodides via palladium-catalysed carbonylation in the presence of t-BuNH₂ as the nucleophile. Carbonylation was followed by selective cleavage of the t-Bu group using TBDMSOTf as the reagent.     

Stereoselective synthesis of isoindolinones and tert-butyl sulfoxides

A reaction of Grignard reagents with an optically pure N-sulfinylimine derived from methyl 2-formylbenzoate yields enantioenriched isoindolinones and tert-butyl sulfoxides. The products are formed by the addition of the nucleophile to N-sulfinylimine followed by cyclization to form N-tert-butylsulfinylisoindolinone, which readily undergoes substitution with a second equivalent of Grignard reagent. The reaction can be carried out in dichloromethane at room temperature or at elevated temperatures without any loss of stereoselectivity. The use of nucleophiles other than Grignard reagents has also been investigated.     

N-tert-Butoxycarbonylation of amines using H3PW12O40 as an efficient heterogeneous and recyclable catalyst

The commercially available heteropoly acid H₃PW₁₂O₄₀ (0.5 mol %) is a very efficient and environmentally benign catalyst for N-tert-butoxycarbonylation of amines (primary, secondary) with di-tert-butyl dicarbonate at room temperature in short reaction times (<10 min). No competitive side products such as isocyanates, ureas, N,N-di-tert-butoxycarbonyls, O-Boc and oxazolidinones were observed. Chiral α-amino alcohols and esters afforded the corresponding N-Boc derivatives chemoselectively in excellent yields.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

A simple approach to the synthesis of dialkyl 5-tert-butylamino-[2,2′]bifuranyl-3,4-dicarboxylates

Reaction of tert-butyl isocyanide with electron-deficient acetylenic esters in the presence of N¹-[(Z)-1-benzoyl-3-oxo-3-phenyl-1-propenyl]-2-(2-furyl)-2-oxoacetamide leads to dialkyl 5-tert-butylamino-[2,2′]bifuranyl-3,4-dicarboxylates in moderate yields.     

Functionalizing ps microspheres by supercritical deposition of P(S-<Emphasis Type="Italic">b</Emphasis>-<Emphasis Type="Italic">t</Emphasis>BA) for diverse interfacial properties exemplified with biocidal ability

Polystyrene（PS） microspheres were functionalized with poly（styrene-b-tert-butyl acrylate）（P（S-b-tBA）） by adsorption from supercritical mixture of CO₂ and hexane.Supercritical deposition formed a shell-core structure that contained a shell of poly（tert-butyl acrylate）（PtBA） blocks and a core of the PS blocks entangling with the PS microspheres. The thickness of the PtBA layer and thereby the areal density of tert-butyl ester groups increased with the deposition pressure until plateau values attained at 20 MPa and higher.The tert-butyl ester groups were hydrolyzed to carboxyl groups for conjugation with tert-butylamine molecules via amide bonds that were further chlorinated into biocidal N-halamine moieties. The functionalization layer and its bonded N-halamine moieties were stable in flowing water and the chlorine could be regenerated upon eventual loss.This functionalization concept is applicable to polymers of any external and internal surfaces to achieve diverse surface properties by varying block copolymer and conjugated moieties.