Molecular interactions in (2,4,6-trimethyl-1,3,5-trioxane + n-alkyl acetates) at T = (298.15, 303.15, and 308.15) K

Densities and viscosities of the binary mixtures of 2,4,6-trimethyl-1,3,5-trioxane with methyl acetate, ethyl acetate, and 1-butyl acetate were measured over the entire mole fractions at (298.15, 303.15, and 308.15) K. Using the experimental values of densities ρ and viscosities η, excess molar volumes V^E, viscosity deviations δη were calculated. The values of excess molar volumes V^E and viscosity deviations δη were fitted to the Redlich-Kister polynomial.     

(p, Vm, T) measurements of (cyclohexane + nonane) at temperatures from 298.15 K to 328.15 K and at pressures up to 40 MPa

The densities and speeds of sound of (cyclohexane + nonane) were measured at four temperatures from 298.15 K to 328.15 K, and the respective values of excess volumes and adiabatic compressibility were calculated. Thereafter, the densities for the last system were measured at elevated pressures (0.1 to 40) MPa at four temperatures over the range 298.15 K to 328.15 K with a high-pressure apparatus. The high-pressure density data were fitted to the Tait equation and the isothermal compressibilities were calculated with a novel procedure with the aid of this equation. The low- and high-pressure values of calculated from the density data show that the deviations from ideal behaviour in the system decrease slightly as the temperature and pressure are raised. The data were fitted to the fourth-order Redlich-Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters.     

Syntheses,structures and luminescent properties of four copper(I) cyanide coordination polymers based on 2-(n-pyridyl)benzimidazole ligands (n = 2, 3, 4)

Four copper(I) cyanide coordination polymers containing 2-(n-pyridyl)benzimidazole ligands, namely [Cu₂(CN)(2-PyBIm)]_n (1), [Cu₂(CN)₂(3-PyHBIm)]_n (2), {[Cu₃(CN)₃(4-PyHBIm)₄] · 2H₂O}_n (3) and [Cu₅(CN)₃(4-PyBIm)₂]_n (4), have been synthesized and characterized by X-ray crystallography. Complex 1 is a one-dimension coordination polymer in which 2-(2-pyridyl)benzimidazole is deprotonated and adopts a bridging tridentate coordination mode. Complex 2 has ladder-like structure in which 2-(3-pyridyl)benzimidazole does not deprotonate and acts as a bidentate bridge. Complex 3 displays a saddle-shaped helical chain constructed through μ₂-cyanide group and the outstretched neutral 2-(4-pyridyl)benzimidazole monodentate ligand. Complex 4 shows two-dimension layer polymeric structure in which deprotonated 2-(4-pyridyl)benzimidazole acts as a tridentate bridging ligand. The cyanide groups in four complexes all act as bidentate bridging ligands. These complexes are thermal stable and display luminescence in the solid states.     

Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)

Isobaric vapor-liquid equilibrium (VLE) data for acetic acid + water, acetic acid + n-propyl acetate, acetic acid + iso-butyl acetate, acetic acid + water + n-propyl acetate, acetic acid + water + iso-butyl acetate are measured at 101.33 kPa with a modified Rose still. The nonideal behavior in vapor phase caused by the association of acetic acid are corrected by the chemical theory and Hayden-O’Connell method, and analyzed by calculating the second virial coefficients and apparent fugacity coefficients. The VLE data for acetic acid + water, acetic acid + n-propyl acetate, and acetic acid + iso-butyl acetate are correlated through the NRTL and UNIQUAC models using the nonlinear least square method. The obtained NRTL model parameters are used to predict the ternary VLE data. The ternary predicted values obtained in this way agree well with the experimental values.     

Reductive elimination of halogens assisted by phosphine ligands in Fe(CO)4X2 (X = I, Br) complexes

Fe(CO)₄X₂ complexes [X = I (1), Br(1′)] react with phosphine ligands L (L = PMe₃, PEt₃, PMe₂Ph, PMePh₂, PPh₃) via a two-step mechanism: in the first step fac-Fe(CO)₃LX₂ complexes are formed; in the second step two parallel pathways, a and b, are observed; in pathway a, reductive elimination with formation of equimolar amounts of Fe(CO)₃L₂ (5) and phosphonium salts [LX]⁺X⁻ is observed; in pathway b, disubstituted dihalide complexes cis,trans,cis-Fe(CO)₂L₂X₂ are formed. The relative weights of pathways a and b depend on the basicity, steric hindrance and concentration of ligand L, on the nature of the halogen and on temperature. A radical mechanism which accounts for most of the experimental results is proposed.     

Ti(II)-mediated domino cyclization of 2-functionalized 1-halo-2,n-enynes (n = 7, 8) to bicyclic compounds

The reaction of 2-functionalized 1-halo-2,n-enynes (n = 7 or 8) with a divalent titanium reagent, Ti(O-i-Pr)₄/2i-PrMgCl, proceeded in a domino fashion to afford bicyclic compounds in good yields.     

Preparation, crystal structures, EPR and reflectance spectra of two new charge-transfer salts, [CpFeCpCH2N(CH3)3]4[XMo12O40] · nCH3CN (n = 0 for X = P or n = 1 for X = Ge)

Two new charge-transfer salts, [CpFeCpCH₂N(CH₃)₃]₄[PMo₁₂O₄₀] · CH₃CN (1) and [CpFeCpCH₂N(CH₃)₃]₄[GeMo₁₂O₄₀] (2), were synthesized by the traditional solution synthetic method and their structures were determined by single-crystal X-ray analysis. Salt 1 belongs to the triclinic space group P1, and salt 2 belongs to the triclinic space group . There exist the complex interactions of the cationic ferrocenyl donor and Keggin polyanion in the solid state. The solid state UV-Vis diffuse reflectance spectra indicate the presence of a charge-transfer band climbing from 450 nm to well beyond 900 nm for 1, a charge-transfer band from 460 to 850 nm with λ_max = 630 nm for 2.The EPR spectra of salts 1 and 2 at 77 K show a signal at g = 2.0048 and 1.9501, respectively, ascribed to the delocalization of one electron in reduced Keggin ion in salt 1 and the Mo^VI in [GeMo₁₂O₄₀]⁴⁻ is partly reduced to Mo^V owing to the charge-transfer transitions taking place between the ferrocenyl donors and the POM acceptors. The two compounds were also characterized by IR spectroscopy and cyclic voltammetry.     

Template-directed synthesis of macrocyclic aminopyridines: azacalix[n](2,6)pyridines (n = 3, 4)

Template-induced synthetic routes for azacalix[n](2,6)pyridines (n = 3, 4) have been elaborated. The proton and nickel ion served as the efficient template for the cyclization reactions, and the presence of the templates preferentially afforded the cyclic trimers and tetramers in moderate to good yields, respectively. The compatibility of the cyclic tetramer with nickel ion was also confirmed by X-ray crystallography.     

New stable germylenes, stannylenes, and related compounds: 6. Heteroleptic germanium(II) and tin(II) compounds [(SiMe3)2N-E-OCH2CH2NMe2]n (E = Ge, n = 1; Sn, n = 2): synthesis and structure

New stable heteroleptic germanium(II) and tin(II) compounds [(SiMe₃)₂N-E¹⁴-OCH₂CH₂NMe₂]_n (E¹⁴ = Ge, n = 1 (1), Sn, n = 2 (2)) have been synthesized and their crystal structures have been determined by X-ray diffraction analysis. While compound 1 is monomer stabilized by intramolecular Ge ← N coordination, compound 2 is associated to dimer via intermolecular dative Sn ← O interactions.     

Synthesis and characterization of (CHCH)n-bridged (n = 1, 2, 3) heterobimetallic and trimetallic ferrocene-ruthenium complexes

A series of heterobinuclear ferrocene-ruthenium complexes Fc(CHCH)_nRuCl(CO)(PMe₃)₃ (n = 1, 3; n = 2, 12), Fc(CHCH)RuCl(CO)(Py)(PPh₃)₂ (4), and trimetallic Fc(CHCH)RuCl(CO)(PPh₃)₂(Py-E-(CHCH)Fc) (6) have been prepared. The length of the molecular rods is extended by successive insertion of CHCH spacers in the bridging ligands or the ancillary ligands. The respective products have been fully characterized and the structures of 3 and 12 have been established by X-ray crystallography. Electrochemical studies have revealed that ethenyl heterobimetallic complexes display two successive one-electron processes, and that intermetallic electronic communication between the two endgroups is attenuated with the increase of the length of the conjugated bridge. The electrochemical behavior of the trimetallic complex reveals strong electronic communication between ruthenium and ferrocene transmitted through the ethenyl bridge, however, it also reveals a very weak interaction between ruthenium and ferrocene transmitted through the (E)-CHCH-Py bridge.     

Reactions of C5H5M (M = Fe, Ni) with substituted thiophenes

The ion molecule reactions between C₅H₅M⁺ (M = Fe, Ni) with some substituted thiophenes have been studied in an ion trap mass spectrometer. The reactions of halogen substituted thiophenes lead to the formation of a new C-C bond between the cyclopentadiene ring and the thiophene with the loss of a neutral HX. The reaction mechanism has been investigated by means of DFT calculations and it was found that the insertion of the metal atom in the C-X bond is the key step in the process.     

Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.     

2D hydrogen bond networks in the crystals of [(NH4 · H2O)2][(RO)(Fc)P(S)2]2 (R = 3-(BzO)-Bz, 4-(n-Bu)-Bz, Bz = benzyl)

Herein we report on the preparation of hydrated ammonium salts of the dithiophosphonic acids (RO)(Fc)P(S)(SH) (R = derivative of benzyl) featuring [(NH₄ · H₂O)₂]²⁺ cations formed by N-H?O hydrogen bonds. Interaction of these cations with the PS₂⁻ units gives rise to unprecedented 2D networks, formed solely by hydrogen bonds. These unique networks containing two- and three centered hydrogen bonds are valuable examples of the acceptor properties of sulfur atoms.     

NMR spectra of silatranes and M ← N (M = C, Si, Ge, Sn, Pb) bond lengths in atranes: Substituent effects

The literature data on X substituent influence on the ¹H, ²⁹Si and ¹⁵N NMR chemical shifts (δ) and coupling constants (J) of Si-substituted silatranes , as well as M-N bond lengths (d) in atranes (M = C, Si, Ge, Sn, Pb) have been analyzed. It was established for the first time that the δ, J and d values depend not only on the inductive and resonance effects but also on the polarizability of X substituents. The polarizability contribution ranges from 8% to 25%.     

Dinitrogen extrusion from diazidophenylborane: Computational analysis of PhBNx (x = 6, 4, 2) isomers

The energies and structures of possible intermediates in the dinitrogen extrusion from diazidophenylborane 4a to give phenylborylene 11a were determined using density functional (B3LYP), multiconfigurational (CASSCF and MRMP2), and coupled cluster (CCSD(T)) computations in conjunction with basis sets of up to cc-pVTZ quality. Formation of 11a and nitrogen from 4a is an exothermic process (−21 kcal mol⁻¹). The triplet electronic ground state of azidophenylborylnitrene 5a (PhBN₄) is only 26 kcal mol⁻¹ higher in energy than 4a and the phenyl shift in 5a to yield N-azidophenyliminoborane 7a is highly exothermic.     

Unsaturation in trinuclear cobalt carbonyl compounds of the type ECo3(CO)n (E = CH,CF, P,As; n = 9, 8, 7, 6) with Co3E tetrahedrane structures

Theoretical studies on the known trinuclear cobalt carbonyl derivatives ECo₃(CO)₉ (E = CH, CF, P, As) predict structures with carbonyl groups bridging each edge of the Co₃ triangle in contrast with experiment where structures with all terminal carbonyl groups are found in all cases. However, the energy differences are predicted to be rather small ranging from 4 ± 2 kcal/mol for FCCo₃(CO)₉ to 10 ± 3 kcal/mol for AsCo₃(CO)₉. The global minima for the unsaturated ECo₃(CO)_n (n = 8, 7, 6) derivatives generally have two (for n = 8) or three (for n = 7 and 6) carbonyl groups bridging the edges of the Co₃ triangle. However, structures with all terminal carbonyl groups are also found in all cases as well as higher energy structures in which one of the carbonyl groups bridges all three cobalt atoms. The fluoromethinyl derivatives FCCo₃(CO)_n (n = 9, 8, 7) are anomalous since their unbridged structures or structures with a carbonyl group bridging all three cobalt atoms are closer in energy to the doubly or triply bridged global minima than is the case for the other ECo₃(CO)_n derivatives.     

New examples of mixed organochalcogene compounds: Synthesis, structural features and spectroscopic data of [PhSe(etu)][PhTeX4] (Ph = phenyl; etu = ethylenethiourea; X = Br, I)

(PhSe)₂ reacts with Br₂, ethylenethiourea and PhTeBr₃, further with I₂, ethylenethiourea and PhTeI₃, to give [PhSe(etu)][PhTeBr₄] (1) (Ph = phenyl; etu = ethylenethiourea) and [PhSe(etu)][PhTeI₄] (2) in very good yields.The tellurium centers present a distorted octahedral configuration, achieved through dimerization involving secondary, reciprocal Te···X interactions.In both compounds the anionic dimmers are linked through X···X interactions, attaining a one-dimensional, polymeric assembly along the b axis. Cations and anions are linked through short Se···X contacts. In addition to single crystal X-ray data, multinuclear NMR results for 1 and 2 are also presented and discussed.