5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮的合成及结构表征

本文以4-甲基邻苯二甲酸酐为原料, 成功地合成了5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2). 通过元素分析、核磁共振、红外光谱及质谱等测试手段, 确定了化合物2的结构与存在形式, 通过ESR测试发现化合物2具有顺磁性.     

One-pot synthesis of 5,5′-dibromo-2,2′-dipyridylacetylene and its boronic acid derivative

5,5′-Dibromo-2,2′-dipyridylacetylene was prepared from 2,5-dibromopyridine and (trimethylsilyl)acetylene via the new one-pot synthesis approach using a regioselective palladium-catalyzed coupling reaction with a 60% yield. Several protocols of lithium-halogen exchange were then attempted to synthesize 6,6′-(1,2-ethynediyl)bis[3-pyridylboronic acid] from 5,5′-dibromo-2,2′-dipyridylacetylene. The former was successfully obtained with a 54% yield by a reverse addition method using toluene and THF and it showed potential as a useful building block for cross-coupling reactions in the formation of carbon-carbon bonds.     

Synthesis of 5,5′-diarylated 2,2′-bithiophenes via palladium-catalyzed arylation reactions

2,2′-Bithiophene and 3,3′-dicyano-2,2′-bithiophenes are diarylated directly with aryl bromides at the 5- and 5′-positions accompanied by C-H bond cleavage in the presence of Pd(OAc)₂ and a bulky phosphine ligand using Cs₂CO₃ as base. In the reaction using (2,2′-bithiophen-5-yl)diphenylmethanol as the substrate, monoarylation at the 5-position via C-C bond cleavage occurs selectively to give 5-aryl-2,2′-bithiophenes and the subsequent arylation with a different aryl bromide affords the corresponding unsymmetrically 5,5′-diarylated products.     

Scandium triflate-catalyzed 6,6′-diiodination of 2,2′-dimethoxy-1,1′-binaphthyl with 1,3-diiodo-5,5-dimethylhydantoin

Scandium triflate-catalyzed iodination of 2,2′-dimethoxy-1,1′-binaphthyl with 2 equiv of 1,3-diiodo-5,5-dimethylhydantoin (DIH) proceeded to give 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl in 98% yield and subsequent deprotection of methyl groups provided 6,6′-diiodo-1,1′-binaphthol, which is a useful ligand or reagent for many enantioselective transformations. Use of 2 equiv of NIS in place of DIH in the presence of scandium triflate, however, did not successfully yield 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl, indicating that one of two types of iodine atoms in DIH is more reactive toward the iodination than iodine in NIS.     

A new route to 2,2′,3,3′-tetrasubstituted binaphthyls

Based on an ortho-lithiation protocol of 2,2′-dibromo-1,1′-binaphthyl four tetrasubstituted binaphthyls, 2,2′-dibromo-3,3′-diiodo-, 3,3′-dibromo-2,2′-diiodo-, 2,2′,3,3′-tetrabromo-, and 2,2′,3,3′-tetraiodo-1,1′-binaphthyls have been prepared in excellent yield which in turn proved to be versatile key intermediates in the synthesis of various 2,2′,3,3′-tetrasubstituted 1,1′-binaphthyl derivatives.     

The redox behaviour of cyclic tetraaminoethenes derived from 2,2′-biimidazole

Syntheses and redox chemistry of the nearly unknown 4,4′,5,5′-tetraamino derivatives of 2,2′-biimidazole are studied. These cyclic versions of electron-rich ethenes are only stable under strictly anaerobic conditions. In the presence of oxygen, a fast oxidation reaction occurs to form stable, deeply coloured tetraazafulvalenes. Leuco-forms, however, can be stabilized towards air by acylation reactions. This accounts for the hexa-Boc derivative 6. Based on these findings, we present the first synthesis of tetraazafulvalenes, which possess four peripheric secondary amine functions.     

6,6′-Dimethyl-2,2′-bipyridine-4-ester: A pivotal synthon for building tethered bipyridine ligands

We describe an efficient and scalable synthesis of 4-carbomethoxy-6,6′-dimethyl-2,2′-bipyridine starting from easily available substituted 2-halopyridines and based on the application of modified Negishi cross-coupling conditions. This compound is a versatile starting material for the synthesis of 4-functionalized 2,2′-bipyridines bearing halide, alcohol, amine, and other functionalities, suitable for conjugation to biological material (2a-c, 3a-g). The utility of this compound in the construction of more complex architectures was further demonstrated by the synthesis of two bifunctional lanthanide chelators; an open chain ligand based on one 2,2′-bipyridine unit and a cryptand based on three 2,2′-bipyridine units [N₂(bpy)₃COOMe]. In the field of luminophoric biolabels, the photophysical properties of the corresponding Eu(III) cryptate are reported.     

On the oxidative coupling of N,N-disubstituted 2-aminothiophenes—synthesis of N,N′-persubstituted 5,5′-diamino-2,2′-bithiophenes

The oxidative coupling of N,N-disubstituted 2-aminothiophenes performed by several heavy-metal free oxidizing agents gives rise to the formation of N,N′-persubstituted 5,5′-diamino-2,2′-bithiophenes which are of interest as hole-transport materials for optoelectronic applications.     

Synthesis and characterization of 6,6″′-bis(anthracen-9-yl)-2,2′;6′,2″;6″,2″′-quaterpyridine

New bianthracene-quaterpyridine ligand 6,6″′-bis(anthracen-9-yl)-2,2′;6′,2″;6″,2″′-quaterpyridine L has been obtained in a multistep synthesis using Suzuki–Miyaura and Stille-type coupling reactions. The dianthracene ligand L has four nitrogen-donor atoms and can form different supramolecular architectures with transition metal ions. Ligand L and intermediate compounds have been characterized by spectroscopic methods and elemental analyses. 2-(Anthracen-9-yl)-6-bromopyridine and 6-(anthracen-9-yl)-6′-bromo-2,2′-bipyridine have been also characterized by X-ray crystallography.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

The first approach to optically active 2,2′-bipyridine alkyl sulfoxides

The synthesis of 6,6′-bis(alkylsulfanyl)-2,2′-bipyridines and their asymmetric oxidation to non-racemic 2,2′-bipyridine alkyl sulfoxides using either (+)-(8,8-dichlorocamphorylsulfonyl)oxaziridine or a modified Sharpless reagent is reported.     

Condensations of N-arylhydroxylamines for the preparation of 5,5′-di-tert-butyl-2,2′-dihydroxydiphenylamine

Acid-promoted condensation of 4-tert-butyl-2-hydroxylaminoanisole with p-tert-butylphenol resulted in the formation of 5,5′-di-tert-butyl-2,2′-dihydroxydiphenylamine upon demethylation with BBr₃. Protection of the acidic phenol unit was required to isolate the acid labile N-arylhydroxylamine intermediate.     

A simple synthesis of 2,2′-bipyrroles from pyrrole

2,2′-Bipyrroles, which are obvious precursors for the synthesis of 2,2′-bipyrrole-based natural products, are synthesized in three steps from pyrrole employing known pyrrolyl ketoalcohols by a sequential alcohol oxidation and Paal-Knorr pyrrole synthesis.     

Synthesis and non-linear optical and redox properties of 6-nitro-6′-piperidyl-2,2′-bisbenzothiazole: a new type of push-pull molecules

The present paper describes the synthesis, the non-linear optical and redox properties of 6-nitro-6′-piperidyl-2,2′-bisbenzothiazole, the first described member of a new family of push-pull structures based in the 2,2′-bisbenzothiazole.     

A convenient synthesis of 6,6′-dimethyl-2,2′-bipyridine-4-ester and its application to the preparation of bifunctional lanthanide chelators

We describe a convenient scalable synthesis of 4-carbomethoxy-6,6′-dimethyl-2,2′-bipyridine based on the application of modified Negishi cross-coupling conditions. The use of this building block in the preparation of a number of dissymmetrically 6,6′-trisubstituted-2,2′-bipyridines and of bifunctional lanthanide chelators is also reported.     

Convenient synthesis of tridentate 2,6-di(pyrazol-1-yl)-4-carboxypyridine and tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligands

Citrazinic acid is used as a convenient starting material for both tridentate 2,6-di(pyrazol-1-yl)-pyridine and tetradentate 6,6′-di(pyrazol-1-yl)-2,2′-bipyridine ligands containing carboxylic groups useful for further anchoring of sensitizer on TiO₂ for dye-sensitized solar cells (DSCs). Using 2,6-dichloro-4-carboxypyridine, the synthesis of the terdentate ligands was improved compared to previously used 2,6-dibromo-4-carboxypyridine or 2,6-dichloro-4-ethylcarboxylate pyridine. Controlling the reaction conditions, it is possible to efficiently obtain the monosubstituted 2-chloro-6-pyrazol-1-yl-4-carboxypyridine, a key intermediate for the preparation of tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligand.     

Synthesis and structural investigation of 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline), 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) and a copolymer with methyl methacrylate by 1D and 2D NMR spectroscopy

Photo-responsive spiropyran-based compounds, such as, 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline) [OHSP], its monomer, such as 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) [MOSP] and its copolymers with methyl methacrylate [MMA] were synthesised using conventional synthetic routes. The copolymerisation was carried out either in tetrahydrofuran [THF] or in toluene using 2,2′-azobisisobutyronitrile [AIBN] as an initiator. The structures of these materials were investigated using ¹H and ¹³C NMR spectroscopy. DEPT-135, HCCOSW and COSY45 NMR experiments were used to assign and interpret the complex structure of spiropyran based materials.     

Synthesis of a novel ditopic ligand incorporating directly bonded 1,10-phenanthroline and 2,2′:6′,2″-terpyridine units

The synthesis of a rigid ditopic ligand incorporating a 1,10-phenanthroline directly connected through its 3-position to the 5-position of a 2,2′:6′,2″-terpyridine is described. The synthesis is based on a series of palladium(0)-catalyzed cross-coupling reactions (Stille and Suzuki couplings) starting from 1,10-phenanthroline and bromo-substituted pyridines.     

A simple one-pot synthesis of functionalised 6-(indol-3-yl)-2,2′-bipyridine derivatives via multi-component reaction under neat condition

A series of 4-aryl-6-(1H-indol-3-yl)-2,2-bipyridine-5-carbonitrile derivatives were synthesized via a one-pot multi-component reaction of aromatic aldehydes, 3-(cyanoacetyl)indole and 2-acetyl pyridine in ammonium acetate by conventional heating and microwave irradiation under solvent-free condition. Also a series of 6,6′-di(1H-indol-3-yl)-4,4′-diaryl-2,2′-bipyridine-5,5′-dicarbonitrile derivatives were synthesized using cinnamils, 3-(cyanoacetyl)indole and ammonium acetate. The methodology affords high yields of product at short reaction time.     

Acid-catalyzed condensation of 2,2′-diamino-1,1′-biaryls for the synthesis of benzo[c]carbazoles

2,2′-Diamino-1,1′-biaryls were found to undergo ring-closure condensation reaction to afford benzo[c]carbazoles in good to excellent yield. Coupled with the synthesis of 2,2′-biaryldiamines from diaryl hydrazides via [3,3]-sigmatropic rearrangement, it constitutes a new efficient synthetic method for benzo[c]carbazoles and related compounds.