Luminescence properties of efficient X-ray phosphors of YBa3B9O18, LuBa3(BO3)3, α-YBa3(BO3)3 and LuBO3

The samples of YBa₃B₉O₁₈, LuBa₃(BO₃)₃, α-YBa₃(BO₃)₃ and LuBO₃ powders have been synthesized by the solid-state reaction methods at high temperature and their X-ray excited luminescent properties were investigated. All the studied materials show a broad emission band in the wavelength range of 300-550 nm with the peak centers at about 385 nm for YBa₃B₉O₁₈ and LuBa₃(BO₃)₃, 415 nm for α-YBa₃(BO₃)₃ and 360 nm for LuBO₃ powders, respectively. Even though those compounds have the different atomic structures, they have the common structural feature of each yttrium or lutetium ion bonded to six separate BO₃ groups, i.e., octahedral RE(BO₃)₆ (RE=Lu or Y) moiety. This octahedral RE(BO₃)₆(RE=Lu or Y) moiety seems to be an important structural element for efficient X-ray excited luminescence of those compounds, as are the edge-sharing octahedral TaO₆ chains for tantalate emission.     

Synthesis and molecular structures of heptafluoropropylated fullerenes: C70(n-C3F7)8, C70(n-C3F7)6O, and C70(C3F7)4

Ampoule reactions of C₇₀ with n- and i-C₃F₇I were carried out at 250-310 °C. Two step HPLC separations allowed the isolation of several C₇₀(n-C₃F₇)_4-8 and C₇₀(i-C₃F₇)₄ compounds. Crystal and molecular structures of C₇₀(n-C₃F₇)₈-V, C₇₀(n-C₃F₇)₆O, C₇₀(n-C₃F₇)₄, and three isomers of C₇₀(i-C₃F₇)₄ have been determined by X-ray crystallography using synchrotron radiation. Molecular structures of the new compounds were compared with the known examples and discussed in terms of addition patterns and relative energies of their formation.     

The infrared and Raman spectra, ab initio calculations and spectral assignments of cyclopropylmethyl dichlorosilane (c-C3H5)SiCl2CH3

Raman spectra of cyclopropylmethyl dichlorosilane (c-C₃H₅)SiCl₂CH₃ as a liquid were recorded at 293 K and polarization data were obtained. Additional Raman spectra were recorded at various temperatures between 293 and 163 K, and intensity changes of certain bands with temperature were detected. No crystallization was ever obtained in the Raman cryostat in spite of extensive annealing. The infrared spectra have been studied as a vapour, as an amorphous solid at 78 K and as a liquid in the range 600-100 cm⁻¹. No infrared bands present in the vapour or liquid seemed to vanish upon cooling, and the sample never formed crystals on the CsI window of an infrared cryostat.The compound exists a priori in two conformers, syn and gauche, and the experimental results suggest an equilibrium in which the gauche conformer has 1.64 kJ mol⁻¹ lower enthalpy than syn in the liquid, leading to 20% syn at ambient temperature. Most of the syn bands were situated close to the corresponding gauche bands and it was difficult to obtain reliable ΔH values.B3LYP calculations with various basis sets and the CBS-QB3 and G2 and G3 models were employed, yielding the conformational enthalpy difference ΔH (syn-gauche) between 2.6 and 3.4 kJ mol⁻¹. Infrared and Raman intensities, polarization ratios and vibrational frequencies for the syn and gauche conformers were calculated. Instead of scaling the calculated wavenumbers in the harmonic approximation, calculations from B3LYP/cc-pVTZ were derived in the anharmonic approximation. In most cases these values were in good agreement with the experimental results for 38 observed modes of the gauche and 8 modes of the syn conformer with a deviation of ca. 1%.     

Li and Li MAS NMR Studies on Fast Ionic Conducting Spinel-Type Li2MgCl4, Li2-xCuxMgCl4, Li2-xNaxMgCl4, and Li2ZnCl4

⁶Li and ⁷Li MAS NMR spectra including 1D-EXSY (exchange spectroscopy) and inversion recovery experiments of fast ionic conducting Li₂MgCl₄, Li_2-xCu_xMgCl₄, Li_2-xNa_xMgCl₄, and Li₂ZnCl₄ have been recorded and discussed with respect to the dynamics and local structure of the lithium ions. The chemical shifts, intensities, and half-widths of the Li MAS NMR signals of the inverse spinel-type solid solutions Li_2-xM^I_xMgCl₄ (M^I=Cu, Na) with the copper ions solely at tetrahedral sites and sodium ions at octahedral sites and the normal spinel-type zinc compound, respectively, confirm the assignment of the low-field signal to Li^tet of inverse spinel-type Li₂MgCl₄ and the high-field signal to Lioct as proposed by Nagel et al. (2000). In contrast to spinel-type Li_2-2xMg_1+xCl₄ solid solutions with clustering of the vacancies and Mg²⁺ ions, the Cu⁺ and Na⁺ ions are randomly distributed on the tetrahedral and octahedral sites, respectively. The activation energies due to the various dynamic processes of the lithium ions in inverse spinel-type chlorides obtained by the NMR experiments are E_a=6.6-6.9 and ΔG^*>79 KJ mol⁻¹ (in addition to 23, 29, and 75 kJmol-1 obtained by other techniques), respectively. The largest activation energy of >79 KJ mol⁻¹ corresponds to hopping exchange processes of Li ions between the tetrahedral 8a sites and the octahedral 16d sites. The smallest value of 6.6-6.9 KJ mol⁻¹, which was derived from the temperature dependence of both the spin-lattice relaxation times T₁ and the correlation times τ_C of Li^tet, reveals a dynamic process for the Li^tet ions inside the tetrahedral voids of the structure, probably between fourfold 32e split sites around the tetrahedral 8a site.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Synthesis and nonlinear optical properties of BaTi(BO3)2 and Ba3Ti3O6(BO3)2 crystals in glasses with high TiO2 contents

The ternary BaO-TiO₂-B₂O₃ glasses containing a large amount of TiO₂ (20-40 mol%) are prepared, and their optical basicities (Λ), the formation, structural features and second-order optical nonlinearities of BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are examined to develop new nonlinear optical materials. It is found that the glasses with high TiO₂ contents of 30-40 mol% show large optical basicities of Λ=0.81-0.87, suggesting the high polarizabity of TiO_n polyhedra (n=4-6) in the glasses. BaTi(BO₃)₂ and Ba₃Ti₃O₆(BO₃)₂ crystals are found to be formed as main crystalline phases in the glasses. It is found that BaTi(BO₃)₂ crystals tend to orient at the surface of crystallized glasses. The new XRD pattern for the Ba₃Ti₃O₆(BO₃)₂ phase is proposed through Rietvelt analysis. The second harmonic intensities of crystallized glasses were found to be 0.8 times as large as α-quartz powders, i.e., I^2ω(sample)/I^2ω(α-quartz)=0.8, for the sample with BaTi(BO₃)₂ crystals and to be I^2ω(sample)/I^2ω(α-quartz)=68 for the sample with Ba₃Ti₃O₆(BO₃)₂ crystals. The Raman scattering spectra for these two crystalline phases are measured for the first time and their structural features are discussed.     

Reaction of some tertiary phosphines and phosphites with [Co(η5-C5H5)(S2C2{CN}2)]

Reaction of the 16 electron monomer [Co(η⁵-C₅H₅)(S₂C₂{CN}₂)] with various tertiary phosphines and phosphites (L) gives readily the 18 electron monomers [Co(η⁵-C₅H₅)(S₂C₂{CN}₂)L] which for L = P(OR)₃ have J($\text{P}$C₅$\text{H}$₅) ca. 6 Hz but J($\text{P}$C₅$\text{H}$₅) = 0 for L = PR₃.     

Substitution in barium-fluoride apatite: The crystal structures of Ba10(PO4)6F2, Ba6La2Na2(PO4)6F2 and Ba4Nd3Na3(PO4)6F2

The crystal structures of the apatites Ba₁₀(PO₄)₆F₂(I), Ba₆La₂Na₂(PO₄)₆F₂(II) and Ba₄Nd₃Na₃(PO₄)₆F₂ (III) have been determined by single-crystal X-ray diffraction. All three compounds crystallize in a hexagonal apatite-like structure. The unit cells and space groups are: I, a = 10.153(2), c = 7.733(1)Å, $\text{P6}{}_3\text{m}\text{; a = 9.9392(4), c = 7.4419(5)}$Å, $\text{P}\text{6}$; III, a = 9.786(2), c = 7.281(1)Å, $\text{P}\text{3}$. The structures were refined by normal full-matrix crystallographic least squares techniques. The final values of the refinement indicators R_w and R are: I, R_w = 0.026, R = 0.027, 613 observed reflections; II, R_w = 0.081, R = 0.074, 579 observed reflections; III, R_w = 0.062, R = 0.044, 1262 observed reflections.In I, the Ba(1) atoms located in columns on threefold axes, are coordinated to nine oxygen atoms; the Ba(2) sites form triangles about the F site and are coordinated to six oxygen atoms and one fluoride ion. The fluoride ions are statistically displaced ～0.25 Å from the Ba(2) triangles. This displacement of the F ions is analogous to the displacement of OH ion in Ca₁₀(PO₄)₆(OH)₂.The structures of II and III contain disordered cations. In II there is disorder between La and Na in the column cation sites as well as triangle sites. In III, Nd and Na ions are ordered in the column sites, but there is disorder among Ba and the remaining Nd and Na ions in the triangle sites to give an average site population of $\text{2}\text{3}\text{Ba}\text{,}\text{1}\text{6}\text{Nd}\text{,}\text{1}\text{6}\text{Na}$. The coordination of the rare earth ions and Na ions in the ordered column sites are nine and six oxygens, respectively, in accord with the greater charge of the rare earth ions as compared with Na. The F ions in both II and III suffer from considerable disorder in position, and their locations are not precisely known.     

Structural relationships between new carbide La14Sn(MnC6)3 and fully ordered La11(MnC6)3

Crystals of the ternary La₁₁(MnC₆)₃ and new quaternary carbide La₁₄Sn(MnC₆)₃ phases were grown from La/Ni eutectic flux and their structures were determined by means of X-ray single crystal diffraction. La₁₁(MnC₆)₃ is a new superstructure variant of La_3.67MnC₆ (previously reported disordered subcell: P6₃/m; a₀=8.806 Å; c₀=5.329 Å, Z=2). The superstructure (R3¯; a=√3a₀=15.2649(9) Å; c=3c₀=16.013(1) Å, Z=6; R₁=0.022) is realized by complete ordering of the La chains within the columns of face-sharing carbon octahedra, with alternating La-La distances leading to R-centering and enlargement of the unit cell. The structure of the quaternary carbide La₁₄Sn(MnC₆)₃ (P6¯; a=8.756(1) Å; c=10.483(2) Å, Z=1; R₁=0.026) is closely related to that of La₁₁(MnC₆)₃ with part of the MnC₆ units replaced by Sn atoms. The structure and precise composition of La₁₄Sn(MnC₆)₃ can be derived from that of La₁₁(MnC₆)₃ by taking into account the extent of this substitution and variation in lanthanum siting in the chain of carbon octahedra. Band structure calculations indicate both phases are metallic; the La₁₁(MnC₆)₃ phase is stabilized by the ordering of La atoms which induces a pseudogap at E_F.     

Syntheses, crystal structures, and properties of three new metal selenites Na2Co2(SeO3)3, Na2Co1.67Ni0.33(SeO3)3, and Na2Ni2(SeO3)3

Three new sodium cobalt (nickel) selenite compounds, namely, Na₂Co₂(SeO₃)₃, Na₂Co_1.67Ni_0.33(SeO₃)₃, and Na₂Ni₂(SeO₃)₃ have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO₃] pillared by the [SeO₃]²⁻ groups. The two different types of Na⁺ ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds.     

Hydrothermal synthesis and structures of the novel niobium phosphates [NbOF(PO4)](N2C5H7) and [(Nb0.9V1.1)O2(PO4)2(H2PO4)](N2C2H10)

Two new niobium phosphates were synthesized and their crystal structures determined from single-crystal X-ray data. [NbOF(PO₄)](N₂C₅H₇) (1) (monoclinic, space group P2₁/c, a=11.442(1), b=9.1983(7), c=9.1696(8) Å, β=109.94(1)°) has a layered structure and is the first example of a negatively charged NbOF(PO₄) layer analogous to the MO(H₂O)PO₄ (M=V, Nb) layers. The layer charge is compensated by interlayer 4-aminopyridnium cations that adopt an unusual arrangement as a consequence of H-bonding and π-π interactions. The interlayer aminopyridnium cations can be exchanged with alkylammonium ions which form bilayers inclined at ∼65° to the NbOF(PO₄) layer. [(Nb_0.9V_1.1)O₂(PO₄)₂(H₂PO₄)] (N₂C₂H₁₀) (2) (orthorhombic, space group Pbca, a=15.821(2),b=9.0295(9),c=18.301(2) Å) has a disordered three-dimensional structure based on NbO(PO₄) layers cross-linked by phosphate tetrahedra, and has a similar structure to the known vanadium analog [V₂O₂(PO₄)₂(H₂PO₄)] (N₂C₂H₁₀).     

Structure of two new borates YCa3(AlO)3(BO3)4 and YCa3(GaO)3(BO3)4

By replacing Mn in YCa₃(MnO)₃(BO₃)₄ with trivalent Al and Ga, two new borates with the compositions of YCa₃(MO)₃(BO₃)₄ (M=Al, Ga) were prepared by solid-state reaction. Structure refinements from X-ray powder diffraction data revealed that both of them are isostructural to gaudefroyite with a hexagonal space group P6₃/m. Cell parameters of a=10.38775(13)Å, c=5.69198(10)Å for the Al-containing compound and a=10.5167(3)Å, c=5.8146(2)Å for the Ga analog were obtained from the refinements. The structure is constituted of AlO₆ or GaO₆ octahedral chains interconnected by BO₃ groups in the ab plane to form a Kagomé-type lattice, leaving trigonal and apatite-like tunnels. It is found that most rare-earth and Cr, Mn ions can be substituted into the Y³⁺ and M³⁺ sites, respectively, and the preference of rare-earth ions to locate in the trigonal tunnel is correlated to the sizes of the M³⁺ ions.     

High-pressure syntheses of TaS3, NbS3, TaSe3, and NbSe3 with NbSe3-type crystal structure

Transition metal trichalcogenides TaSe₃, TaS₃, NbSe₃ and NbS₃ were prepared under the reaction conditions of 2 GPa, 700°C, 30 min. NbSe₃ is exactly the same as that obtained in the usual sealed-tube method. The other products are modifications of each usual phase. They have crystal structures very similar to that of NbSe₃. The lattice parameters are a = 10.02Å, b = 3.48 Å, c = 15.56 Å, β = 109.6° for TaSe₃, a = 9.52 Å, b = 3.35 Å, c = 14.92 Å, β = 110.0° for TaS₃, and a = 9.68 Å, b = 3.37 Å, c = 14.83 Å, β = 109.9° for NbS₃. In spite of the similarity in their crystal structures, these high-pressure phases show a variety of electrical transport properties. TaSe₃ is a superconductor having T_c at 1.9 K. TaS₃ is a semiconductor with two transitions at 200 and 250 K. NbS₃ is a semiconductor with E_a = 180 MeV.     

The distribution of nickel ions among octahedral and tetrahedral sites in NiAl2O4MgAl2O4 solid solutions

The cation distribution in NiAl₂O₄ and in the solid solutions Ni_xMg_1?xAl₂O₄ with x ranging from 0.01 to 0.55 has been studied by X-ray analysis, magnetic susceptibility and reflectance spectroscopy.The relative X-ray intensities of various reflections for each compound were measured and compared with intensities calculated for various models of cation distribution. Lattice parameters, magnetic moments of Ni²⁺, and the position of nickel absorption bands have also been measured. The results show that all specimens have a predominantly octahedral distribution for their nickel ions, and that there is a small change towards a random distribution when the quenching temperature is increased from 1273 to 1673°K.Both X-ray and magnetic results show that the fraction, α, of Ni²⁺ ions on tetrahedral sites varies with nickel content. For samples quenched from 1273°K, NiAl₂O₄ is 78% inverse, but between x = 1.0 and x = 0.25 the value of α decreases from 0.22 towards 0.1. Thus, the fraction of nickel on octahedral sites in the solid solutions is higher than in NiAl₂O₄. The effect is linked with an increase in Dq for the Ni²⁺ ion. Below x = 0.25, there is tentative evidence that α may increase. In nickel-dilute solutions the matrix as a whole is nearly normal, and it is suggested that Madelung energy may then be more effective in counteracting the octahedral stabilization of nickel. The same trend is observed in the specimens quenched from 1673°K.     

FeGa3 and RuGa3: Semiconducting Intermetallic Compounds

The intermetallic compounds FeGa₃ and RuGa₃ were prepared from the elements using a Ga flux and their structures were refined from single-crystal X-ray data. Both compounds crystallize with the FeGa₃ structure type (tetragonal, space group P4₂/mnm, Z=4). Electrical resistivity measurements revealed a semiconducting behavior for FeGa₃ and RuGa₃, which is in contrast to the good metallic conductivity observed for the isotypic compound CoGa₃. The origin of the different electronic properties of these materials was investigated by first-principle calculations. It was found that in compounds adopting the FeGa₃ structure type the transition metal atoms and Ga atoms interact strongly. This opens a d-p hybridization bandgap with a size of about 0.31 eV in the density of states at the Fermi level for 17-electron compounds (i.e., FeGa₃ and RuGa₃). The electronic structure of CoGa₃ (an 18-electron compound) displays rigid band behavior with respect to FeGa₃. As a consequence, the Fermi level in CoGa₃ becomes located above the d-p hybridization gap which explains its metallic conductivity.     

Syntheses, structures, and properties of Ag4(Mo2O5)(SeO4)2(SeO3) and Ag2(MoO3)3SeO3

Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) has been synthesized by reacting AgNO₃, MoO₃, and selenic acid under mild hydrothermal conditions. The structure of this compound consists of cis-MoO₂²⁺ molybdenyl units that are bridged to neighboring molybdenyl moieties by selenate anions and by a bridging oxo anion. These dimeric units are joined by selenite anions to yield zigzag one-dimensional chains that extended down the c-axis. Individual chains are polar with the C₂ distortion of the Mo(VI) octahedra aligning on one side of each chain. However, the overall structure is centrosymmetric because neighboring chains have opposite alignment of the C₂ distortion. Upon heating Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) looses SeO₂ in two distinct steps to yield Ag₂MoO₄. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): orthorhombic, space group Pbcm, a=5.6557(3), b=15.8904(7), c=15.7938(7) Å, V=1419.41(12), Z=4, R(F)=2.72% for 121 parameters with 1829 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ was synthesized by reacting AgNO₃ with MoO₃, SeO₂, and HF under hydrothermal conditions. The structure of Ag₂(MoO₃)₃SeO₃ consists of three crystallographically unique Mo(VI) centers that are in 2+2+2 coordination environments with two long, two intermediate, and two short bonds. These MoO₆ units are connected to form a molybdenyl ribbon that extends along the c-axis. These ribbons are further connected together through tridentate selenite anions to form two-dimensional layers in the [bc] plane. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): monoclinic, space group P2₁/n, a=7.7034(5), b=11.1485(8), c=12.7500(9) Å, β=105.018(1) V=1002.7(2), Z=4, R(F)=3.45% for 164 parameters with 2454 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ decomposes to Ag₂Mo₃O₁₀ on heating above 550 °C.     

Solid solutions of Pb8M2(XO4)6 lead alkali apatites

The Pb₈Na_2?xK_x(PO₄)₆, Pb₈Na_2?xK_x(AsO₄)₆, Pb₈Na_2?xRb_x(PO₄)₆, and Pb₈K_2?xRb_x(PO₄)₆ systems were studied. The compounds crystallize at all compositions in the P6₃m hexagonal apatite structure and form true solid solutions. The change of the lattice parameters of the composition and of the c/a values and their relation to the ionic radii of the alkali ions are discussed.     

Electrical Behavior of New Orthophosphates Na2M3(PO4)3 (M3=GaMn2, GaCd2, InMn2 and FeMnCd) with Alluaudite-Like Structure

New sodium orthophosphates of general formula Na₂M₃(PO₄)₃ belonging to the alluaudite-type structure have been synthesized and characterized by neutron and X-ray powder diffraction. The nature of the M₃ elements (M₃=GaMn₂, GaCd₂, InMn₂ and FeMnCd) was chosen in order to analyze their influence on electrical and magnetic properties. The conductivity of these materials was measured by the complex impedance method and the transport mechanism was studied from complex permittivities and modulus formalism. Electrical results including charge/discharge experiments showed two main behaviors: GaCd₂ and FeMnCd behave as purely ionic conductors whereas GaMn₂ and InMn₂ are mixed ionic-electronic conductors. The magnetic susceptibility data reveal the antiferromagnetic behavior of FeMnCd, InMn₂ and GaMn₂, with a weak ferromagnetic transition at low temperatures.     

Combinatorial topology of uranyl molybdate sheets: syntheses and crystal structures of (C6H14N2)3[(UO2)5(MoO4)8](H2O)4 and (C2H10N2)[(UO2)(MoO4)2]

Two new mixed organic-inorganic uranyl molybdates, (C₆H₁₄N₂)₃[(UO₂)₅(MoO₄)₈](H₂O)₄ (1) and (C₂H₁₀N₂)[(UO₂)(MoO₄)₂] (2), have been obtained by hydrothermal methods. The structure of 1 [triclinic, , Z=1, a=11.8557(9), b=11.8702(9), c=12.6746(9) Å, α=96.734(2)°, β=91.107(2)°, γ=110.193(2)°, V=1659.1(2) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.058, which was calculated for the 5642 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl square bipyramids, uranyl pentagonal bipyramids, and MoO₄ tetrahedra, with composition [(UO₂)₅(MoO₄)₈]⁶⁻, that are parallel to (−101). H₂O groups and 1,4-diazabicyclo [2.2.2]-octane (DABCO) molecules are located in the interlayer, where they provide linkage of the sheets. The structure of 2 [triclinic, , Z=2, a=8.4004(4), b=11.2600(5), c=13.1239(6) Å, α=86.112(1)°, β=86.434(1)°, γ=76.544(1)°, V=1203.14(10) Å] has been solved by direct methods and refined on the basis of F² for all unique reflections to R1=0.043, which was calculated for 5491 unique observed reflections (|F_o|?4σ_F). The structure contains topologically novel sheets of uranyl pentagonal bipyramids and MoO₄ tetrahedra, with composition [(UO₂)(MoO₄)₂]²⁻, that are parallel to (110). Ethylenediamine molecules are located in the interlayer, where they provide linkage of the sheets. All known topologies of uranyl molybdate sheets of corner-sharing U and Mo polyhedra can be described by their nodal representations (representations as graphs in which U and Mo polyhedra are given as black and white vertices, respectively). Each topology can be derived from a simple black-and-white graph of six-connected black vertices and three-connected white vertices by deleting some of its segments and white vertices.     

Crystallographic shear in the Nb2O5WO3 and Ta2O5WO3 systems

Crystallographic shear (CS) phases occurring in the Nb₂O₅WO₃ and Ta₂O₅WO₃ systems near to WO₃ were characterized by X-ray diffraction and high-resolution transmission electron microscopy. The Nb₂O₅WO₃ samples were heated at 1600K. They contained ordered {104} and {001} CS planes and wavy CS which were composed of intergrowths of {104} and {001} CS segments. The composition range over which the {104} CS series extended was from (Nb,W)O_2.954 i.e., (Nb,W)₆₅O₁₉₂, to (Nb,W)O_2.942, i.e., (Nb,W)₅₂O₁₅₃. The composition range over which the {001} CS series extended was from (Nb,W)O_2.9375, i.e., (Nb,W)₁₆O₄₇ to (Nb,W)O_2.875, i.e., (Nb,W)₈O₂₃. The Ta₂O₅WO₃ samples were prepared at 1593, 1623, and 1672K. At lower temperatures ordered {103} CS phases were found, with a composition range extending between (Ta,W)O_2.960, i.e., (Ta,W)₅₀O₁₄₈, to (Ta,W)O_2.944, i.e., (Ta,W)₃₆O₁₀₆. At 1673K ordered {103} CS phases occurred, as did wavy CS composed of intergrowths of {103} and {104} CS segments.