Cationoid rearrangements in reactions of perfluoro-1-arylbenzocyclobutenes with antimony pentafluoride

In the presence of antimony pentafluoride at 130 °C, the four-membered ring of perfluoro-1-(2-ethylphenyl)benzocyclobutene (2) undergoes cleavage, forming perfluoro-2-ethyl-2′-methyldiphenylmethane (5). Compound 5 is converted, under the action of SbF₅ at 170 °C, to perfluoro-8,9-dimethyl-1,2,3,4-tetrahydrofluorene (8). Perfluoro-1-(4-ethylphenyl)benzocyclobutene (3) remains unchanged at 130 °C, whereas at 170 °C it gives a mixture of perfluorinated 4′-ethyl-2-methyldiphenylmethane (9), 6-ethyl-1,2,3,4-tetrahydroanthracene (11) and 2-ethyl-9,10-dihydroanthracene (12). When heated with SbF₅ at 170 °C, perfluoro-1-phenylbenzocyclobutene (1) remains unchanged. Solution of compounds 2, 3, 5 and 9 in SbF₅-SO₂ClF generated the perfluorinated 1-(2-ethylphenyl)-1-benzocyclobutenyl (29), 1-(4-ethylphenyl)-1-benzocyclobutenyl (30), 2-ethyl-2′-methyldiphenylmethyl (31) and 4′-ethyl-2-methyldiphenylmethyl (32) cations, respectively.     

An efficient preparation and spectroscopic and electrochemical properties of quinodimethane derivatives with four 3-(methoxycarbonyl)azulen-1-yl groups

Reaction of methyl 1-azulenecarboxylate (8) with terephthalaldehyde (9) in acetic acid in the presence of hydrochloric acid at 25 °C for 2 h gives 1,4-bis[bis(3-methoxycarbonyl-1-azulenyl)methyl]benzene (12), in 93% yield, which upon oxidation with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) in dichloromethane in the presence of hexafluorophosphoric acid at 25 °C for 1 h affords the dicarbenium-ion compound 15 in 94% yield. Furthermore, reduction of 15 with zinc powder in a mixed solvent of acetonitrile and chloroform at 25 °C for 1 h yields the target quinodimethane 18 in 90% yield. Similarly, as in the case of 18, the quinoid compounds 19 and 20 can be derived from the dicarbenium-ion compounds 16 and 17, quantitatively. A facile preparation as well as spectroscopic and electrochemical properties of 15-20 is reported.     

Oxygen replacement by fluorine in carbonyl derivatives of perfluoroaromatic compounds and isomerization of perfluoroindan-1,3-dione to perfluoro-3-methylenephthalide under the action of HF/SbF5

When acted upon by HF/SbF₅ at 95 °C, carbonyl groups of perfluorinated acetophenone (10), 3,4-dihydronaphthalen-1(2H)-one (8), 2,3-dihydronaphthalene-1,4-dione (9), benzocyclobutenone (6), benzocyclobutenedione (7) and indan-1-one (1) are converted into difluoromethylene groups to give the corresponding perfluoroaromatic products. Perfluoroindan-2-one (5), under the same conditions, is transformed to bis(perfluoroindan-2-yl) ether (21). On heating with HF/SbF₅, perfluoroindan-1,3-dione (2) isomerizes into perfluoro-3-methylenephthalide (4) at 95 °C, and gives 4,5,6,7-tetrafluoro-3-trifluoromethyl-phthalide (14) at 130 °C. Compound 4 in the absence of a solvent dimerizes giving perfluorodispiro[phthalide-3,1′-cyclobutane-2′,3″-phthalide] (18), and when heated with SbF₅ at 130 °C, it is converted into perfluoro-3-methylphthalide (3). When acted upon by HF/SbF₅ at 95 °C, perfluorinated benzoic acid (12) and phthalic anhydride (13) give the corresponding products with trifluoromethyl groups.     

Novel and efficient approach to (Z)-4-trifluoroethylidene-1,3-dioxolane derivatives via (trifluoromethyl)ethynylation of ketones and aldehydes

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolanes 2a-p were prepared in quantitative yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with TBAF at −15 °C for 10 min, followed by treatment with phenyl perfluoroalkylated ketones at room temperature. The use of aldehydes under the same reaction condition afforded 1,3-dioxolanes 2q-r in good yields. The reaction of 1a with TBAF, followed by treatment with aldehydes or ketones at −15 °C for 10 min and then with trifluoroacetophenone at room temperature provided 1,3-dioxolane derivatives 2s-t in good yields. Tetrabutylammonium trifluoropropynylide [II] was treated with benzaldehyde derivatives at −15 °C for 10 min, followed by treatment with trifluoroacetophenone, to give the corresponding 1,3-dioxolanes 2u-z and 1,3-dioxines 3u-z with different reaction condition.     

Formation and skeletal transformations of perfluoroindan-1-one and perfluoroindan-1,3-dione in the reaction of perfluoroindan with SiO2/SbF5

Perfluoroindan-1-one (2) is obtained in the reaction of perfluoroindan (1) with SiO₂/SbF₅ at 70 °C. Compound 1 heated with SiO₂/SbF₅ at 130 °C and then treated with water, gives 3-hydroxy-perfluoro-3-methylphthalide (4). Ketone 2 is converted, under the action of SbF₅ at 130 °C, to perfluoro-2-ethylbenzoic acid (9) and disproportionates to compound 1 and perfluoroindan-1,3-dione (3); the latter is transformed to phthalide 4 under the reaction conditions.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

A flow chemistry route to 2-phenyl-3-(1H-pyrrol-2-yl)propan-1-amines

The Knoevenagel condensation of pyrrole-2-carboxaldehyde (1) with a range of substituted benzyl nitriles (2a-e) afforded rapid access to a family of α,β-unsaturated nitriles (3a-e) in good yields (67-78%). Flow hydrogenation (ThalesNano H-cube™) at 60 °C, 50 bar H₂ pressure, 1.0 mL/min through a 10% Pd-C catalyst selectively, and quantitatively, hydrogenated the olefin double bond (4a-e). Use of a Raney Nickel catalyst at 70 °C, 70 bar H₂ pressure and flow rates of 0.5-1.0 mL/min afforded quantitative conversion into the corresponding saturated amines with the reduction of both the olefin and nitrile bonds (5a-e). The versatility of this approach was further exemplified by reaction of 5a and 5c with norcantharidin to afford acid amide norcantharidin analogues 7 and 8 as novel protein phosphatase 1 and 2A inhibitors.     

Self-assembly and aggregation of ATRP prepared amphiphilic BAB tri-block copolymers contained nonionic ethylene glycol and fluorescent 9,10-di(1-naphthalenyl)-2-vinyl-anthracene/1-vinyl-pyrene segments

Two novel amphiphilic BAB-type block copolymers, ADN-PEG3400-ADN and Py-PEG3400-Py containing deep blue and bluish-green fluorescent moieties were prepared using atom transfer radical polymerization (ATRP) (where, ADN = poly(9,10-di(1-naphthalenyl)-2-vinylanthracene), Py = poly(1-vinyl pyrene) and PEG3400 = poly(ethylene glycol) with M_n = 3400 g/mol). The GPC number averaged molecular weights (MW) of the block copolymers were M_n = 9600 and 13,800 g/mol, respectively, based on polystyrene MW standards. The PEG3400 segment has a melting temperature (T_m peak) at 64–65 °C, whereas the glass transition temperatures (T_g midpoint) of the ADN and Py segments were found to be 230 °C and 193 °C, respectively, and are similar to their respective homopolymers indicating complete microphase segregration. The photoluminescence (PL) emission of the copolymers ADN-PEG3400-ADN exhibited two maxima at 423.5 nm and 441.5 nm while Py-PEG3400-Py has a maximum at 488.5 nm. Both copolymers form individual spherical micelles with diameter from 30 to 90 nm for Py-PEG3400-Py and 40–160 nm for ADN-PEG3400-ADN. The micelles, however, transform into cross-linked pearl-necklace-like aggregates at polymer concentrations above 1000 ppm, which may be attributed to the physical cross-linking between adjacent spherical micelles caused by the PEG3400 segments.     

Electrophilic aromatic addition reaction (AdEAr) to anthracene

After finding in a previous study that naphthalene and quinoline can react via electrophilic aromatic addition reaction (Ad_EAr), we applied this to anthracene. When anthracene was reacted with bromine in methanol in the presence of NaHCO₃ and pyridine, 9,10-dihydro-9,10-dimethoxyanthracene (2) was obtained in 82% yield in the absence of substitution products or oxidative demethylation products like anthraquinone. The same reaction in ethanol produced 9,10-diethoxy-9,10-dihydroanthracene (9) in much lower yield (45%). In addition, we investigated the reactivity of addition product 2. Treatment of 2 with DDQ in benzene at 65 °C for 12 h produced 9,10-dimethoxyanthracene (3) in 62% yield, and 2 was rapidly transformed to 9-methoxyanthracene (4) in methanolic NaOH in 10 min. Moreover, the acid-catalyzed aromatization of 2 in 1-propanol at 75 °C for 10 min gave 9-n-propoxyanthracene (8) in 65% yield.     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(L-L)(NCBH3) (M = Mo, W; L-L = dppe, bipy, en)

Compounds M(CO)₂(η³-C₃H₅)(L-L)(NCBH₃) (L-L = dppe, M = Mo(1), W(2); L-L = bipy, M = Mo(3), W(4); L-L = en, M = Mo(5), W(6)) were prepared and characterized. The single crystal X-ray analyses of 2-6 revealed that the cyanotrihydroborate anion bonds to the metal through a nitrogen atom, the open face of the allyl group being pointed toward the two carbonyls (endo-isomer). In compounds 2, 5, and 6, the two donor atoms of the bidentate ligand occupy equatorial and axial positions, respectively. In the solid state structures of compounds 3 and 4 both nitrogen atoms of the bipy ligand occupy equatorial positions. The NMR spectroscopy reveals a fluxional behavior of compounds 1, 2, 5, and 6 in solution. Although the fluxional behavior of compounds 5 and 6 ceased at about −40 °C, that of compound 1 could not be stopped even at −90 °C. Their low temperature conformations are consistent with their solid state structures. Both the endo- and exo-isomers coexist in solution for compounds 3 and 4.     

Cyclopolymerization XXXIII. Radical polymerizations and copolymerizations of 1,6-dienes with 2-phenylallyl group and thermal properties of polymers derived therefrom

Radical polymerizations of α-allyloxymethylstyrene (1) and copolymerizations of α-(2-phenylallyloxy)methylstyrene (2) were undertaken to acquire comprehensive understanding on polymerization behavior of these dienes and to get polymers with high thermal stability and high glass transition temperature (T_g). One of the monofunctional counterparts of 1 is a derivative of α-methylstyrene, the ceiling temperature of which is low, and the other is an allyl compound that is well-known for the low homopolymerization tendency. This means that the intermolecular propagation reactions leading to pendant uncyclized units are suppressed during the polymerization of 1 to yield highly cyclized polymers. In fact, the degree of cyclization of poly(1) obtained at 140 °C attained the value 92%. Structural studies revealed that repeat cyclic units of poly(1) consist exclusively of five-membered rings. Poly(1) was found to be stable up to 300 °C, but its T_g values were detected at around 100 °C. They are considerably lower than the targeted values which should lie between 180 and 220 °C. An additional drawback of poly(1) is its low molecular weight probably due to a degradative chain transfer. For this reason, copolymerizations of 2 with 1 and with styrene were also carried out to seek for the possibility to control the thermal properties precisely. Monomer 2 was chosen, since it has been reported in our previous work that it yields polymers with thermal stability up to 300 °C and T_g higher than 250 °C. Copolymerization of 2 with styrene afforded polymers with desired thermal properties and high molecular weight.     

Cyclopropylmethyl- and cyclobutylmethyllithium by an arene-catalyzed lithiation. Stability and reactivity

The reaction of (chloromethyl)cyclopropane 5 and (bromomethyl)cyclobutane 8 with lithium and a substoichiometric amount of DTBB, in the presence of different carbonyl compounds as electrophiles, in THF at −78 °C leads, after hydrolysis, to the corresponding cycloalkyl alcohols 6 and 9, respectively. However, when the same starting materials are lithiated using naphthalene as catalyst in diethyl ether and at higher temperature (0 or 25 °C), and then react with the same electrophiles, the final hydrolysis yields the corresponding unsaturated alcohols 7 and 10, respectively.     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

Preparation and nonlinear optical properties of novel Y-type polyesters with highly enhanced thermal stability of second harmonic generation

3,4-Di-(2′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters (4-5) containing 3,4-dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer main-chains. The resulting polymers 4-5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 89-91 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 2.47 pm/V. The dipole alignment exhibited high thermal stability even at 10 °C higher than T_g, and there is no SHG decay below 100 °C due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.     

Colorless poly(ether-imide)s deriving from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A series of poly(ether-imide)s (III) characterized by colorless, highly solubility was synthesized from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and various fluorinated aromatic diamines (I_a-h) in DMAc via polycondensation to form poly(amic acid) (II), followed by chemical (C) and thermal (H) imidization. These polymers had inherent viscosities ranging from 0.60 to 1.3 dL/g. These polyimides were highly soluble in a variety of organic solvent such as amide-type, ether-type and chlorinated solvents. Moreover, these poly(ether-imide) films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 390 nm and low b* value (a yellowness index) of 4.6-18.0. The III series showed strength tensile of 72-101 MPa, elongation at break of 11-25%, initial modulus of 1.5-2.0 GPa. The glass transition temperature (T_g) of III_a-h were in the range of 202-267 °C, and the decomposition temperature above 493 °C and left 40-65% char yield at 800 °C in nitrogen. They had the lower dielectric constants of 3.39-3.72 (1 MHz) and moisture absorptions in the range of 0.11-0.40%.     

Trimethylaluminium-induced diastereoselective methylation onto ethyl 2-oxocyclopentane-1-carboxylate and isomerization between the dimethylaluminium-alkoxide products

Methylation of α-disubstituted cyclopentanone 1 with Me₃Al in CH₂Cl₂ at 0 °C for 30 min gave diastereoselectively a mixture of (1R*,2S*)-2 and (1R*,2R*)-2 in a 96:4 ratio and 83% total yield. When the same methylation was carried out at 0 °C for 1 h and then at room temperature for 120 h, a diastereomeric mixture of (1R*,2S*)-2 and (1R*,2R*)-2 was obtained in a 12:88 ratio and in 88% total yield. The stereochemistry of the two diastereomers was determined by the results of acetalization of their diol derivatives 3 and 5. Isomerization between the Me₂Al-alkoxides of (1R*,2S*)-2 and (1R*,2R*)-2 and its possible mechanism were investigated by HPLC analysis of the methylation reaction process at 0 °C for 1 h and then at room temperature for 56 h and also by their mutual epimerization reactions.     

The alicyclic ring contraction of perfluoro-1-phenyltetralin in reaction with antimony pentafluoride

Perfluoro-1-phenyltetralin (1) heated with antimony pentafluoride at 130 °C, then treated with water, gave a mixture of perfluorinated 3-methyl-2-phenylindenone (3), 3-methyl-2-phenylindene (4), 3-hydroxy-1-methyl-3-phenylindan (5), 1-methyl-3-phenylindan (6), 9-methyl-1,2,3,4,5,6,7,8-octahydroanthracene (7), and 1,9-dimethyl-5,6,7,8-tetrahydro-β-naphthindan (8). When heated with SbF₅ in the presence of HF, then treated with water, compound 1 is transformed to a mixture of products 3-6. The reaction at 170 and 200 °C forms compounds 3-6 together with perfluoro-2-(cyclohexen-1-yl)-3-methylindene (10).     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.