Sensitive and rapid detection of endogenous hydrogen sulfide distributing in different mouse viscera via a two-photon fluorescent probe

Development of efficient methods for detection of endogenous H₂S in living cells and tissues is of considerable signi?cance for better understanding the biological and pathological functions of H₂S. Two-photon (TP) fluorescent probes are favorable as powerful molecular tools for studying physiological process due to its non-invasiveness, high spatiotemporal resolution and deep-tissues imaging. Up to date, several TP probes for intracellular H₂S imaging have been designed, but real-time imaging of endogenous H₂S-related biological processes in tissues is hampered due to low sensitivity, long response time and interference from other biothiols. To address this issue, we herein report a novel two-photon fluorescent probe (TPP-H₂S) for highly sensitive and fast monitoring and imaging H₂S levels in living cells and tissues. In the presence of H₂S, it exhibits obviously improved sensitivity (LOD: 0.12 μM) and fast response time (about 2 min) compared with the reported two-photon H₂S probes. With two-photon excitation, TPP-H₂S displays high signal-to-noise ratio and sensitivity even no interference in cell growth media. As further application, TPP-H₂S is applied for fast imaging of H₂S in living cells and different fresh tissues by two-photon confocal microscope. Most importantly we first measured the endogenous H₂S level in different viscera by vivisection and found that the distribution of endogenous H₂S mostly in brain, liver and lung. The excellent sensing properties of TPP-H₂S make it a practically useful tool for further studying biological roles of H₂S.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

A logic gate-based fluorogenic probe for Hg detection and its applications in cellular imaging

A new colorimetric and fluorogenic probe (RN₃) based on rhodamine-B has been successfully designed and synthesized. It displays a selective response to Hg²⁺ in the aqueous buffer solution over the other competing metals. Upon addition of Hg²⁺, the solution of RN₃ exhibits a ‘naked eye’ observable color change from colorless to red and an intensive fluorescence with about 105-fold enhancement. The changes in the color and fluorescence are ascribed to the ring-opening of spirolactam in rhodamine fluorophore, which is induced by a binding of the constructed receptor to Hg²⁺ with the association and dissociation constants of 0.22 × 10⁵ M⁻¹ and 25.2 μM, respectively. The Job's plot experiment determines a 1:1 binding stoichiometry between RN₃ and Hg²⁺. The resultant “turn-on” fluorescence in buffer solution, allows the application of a method to determine Hg²⁺ levels in the range of 4.0–15.0 μM, with the limit of detection (LOD) calculated at 60.7 nM (3σ/slope). In addition, the fluorescence ‘turn-off’ and color ‘fading-out’ happen to the mixture of RN₃-Hg²⁺ by further addition of I⁻ or S²⁻. The reversible switching cycles of fluorescence intensity upon alternate additions of Hg²⁺ and S²⁻ demonstrate that RN₃ can perform as an INHIBIT logic gate. Furthermore, the potential of RN₃ as a fluorescent probe has been demonstrated for cellular imaging.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Syntheses of a stable tristibine and of related antimony compounds with the 2,6-dimesitylphenyl (Dmp) substituent

DmpSbBr₂ (Dmp = 2,6-Mes₂C₆H₃) (1) is obtained by the reaction of DmpMgBr with SbCl₃. The reaction of 1 with KI in ethanol gives DmpSbI₂ (2). Dmp(Ph)SbBr (3) is prepared from DmpMgBr and PhSbCl₂. Compound 1 or 3 react with LiAlH₄ to form DmpSbH₂ (4) or Dmp(Ph)SbH (5). Compound 4 reacts with MeI in presence of DBU to give Dmp(Me)SbH (6). DmpSb(SbMe₂)₂ (7) is obtained from 4 and Me₄Sb₂. Elimination of hydrogen from 6 gives [Dmp(Me)Sb]₂ (8). Hydrolysis of 3 gives Dmp(Ph)SbOH (9). The molecular structures of 1-3, 5, 8 and 9 were determined by X-ray diffraction on single crystals.     

Synthesis of C60 derivatives for photoaffinity labeling

In order to study the interaction of fullerenes with biological molecules, a novel photoaffinity labeling agent derived from C₆₀ was designed and synthesized. As photosensitive functional groups, azide group, and aziridine group are utilized. A convenient synthetic route via fulleropyrrolidine 2 was employed to obtain compounds labeling agents 5 and 9.     

A one-pot, two step synthesis of 2,2-disubstituted 1-nitroalkenes

The reactions of ketones 1a-o, nitromethane 2, and a stoichiometric amount of piperidine 3a or ethylenediamine 3b in the presence of mercaptan 6a in THF or CH₃CN solution give high yields of β-nitrosulfides 7a-o. The latter can be oxidized by 8a (m-CPBA or m-CPBA/AcOH) at 0°C, 8b (H₂O₂/AcOH), or 8c (H₂O₂) at room temperature, thus generating β-nitroalkylsulfoxides 9a-o, which then undergo elimination to produce medium to high yields of 2,2-disubstituted-1-nitroalkenes 5a-o, when refluxed in a solution of ClCH₂CH₂Cl (1,2-dichloroethane). After preparation from 1a-o, 2, 3, and 6a, 7a-o were oxidized with 8a, 8b, or 8c in a mixture of CH₃CN and ClCH₂CH₂Cl to generate β-nitrosulfoxides 9a-o, which then underwent elimination under refluxing under one-pot conditions. Compounds 14 and 15g were also prepared using 13, 2, 3b, and 6, in a similar manner.     

Three new sulfur-containing alkaloids, polycarpaurines A, B, and C, from an Indonesian ascidian Polycarpa aurata

Three new sulfur-containing alkaloids, polycarpaurines A (1), B (2), and C (3) were isolated from the tropical ascidian Polycarpa aurata collected in Indonesia, together with six known compounds (4-9). The structures of new compounds were assigned on the basis of their spectral data. Compounds 1, 3, 4, and 8 inhibited colony formation of Chinese hamster V79 cells with EC₅₀ values of 6.8, 8.6, 3.8, and 10 μM, respectively. Compounds 2 and 7 showed modest activity against V79 cells (EC₅₀>10 μM).     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Triphenyl lead, tin and germanium coordination compounds derived from 9H-3-thia-1,4a,9-triaza-fluorene-2,4-dithione

Reactions of potassium 4-thioxo-3-thia-1,4a,9-triaza-fluorene-2-thiolate with Ph₃PbCl, Ph₃SnCl and Ph₃GeCl provided the corresponding metal pentacoordinated compounds 2-4. Addition of THF afforded their hexacoordinated derivatives (5-7). Adducts of 2 and 3 with DMSO (8, 10), pyridine (9, 11), Ph₃PO (12, 14) CH₃OH (13, 15), respectively were synthesized. Compound 2 afforded the H₂O adduct (16). In all cases the metal atom is chelated by the ligand through a covalent bond with S2 and a coordination bond with N1 forming four membered rings. Compounds were identified by ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn and ²⁰⁷Pb. X-ray diffraction structures of 2, 3, 8, 9, 11, 14 and 16 were obtained.     

A facile approach for the synthesis of novel substituted 4H-chromenes and condensation reactions of 4H-chromenes leading to chromenopyrrolones and triazolylchromenopyrrolones

A facile method has been developed for the synthesis of 4H-chromene-3-carboxylates 3a–d by the nucleophilic substitution reaction of 2-hydroxy-2H-chromene-3-carboxylates 2a–d with triethylsilane in the presence of BF₃·O(C₂H₅)₂. Cyclocondensation of 4H-chromene-3-carboxylates 3a–d with benzylamines 4a–d afforded a series of 2,3-dihydrochromenopyrrolones 5a–p and with propargylamine afforded 2-propynyl-2,3-dihydrochromenopyrrolones 6a–d. Click reaction of 6a–d with benzyl azides 7a–d provided a series of 1H-1,2,3-triazolylmethyl-2,3-dihydrochromenopyrrolones 8a–p. Thus synthesized compounds 3a–d, 5a–p, 6a–d, and 8a–p are novel heterocyclic compounds and being reported for the first time.     

Metal-organic coordination architectures of azole heterocycle ligands bearing acetic acid groups: Synthesis, structure and magnetic properties

Four new coordination complexes with azole heterocycle ligands bearing acetic acid groups, [Co(L¹)₂]_n (1), [CuL¹N₃]_n (2), [Cu(L²)₂·0.5C₂H₅OH·H₂O]_n (3) and [Co(L²)₂]_n (4) (here, HL¹=1H-imidazole-1-yl-acetic acid, HL²=1H-benzimidazole-1-yl-acetic acid) have been synthesized and structurally characterized. Single-crystal structure analysis shows that 3 and 4 are 2D complexes with 4⁴-sql topologies, while another 2D complex 1 has a (4³)₂(4⁶)-kgd topology. And 2 is a 3D complex composed dinuclear μ_1,1-bridging azido Cu^II entities with distorted rutile topology. The magnetic properties of 1 and 2 have been studied.     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

Intramolecular rearrangement of organosilyl groups between oxygen and nitrogen in aminosiloxanes - a joint experimental-theoretical study, part II

Lithium amino-di-tert-butylsilanolate reacts with halosilanes to give 1-silylamino-1,3-siloxanes (1-7). The tetrakis(1-silylamino)siloxane thermally condenses yielding a spirocyclic six-membered ring (8). One six-membered ring of 8 forms a boat and the other has a twist conformation. Lithium salts of amino-disiloxanes form silylamino-silanolates or amido-disiloxanes. The first includes a 1,3-silyl group migration from the oxygen to the nitrogen atom. The energies of the isomeric lithium salts of model compounds are calculated and show that the lithium-trimethylsilylamino-dimethylsilanolate III is 0.7 kcal/mol more stable than the isomeric lithium-1,3-disiloxaneamide V. Experiments show that the lithium salts of amino-1,3-disiloxanes, (Me₃C)₂SiNH₂-O-R (R = SiMe₃, SiMe₂Ph, SiF₂CMe₃) reacts with ClSiMe₃, FSiMe₂Ph or F₃SiCMe₃ under a 1,3-O-N-silyl group migration to give the 1-silylamino-1,3-disiloxanes 9-11. If the trimethylsilyl group is substituted by SiMeF₂, the difference between the isomers III′ and V′ is even smaller, 0.12 kcal/mol, and the barrier to reaction via the dyotropic transition state is calculated to be 10.1 kcal/mol. Interestingly, the fluorine atoms allow for two other isomers VI and VIII which are even lower in energy. The low difference in the energies of III and V respectively VI and VIII explains that in absence of steric and/or electronic restraints the lithium salts of amino-1,3-disiloxanes react halosilanes to give both isomeric silylamino-1,3-disiloxanes, e. g. the lithiated (Me₃C)₂SiNH₂-O-SiF₂CMe₃ reacts with F₂SiMe₂ or F₃SiPh to give the structural isomers 12, 13, and 14, 15.The silyl group migration can be prevented kinetically, e. g. the lithium salts of (Me₃C)₂SiNH₂-O-R (R = SiF(N(CHMe₂)₂)₂, SiH(CMe₃)₂) react with F₂SiMe₂ or F₂Si(CMe₃)₂ to 16 and 17. A thermodynamically prevented rearrangement is observed in the reaction of lithiated (Me₃C)₂SiNH₂-O-SiMe₃ with F₃SiR (R = CMe₃ (18), Ph (19), N(SiMe₃)₂ (20), C₆H₂ (CMe₃)₃ (21). 18-21 ((Me₃C)₂SiNHSiF₂R)-O-SiMe₃) are formed.LiF-elimination from (Me₃C)₂SiNHLiO-SiF₂Me leads to the formation of the eight-membered (SiOSiN)-ring 22. The most stable lithium salts of 1-silylamino-1,3-disiloxanes form amides. This explains that in further reactions with halosilanes, the new ligand is bonded with the nitrogen atom (28-30). In results of crystal structure determinations new lithium-1-fluorosilylamino-1,3-disiloxanes of 20, (21, 23-25) are presented. 23 crystallizes as tricyclic, 24 as an unknown pentacyclic, and 25, as monomeric compound. In 25 the shortest Si-N bond length (157.9 pm) with four coordinate silicon is found. Lithium salts of 1-fluorosilylamido-1,3-disiloxanes lose thermally LiF with formation of siloxane substituted cyclodisilazanes, 26 and 27. Crystal structures of 4, 8, 17, 20, 21, 22, 23, 24, 25, 26, 28 are presented.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

α-Telluration of 2,4,6-trimethylacetophenone under mild conditions: Role of steric factor in the solid state structures of Te(II and IV) compounds

Elemental tellurium inserts into the C_sp3-Br bond of α-bromomesitylmethyl ketone and due to its strong carbophilic character affords the crystalline C-tellurated derivative of 2,4,6-trimethylacetophenone, (MesCOCH₂)₂TeBr₂, 1b in over 80% yield. Electrophilic substitution of the parent ketone with aryltellurium trichlorides, at room temperature, gives nearly quantitative yields of unsymmetrical alkylaryltellurium dichlorides (MesCOCH₂)ArTeCl₂ (Ar = mesityl, Mes, 2a; 1-naphthyl, Np, 3a; anisyl, Ans, 4a). Fairly stable mesitoylmethyltellurium(II) derivatives, (MesCOCH₂)₂Te, 1 and (MesCOCH₂)ArTe (Ar = Mes, 2; Np, 3 and Ans, 4) obtained as the reduction products of their dihalotellurium(IV) analogues, readily undergo oxidative addition of dihalogens to afford the corresponding (MesCOCH₂)₂TeX₂ (X = Cl, 1a; Br 1b; I, 1c) and (MesCOCH₂)ArTeX₂ (X = Cl, Br, I, Ar = Mes, 2a, 2b, 2c; Np, 3a, 3b, 3c and Ans, 4a, 4b, 4c). Crystallographic structural characterization of 1, 1b, 2, 2a, 2b, 2c, 3, 3a and 4c illustrates that the steric demand of mesityl group appreciably influences primary geometry around the 5-coordinate Te(IV) atom when it is bound directly to it. It also makes the Te atom inaccessible for the ubiquitous Te?X intermolecular secondary bonding interactions that result in supramolecular structures. In the crystal lattice of symmetrical telluroether 1, an interesting supramolecular synthon based upon reciprocatory weak C-H?O H-bonding interaction gives rise to chains via self-assembly.     

Addition of 2-tert-butyldimethylsilyloxythiophene to activated quinones: an approach to thia analogues of kalafungin

The uncatalyzed reaction of 2-tert-butyldimethylsilyloxythiophene 2 with 1,4-quinones bearing either an electron withdrawing acetyl or a carbomethoxy group at C-2, was investigated. No reaction was observed using 1,4-quinones 8 and 9 bearing an ester group at C-2 whereas use of 1,4-quinones 10 and 11 bearing an acetyl group at C-2 only provided low yields of the silyloxythiophenes 15 and 16 resulting from electrophilic substitution of the silyloxythiophene by the 1,4-quinone. Use of the Lewis acids InCl₃, Cu(OTf)₂ and BF₃·Et₂O were investigated in an effort to improve the yield of the desired annulation reaction. BF₃·Et₂O proved to be the optimum catalyst for the synthesis of thiolactone naphthofuran adducts 14 and 18 from 1,4-naphthoquinones 9 and 11, respectively. Reaction of 2-tert-butyldimethylsilyloxythiophene 2 with 1,4-benzoquinones 8 and 10 bearing a carbomethoxy or an acetyl group at C-2, respectively, afforded thiolactone benzofuran adducts 13 and 17, respectively, catalyzed by either InCl₃ or Cu(OTf)₂. Addition of 2-tert-butyldimethylsilyloxythiophene 2 to 3-acetyl-5-methoxy-1,4-naphthoquinone 12 afforded adduct 19 that underwent oxidative rearrangement to thiolactone pyranonaphthoquinone 20 using ceric ammonium nitrate in acetonitrile, thus providing a novel approach for the synthesis of a thia analogue of the pyranonaphthoquinone antibiotic kalafungin.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Aluminum and zinc complexes supported by functionalized phenolate ligands: Synthesis, characterization and catalysis in the ring-opening polymerization of ε-caprolactone and rac-lactide

A series of aluminum and zinc complexes supported by functionalized phenolate ligands were synthesized and characterized. Reaction of 2-(3,5-R₂C₃N₂)C₆H₄NH₂ (R = Me, Ph) with salicylaldehyde or 3,5-di-tert-butylsalicylaldehyde afforded 2-((2-(1H-pyrazol-1-yl)phenylimino)methyl)phenol derivatives 2a-2d. Treatment of 2a-2d with an equiv. of AlR²₃ (R² = Me, Et) gave corresponding aluminum aryloxides 3a-3e, while reaction with an equiv. of ZnEt₂ afforded zinc aryloxides 4a-4d. Treatment of 2c with 0.5 equiv. of ZnEt₂ formed diphenolato zinc complex 5. All new compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses. The structures of complexes 3a, 4a and 5 were further characterized by single crystal X-ray diffraction techniques. The catalytic activity of complexes 3-5 toward the ring-opening polymerization of ε-caprolactone was studied. The zinc complexes (4a-4d) exhibited higher catalytic activity than the aluminum complexes (3a-3e). The diphenolato zinc complex 5 showed lower catalytic activity than the ethylzinc complexes 4a-4d. The aluminum complex (3b) is inactive to initiate the ROP of rac-lactide, while the zinc complex (4d) is active initiator for the ROP of rac-lactide, giving atactic polylactide.     

Amphiphilic perfluoroalkylated sulfones and sulfonate betaines

Two types of perfluoro alkyl-containing amphiphilic sulfones 7-9 and 13-15, respectively, and sulfonate betaines 23-32 were prepared using 2-[(perfluoroalkyl)methyl]oxiranes (1-3, R_F = C₄F₉, C₆F₁₃, C₈F₁₇) or 3-(perfluoroalkyl)propyl iodides (16 and 17, R_F = C₆F₁₃, C₈F₁₇) as the starting compounds. The overall yields of two-step syntheses were above 90%. The compounds 7-9 were prepared by the reaction of oxiranes 1-3 with 2-sulfanylethan-l-ol and subsequent oxidation of intermediate sulfides. Similarly, the amphiphiles 13-15 were obtained by analogous reaction of oxiranes 1-3 with thiomorpholine and subsequent oxidation of the sulfur atom in the morpholine ring. In the syntheses of betaines 23-32, the starting compounds 1-3 or 16 and 17 were first reacted with dimethylamine followed by the ring-opening reaction of the intermediate fluoroalkyl(dimethyl)amines with propane-1,3- or butane-1,4-sultones.