Unprecedented Selectivity of Ruthenium Iodide Benzylidenes in Olefin Metathesis Reactions

The development of selective olefin metathesis catalysts is crucial to achieving new synthetic pathways. Herein, we show that cis‐diiodo/sulfur‐chelated ruthenium benzylidenes do not react with strained cycloalkenes and internal olefins, but can effectively catalyze metathesis reactions of terminal dienes. Surprisingly, internal olefins may partake in olefin metathesis reactions once the ruthenium methylidene intermediate has been generated. This unexpected behavior allows the facile formation of strained cis‐cyclooctene by the RCM reaction of 1,9‐undecadiene. Moreover, cis‐1,4‐polybutadiene may be transformed into small cyclic molecules, including its smallest precursor, 1,5‐cyclooctadiene, by the use of this novel sequence. Norbornenes, including the reactive dicyclopentadiene (DCPD), remain unscathed even in the presence of terminal olefin substrates as they are too bulky to approach the diiodo ruthenium methylidene. The experimental results are accompanied by thorough DFT calculations.     

关环复分解反应(RCM)及其催化剂研究进展

综述了近年来关环复分解 (RCM )反应及其催化剂的研究进展 ,对RCM反应发展以来被广泛应用的催化剂 ,如Schrock催化剂和Grubbs催化剂等进行了归纳和总结 ,讨论了RCM反应在全合成中的应用     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Metathesis reactions in total synthesis

With the exception of palladium-catalyzed cross-couplings, no other group of reactions has had such a profound impact on the formation of carbon-carbon bonds and the art of total synthesis in the last quarter of a century than the metathesis reactions of olefins, enynes, and alkynes. Herein, we highlight a number of selected examples of total syntheses in which such processes played a crucial role and which imparted to these endeavors certain elements of novelty, elegance, and efficiency. Judging from their short but impressive history, the influence of these reactions in chemical synthesis is destined to increase.     

As low as reasonably achievable catalyst loadings in the cross metathesis of olefins with ethyl acrylate

A series of ruthenium catalysts for olefin metathesis have been screened in the cross metathesis of 1,9-decadiene with ethyl acrylate. Under optimized reaction conditions a catalyst loading of only 100 ppm in respect to double bonds was sufficient for complete conversion of the diene.     

Ring-rearrangement metathesis of 3,6-dialkoxy-3,6-dihydro-2H-pyrans

The first RCM-ROM-RCM sequence using a non-strained heterocycle as relay moiety is described. The course of the reaction strongly depends on the nature and relative configuration of the substituents in the starting trienic system. In addition, for a productive reaction to be observed, the site of initiation of the metathesis cascade is crucial. The compounds thus obtained may be useful for the synthesis of unusual polydeoxydisaccharides.     

Metathesis of a novel dienediyne system: A unique example involving the usage of in situ generated ethylene as cross-enyne metathesis partner

A unique example of sequential ring-closing metathesis and cross-enyne metathesis is reported. Here, the in situ generated ethylene by product from ring-closing metathesis is trapped by alkyne moiety. No metathesis product formation was observed with more reactive second generation catalyst in the absence of ethylene. Differential chemoselectivity with the first and second generation Grubbs’ catalyst has been observed when the reaction was performed in presence of the external source of ethylene.     

Enantioselective synthesis of cyclic allylboronates by Mo-catalyzed asymmetric ring-closing metathesis (ARCM). A one-pot protocol for net catalytic enantioselective cross metathesis

Mo-catalyzed asymmetric ring-closing metathesis (ARCM) reactions are used to synthesize cyclic allylboronates of high optical purity (89% ee to >98% ee). A one-pot procedure involving formation of allylboronates, Mo-catalyzed ARCM and functionalization of the optically enriched cyclic allylboronates constitutes net asymmetric cross metathesis (ACM). Structural modification of ARCM products include reactions with aldehydes to afford optically enriched compounds that bear quaternary carbon centers with excellent diastereoselectivity. These studies emphasize the significance of the availability of chiral Mo-based complex as a class of chiral metathesis catalysts that frequently complement one another in terms of reactivity and selectivity.     

ROM-RCM of cycloalkene-yne

Ring-opening metathesis and ring-closing metathesis (ROM-RCM) of cycloalkene-yne was demonstrated using a first- or second-generation ruthenium complex. When cycloalkenes bearing the alkyne part at the C-3 position were reacted with a first-generation ruthenium-carbene complex under an atmosphere of ethylene, ROM-RCM proceeded smoothly to give skeletal reorganized products in good yields. In this reaction, cycloalkene-ynes having terminal alkyne were suitable. On the other hand, when cycloalkenes bearing the alkyne part at the C-1 position were treated with a second-generation ruthenium-carbene complex, ROM-RCM proceeded smoothly to give bicyclic compounds and/or dimeric compounds in good yields.     

A Close-to-Aromatize Approach for the Late-Stage Functionalization through Ring Closing Metathesis

An efficient approach for the synthesis of monosubstituted aromatic compounds relying on a ring-closing metathesis followed by spontaneous 1,2-elimination is presented. The efficiency for late-stage functionalization is highlighted in various solvents (up to 920 TON). This approach is compatible with strained cycles and other multiple bonds in the substrate.     

One‐Step Ring Opening Metathesis Block‐Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one‐step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock‐like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock‐like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer‐carbene to G3 benzylidene/alkylidene transformation.     

Directed ring-closing metathesis of trienes by silyl substitution

A synthetic strategy for ‘disarming’ a terminal alkene by substitution with a bulky silyl blocking group has been developed. In a series of model studies, sequential selective ring-closing metathesis of trienes followed by selective mono-hydrogenation of the resulting diene is described. The bulky silylated alkene is activated for a subsequent cross-metathesis reaction with a range of diverse alkenes by protodesilylation.     

Concise enantioselective synthesis of (−)-lasubine II

An enantioselective synthesis of the quinolizidine alkaloid (−)-lasubine II 1 is reported. Two different pathways to the key intermediate 2 are described. The first case involving a sequence of ring rearrangement metathesis (RRM), simple functional group interconversion operations, followed by a stereoselective cross metathesis (CM) and in the second case a domino ring opening-/ring closing-/cross metathesis step is involved. In both cases, following the metathesis reactions, exclusively the E-isomer was obtained. The final cyclisation towards the quinolizidine skeleton is achieved by an intramolecular Michael reaction. This concept represents the first example of a highly stereoselective RRM-CM combination in the synthesis of a natural product.     

Selective formation of dihydropyran derivatives by a tandem domino ring-closing metathesis/cross-metathesis

A ring-closing metathesis (RCM)/cross-metathesis (CM) domino reaction has been applied to esters and unsymmetrical ether prepared from 1,5-hexadien-3-ol. For the first time, dihydropyran derivatives have been obtained via a regioselective cyclization. This reaction was performed in high yield and E stereoselectivity.     

Domino intramolecular enyne metathesis/cross metathesis approach to the xanthanolides. Enantioselective synthesis of (+)-8-epi-xanthatin

The first total synthesis of (+)-8-epi-xanthatin (1) has been achieved in 14 steps starting from the commercially available ester 24, which was converted into aldehyde 23 in six steps. An enantioselective aldol reaction of 23 gave 30, which was transformed into triflate 22 in four steps, setting the stage for a palladium-catalyzed carbonylation reaction to form acrylate 34. Compound 34 was then subjected to a deprotection/lactonization sequence to furnish enyne 21, which underwent a domino enyne ring-closing metathesis/cross metathesis process to form a seven-membered carbocycle and (E)-conjugated dienone, thereby completing the synthesis of 1. This domino ruthenium-catalyzed metathesis reaction thus serves as an efficient method to construct the core of xanthanolide and other sesquiterpene lactones.     

One-Step Ring Opening Metathesis Block-Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one-step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock-like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock-like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer-carbene to G3 benzylidene/alkylidene transformation.     

金属复分解闭环反应合成C=C键的研究进展

金属复分解反应是合成C=C键的有效方法,被广泛地用于合成各种类型的化合物,特别是碳环、杂环化合物以及天然产物的合成。本文综述了近年来金属复分解反应合成C=C键的最新研究进展。参考文献31篇。     

Well-Defined Alkyne Metathesis Catalysts: Developments and Recent Applications

Although alkyne metathesis has been known for 50 years, rapid progress in this field has mostly occurred during the last two decades. In this article, the development of several highly efficient and thoroughly studied alkyne metathesis catalysts is reviewed, which includes novel well-defined, in situ formed and heterogeneous systems. Various alkyne metathesis methodologies, including alkyne cross-metathesis (ACM), ring-closing alkyne metathesis (RCAM), cyclooligomerization, acyclic diyne metathesis polymerization (ADIMET), and ring-opening alkyne metathesis polymerization (ROAMP), are presented, and their application in natural product synthesis, materials science as well as supramolecular and polymer chemistry is discussed. Recent progress in the metathesis of diynes is also summarized, which gave rise to new methods such as ring-closing diyne metathesis (RCDM) and diyne cross-metathesis (DYCM).     

Ring-Closing Metathesis of Ene-Ynamide: Application to the Synthesis of Medium-Sized Cyclic Dienamide

Summary: Ring-closing metathesis (RCM) of ene-ynamide, which could be applied to the synthesis of various heterocycles containing 7- and 8-membered rings, was investigated. Ene-ynamides are easily synthesized by the known method. When a toluene solution of ene-ynamide was stirred in the presence of a catalytic amount of second-generation ruthenium carbene complex 1 under an ethylene atmosphere, RCM proceeded smoothly to provide a heterocyclic compound having a diene moiety in good to high yield. A substituent of the ynamide moiety affected the yield of the cyclized product.