Synthesis of chromeno[3,4-c][1,2]oxazine-N-oxides via formal [4+2] cycloaddition of 3-nitro-2-trihalomethyl-2H-chromenes with cyclohexanone and pinacolone enamines

3-Nitro-2-trichloro(trifluoro)methyl-2H-chromenes undergo a formal [4+2] cycloaddition reaction to cyclohexanone and pinacolone enamines, producing chromeno[3,4-c][1,2]benzoxazin-6-oxides with high diastereoselectivity and in good yields. In addition, some novel 2,3,4-trisubstituted chromanes were obtained. The stereochemistry of the products was established based on a 2D NOESY experiment and an X-ray diffraction study.     

[6+2]Cycloadditions catalyzed by titanium complexes

The Ziegler catalyst TiCl₄-Et₂AlCl and the arenetitanium(II) complex (η6-C₆H₆)Ti(II)(AlCl₄)₂ induce [6 + 2]cycloaddition reactions of cycloheptatriene with dienes and acetylenes. Addition to 1,3-butadiene affords 7 - endo - vinyl - bicyclo[4.2.1]nona - 2,4 - diene (main product) and bicyclo[4.4.1]- undeca - 2,4,8 - triene, a product of [6+4]cycloaddition. Isoprene reacts similarly, yielding mainly 7- endo - isopropenyl - bicyclo[4.2.1]nona - 2,4 - diene. 2,3 - Dimethyl - 1,3 - butadiene gives 8,9dimethylbicyclo [4.4.1]undeca - 2,4,8 - triene, a product of [6 + 4]cycloaddition, while [6 + 2]cross-adducts are minor products. The reaction of cycloheptatriene with norbornadiene gives mainly hexacyclo[6.5.1.0^2,7.0^3,12.^6,10.0^9,13]tetradec - 4 - ene via [6+2]cycloaddition followed by intramolecular Diels-Alder reaction. As a by-product, pentacyclo[7.5.0.0^2,7.0^3,5.0⁴⁸]tetradeca - 10,12 - diene is formed by a [2+2+2]mechanism. Addition of cycloheptatriene to diphenylacetylene and bis - (tri- methylsilyl)acetylene furnishes sustituted bicyclo[4.2.1]nona - 2,4,7 - trienes. Alkenes, E,E-2,4 - hexadiene and 1,3 - cyclooctadiene are unreactive. The [6+2]cycloaddition is made possible by coordination of cycloheptatriene to titanium, which changes the symmetry of the frontier orbitals in the triene. The reactivity of the trienophile is also enhanced by coordination to the catalyst.     

[6+2] Cycloaddition of N-phenyltriazolinedione with cycloheptatriene derivatives mediated and stereodirected by a chiral 3-oxy substituent

The addition of N-phenyltriazolinedione to a 7,7-dimethylcycloheptatriene derivative afforded a [6+2] adduct, which was found to be produced by the rearrangement of an initially formed [4+2] adduct. The regioselectivity of the initial addition was controlled by the 3-oxy-substituent, which also mediates the PTAD addition to the tropilidene form. The chiral 3-substituent also controlled the stereoselectivity of the addition to a high degree.     

The consecutive [2+2] cycloaddition-ring expansion route to diastereomeric 1,4-diazepin-5-ones from imino-ketenimines. Alternative intramolecular transamidation of β-lactams

Azeto[1,2-a]imidazoles are prepared by a formal intramolecular [2+2] cycloaddition of imino-ketenimines in which an ethylene chain is linking the nitrogen atoms of both functionalities, bearing a methyl and a phenyl group on the terminal carbon atom of the heterocumulene. By acid-catalyzed hydrolysis these azeto[1,2-a]imidazoles are converted into 6,6,7-trisubstituted hexahydro-1,4-diazepin-5-ones, which have been alternatively prepared via intramolecular transamidation of N-(2-aminoethyl)-β-lactams.     

Transition metal-catalyzed [4 + 2 + 2] cycloadditions of bicyclo[2.2.1]hepta-2,5-dienes (norbornadienes) and bicyclo[2.2.2]octa-2,5-dienes

The transition-metal-catalyzed [4 + 2 + 2] cycloadditions of norbornadienes, bicyclo[2.2.2]octa-2,5-diene, and benzobarrelene with 1,3-butadienes proceed in excellent yields using cobalt-based catalytic systems. Two key distinctions between these [4 + 2 + 2] cycloadditions and the corresponding transition-metal-catalyzed [2 + 2 +2] reactions of norbornadiene are the requirement of a bimetal catalytic system with a bisphosphine ligand for the former and exclusive regioselectivity in the [4 + 2 + 2] reaction of 2-substituted norbornadienes to produce 1-substituted adducts. These distinctions may indicate two distinct mechanisms for the [4 + 2 + 2] and [2 + 2 + 2] reactions.     

A strategy for the synthesis of 2-aryl-3-dimethylaminopyrazolo-[3,4-c]pyridines that utilizes [4+1] cycloaddition reactions of 5-arylazo-2,3,6-trisubstituted pyridines

In order to explore the viability and generality of a recently uncovered [4+1] cycloaddition based strategy for the preparation of pyrazolo[3,4-c]pyridine derivatives, members of a series of 5-arylazo-2,3,6-trisubstituted pyridines were prepared by reactions of 3-oxo-2-arylhydrazonopropanals with 3-oxo-3-phenylpropionitrile. The results show that 3-oxo-3-phenylpropionitrile reacts with hydrazone substrates, which do not contain electron-withdrawing substituents on the N-aryl ring of the arylhydrazone moieties, to efficiently produce 6-aryl-2-phenyl-5-arylazonicotinonitriles. In contrast, 2-amino-6-aryl-5-arylazo-3-benzoylpyridines are generated in reactions of 3-oxo-2-arylhydrazonopropanals, which contain electron-withdrawing substituents on the N-aryl moiety. In the forecasted manner, the 6-aryl-2-phenyl-5-arylazonicotinonitriles undergo smooth reactions with dimethylformamide dimethylacetal (DMF-DMA) that led to formation of a new class of 2-aryl-3-dimethylaminopyrazolo[3,4-c]pyridines. The mechanism for this process involves a [4+1] cycloaddition reaction that takes place through initial nucleophilic addition of dimethylamino)methoxycarbene, generated from DMF-DMA, to the azadiene moiety of the arylazopyridines followed by cyclization of the formed zwitterionic intermediate.     

Intramolecular [2+2] cycloaddition of homoallylketenes to bicyclo[2.1.1]hexan-5-ones

Intramolecular [2+2] cycloaddition of γ,δ-unsaturated ketenes derived from hex-5-enoyl chloride derivatives gave bicyclo[2.1.1]hexan-5-ones with complete regioselectivity.     

Convenient and efficient access to tri- and tetra-substituted 4-fluoropyridines via a [3 + 2]/[2 + 1] cyclization reaction

A [3 + 2]/[2 + 1] cycloaddition reaction of gem?difluorocyclopropenes is presented, offering a mild and efficient approach to accessing tri- and tetra-substituted 4-fluoropyridines in moderate to good yields with excellent regioselectivity. Multiple synthetic applications, including process-scale reactions, modification of bioactive molecules, derivatization reactions and synthesis of the analogue of the PKM2 modulator, are subsequently described.     

RhCl3/amine-catalyzed [2+2+2] cyclization of alkynes

The RhCl₃·3H₂O/i-Pr₂NEt-catalyzed [2+2+2] cyclotrimerization of alkynes has been achieved. The reaction can be widely used for various alkynes and provides tri- or hexa-substituted benzenes regioselectively in high yields. The [2+2+2] cycloaddition of diynes and alkynes is also developed, and it affords benzene derivatives in moderate to high yields.     

[2 + 2]-Cycloreversions

Four-membered rings can be cleaved thermally, Photochemically, or catalytically into two π bonded fragments. Theoretical calculations, kinetic studies, and investigations of stereo- and regioselectivity have been undertaken to clarify the question of whether the reaction involves one or two steps and to permit predictions on its course. [2 + 2]-Cycloreversions have been used to clarify the structure of four-membered rings, to prepare highly reactive π electron-systems and–in combination with a [2 + 2]-cycloaddition–to protect double bonds. The combination of a cycloaddition and-reversion can be used to convert a carbonyl group into an olefin. Starting with compounds containing annelated four-membered rings, compounds with two functional groups or large ring systems can be prepared. [2 + 2]-Cycloreversions have also been discussed in connection with storage of solar energy.     

Synthesis of nitrogen bicyclic scaffolds: pyrimido[1,2-a]pyrimidine-2,6-diones

The multi-step synthesis of 1,3,7-trisubstituted pyrimido[1,2-a]pyrimidinediones starting from isothiocyanates is described. These nitrogen bicycles were prepared by an iterative sequence of functionalization/cyclocondensation reactions. [4+2] Cycloaddition reactions took place between diazadienic chains and various acyl chlorides providing sophisticated heterobicycles.     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Hexafluoroantimonic Acid Catalysis: Formal [3+2+2] Cycloaddition of Aziridines with Two Alkynes

A practical method for the synthesis of azepine derivatives, a typical seven‐membered heterocyclic ring system, was developed and involves the use of hexafluoroantimonic acid to catalyze a formal [3+2+2] cycloaddition of aziridines with two alkynes. This method was applicable to two of the same or different terminal alkynes for the [3+2+2] cycloaddition with unactivated aziridines, and furnished the corresponding azepine derivatives in good yields with good levels of chemo‐ and regioselectivity. The mechanism was also discussed according to the results of the in situ HRMS and ¹H NMR analysis.     

Regioselective synthesis of 2,3,4- or 2,3,5-trisubstituted pyrroles via [3,3] or [1,3] rearrangements of O-vinyl oximes

The regioselective synthesis of 2,3,4- or 2,3,5-trisubstituted pyrroles has been achieved via [3,3] and [1,3] sigmatropic rearrangements of O-vinyl oximes, respectively. Iridium-catalyzed isomerization of easily prepared O-allyl oximes enables rapid access to O-vinyl oximes. The regioselectivity of pyrrole formation can be controlled by either the identity of the α-substituent or through the addition of an amine base. When enolization is favored, a [3,3] rearrangement followed by a Paal-Knorr cyclization provides a 2,3,4-trisubstituted pyrrole; when enolization is disfavored, a [1,3] rearrangement occurs prior to enolization to produce a 2,3,5-trisubstituted pyrrole after cyclization. Optimization and scope of the O-allyl oxime isomerization and subsequent pyrrole formation are discussed and mechanistic pathways are proposed. Conditions are provided for selecting either the [3,3] rearrangement or the [1,3] rearrangement product with β-ester O-allyl oxime substrates.     

Gadolinium Photocatalysis: Dearomative [2+2] Cycloaddition/Ring-Expansion Sequence with Indoles

Lanthanide photocatalysts are much less investigated in synthetic chemistry than rare and expensive late transition metals. We herein introduce Gd^III photocatalysis of a highly regioselective, intermolecular [2+2] photocycloaddition/ring-expansion sequence with indoles, which could provide divergent access to cyclopenta[b]indoles and indolines. A simple and commercially available Gd(OTf)₃ salt is sufficient for this visible-violet-light-induced transformation. The reaction proceeds either through a transient or start-to-end dearomatization cascade and shows excellent regioselectivity (usually >95:5 r.r.), broad scope (59 examples), good functional group tolerance and facile scale-up under mild, direct visible-light-excitation conditions. Mechanistic investigations reveal that direct excitation of the Gd(OTf)₃/indole mixture gives an excited state intermediate, which undergoes the subsequent [2+2] cycloaddition and cyclobutane-expansion cascade.     

Nickel‐Catalyzed Facile [2+2+2] Cyclotrimerization of Unactivated Internal Alkynes to Polysubstituted Benzenes

A catalytic [2+2+2] cyclotrimerization of unactivated internal alkynes providing cyclotrimerization products in excellent yields with high regioselectivity is described. The transformation is accomplished by using a simple catalytic mixture comprising Ni(acac)₂, an imidazolium salt and a Grignard reagent at room temperature or 60 °C for 20 min or 1 h.     

Titanium-mediated [2 + 2 + 2] coupling of diynes with homoallylic alcohols

[reaction: see text] In connection with the known diyne-ene [2 + 2 + 2] cycloaddition reactions mediated by titanium aryloxides, the ability of titanium alkoxides to promote coupling of a titanacyclopentadiene with an alkene has been assessed for the isomerization-free preparation of 1,3-cyclohexadienes. The successful cycloaddition by titanium alkoxides is predicated on the use of homoallylic alcohols as the olefin component. With secondary homoallylic alcohols, high 1,3-diastereoselectivity is observed, which lends itself to enantioselective preparation of functionalized 1,3-cyclohexadienes.     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

Highly regioselective construction of spirocycles via phosphine-catalyzed [3 + 2]-cycloaddition

A direct entry to spirocycles with low to moderate regioselectivity was achieved by triphenylphosphine-catalyzed [3 + 2]-cycloaddition of active exo-methylenecycles (1) and ethyl 2,3-butadienoate (2). The regioselectivity of the reaction was greatly improved by using the bulky tert-butyl ester of the 2,3-butadienoate (5). The regioselectivity of the reaction was further enhanced by using the tert-butyl 2-butynoate as the substrate. This protocol provided an efficient entry to the skeleton of spirocarbocycles, especially spiro[4.n]alkanes.