Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

The use of phase-transfer catalysis in palladium-catalyzed carbonylation of organic halides

Aryl, benzyl, vinly and heterocyclic halides RX have been converted in high yields into the corresponding acids RCOOH by adding the RX with a little PPh₃ slowly to a rapidly stirred mixture of aqueous NaOH, [Pd(PPh₃)₂Cl₂], and n-Bu₄NI in toluene under a CO atmosphere.     

Mg-Al hydrotalcites as the first heterogeneous basic catalysts for the Kornblum oxidation of benzyl halides to benzaldehydes using DMSO

Mg-Al hydrotalcites (Mg/Al = 2, 3, 5) act as efficient heterogeneous base catalysts for the conversion of benzyl halides to the corresponding benzaldehydes using DMSO as an oxidant.     

Metal-free one-pot oxidative conversion of benzylic alcohols and benzylic halides into aromatic amides with molecular iodine in aq ammonia, and hydrogen peroxide

Various primary alcohols, particularly benzylic alcohols, could be converted into the corresponding aromatic amides in good yields in a one-pot manner by treatment with molecular iodine in aq. NH₃, followed by reaction with ∼30% aq H₂O₂. Similarly, various benzylic halides could be also converted into the corresponding aromatic amides in good yields in a one-pot manner by treatment with molecular iodine in aq NH₃, followed by reaction with ∼30% aq H₂O₂. The present reactions involve the metal-free one-pot oxidative conversion of benzylic alcohols and benzylic halides into the corresponding aromatic amides, respectively.     

Palladaphosphacyclobutenes as catalysts in Heck and Suzuki reactions

Heck reactions of aryl halides with various olefins and Suzuki reactions of aryl halides with phenylboronic acid catalyzed by palladaphosphacyclobutene have been investigated. The scope of the Heck reaction has been investigated in N,N‐dimethylacetamide at 140 °C using NaOAc as base. Using 0.1% molar ratio of palladaphosphacyclobuyenes, aryl bromides were converted into 1,2‐substitutedethene products in good to high yields through coupling with both vinylarenes and acrylates. Actived aryl chloride reacted with styrene to afford 1,2‐substitutedethene products in moderate yields. The scope of the Suzuki reaction has been conducted in toluene at 110 °C using Cs₂CO₃ as base. Using 0.1% molar ratio of palladaphosphacyclobutene, aryl bromides reacted with phenylboronic acid to afford diaryl derivatives in excellent yield. Copyright © 2008 John Wiley & Sons, Ltd.     

Ligand and base-free Heck reaction with heteroaryl halides

Pd(CH₃CN)₂Cl₂-catalyzed Heck reaction of different heteroaryl halides with olefins is carried out in the absence of both the ligand and base to obtain the corresponding coupling products in good yields.     

Pd-catalyzed one-pot chemoselective hydrogenation protocol for the preparation of carboxamides directly from azides

Carboxamides were obtained efficiently in high yields from azides on reaction with the corresponding pre-formed activated carboxylic acids in a single-step reductive transformation using hydrogen atmosphere (balloon) under Pd/BaSO₄ or Pd/CaCO₃ catalysis. The method is highly chemoselective and compatible with extremely labile functional groups such as benzyl carbamates, benzyl ethers, benzyl esters, and olefins.     

Pd(DPEPhos)Cl2-catalyzed Negishi cross-couplings for the formation of biaryl and diarylmethane phloroglucinol adducts

Several functionalized biaryls and diarylmethanes containing the phloroglucinol subunit were synthesized in 55-85% yields using Negishi cross-couplings of 2,4,6-trimethoxyphenylzinc chloride with aryl and benzyl halides in the presence of catalytic quantities of Pd(DPEPhos)Cl₂. These simple to prepare couplings were generally complete in 1-24 h depending on the halide, and were applicable to aryl and benzyl halides containing both electron-donating and electron-withdrawing groups.     

Efficient C-S cross coupling catalyzed by Cu2O

A protocol for the copper-catalyzed C-S bond formation between aryl, alkyl, or heteroaryl thiols and aryl or heteroaryl halides is reported. The reaction is catalyzed by Cu₂O which shows the highest catalytic activity with ethyl 2-oxocyclohexanecarboxylate ligand in DMSO at 80 °C. The corresponding coupling products are obtained with good to excellent yields under relatively mild reaction conditions with good chemoselectivity and functional group tolerance.     

Synthesis of E-1-(alkoxy-NNO-azoxy)-2-arylethenes by the reaction of bis(alkoxy-NNO-azoxy)methanes with benzyl halides under conditions of phase-transfer catalysis

Reaction of bis(methoxy- and ethoxy-NNO-azoxy)methane with benzyl halides and alkali under the conditions of a phase-transfer catalysis furnishes in one stage E-1-(alkoxy-NNO-azoxy)-2-arylethene in 21–55% yields. The intermediate products, 1,1-bis(alkoxy-NNO-azoxy)-2-arylethanes under the action of alkali eliminate one of the two alkoxy-NNO-azoxy groups with the formation of a double bond. The optimum solvent is DMSO, and as benzyl halides, benzyl chlorides. In the case of 4-bromobenzyl bromide a formation was found of a side bisbenzylation product, 1,3-bis(4-bromophenyl)-2,2-bis(methoxy-NNO-azoxy)propane.     

Oxone/CaCl2/TEMPO体系在温和条件下对醇的氧化反应

Oxone/TEMPO/CaCl₂ (TEMPO＝2,2,6,6-Tetramethyl-1-piperidinyloxy)是一种稳定安全和易得的氧化催化体系, 在室温条件下, 可以氧化苄基或烷基醇生成醛或酮. 苄基伯醇很容易被氧化成相应的醛, 有较高的反应收率(90%～96%), 仲醇氧化成相应的酮, 收率在81%～85%之间, 1,4-丁二醇环氧化生成γ-丁内酯得到了94%的收率.     

An elegant protocol for the synthesis of N-substituted pyrroles through C–N cross coupling/aromatization process using CuFe2O4 nanoparticles as catalyst under ligand-free conditions

A simple and efficient, ligand-free C–N cross-coupling of aryl halides/benzyl bromides with trans-4-hydroxy-l-proline has been developed to produce aromatized N-substituted pyrroles, using a catalytic amount of magnetically separable and recyclable CuFe₂O₄ nanoparticles, in the presence of Cs₂CO₃ in DMSO at 100 °C.     

Reductive esterification of aromatic aldehydes using Zn/Ac2O/imidazole or Zn/Yb(OTf)3/(RCO)2O system

Benzaldehydes are reduced by metallic zinc in the presence of Ac₂O and imidazole, giving the corresponding benzyl acetates in good yields. Reductive esterification of aromatic aldehydes is also carried out via gem-diacetoxy compounds. Carbonyl compounds are readily converted to the gem-diacyloxy compounds in excellent yields on treatment with 2 molar amounts of acid anhydride and 10 mol% of Yb(OTf)₃ in MeCN at room temperature. Thus-formed diacyloxy compounds derived from aromatic aldehydes are reduced in situ by metallic zinc to afford the corresponding esters.     

Highly efficient water promoted allylation and propargylation of arylepoxides via rearrangement-carbonyl addition

A simple and highly efficient one-pot procedure for allylation and propargylation of arylepoxides has been developed. A combination of SnCl₂ and catalytic Pd(0) or Pd(II) promotes the reaction of organic halides and epoxides in DMSO with controlled water addition, leading to the regioselective formation of the corresponding homoallyl and homopropargyl alcohols in good yields.     

Silver-catalyzed decarboxylative halogenation of carboxylic acids

Decarboxylative halogenation of carboxylic acids catalyzed by silver carbonate is reported. ortho-Nitrobenzoic acids react with copper(II) chloride or bromide in DMF/DMSO at 130-140 °C leading to the corresponding aryl halides in moderate to good yields.     

An expedient protocol for conversion of olefins to α-bromo/iodoketones using IBX and NBS/NIS

A variety of olefins have been shown to undergo conversion to the corresponding α-bromo/iodoketones when reacted with NBS/NIS and IBX in DMSO at room temperature. While the reaction is found to occur rapidly with e-rich arylolefins leading to the corresponding haloketones in 65-95% yields in 0.3-3.0 h, those containing e-withdrawing groups are found to yield diketones concomitantly, such that the latter are the exclusive products over extended duration of the reactions.     

The NHCs-mediated cross-coupling of aromatic aldehydes with benzyl halides: synthesis of α-aryl ketones

A new NHCs-mediated synthetic method was found to produce α-aryl ketones in 22-63% yields in one-pot process from the corresponding aromatic aldehydes and benzyl halides. This method is the first example of the NHCs-mediated intermolecular nucleophilic acylation of aromatic aldehydes with benzyl halides.     

Co2(CO)8 as a convenient in situ CO source for the direct synthesis of benzamides from aryl halides (Br/I) via aminocarbonylation

A fast, mild, and functional group tolerant method for the direct synthesis of benzamides from aryl halides (Br, I) via aminocarbonylation, using solid Co₂(CO)₈ as a convenient CO source, has been demonstrated. The developed method is applicable to a wide variety of 1° and cyclic and acyclic 2° amines. Nitro substituted (o, m and p) aryl halides have easily been converted to the corresponding benzamides, without the reduction of the nitro group, in high yields using this in situ carbonylation methodology under microwave irradiation.     

Fluoride-catalyzed conversion of acylsilanes to aldehydes and ketones

Acylsilanes undergo efficient protodesilylation upon treatment with fluoride ion in moist DMSO, HMPT, or THF. The reaction is also catalyzed by methoxide ion in methanol or DMSO, but not by chloride ion or bromide ion. Fluoride-catalyzed desilylation in the presence of alkyl halides, aldehydes, or ketones results in modest yields of the corresponding alkylated products.     

Direct oxidative conversion of alkyl halides into nitriles with molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin in aq ammonia

Various benzylic halides were smoothly and directly converted into the corresponding aromatic nitriles in high yields using molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin, respectively, in aq ammonia. Similarly, primary alkyl halides were also converted into corresponding nitriles in moderate to good yields using molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin in aq ammonia, although a long reaction time was required. The present reaction is a new method for the preparation of aromatic nitriles from benzylic halides and a new method for the conversion of alkyl halides into corresponding nitriles with retention of the number of carbon atoms.