Reaction of iodoarenes with potassium peroxodisulfate/trifluoroacetic acid in the presence of aromatics. Direct preparation of diaryliodonium triflates from iodoarenes

Diaryliodonium triflates have been directly prepared by reaction of some iodoarenes with aromatic substrates in good yields by using K₂S₂O₈/CF₃COOH/CH₂Cl₂. Treatment of a variety of iodoarenes with iodobenzene under the same conditions resulted in ligand transfer, and (4-iodophenyl)(phenyl)iodonium triflate was obtained. This procedure avoids the use of high temperature and severe reaction conditions.     

Generation of Organozinc Reagents by Nickel Diazadiene Complex Catalyzed Zinc Insertion into Aryl Sulfonates

The generation of arylzinc reagents (ArZnX) by direct insertion of zinc into the C−X bond of ArX electrophiles has typically been restricted to iodides and bromides. The insertions of zinc dust into the C−O bonds of various aryl sulfonates (tosylates, mesylates, triflates, sulfamates), or into the C−X bonds of other moderate electrophiles (X=Cl, SMe) are catalyzed by a simple NiCl₂–1,4-diazadiene catalyst system, in which 1,4-diazadiene (DAD) stands for diacetyl diimines, phenanthroline, bipyridine and related ligands. Catalytic zincation in DMF or NMP solution at room temperature now provides arylzinc sulfonates, which undergo typical catalytic cross-coupling or electrophilic substitution reactions.     

Approach to Synthesis of β-Enamino Ketones and Pyrroles Catalyzed by Gallium(III) Triflate Under Solvent-Free Conditions

Metal triflates have been used to catalyze synthesis of β-enamino ketones or pyrroles from amines and 1,3-dicarbonyl or 1,4-dicarbonyl compounds under solvent-free conditions, respectively. Among different metal triflates screened, 0.5 mol% Ga(OTf)₃ efficiently promoted the reactions to give excellent yields. In addition, the catalyst could be recovered easily after the reactions and reused without evident loss in activity.     

The reaction of aryl iodides with hindered α,β,γ,δ-dienones in the presence of the [Pd(OAc)2(PPh3)2]-trialkylammonium formate reagent

Hindered α,β,γ,δ-dienones have been shown to react with aryl iodides in the presence of the [Pd(OAc)₂(PPh₃)₂]-trialkylammonium formate reagent to give mainly 1,4-conjugate addition type products. The α,β,γ,δ-dienones were prepared through reaction of the corresponding vinyl triflates with α,β-enones in the presence of Pd(OAc)₂, K₂CO₃, and tetrabutylammonium chloride at room temperature.     

Palladium-catalyzed cross-coupling reaction of bis(pinacolato)diboron with vinyl triflates β-substituted by a carbonyl group: efficient synthesis of β-boryl-α,β-unsaturated carbonyl compounds and their synthetic utility

Cross-coupling reaction of bis(pinacolato)diboron with β-(trifluoromethanesulfonyloxy)-α,β-unsaturated carbonyl compounds was carried out in the presence of PdCl₂(PPh₃)₂-2PPh₃ (3 mol%) and KOPh in toluene or K₂CO₃ in dioxane for the synthesis of cyclic and acyclic β-boryl-α,β-unsaturated esters, amides, and ketones in high yields. The vinylboronates thus obtained readily participated in carboncarbon bond formation such as cross-coupling with vinyl triflates and 1,4-addition to α,β-unsaturated ketones.     

AuCl-catalyzed reaction of ortho-alkynyl(oxo)benzene with benzenediazonium 2-carboxylate as a synthetic method towards anthracene, triptycene, and phthalazine derivatives

The AuCl-catalyzed benzannulation of ortho-alkynylphenyl ketones with benzenediazonium 2-carboxylate proceeded efficiently at 40 °C in (CH₂Cl)₂ and a variety of anthracene derivatives, having a ketone group at 9-position, were produced in good to high yields. On the other hand, the reaction of ortho-alkynylbenzaldehydes with benzenediazonium 2-carboxylate afforded triptycyl ketones. The reactions most probably proceed through the formation of a zwitterionic intermediate by the gold-induced electrophilic cyclization of ortho-alkynyl(oxo)benzenes, followed by the cycloaddition of benzyne. In contrast, when the above reaction was carried out at rt in 1,4-dioxane, phthalazine derivative was produced without the generation of benzyne.     

Reaction of 3(Z)-benzoylmethylidene-6-nitro-3,4-dihydro-2H-1,4-benzooxazin-2-one with oxalyl chloride

3(Z)-Benzoylmethylidene-6-nitro-3,4-dihydro-2H-1,4-benzooxazin-2-one reacts with (COCl)₂ as imino enol rather than enamino ketone. The reaction is accompanied by replacement of the hydroxy group by chlorine. The molecular and crystal structures of the starting 1,4-benzooxazin-2-one and its chlorinated derivative were studied by X-ray diffraction analysis.     

A simple deprotection of triflate esters of phenol derivatives

Efficient conversion of aryl triflates into the corresponding phenols has been accomplished with Et₄NOH. In contrast to other cleavage reactions, such functional groups as nitro, ketone, halogen, amide and sulfonamide groups were intact under the reaction conditions. This mild removal of the trifluoromethanesulfonyl group would serve a new protecting group of phenols.     

Alkynylation of benzotriazole with silylethynyliodonium triflates. Regioselective synthesis of 2-ethynyl-2H-benzotriazole derivatives

Phenyl(trimethylsilylethynyl)iodonium and tert-butyldimethylsilylethynyl(phenyl)iodonium triflates were applied to alkynylation of benzotriazole. Treatment of the silylethynyliodonium triflates with the potassium salt of benzotriazole ion in (t)BuOH and CH(2)Cl(2) gave 2-(trimethylsilylethynyl)-2H-1,2,3-benzotriazole and 2-(tert-butyldimethylsilylethynyl)-2H-1,2,3-benzotriazole in 74% and 76% yields, respectively. The regioisomers, 1-silylethynyl-1H-1,2,3-benzotriazole derivatives, were minor. In both cases of the silyl-substitued ethynyliodonium salts, novel regioselective alkynylation of benzotriazole at the 2 position was observed.     

Efficient N-arylation of azole compounds utilizing selective aryl-transfer TMP-iodonium(III) reagents

It was determined that diaryliodonium(III) triflates bearing a trimethoxybenzene (TMP) auxiliary are more reactive than the reported selective aryl-transfer iodonium salts in the N-arylation of benzimidazoles and other types of azole compounds under catalytic conditions. The TMP-iodonium(III) salts can thus effectively facilitate the reaction at 50?°C or below, producing the corresponding N-arylated biaryls without the formation of TMP-derived coupling byproducts. Utilization of this TMP reagent under mild conditions would prevent the underlying problem of participation of the auxiliary group in the coupling reactions, which is observed while using the iodonium(III) salts that require elevated temperatures.     

Rapid Synthesis of Zwitterionic Phosphonium Benzoates by a Three‐Component Coupling Involving Phosphines,Arynes and CO2

A mild and easy to perform multicomponent coupling involving phosphines, arynes generated from 2‐(trimethylsilyl)aryl triflates, and CO₂ allowing the transition‐metal‐free synthesis of zwitterionic phosphonium benzoates has been developed. The reaction proceeds via the generation of 1 : 1 zwitterionic intermediates from phosphines and arynes followed by the interception with CO₂ to deliver the carboxylates in moderate to good yields instead of the anticipated benzooxaphosphol‐3(1H)‐ones.     

Reaction of donor-acceptor cyclopropanes with 1,3-diphenylisobenzofuran. Lewis acid effect on the reaction pathway

Reaction of donor-acceptor cyclopropanes with 1,3-diphenylisobenzofuran in the presence of lanthanide triflates, as well as CuOTf, Sn(OTf)₂, SnCl₂, ZnCl₂, GaCl₃, and MgI₂, proceeds as a formal [3+4]-cycloaddition leading to a newly formed seven-membered ring. This reaction was found to be typical of cyclopropane-1,1-diesters and dinitriles, as well as 1-nitrocyclo-propanecarboxylates containing aromatic, heteroaromatic, and vinylic substituents at the C(2) atom of the small ring. When Me₃SiOTf, TiCl₄, SnCl₄, or BF₃·OEt₂ were used as initiators, unusual cyclic hemiacetals were formed via the conjugate 1,4-addition of a cyclopropane and a nucleophile to the diene moiety.     

Radical polymerization of methyl methacrylate initiated by an enolizable ketone–carbon black system

The polymerization of methyl methacrylate (MMA) initiated by an enolizable ketone (R₁? CO? CH₂? CO? R₂)-carbon black system was investigated. Although enolizable ketone itself could not do so, the polymerization of MMA was initiated by enolizable ketone in the presence of carbon black. In addition, a chloranil-enolizable ketone system was able to initiate the polymerization of MMA. It was found that the enol form of the ketone and quinonic oxygen groups on the carbon black surface played an important role in the initiation system; namely, it was considered that the polymerization was begun by the ketone radical (R₁? CO? CH? CO? R₂) formed by a one-electron transfer reaction from enolate ion to quinonic oxygen groups. The effect of solvent on the process was also studied. The rate of the polymerization increased, depending on the solvent used, in the following order: benzene < 1,4-dioxane < dimethyl sulfoxide < N,N-dimethylformamide < N-methyl-2-pyrrolidone. Furthermore, it became apparent that during the polymerization poly(methyl methacrylate) was grafted onto the carbon black surface (grafting ratio was ca. 40% when benzene was used as solvent) and the carbon black obtained gave a stable colloidal dispersion in organic solvent.     

1,4-Carbonylative addition of arylboronic acids to methyl vinyl ketone: a new synthetic tool for rapid furan and pyrrole synthesis

The rhodium catalysed 1,4-carbonylative addition of arylboronic acids to methyl vinyl ketone under carbon monoxide pressure was studied. High yields of 1,4-diketones were obtained using a catalytic system formed from Rh(COD)₂BF₄ (COD=1,5-cyclooctadiene) and triphenylphosphine even at very low catalyst loading (0.02 mol %). A short synthetic procedure combining this carbonylation reaction with a subsequent cyclisation step affords pyrroles or furans.     

Theoretical studies of a singlet oxygen-releasing dioxapaddlane (1,4-diicosa naphthalene-1,4-endoperoxide)

Theoretical calculations have been used to examine singlet oxygen release from a naphthalene endoperoxide which bears a flexible (CH₂)₂₂ polymethylene “lid”. Monte Carlo and ONIOM calculations that incorporated semi-empirical and density functional theory predicted the conformational influence of the polymethylene chain in the cycloreversion of dioxapaddlane, 1,4-diicosa naphthalene-1,4-endoperoxide, to ¹O₂ and 1,4-diicosa naphthalene. This study attempts to build a connection between ¹O₂ generation and “jump rope” dynamics of the dioxapaddlane. The polymethylene chain appears to function as a gatekeeper for the oxygen. Instead of coming full circle, a semi-circle rotation of the polymethylene bridge protected the peroxide group, limiting the dissociation of ¹O₂ from the naphthalene site. Dedicated to István Hargittai for his first twenty years at Structural Chemistry.     

Convenient and Efficient Palladium-Catalyzed Coupling Reaction Between Ferroceneboronic Acid and Organic Triflates

A simple and efficient palladium (Pd)–catalyzed Suzuki cross-coupling reaction between ferroceneboronic acid and organic triflates for the preparation of monosubstituted ferrocene derivatives has been developed. A systematic study of various solvents, bases, and catalysts revealed that the combination of Pd(PPh₃)₄ (0.025 equiv) and K₃PO₄ (2 equiv) in refluxing dioxane gave reproducible and excellent yields of the coupling products. The reaction could be applied to a wide variety of aryl and vinyl triflates in good to excellent yields, and the electronic and steric effects were observed for ortho-, meta-, and para-substituents of aryl triflates.     

The Mukaiyama-Michael addition of a β,β-dimethyl substituted silyl ketene acetal to α,β-unsaturated ketones using tetra-n-butylammonium bibenzoate as a nucleophilic catalyst

The Michael addition of a β,β-dimethyl substituted silyl ketene acetal [Me₂CC(OMe)OSiMe₃] to α,β-unsaturated ketones, namely, 2-cyclopentenone, 2-cyclohexenone, 3-methyl-2-cyclohexenone, isophorone, methyl vinyl ketone and mesityl oxide occurs smoothly in the presence of the nucleophilic catalyst, tetra-n-butyl ammonium bibenzoate (TBABB) in THF giving the corresponding 1,4-adducts in excellent yields.     

Activation of Carbon Dioxide by Silyl Triflate‐Based Frustrated Lewis Pairs

Silyl triflates of the form R_4?nSi(OTf)_n (n=1, 2; OTf=OSO₃CF₃) are shown to activate carbon dioxide when paired with bulky alkyl‐substituted Group 15 bases. Combinations of silyl triflates and 2,2,6,6‐tetramethylpiperidine react with CO₂ to afford silyl carbamates via a frustrated Lewis pair‐type mechanism. With trialkylphosphines, the silyl triflates R₃Si(OTf) reversibly bind CO₂ affording [R′₃P(CO₂)SiR₃][OTf] whereas when Ph₂Si(OTf)₂ is used one or two molecules of CO₂ can be sequestered. The latter bis‐CO₂ product is favoured at low temperatures and by excess phosphine.     

Michael addition of 1,3-dicarbonyl compounds catalyzed by iron oxide nanoparticles

Several iron oxides nanoparticles (Fe₂O₃@Fe₂O₃, Fe°@Fe₂O₃, GO@Fe₂O₃ and calcinated Fe₂O₃) have been assessed as catalysts in the 1,4-addition of a cyclic β-ketoester onto methyl vinyl ketone under neat conditions. It appeared that calcinated Fe₂O₃NP are efficient catalysts at 1?mol% loading for the Michael addition of 1,3-dicarbonyl compounds onto various enones.     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .