Random deflection of the white light beam during self-focusing and filamentation of a femtosecond laser pulse in water

Ti:sapphire femtosecond laser pulse filamentation in competition with optical breakdown in condensed matter is studied both experimentally and numerically using water as an example. Strong random deflection and modulation of the supercontinuum under tight focusing conditions were observed. They manifest the beginning of the filamentation process near the highly disordered plasma created by optical breakdown at the geometrical focus. Received: 13 June 2002 / Revised version: 16 August 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +1-418/656-2623, E-mail: wliu@phy.ulaval.ca     

Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured thin-film EL device

Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured (NS) thin-film electroluminescent (TFEL) device of which emission layer is a multilayer composed with ZnS:Mn layers and 0.7-nm-thick AlN interlayers were studied. The bandgap widening and the increased PL efficiency of Mn²⁺ 3d-3d transitions with a decrease in the ZnS:Mn single-layer thickness down to 5 nm were observed, which is ascribed to quantum confinement effects. Meanwhile, the multilayer with 2-nm-thick ZnS:Mn single-layers shows a drop of PL efficiency, indicating the presence of defective region just on AlN. The tendency of the luminous efficiency of the NS-TFEL device against the ZnS:Mn single-layer thickness is similar to the tendency found in the PL efficiency, indicating the importance of the ZnS:Mn/AlN interface for the device performance.     

Novel technique for the measurement of fiber dispersion properties

We present a novel method for measuring the linear and nonlinear dispersion properties of conventional and micro-structured fibers. It is based on the automated compensation of phase modulations using a high-resolution pulse-shaping device. No tunable laser source is required. Received: 20 December 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-3641/947202, E-mail: stobrawa@ioq.uni-jena.de RID="**" ID="**"Present address: Carl Zeiss Meditec AG, G?schwitzer Strasse 51–52, 07745 Jena, Germany     

Effect of Annealing Temperature on Structural and Optical Properties of N-Doped ZnO Films

Nitrogen-doped ZnO （ZnO：N） films are prepared by thermal oxidation of sputtered Zn3N2 layers on A1203 substrates. The correlation between the structural and optical properties of ZnO：N films and annealing temperatures is investigated. X-ray diffraction result demonstrates that the as-sputtered Zn3N2 films are transformed into ZnO：N films after annealing above 600℃. X-ray photoelectron spectroscopy reveals that nitrogen has two chemical states in the ZnO：N films： the No acceptor and the double donor （N2）o. Due to the No acceptor, the hole concentration in the film annealed at 700℃ is predicted to be highest, which is also confirmed by Hall effect measurement. In addition, the temperature dependent photoluminescence spectra allow to calculate the nitrogen acceptor binding energy.     

Line width of an atom laser

We describe the measurement of the line width of an atom laser beam extracted from a Bose–Einstein condensate. Using a novel magnetic resonance imaging technique, we find that the energy width of the atom laser beam is Fourier-limited by the duration of the output-coupling process. Received: 25 July 2002 / Revised version: 28 October 2002 / Published online: 26 February 2003 RID="*" ID="*"Corresponding author. Fax: +41-1/633-1254, E-mail: koehl@iqe.phys.ethz.ch     

Improvement of optical properties of silica colloidal crystals by sintering

The optical properties of silica colloidal crystals have been improved considerably by sintering. This can be explained by the decrease of defects and the improvement of crystalline quality due to the structure compacting under thermal treatment. A drastic blue shift of the optical attenuation band was also observed. Received: 25 January 2001 / Accepted: 26 January 2001 / Published online: 26 April 2001     

Photoluminescence of crystalline and disordered BTO:Mn powder: Experimental and theoretical modeling

Disordered and crystalline Mn-doped BaTiO₃ (BTO:Mn) powders were synthesized by the polymeric precursor method. After heat treatment, the nature of visible photoluminescence (PL) at room temperature in amorphous BTO:Mn was discussed, considering results of experimental and theoretical studies. X-ray diffraction (XRD), PL, and UV-vis were used to characterize this material. Rietveld refinement of the BTO:Mn from XRD data was used to built two models, which represent the crystalline BTO:Mn (BTO:Mn_c) and disordered BTO:Mn (BTO:Mn_d) structures. Theses models were analyzed by the periodic ab initio quantum mechanical calculations using the CRYSTAL98 package within the framework of density functional theory at the B3LYP level. The experimental and theoretical results indicated that PL is related with the degree of disorder in the BTO:Mn powders and also suggests the presence of localized states in the disordered structure.     

Characterization of nonlinear optical parameters of polymethine dyes

We investigated nonlinear refraction, nonlinear absorption, and saturable absorption of polymethine dyes by the Z-scan technique (λ=1064 nm). The analysis of simultaneous appearance of several nonlinear optical processes in dye solutions excited by picosecond pulses was carried out. The saturable absorption was analyzed taking into account various models. Nonlinear refractive indices, nonlinear absorption coefficients, and saturation intensities of various polymethine dyes were measured. Received: 27 December 2002 / Revised version: 6 March 2003 / Published online: 5 May 2003 RID="*" ID="*"Corresponding author. Fax: +81-471/363-366, E-mail: r_ganeev@issp.u-tokyo.ac.jp RID="**" ID="**"Present address: The Institute for Solid State Physics, The Tokyo University, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8581, Japan     

Temperature dependence of the InP(001) bulk and surface dielectric function

Received: 14 July 1997/Accepted: 14 July 1997     

Growth and optical properties of In:Nd:LiNbO3 crystals

In, Nd double-doped LiNbO₃ (LN) crystals have been grown for the first time. Their infrared (IR) transmission spectra were measured and discussed to investigate their structure and defects. The optical damage resistance of Nd:In:LiNbO₃ crystals were characterized by straightly observing transmission facula distortion method. The optical damage resistance of In (4.0 mol%):Nd:LiNbO₃ was much higher than that of Nd:LiNbO₃. The defects were discussed in this paper to explain the optical damage resistance in the In:Nd:LiNbO₃ crystals.     

Influence of Gamma-Ray Irradiation on Absorption and Fluorescent Spectra of Nd：YAG and Yb：YAG Laser Crystals

We investigate the influence of gamma-ray irradiation on the absorption and fluorescent spectra of Nd^3＋：Y3A15 O12 （Nd： YAG） and Yb^3＋ ： Y3A15 O12 （Yb： YAG） crystals grown by the Czochralski method. Two additional absorption （AA） bands induced by gamma-ray irradiation appear at 255nm and 340nm. The former is contributed due to Fe^3＋ impurity, the latter is due to Fe^2＋ ions and F-type colour centres. The intensity of the excitation and emission spectra as well as the fluorescent lifetime of Nd：YAG crystal decrease after the irradiation of 100 Mrad gamma-ray. In contrast, the same dose irradiation does not impair the fluorescent properties of Yb：YAG crystal. These results indicate that Yb： YA G crystal possesses the advantage over Nd： YA G crystal that has better reliability for applications in harsh radiant environment.     

Simple parameterization of dark-resonance line shapes

We have studied the dispersion and absorption line shapes of coherent population trapping resonances (dark resonances) in thermal cesium vapor. Outside the time-of-flight regime the line shapes can be described by a simple phenomenological model: a sum of a dispersive and an absorptive Lorentzian of identical width and position, whose relative weights depend on the detuning of the laser frequencies from the optical resonance. This functional form can be derived from a theoretical model for the full multilevel structure of an alkali atom. The analytical expressions for the parameters of the line shape model show the same behavior as the experimental data. Received: 4 October 2002 / Revised version: 30 October 2002 / Published online: 8 January 2003 RID="*" ID="*"Corresponding author. Fax: +41-26/300-9631, E-mail: robert.wynands@unifr.ch     

Femtosecond transition state dynamics of cis -stilbene

Femtosecond time-resolved photoion and photoelectron spectroscopy were employed to study the transition state dynamics of cis-stilbene in a molecular beam experiment. Two long-lived photoproducts were found with excitation of 267 nm radiation. Received: 4 August 2000 / Revised version: 11 October 2000 / Published online: 6 December 2000     

Dispersive processes of light-induced defect creation in hydrogenated amorphous silicon

The growing curve of light-induced dangling bonds under illumination has been observed for various intensities of illumination in a-Si:H. It is fitted to a stretched exponential function and then two parameters β and τ involved in the function are estimated as a function of saturated dangling bond density . The experimental values of β, τ, and are compared with those calculated based on our model of light-induced defect creation in a-Si:H.     

Mechanism of conductivity in metal-polymer-metal structures

Received: 25 September 1998 / Accepted: 25 November 1998 / Published online: 24 February 1999     

Linear and nonlinear optical properties of dye-doped KDP crystals: Effect of thermal treatment

Potassium dihydrogen phosphate crystals (KDP, KH₂PO₄) doped with the organic xylenol orange (XO) dye are grown, the XO concentration in the crystal matrix is about 10 ppm. The spectral and luminescent properties of nominally pure, dye-doped and dye-doped/annealed at 150 °C crystals (KDP, KDP:XO and KDP:XO_an) were measured. The annealing temperature effect on the degree of dye protonation in the crystal matrix is established. Analysis of the IR-absorption spectra reveals a strong interaction between the incorporated dye molecules and the hydrogen subsystem of the matrix. The nonlinear optical (NLO) properties of KDP, KDP:XO and KDP:XO_an crystals are studied within the self-action effect of picosecond laser pulses at 532 nm. The mechanism of photoinduced bleaching and the effects of laser beam self-focusing (in KDP) and self-defocusing (in KDP:XO and KDP:XO_an) are supposed to be due to resonance excitation of the subsystems of intrinsic defects and dye molecules, correspondingly. For KDP:XO_an it is shown that thermal annealing of intrinsic crystal defects leads to domination of more effective NLO response of the subsystem of dye molecules that is correlated with photoluminescence data.     

The role of hydrogen- and hydroxyl-doping in CsBr:Eu

Hydrogen- and hydroxyl-doped CsBr:Eu²⁺ storage phosphors were investigated by photostimulated luminescence (PSL) spectra, absorption spectra and PSL lifetime spectra. Hydrogen- and hydroxyl-doping plays an active role related to the trap centers in CsBr:Eu²⁺ storage phosphors. A sharp increase in the PSL yield was observed for non-hydroxyl-doped CsBr:Eu²⁺ annealed in 5%H₂+95%Ar atmosphere. For hydroxyl-doped CsBr:Eu²⁺, the PSL lifetime (361 ns) is obviously shorter than that of typical CsBr:Eu²⁺ storage phosphors.     

Identification of a rotator phase of octamethyl ferrocene and correlations between its structural and dynamical properties

The low- and high-temperature phases of octamethyl ferrocene were studied in detail, using high-resolution X-ray powder diffraction, differential scanning calorimetry and nuclear resonant scattering, in particular the novel technique of synchrotron radiation perturbed angular correlations (SRPAC). Much as in the case of an analogous but more unsymmetrical molecule, octamethyl ethinyl ferrocene, the high-temperature phase possesses the space group with lattice parameters , , which in the rhombohedral setting correspond to , α=104.79^°. An increase of the volume per formula unit of about 12% across the phase transition is observed.The rotation of the electric field gradient, which can be identified with the rotation of the entire molecule within the lattice, follows Arrhenius behaviour with a high activation energy of . Whereas precursor effects and a change in activation energy were observed for octamethyl ethinyl ferrocene, no such effects are observed for octamethyl ferrocene. We relate this difference to the absence of the ethinyl substituent in octamethyl ferrocene.     

Effect of substrate and annealing on the structural and optical properties of ZnO:Al films

ZnO:Al thin films with c-axis preferred orientation were deposited on glass and Si substrates using RF magnetron sputtering technique. The effect of substrate on the structural and optical properties of ZnO:Al films were investigated. The results showed a strong blue peak from glass-substrate ZnO:Al film whose intensity became weak when deposited on Si substrate. However, the full width at half maxima (FWHM) of the Si-substrate ZnO:Al (0 0 2) peaks decreased evidently and the grain size increased. Finally, we discussed the influence of annealing temperature on the structural and optical properties of Si-substrate ZnO:Al films. After annealing, the crystal quality of Si-substrate ZnO:Al thin films was markedly improved and the intensity of blue peak (∼445 nm) increased noticeably. This observation may indicate that the visible emission properties of the ZnO:Al films are dependent more on the film crystallinity than on the film stoichiometry.     

Behaviour of discontinuous gold films on SrTiO3 substrates under annealing

Morphological changes of thin, discontinuous gold films on SrTiO₃ substrates, resulting from evaporation in the temperature range of 1143-1278 K, have been investigated by means of scanning electron microscopy (SEM) and atomic force microscopy (AFM). If the gold covered fraction of the surface is small, the evaporation kinetics can be related to the desorption of adatoms. Measuring the density of the gold beads and the time dependence of the effective thickness of the film as calculated from the diameter of the beads, the following parameters have been determined: the surface diffusion length of the gold adatoms, , the mass transfer surface diffusion coefficient, and the evaporation flux, .