Rational aspect ratio and suitable antibody coverage of gold nanorod for ultra-sensitive detection of a cancer biomarker

We report a simple, ultra-sensitive, and straightforward method for non-labeling detection of a cancer biomarker, using Rayleigh light scattering spectroscopy of the individual nanosensor based on antibody-antigen recognition and localized surface plasmon resonance (LSPR) λ(max) shifts. By experimentally measuring the refractive index sensitivity of Au nanorods, the Au nanorod with an aspect ratio of ~3.5 was proven optimal for the LSPR sensing. To reduce the steric hindrance effect as well as to immobilize a large amount of ligand on the nanoparticle surface, various mixtures containing different molar ratios of HS(CH(2))(11)(OCH(2)CH(2))(6)OCH(2)COOH and HS(CH(2))(11)(OCH(2)CH(2))(3)OH were applied to form different self-assembled monolayer surfaces. The results showed that the best molar ratio for antibody conjugation was 1 : 10. When using individual Au nanorod sensors for the detection of prostate specific antigen (PSA), the lowest concentration recorded was ~1 aM (~6 × 10(5) molecules), corresponding to LSPR λ(max) shifts of ~4.2 nm. These results indicate that sensor miniaturization down to the nanoscale level, the reduction of steric hindrance, and optimization of size, shape, and aspect ratio of nanorods have led to a significant improvement in the detection limit of sensors.     

Flocculation behavior of temperature-sensitive poly(N-isopropylacrylamide) microgels containing polar side chains with -OH groups

The flocculation behavior of poly(N-isopropylacrylamide) (pNIPAM) microgels containing polar -(OCH(2)CH(2))(3)OH chains, incorporated by the copolymeric components (triethyleneglycol methacrylate, TREGMA), in aqueous NaCl solution was investigated. Determination of the critical flocculation temperatures (CFTs) and the critical flocculation concentrations (CFCs) of the microgels at 45 degrees C shows that polar -(OCH(2)CH(2))(3)OH chains have different influence on the flocculation behavior of the microgels at temperatures below and above their volume phase transition temperatures (VPTTs). The flocculation of the microgels becomes more difficult with the increase of -(OCH(2)CH(2))(3)OH chains below the VPTT. In contrast, the microgels flocculate more easily with more -(OCH(2)CH(2))(3)OH chains above the VPTT. Preliminary investigation on the flocculation kinetics of the microgels further shows that -(OCH(2)CH(2))(3)OH chains have different effects on the flocculation rate at temperatures below and above the VPTT. The flocculating rate of the microgels at 25 degrees C decreases with the increase of -(OCH(2)CH(2))(3)OH chains. While the flocculation rate at 45 degrees C increases with the increase of -(OCH(2)CH(2))(3)OH chains due to their enrichment on the surface of the microgels as a result of the temperature-induced volume-phase transition, which was verified by variable temperature (1)H NMR spectroscopy. The polar -(OCH(2)CH(2))(3)OH chains rich in the surface increase the attractive force between the microgels, promoting the flocculation.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Bioelectronic modulation of single-wavelength localized surface plasmon resonance (LSPR) for the detection of electroactive biomolecules

The simplification of localized surface plasmon resonance (LSPR) detection can further promote the development of optical biosensing application in point-of-care testing. In this study, we proposed a simple light emitting diode (LED) based single-wavelength LSPR sensor modulated with bio-electron transfers for the detection of electroactive biomolecules. Indium tin oxide electrode loaded with nanocomposites of polyaniline coated gold nanorod was used as LSPR chip, and the applied electric potential was scanned at the LSPR chip for single-wavelength LSPR biosensing. Under the scanning of applied potentials, biological electron transfer of redox reaction was employed to demonstrate the bioelectronic modulation of single-wavelength LSPR for selective electroactive biomolecule detection. Without any additional recognition material, electroactive biomolecules uric acid and dopamine were detected directly with a sensitivity of 5.05 μmol/L and 7.11 μmol/L at their specific oxidation potentials, respectively. With the simplified optical configuration and selective bioelectronic modulation, the single-wavelength LSPR sensor is promising for the development of simple, low-cost, and high specificity optical biosensor for point-of-care testing of electroactive biomolecules.     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

Ligand-modification effects on the reactivity, solubility, and stability of organometallic tantalum complexes in water

Tantalum complexes [TaCp*Me{κ(4)-C,N,O,O-(OCH(2))(OCHC(CH(2)NMe(2))=CH)py}] (4) and [TaCp*Me{κ(4)-C,N,O,O-(OCH(2))(OCHC(CH(2)NH(2))=CH)py}] (5), which contain modified alkoxide pincer ligands, were synthesized from the reactions of [TaCp*Me{κ(3)-N,O,O-(OCH(2))(OCH)py}] (Cp* = η(5)-C(5)Me(5)) with HC≡CCH(2)NMe(2) and HC≡CCH(2)NH(2), respectively. The reactions of [TaCp*Me{κ(4)-C,N,O,O-(OCH(2))(OCHC(Ph)=CH)py}] (2) and [TaCp*Me{κ(4)-C,N,O,O-(OCH(2))(OCHC(SiMe(3))=CH)py}] (3) with triflic acid (1:2 molar ratio) rendered the corresponding bis-triflate derivatives [TaCp*(OTf)(2){κ(3)-N,O,O-(OCH(2))(OCHC(Ph)=CH(2))py}] (6) and [TaCp*(OTf)(2){κ(3)-N,O,O-(OCH(2))(OCHC(SiMe(3))=CH(2))py}] (7), respectively. Complex 4 reacted with triflic acid in a 1:2 molar ratio to selectively yield the water-soluble cationic complex [TaCp*(OTf){κ(4)-C,N,O,O-(OCH(2))(OCHC(CH(2)NHMe(2))=CH)py}]OTf (8). Compound 8 reacted with water to afford the hydrolyzed complex [TaCp*(OH)(H(2)O){κ(3)-N,O,O-(OCH(2))(OCHC(CH(2)NHMe(2))=CH(2))py}](OTf)(2) (9). Protonation of compound 8 with triflic acid gave the new tantalum compound [TaCp*(OTf){κ(4)-C,N,O,O-(OCH(2))(HOCHC(CH(2)NHMe(2))=CH)py}](OTf)(2) (10), which afforded the corresponding protonolysis derivative [TaCp*(OTf)(2){κ(3)-N,O,O-(OCH(2))(HOCHC(CH(2)NHMe(2))=CH(2))py}](OTf) (11) in solution. Complex 8 reacted with CNtBu and potassium 2-isocyanoacetate to give the corresponding iminoacyl derivatives 12 and 13, respectively. The molecular structures of complexes 5, 7, and 10 were established by single-crystal X-ray diffraction studies.     

Facile allylic C-H bond activation on the bridging disulfide ligand in the Ru(III) dinuclear complex having a conjugated RuSSRu core

Treatment of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1), which is prepared by the reaction of [[RuCl(P(OCH(3))(3))(2)](2)(mu-S(2))(mu-Cl)(2)] (2) with 4 equiv of AgCF(3)SO(3), with terminal alkenes such as 1-pentene, allyl ethyl ether, allyl phenyl ether, 1,4-hexadiene, and 3-methyl-1-butene, resulted in the formation of complexes carrying a C(3)S(2) five-membered ring, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CR(1)R(2)S]](CF(3)SO(3))(4) (3, R(1) = CH(2)CH(3), R(2) = H, 40%; 4, R(1) = OCH(2)CH(3), R(2) = H, 60%; 5, R(1) = OC(6)H(5), R(2) = H, 73%; 6, R(1) = CH=CHCH(3), R(2) = H, 48%; 7, R(1) = R(2) = CH(3), 40%). Reaction of 1 with methylenecycloalkanes was found to give several different types of products, depending on the ring size of the substrates. A trace of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(CH(2)CH(2))CH(CH(3))S]](CF(3)SO(3))(4) (9) having a C(2)S(2) four-membered ring to bridge the two Ru atoms was obtained by the reaction of 1 with methylenecyclobutane, whereas the reaction with methylenecyclohexane gave [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-S(CH(2)(C=CHCH(2)CH(2)CH(2)CH(2))S)](CF(3)SO(3))(3) (10) in 69% yield via C-S bond formation and elimination of a proton. Throughout these reactions with alkenes giving a variety of products, the activation of the allylic C-H bond is always the essential and initial key step.     

Controlled self-assembly of filled micelles on nanotubes

We have used coarse-grained molecular dynamics simulations to show that hydrated lipid micelles of preferred sizes and amounts of filling with hydrophobic molecules can be self-assembled on the surfaces of carbon nanotubes. We simulated micelle formation on a hydrated (40,0) carbon nanotube with an open end that was covered with amphiphilic double-headed CH(3)(CH(2))(14)CH(((CH(2)OCH(2)CH(2))(2)(CH(2)COCH(2)))(2)H)(2) or single-headed CH(3)(CH(2))(14)CH(2)((CH(2)OCH(2)CH(2))(2)(CH(2)COCH(2)))(4)H lipids and filled with hexadecane molecules. Once the hexadecane molecules inside the nanotube were pressurized and the lipids on its surface were dragged by the water flowing around it, kinetically stable micelles filled with hexadecane molecules were sequentially formed at the nanotube tip. We investigated the stability of the thus-formed kinetically stable filled micelles and compared them with thermodynamically stable filled micelles that were self-assembled in the solution.     

Structural and mechanistic investigations of the oxidation of dimethylplatinum(II) complexes by dioxygen

The oxidation of (tmeda)Pt(II)(CH(3))(2) (1, tmeda = N,N,N',N'-tetramethylethylenediamine) to (tmeda)Pt(IV)(OH)(OCH(3))(CH(3))(2) (3) by dioxygen in methanol proceeds via a two-step mechanism. The initial reaction between (tmeda)Pt(CH(3))(2) and dioxygen yields a hydroperoxoplatinum(IV) intermediate, (tmeda)Pt(OOH)(OCH(3))(CH(3))(2) (2), which reacts with a second equivalent of (tmeda)Pt(CH(3))(2) to afford the final product 3. Both 2 and 3 have been fully characterized, including X-ray crystallographic structure determinations. The effect of ligand variation on the oxidation of several dimethylplatinum(II) complexes by 2 as well as by dioxygen has been examined.     

Preferential adsorption of amino-terminated silane in a binary mixed self-assembled monolayer

The composition and structure of a binary mixed self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APS, NH(2)(CH(2))(3)Si(OCH(2)CH(3))(3)) and octadecyltrimethoxysilane (ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)) on a silicon oxide surface have been characterized by water contact-angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. XPS demonstrated that APS in the mixed SAM is significantly enriched in comparison to that in solution, indicating the preferential adsorption of APS during the SAM formation. AFM observations showed that the mixed SAM becomes rougher. SFG revealed that the coadsorption of APS induced a conformation disordering in the ODS molecules present in the mixed SAM. The surface enrichment of APS has been explained in terms of differences in the surface adsorption rates of the two components as well as in the self-congregation states of APS molecules in the bulk solution. Furthermore, the structure of the water molecules on the mixed SAM surface in contact with the aqueous solutions at different pH's has also been studied. The results indicate that the mixed-SAM modified surface is positively charged at pH < 5 and negatively charged at pH > 7.     

Au nanoparticles stabilised by PEGylated low generation PAMAM dendrimers: design, characterisation and properties

The preparation and characterisation of a series of well-defined low generation (poly)amidoamine (PAMAM)-based dendrimers with end-grafted ethylene glycol ether moieties of type N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(3) (3a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 3b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 3c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)), [CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (4, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and (R(2)NCH(2)CH(2)NHC(O)CH(2)CH(2))N[CH(2)CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (5a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 5b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 5c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)) and their application for the stabilisation of gold nanoparticles (Au NPs) is described. These dendrimers were prepared by a consecutive divergent synthesis methodology including Michael addition and amidation cycles. For comparison, amidoamine related model compounds N(C(3)H(7))R(2) (1, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and [CH(2)NR(2)](2) (2, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) were also synthesised to estimate the minimum required donating capabilities of the stabiliser. Loading the appropriate dendritic templates with H[AuCl(4)] (12) and subsequent reduction of the respective metallodendrimers with Na[BH(4)] produced dendrimer encapsulated gold colloids. The dendrimeric scaffold, the length of the ethylene glycols, the adjusted stabilizer:gold ratio and the duration of reaction time affects the average Au particle diameter in a range of 4.0 (±0.9) to 58.5 (±14.5) nm. Furthermore, depending on the nature of the stabiliser, nanoparticles were formed having spherical or multiple morphologies. Characterisation by transmission electron microscopy (TEM), dynamic light scattering (DLS), UV/vis, and IR spectroscopy revealed that Au NPs are formed and protected inside the dendrimer scaffold.     

Characterization and Application of Surface Plasmon-Enhanced Optical Diffraction from Electrodeposited Gold Nanowire Arrays

Arrays of gold nanowires formed by the process of lithographically patterned nanowire electrodeposition (LPNE) were characterized by a combination of SEM, polarized UV-visible absorption spectroscopy and optical diffraction measurements. A transverse localized surface plasmon resonance (LSPR) was observed for gold nanowire arrays with an absorption maximum (λ(max)) that varied with nanowire width. Transmission optical diffraction measurements were measured with the even and odd diffraction orders creating an alternating, out of phase sinusoidal intensity pattern characteristic of the LPNE nanowire arrays. The intensities of the even diffraction order maxima were the strongest for nanowires with a width of 115 ± 10 nm; nanowires of this width exhibit a λ(max) of 635 ± 10 nm, verifying that the transverse LSPR has enhanced the optical diffraction signal. Real time total internal reflection diffraction intensity measurements were used to monitor in situ the electrodeposition of silver monolayers onto the gold nanowire arrays.     

Synthesis of heterometallic bismuth/molydenum alkoxides and their behavior on silica surfaces

The reaction of [(C(3)H(5))Mo(CO)(2)(CH(3)CN)(2)Cl], 2, with [Bi(OCH(2)CH(2)OCH(3))(3)](2) on a large scale leads to the novel molybdenum/bismuth alkoxide [(C(3)H(5))Mo(CO)(2)(mu-kappa O,2 kappa O'-OCH(2)CH(2)OCH(3))(2)(mu-kappa O-OCH(2)CH(2)OCH(3))BiCl], 6, as the main product as well as to [(C(3)H(5))Mo(CO)(2)(mu-kappa O,2 kappa O'-OCH(2)CH(2)OCH(3))(2)(mu-Cl)BiCl], 4, as a byproduct. Both compounds were characterized by elemental analysis, IR, and NMR spectroscopy as well as by X-ray diffraction. If 6 is brought into contact with a large excess of silica gel, aggregation and condensation reactions are initiated, which led to clusters of ca. 200 nm size spread over the silica surface. When the resulting material is calcinated at 350 degrees C in the presence of O(2), all organic ligands are eliminated and the metal oxo units rearrange: SEM/EDX measurements showed afterward Mo-free bismuth oxo clusters with sizes between 30 and 1000 nm, which are distributed together with molybdenum oxo particles of lower nuclearity over the silica surface. If such a material is employed as a potential catalyst for the propene oxidation under technical conditions, no activity is observed. If, however, the process is performed under very low pressures, a conversion of 5% is found. This result is discussed in the context of the mechanism proposed for the technical oxidation of propene to acrolein on bismuthmolybdate catalysts.     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

Structures, electronic properties and solid state luminescence of Cu(I) iodide complexes with 2,9-dimethyl-1,10-phenanthroline and aliphatic aminomethylphosphines or triphenylphosphine

The luminescent complexes of triphenylphosphine and two interesting aminomethylphosphines: P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3) and P(CH(2)N(CH(2)CH(2))(2)O)(3) with copper(I) iodide and 2,9-dimethyl-1,10-phenanthroline (dmp): [CuI(dmp)PPh(3)], [CuI(dmp)P(CH(2)N(CH(2)CH(2))(2)NCH(3))(3)] and [CuI(phen)P(CH(2)N(CH(2)CH(2))(2)O)(3)] are presented in this work. These complexes were characterized in solution by means of NMR spectroscopy and their structures were crystallographically determined in the solid state. All complexes crystallize as the discrete dimers bound by π-stacking interactions between dmp rings. The coordination geometry about the Cu(I) centre is pseudo-tetrahedral showing small flattening and large rocking distortions. The investigated compounds exhibit intense orange photoluminescence in the solid state (emission peaks at r.t.: λ(max) = 588-592 nm; τ = 1.7-2.2 and 6.4-10.0 μs; at 77 K: λ(max) = 605-612 nm; τ = 4.8-6.5 and 32-47 μs), which is several orders higher than the luminescence of the analogous complexes with 1,10-phenanthroline (phen). Electronic and structural properties of the [CuI(dmp/phen)PR(3)] complexes were characterized using DFT methods to interpret their photophysics. On the basis of TDDFT calculations the broad CT bands observed in UV-Vis spectra are interpreted as the two mixed transitions from σ(CuI) bond with a small admixture of σ(CuP) bond to π* phen or dmp ligand: (MX,MPR(3))LCT, while the emissions most probably occur from two triplet states which are in thermal equilibrium.     

Studies of mixed surfactant solutions of cationic dimeric (gemini) surfactant with nonionic surfactant C12E6 in aqueous medium

The interaction between the alkanediyl-alpha,omega-type cationic gemini surfactant, [(C(16)H(33)N(+)(CH(3))(2)(CH(2))(4)N(+)(CH(3))(2)C(16)H(33))2Br(-)], 16-4-16 and the conventional nonionic surfactant [CH(3)(CH(2))(10)CH(2)(OCH(2)CH(2))(6)OH], C(12)E(6) in aqueous medium has been investigated. The critical micelle concentrations of different mixtures have been measured by surface tension using a du Nouy tensiometer in aqueous solution at different temperatures (303, 308, and 313 K). Maximum surface excess (Gamma(max)) and minimum area per molecule (A(min)) were evaluated from a surface tension vs log(10)C (C is concentration) plot. The cmc value of the mixture was used to compute beta(m), the interaction parameter. The beta(sigma), the interaction parameter at the monolayer air-water interface, was also calculated. We observed synergism in 16-4-16/C(12)E(6) system at all concentration ratios. The micelle aggregation number (N(agg)) has been measured using a steady state fluorescence quenching method at a total surfactant concentration approximately 2 mM at 25 degrees C. The micropolarity and the binding constant (K(sv)) of mixed systems were determined from the ratio of intensity of peaks (I(1)/I(3)) of the pyrene fluorescence emission spectrum. The micellar interiors were found to be reasonably polar. We also found, using Maeda's concept, that the chain-chain interactions are very important in this system.     

Silylation of an OH-terminated self-assembled monolayer surface through low-energy collisions of ions: a novel route to synthesis and patterning of surfaces

Using a multi-sector ion-surface scattering mass spectrometer, reagent ions of the general form SiR(3) (+) were mass and energy selected and then made to collide with a hydroxy-terminated self-assembled monolayer (HO-SAM) surface at energies of approximately 15 eV. These ion-surface interactions result in covalent transformation of the terminal hydroxy groups at the surface into the corresponding silyl ethers due to Si--O bond formation. The modified surface was characterized in situ by chemical sputtering, a low-energy ion-surface scattering experiment. These data indicate that the ion-surface reactions have high yields (i.e. surface reactants converted to products). Surface reactions with Si(OCH(3))(3) (+), followed by chemical sputtering using CF(3) (+), yielded the reagent ion, Si(OCH(3))(3) (+), and several of its fragments. Other sputtered ions, namely SiH(OCH(3))(2)OH(2) (+) and SiH(2)(OCH(3))OH(2) (+), contain the newly formed Si--O bond and provide direct evidence for the covalent modification reaction. Chemical sputtering of modified surfaces, performed using CF(3) (+), was evaluated over a range of collision energies. The results showed that the energy transferred to the sputtered ions, as measured by their extent of fragmentation in the scattered ion mass spectra, was essentially independent of the collision energy of the projectile, thus pointing to the occurrence of reactive sputtering.A set of silyl cations, including SiBr(3) (+), Si(C(2)H(3))(3) (+) and Si(CH(3))(2)F(+), were similarly used to modify the HO-SAM surface at low collision energies. A reaction mechanism consisting of direct electrophilic attack by the cationic projectiles is supported by evidence of increased reactivity for these reagent ions with increases in the calculated positive charge at the electron-deficient silicon atom of each of these cations. In a sequential set of reactions, 12 eV deuterated trimethylsilyl cations, Si(CD(3))(3) (+), were used first as the reagent ions to modify covalently a HO-SAM surface. Subsequently, 70 eV SiCl(3) (+) ions were used to modify the surface further. In addition to yielding sputtered ions of the modified surface, SiCl(3) (+) reacted with both modified and unmodified groups on the surface, giving rise not only to such scattered product ions as SiCl(2)OH(+) and SiCl(2)H(+), but also to SiCl(2)CD(3) (+) and SiCl(2)D(+). This result demonstrates that selective, multi-step reactions can be performed at a surface through low-energy ionic collisions. Such processes are potentially useful for the construction of novel surfaces from a monolayer substrate and for chemical patterning of surfaces with functional groups.     

Metastable ion study of organosilicon compounds. Part XIII: dimethoxydimethylsilane, (CH(3))(2)Si(OCH(3))(2), and dimethoxymethylsilane, CH(3)SiH(OCH(3))(2)

Unimolecular metastable fragmentations of dimethoxydimethylsilane, (CH(3))(2)Si(OCH(3))(2) (MW 120, 1), and dimethoxymethylsilane, CH(3)SiH(OCH(3))(2) (MW 106, 2), upon electron impact ionization have been studied by means of mass-analyzed ion kinetic energy (MIKE) spectrometry and the D-labeling technique in conjunction with thermochemistry. The results have been compared with those of the corresponding carbon analogues, 2,2-dimethoxypropane, (CH(3))(2)C(OCH(3))(2) (MW 104, 3) and 1,1-dimethoxyethane, CH(3)CH(OCH(3))(2) (MW 90, 4). In analogy with the cases of 3 and 4, both molecular ions from 1 and 2 are formed at very low abundance at 70 eV, and begin to decompose by the expulsion of the substituents (H, CH(3) or OCH(3)) on the central silicon atom. These decompositions are followed by the loss of a formaldehyde molecule (CH(2)O), as commonly observed in the mass spectra of methoxysilanes. Further, an ethylene (C(2)H(4)) or a dimethyl ether (CH(3)OCH(3)) molecule loss is observed in the fragmentation of some intermediate ions generated from 1(+)* and 2(+)*, but the mechanisms are different than those in the cases of 3 and 4. Some of these fragmentations are also different than those reported previously. The relative abundance of the ions in many MIKE spectra is explained by the extension of the Stevenson-Audier rule. The reaction, which is in contrast to the rule, however, is rationalized by the energy of the transition state for the reaction, estimated by semi-empirical molecular orbital calculation. The peak at m/z 59 from 2(+)* consists only of CH(3)OSi(+) ion, whereas the peak from 1(+)* consists of two different ions, CH(3)OSi(+) and (CH(3))(2)Si(+)H. The ions CH(3)OSi(+) from 1(+)* and 2(+)* are generated by at least two and three separate routes respectively.     

Gas-phase reactivity of the O=P(OCH3)2+ phosphonium ion with aliphatic esters in a quadrupole ion trap. Spontaneous elimination of ketenes

Ion-molecule reactions between the O=P(OCH(3))(2) (+) phosphonium ions and five aliphatic esters (methyl acetate, methyl propionate, methyl 2-methylpropionate, methyl butyrate and ethyl acetate) were performed in a quadrupole ion trap mass spectrometer. The O=P(OCH(3))(2) (+) phosphonium ions, formed by electron ionization from neutral trimethyl phosphite, were found to react with aliphatic esters to give an adduct ion [RR'CHCOOR", O=P(OCH(3))(2)](+), which loses spontaneously a molecule of ketene CH(2)=CO or substituted ketenes RR'C=CO. Isotope-labeled methyl acetate was used to elucidate fragmentation mechanisms. The potential energy surface obtained from B3LYP/6-31G(d,p) calculations for the reaction between O=P(OCH(3))(2) (+) and methyl acetate is described.     

Ketalization of phosphonium ions by 1,4-dioxane: selective detection of the chemical warfare agent simulant DMMP in mixtures using ion/molecule reactions

Phosphonium ions CH(3)P(O)OCH(3)(+) (93 Th) and CH(3)OP(O)OCH(3)(+) (109 Th) react with 1,4-dioxane to form unique cyclic ketalization products, 1,3,2-dioxaphospholanium ions. By contrast, a variety of other types of ions having multiple bonds, including the acylium ions CH(3)CO(+) (43 Th), CH(3)OCO(+) (59 Th), (CH(3))(2)NCO(+) (72 Th), and PhCO(+) (105 Th), the iminium ion H(2)C[double bond]NHC(2)H(5)(+) (58 Th) and the carbosulfonium ion H(2)C[double bond]SC(2)H(5)(+) (75 Th) do not react with 1,4-dioxane under the same conditions. The characteristic ketalization reaction can also be observed when CH(3)P(OH)(OCH(3))(2)(+), viz. protonated dimethyl methylphosphonate (DMMP), collides with 1,4-dioxane, as a result of fragmentation to yield the reactive phosphonium ion CH(3)P(O)OCH(3)(+) (93 Th). This novel ion/molecule reaction is highly selective to phosphonium ions and can be applied to identify DMMP selectively in the presence of ketone, ester, and amide compounds using a neutral gain MS/MS scan. This method of DMMP analysis can be applied to aqueous solutions using electrospray ionization; it shows a detection limit in the low ppb range and a linear response over the range 10 to 500 ppb.