Oxidation of organosolv lignins in acetic acid

The oxidation of four lignins obtained by organosolv pulping of eucalyptus wood (Acetosolv-eucalyptus Acetosolv lignin [EAL]), sugarcanebagasse (Acetosolv-bagasse Acetosolv lignin [BAL] and in acetone/water/FeCl₃-bagasse acetone/water lignin [BAWL]), and a softwood mixture (Organocell, Munich, Germany) was performed to obtain vanillin, vanillic acid, and oxidized lignin. Experiments were carried out in a cetic acid under oxygen flow using HBr, cobalt(II), and manganese(II) acetates as catalysts. After 10 h the total vanillin and vanillic acid yields were BAL 0.05 mmol, EAL 0.38 mmol, BAWL 0.45 mmol, and Organ ocell 0.84 mmol. Acetosolv lignins are crosslinked, which explains the lower yields in mononuclear products. The reaction volume (Δ V) of this reaction is −817 cm³/mol, obtained in experiments performed under oxygen pressure, showing the high influence of pressure on the oxidation. The major part of the, lignin stays in solution (oxidized lignin), which was analyzed by infrared spectroscopy, showing an increased in carbonyl and hydroxyl groups in comparison with the original lignin. The oxidized lignin can be used as chelating agent in the treatment of effluents containing heavy metals.     

Oxidation in Acidic Medium of Lignins from Agricultural Residues

Agricultural residues as sugarcane straw and bagasse are burned in boilers for generation of energy in sugar and alcohol industries. However, excess of those by-products could be used to obtain products with higher value. Pulping process generates cellulosic pulps and lignin. The lignin could be oxidized and applied in effluent treatments for heavy metal removal. Oxidized lignin presents very strong chelating properties. Lignins from sugarcane straw and bagasse were obtained by ethanol–water pulping. Oxidation of lignins was carried out using acetic acid and Co/Mn/Br catalytical system at 50, 80, and 115 °C for 5 h. Kinetics of the reaction was accomplished by measuring the UV-visible region. Activation energy was calculated for lignins from sugarcane straw and bagasse (34.2 and 23.4 kJ mol⁻¹, respectively). The first value indicates higher cross-linked formation. Fourier-transformed infrared spectroscopy data of samples collected during oxidation are very similar. Principal component analysis applied to spectra shows only slight structure modifications in lignins after oxidation reaction.     

Investigation of biosensor signal bioamplification: comparison of direct electrochemistry phenomena of individual Laccase, and dual Laccase-Tyrosinase copper enzymes, at a Sonogel-Carbon electrode

Direct electrochemistry of Trametes versicolor Laccase (LAC) was found at a Sonogel-Carbon electrode. The bioamplification, performed by dual immobilization of this enzyme and Mushroom Tyrosinase (TYR), of the bio-electrocatalytic reduction of O₂ was investigated. The calculated transfer coefficients were 0.64 and 0.67, and the heterogeneous electron-transfer rate constants were 6.19 and 8.52 s⁻¹, respectively, for the individual LAC and dual LAC-TYR-based Nafion/Sonogel-Carbon bio-electrodes. The responses of the dual enzymes electrode to polyphenols were stronger than those of the individual LAC or TYR biosensors. Hypotheses are offered about the mechanism of bioamplification. The surfaces of the biosensors were also characterized by AFM.     

Influence of steaming pressure on steam explosion pretreatment of Lespedeza stalks (Lespedeza crytobotrya): Part 1. Characteristics of degraded cellulose

A two-step process based on steam explosion pretreatment followed by alkaline ethanol solution post-treatment was used to fractionate Lespedeza stalks (Lespedeza cyrtobotrya). Steam explosion pretreatment, under at 15 kg/m² to 25 kg/m² for 4 min, followed by post-treatment with 60% aqueous ethanol containing 1% NaOH yielded 49.6–65.5% (% dry matter) cellulose rich fractions, compared to 68.6% from non-pretreated material. It was found that the content of glucose was gradually increased from 73.7 to 86.9% as the result of elevating steaming pressure, but the solubilisation of lignin maintained the same level (about 10–11%) regardless of the severity. The average degree of polymerization increased first and then decreased, revealing that autohydrolysis reactions were dominant in different regions during the steam explosion. Scanning electron microscopy images of the cellulosic residues show that steam explosion mainly resulted in breakage of the fibres, and extraction post-treatment led to solution of lignin (and hemicelluloses) and significant defibrillation. The increase of onset degradation temperature, together with the higher pyrolysis residues suggest that the thermal stability of cellulose rich fractions was increased by steam explosion and elevated steaming pressure. All the rich-in-cellulose fractions were further characterized by FT-IR, XRD, and CP/MAS ¹³C NMR spectroscopy.     

Development of Biosensor for Catechol Using Electrosynthesized Poly(3‐methylthiophene) and Incorporation of LAC Simultaneously

Simultaneous electropolymerization of 3‐methylthiophene and incorporation of Laccase (LAC) was carried out in the presence of propylene carbonate as a medium by amperometric method. This enzyme modified electrode was used for the sensing of polyphenol. Catechol is taken as a model compound for the study. UV‐Vis spectral studies suggest no denaturation of LAC in presence of propylene carbonate. The SEM studies reveal the surface morphology and incorporation of LAC in P3MT with agglomerated flaky masses are observed in with and without enzyme micrographs. The cyclic voltammograms were recorded for 0.01 mM catechol on plain glassy carbon, polymer and enzyme incorporated electrodes at pH 6.0 and scan rate 50 mV s^?1. The fabricated electrochemical biosensor was used for the determination of catechol in aqueous solution by Differential Pulse Voltammetry (DPV) technique. The concentration linear range of 8×10^?8 to 1.4×10^?5 M a value of Michealis? Menten constant K_m=7.67 µmol dm^?3 and activation energy is 32.75 kJ mol^?1. It retains 83 % of the original activity after 60 days which is much higher than that of other biosensors. The developed biosensor was used to quantify catechol in the determination in real samples.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.     

Highly Selective Oxidation and Depolymerization of α,γ‐Diol‐Protected Lignin

Lignin oxidation offers a potential sustainable pathway to oxygenated aromatic molecules. However, current methods that use real lignin tend to have low selectivity and a yield that is limited by lignin degradation during its extraction. We developed stoichiometric and catalytic oxidation methods using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) as oxidant/catalyst to selectively deprotect the acetal and oxidize the α‐OH into a ketone. The oxidized lignin was then depolymerized using a formic acid/sodium formate system to produce aromatic monomers with a 36 mol % (in the case of stoichiometric oxidation) and 31 mol % (in the case of catalytic oxidation) yield (based on the original Klason lignin). The selectivity to a single product reached 80 % (syringyl propane dione, and 10–13 % to guaiacyl propane dione). These high yields of monomers and unprecedented selectivity are attributed to the preservation of the lignin structure by the acetal.     

Effect of Catalyst Properties on Hydrocracking of Pyrolytic Lignin to Liquid Fuel in Supercritical Ethanol

The metal-acid bifunctional catalysts have been used for bio-oil upgrading and pyrolytic lignin hydrocracking. In this work, the effects of the metal-acid bifunctional catalyst properties, including acidity, pore size and supported metal on hydrocracking of pyrolytic lignin in supercritical ethanol and hydrogen were investigated at 260 ^oC. A series of catalysts were prepared and characterized by BET, XRD, and NH₃-TPD techniques. The results showed that enhancing the acidity of the catalyst without metal can promote pyrolytic lignin polymerization to form more solid and condensation to produce more water. The pore size of microporous catalyst was smaller than mesoporous catalyst. Together with strong acidity, it caused pyrolytic lignin further hydrocrack to numerous gas. Introducing Ru into acidic catalysts promoted pyrolytic lignin hydrocracking and inhibited the polymerization and condensation, which caused the yield of pyrolytic lignin liquefaction product to increase significantly. Therefore, bifunctional catalyst with high hydrocracking activity metal Ru supported on materials with acidic sites and mesopores was imperative to get satisfactory results for the conversion of pyrolytic lignin to liquid products under supercritical conditions and hydrogen atmosphere.     

Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers

Unbleached (UN), oxygen-delignified and fully-bleached (FB) birch fibers with a residual lignin content of ca. 3, 2 and <1 %, respectively, were used to produce nanofibrillated cellulose (NFC) and nanopaper by using an overpressure device. The tensile index, elongation and elastic modulus of nanopaper were compared and the effect of residual cell wall components accessed. Under similar manufacturing conditions, UN NFC produced nanopaper with a density of 0.99 g/cm³, higher than that from FB NFC (0.7 g/cm³). This translated in much lower air permeability in the case of UN nanopaper (1 and 11 mL/min for UN and FB samples, respectively). Fundamentally, these observations are ascribed to the finer fibrils produced during microfluidization of UN fibers compared to those from lower yield counterparts (AFM roughness of 8 and 17 nm and surface areas of 124 and 98 m²/g for NFC from UN and FB fibers, respectively). As a result, values of stress at break and energy absorption of nanopaper from high yield fibers are distinctively higher than those from fully bleached NFC. Interactions of water with the surface and bulk material were affected by the chemical composition and structure of the nanofibrils. While UN nanopaper presented higher water contact angles their sorption capacity (and rate of water absorption) was much higher than those measured for nanopaper from FB NFC. These and other observations provided in this contribution are proposed to be related to the mechanoradical scavenging capacity of lignin in high shear microfluidization and the presence of residual heteropolysaccharides.     

Physicochemical characterisation of sugar cane bagasse lignin oxidized by hydrogen peroxide

The oxidation of soda lignin extracted from sugar cane bagasse was studied in acid medium. Soda lignin was precipitated from black liquor by adding (36N) sulphuric acid until the pH of the resultant solution was close to 2. The resultant, dried, material was oxidized using hydrogen peroxide. Soda lignin oxidized at different times was investigated by CHNS and EDX chemical analysis, GPC, FTIR and solid state CP-MAS ¹³C NMR spectroscopy. Oxidation increased the amount of carboxylic groups, while that of associated carbohydrates decreased. In addition, self-condensation with increase of molecular weight was observed.     

Wood cellulose nanofibrils prepared by TEMPO electro-mediated oxidation

A softwood bleached kraft pulp (SBKP) was subjected to electro-mediated oxidation in water with TEMPO or 4-acetamido-TEMPO without any chlorine-containing oxidant. Solid recovery ratios of water-insoluble fractions of the oxidized SBKPs were more than 80%, and C6-carboxylate contents increased up to approximately 1 mmol g⁻¹ after oxidation for 48 h. Significant amounts of C6-aldehyde groups (0.17–0.38 mmol g⁻¹) were also formed in the oxidized SBKPs. The degree of polymerization decreased from 2,200 to 520 and 1,400 by the oxidation for 48 h with TEMPO at pH 10 and 4-acetamido-TEMPO at pH 6.8, respectively. The original cellulose I crystal structure and crystallinity of SBKP were maintained after the oxidation, indicating that all C6-oxidized groups were selectively formed on crystalline cellulose microfibril surfaces. The oxidized SBKPs with carboxylate contents of more than 0.9 mmol g⁻¹ were convertible to individual cellulose nanofibrils in yields of more than 80% by disintegration in water.     

Effects of lignin and hemicellulose contents on dissolution of wood pulp in aqueous NaOH/urea solution

Four species of delignified woodchips with about 1 % lignin content (Chlorite–Woodchips) and a series of softwood pulps with different lignin contents were prepared by sodium chlorite delignification. After mechanical defibration, some Chlorite–Woodchips were directly subjected to dissolution treatment in NaOH/urea solvent; the others were first treated with NaOH solution to remove the hemicellulose to obtain NaOH–Chlorite–Woodchips or oxidized with potassium permanganate (OPP) to remove lignin completely to obtain OPP–Chlorite–Woodchips, and then subjected to the dissolution in NaOH/urea solvent. The results showed that the dissolved proportion of the Chlorite–Woodchips ranged from 36 to 46 %, the dissolved proportion of glucan was within 12 %, and most of the hemicellulose was dissolved in NaOH/urea solvent. Compared with Chlorite–Woodchips, the dissolved proportion of NaOH–Chlorite–Woodchips was lower, but their dissolved proportion of glucan was higher. After further permanganate delignification, both the dissolved proportion of the OPP–Chlorite–Woodchips and the dissolved proportion of glucan of the OPP–Chlorite–Woodchips were higher than those of the Chlorite–Woodchips. However, the dissolved proportion of glucan was still limited to only 15–30 %. The effect of the lignin content of softwood pulps on their dissolution is complicated. With the decrease of the lignin content of softwood pulp from 6.9 to 2.8 %, the dissolved proportion of pulp increased from 14 to 26 %. However, further reduction of lignin content from 2.8 to 0.3 % led to a decrease in the dissolved proportion of pulp from 26 to 12 %. The dissolved proportion of glucan followed the same tendency. These results indicated that the dissolution of wood cellulose in NaOH/urea solvent is not simply controlled by the hemicellulose and lignin contents, but also by some other factors.     

Electrochemical enzymatic determinations of ethanol and -lactic acid with a carbon paste electrode modified chemically with nicotinamide adenine dinucleotide

The oxidized form of nicotinamide adenine dinucleotide (NAD⁺) is chemically immobilized at the surface of a carbon paste electrode containing n-octaldehyde. The NAD⁺ is converted to NADH by oxidation of ethanol and -lactic acid catalyzed by their respective dehydrogenases, and the NADH formed is oxidized electrochemically to the original NAD⁺, thus giving a well defined linear-sweep voltammetric peak. The peak area is linearly related to the amount of ethanol or -lactic acid in the range 0.05–2 × 10^-9 mol.     

Electrochemical enzymatic determinations of ethanol and l-lactic acid with a carbon paste electrode modified chemically with nicotinamide adenine dinucleotide

The oxidized form of nicotinamide adenine dinucleotide (NAD⁺) is chemically immobilized at the surface of a carbon paste electrode containing n-octaldehyde. The NAD⁺ is converted to NADH by oxidation of ethanol and l-lactic acid catalyzed by their respective dehydrogenases, and the NADH formed is oxidized electrochemically to the original NAD⁺, thus giving a well defined linear-sweep voltammetric peak. The peak area is linearly related to the amount of ethanol or l-lactic acid in the range 0.05–2 × 10^-9 mol.     

The effect of organic nitrogenous compound content and different pretreatments on agricultural lignocellulosic biomass characterization methods

Considering the diverse compounds contained in lignocellulosic biomasses, especially in agricultural biomass, and the complexity of the different chemical and physical structural connections between these compounds, appropriate analytical methods must be used to characterize these biomasses. In this study, two extraction processes and two analytical methods were used to characterize the main compounds in corn stover residue before and after different pretreatments. The results of this study suggest that pretreatment and organic nitrogenous compound content greatly affect the most common extraction processes and analytical methods used for biomass characterization. For raw corn stover biomass residue, the extraction process using neutral detergent fiber solvent removed more extractives and more organic nitrogenous compounds (18.5 and 2.4%, respectively) than the combination of extractions using water and ethanol (13.4% of extractives and 1.8% of organic nitrogenous compounds). This study also showed that the different pretreatments improve the efficiency of both extraction processes and that these processes seem to be more effective with the neutral detergent solvent extraction than the combination of extractions with water and ethanol. Organic nitrogenous compounds represent a significant proportion of agricultural biomasses; therefore, insufficient organic nitrogenous compound extraction can cause interference with different characterization methods. It was observed that, for the same analytical method and with the raw biomass, the value of insoluble lignin after the extractions with water and ethanol was higher than that obtained after the extraction with the neutral detergent solvent 16.1 and 13.2%, respectively. This can be explained by the fact that there are more organic nitrogenous compounds in the samples after the extraction with water and ethanol than in the samples after the extraction with the neutral detergent solvent. This result was also observed for the pretreated samples. These results, therefore, show that the extraction step is very important because it can remove more organic nitrogenous compounds before the main compounds are characterized (lignin, carbohydrates).     

Ethanol/water pulps from sugar cane straw and their biobleaching with xylanase from Bacillus pumilus

The influence of independent variables (temperature and time) on the cooking of sugar cane straw with ethanol/water mixtures was studied to determine operating conditions that obtain pulp with high cellulose contents and a low lignin content. An experimental 2(2) design was applied for temperatures of 185 and 215 degrees C, and time of 1 and 2.5 h with the ethanol/water mixture concentration and constant straw-to-solvent ratio. The system was scaled-up at 200 degrees C cooking temperature for 2 h with 50% ethanol-water concentration, and 1:10 (w/v) straw-to-solvent ratio to obtain a pulp with 3.14 cP viscosity, 58.09 kappa-number, and the chemical composition of the pulps were 3.2% pentosan and 31.5% lignin. Xylanase from Bacillus pumilus was then applied at a loading of 5-150 IU/g dry pulp in the sugar cane straw ethanol/water pulp at 50 degrees C for 2 and 20 h. To ethanol/water pulps, the best enzyme dosage was found to be 20 IU/g dry pulp at 20 h, and a high enzyme dosage of 150 IU/g dry pulp did not decrease the kappa-number of the pulp.     

Influence of pressure in ethanol/water pulping of sugarcane bagasse

The influence of the pressure in the ethanol/water pulping of sugarcane bagasse was studied using argon pressure varying from 0.5 to 1.5 MPa. The reaction volume and activation volume were studied. For the reaction volume, temperature and time were constant and pressure was varied, and for the activation volume, temperature was constant and pressure and time were varied. The degradation of cellulose was not promoted by the pressure with positive reaction volume (4100 cm³/mol). On the other hand, degradation of xylan (polyoses) and lignin was strongly favored by the pressure and reaction volume ranged from ?1000 to ?3000 cm³/mol.     

Instrumental analyses of nanostructures and interactions with water molecules of biomass constituents of Japanese cypress

Nanostructures consisting of the biomass constituents of the denatured Japanese cypress (Chamaecyparis obtusa) were examined by instrumental analyses at multiple hierarchical levels. Delignification with NaClO₂ solution smoothly proceeded to reveal a distorted cell by scanning electron microscopy; however, a trace amount of lignin still remained in the delignified sample according to attenuated total reflection infrared spectra (ATR-IR). Although hemicellulose could be removed by a treatment with NaOH solution, thermogravimetric analysis and ¹³C cross-polarization/magic angle spinning (CP-MAS) NMR showed a certain amount of hemicellulose remaining. Reaction of the delignified sample with NaOH solution produced a shrunken cell wall that consisted of cellulose with small amounts of lignin and hemicellulose, which were detected by ATR-IR and ¹³C CP-MAS NMR, respectively. These samples from which lignin and/or hemicellulose had been removed easily released water molecules, producing a decrease in the ¹H signal intensity and longer ¹H spin–lattice relaxation time (T₁H) values in variable temperature ¹H MAS NMR. The T₁H values provided information about nano-scale molecular interaction difficult to obtain by other instrumental analyses and they greatly changed depending on the water content and ratio of the biomass constituents. The spin–lattice relaxation of all samples occurred via water molecules under humid conditions that provided sufficient water. Under heat-dried conditions, the spin–lattice relaxation mainly occurred via lignin for the samples with lignin remaining while it occurred via cellulose/hemicellulose for the samples without lignin. The variable temperature T₁H analysis indicated that predominant spin–lattice relaxation route via lignin was caused by higher molecular mobility of lignin-containing samples compared with lignin-free samples.     

Mesoporous Manganese Oxide/Lignin-Derived Carbon for High Performance of Supercapacitor Electrodes

This study explores the modification of lignin with surfactants, which can be used as a template to make mesoporous structures, and can also be used in combination with manganese oxide to produce manganese oxide/lignin-derived carbon. Organosolv extraction, using ethanol (70%) at 150 °C, was carried out to extract lignin from oil palm wood. Lignin was then mixed with Pluronic F-127, with and without Mn(NO₃)₂, and then crosslinked with acidic formaldehyde, resulting in a carbon precursor-based modified lignin. Carbonization was carried out at 900 °C to produce lignin-derived carbon and manganese oxide/lignin-derived carbon. The characterization materials included Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope-energy dispersive X-ray (SEM-EDX) mapping, X-ray diffraction (XRD), and N₂-sorption analysis. FTIR curves displayed the vibration bands of lignin and manganese oxide. SEM images exhibited the different morphological characteristics of carbon from LS120% (lignin with a Pluronic surfactant of 120%) and LS120%Mn20% (lignin with a Pluronic of 120% and Mn oxide of 20%). Carbon LS120% (C-LS120%) showed the highest specific surface area of 1425 m²/g with a mean pore size of 3.14 nm. The largest mean pore size of 5.23 nm with a specific surface area of 922 m²/g was exhibited by carbon LS120%-Mn20% (C-LS120%-Mn20%). C-LS120%Mn20% features two phases of Mn oxide crystals. The highest specific capacitance of 345 F/g was exhibited by C-LS120%-Mn20%.     

Investigation of degradation mechanisms by portable Raman spectroscopy and thermodynamic speciation: the wall painting of Santa María de Lemoniz (Basque Country, North of Spain)

To characterise the polymeric properties of processed lignins, a new method has been developed using hydrophobic interaction chromatography (HIC). This method separates the lignin polymers into fractions based on differences in hydrophobicity using low pressure liquid chromatography (LPLC). The hydrophobic column material consists of monodisperse polystyrene/divinylbenzene beads. An elution gradient was prepared monitoring the electrolyte concentration and pH. Citric acid buffer, containing ammonium sulphate that promotes adsorption to the column material, was used as mobile phase in a step-wise gradient together with ethanol (20/80% (v/v) ethanol/water, pH 12) and isopropanol (40/60% (v/v) isopropanol/water, pH 12). Depending on eluent composition, the degree of elution was 94% or higher. With the HIC method developed, lignosulphonates and kraft lignins were separated into seven distinctive peaks according to hydrophobicity.