Role of molecularly imprinted polymers for selective determination of environmental pollutants--a review

The molecularly imprinted polymers (MIPs) are synthetic polymers possessing specific cavities designed for a target molecule. By a mechanism of molecular recognition, the MIPs are used as selective tools for the development of various analytical techniques such as liquid chromatography, capillary electrochromatography, solid-phase extraction (SPE), binding assays and biosensors. This review describes the application of MIPs to the determination of environmental pollutants in these different analytical approaches with a special emphasis on their potential as selective SPE sorbent for the selective extraction of target analytes from complex matrices.     

Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction

Six molecularly imprinted polymers (MIPs) of erythromycin (ERY) were prepared by noncovalent bulk polymerization using methacrylic acid (MAA) as the functional monomer. On the basis of binding analysis, the MIPs with 1:2 optimum ratio of template to MAA were selected for subsequent scanning electron microscopy and Brunauer–Emmett–Teller analyses, which indicated that the MIPs had more convergent porous structures than the nonimprinted polymers. The equilibrium binding experiments showed that the binding sites of MIPs were heterogeneous, with two dissociation constants of 0.005 and 0.63 mg mL⁻¹, respectively. Furthermore, the performance of the MIPs as solid-phase extraction (SPE) sorbents was evaluated, and the selectivity analysis showed that the MIPs could recognize ERY with moderate cross-reactivity for other macrolides. The overall investigation of molecularly imprinted SPE for cleanup and enrichment of the ERY in pig muscle and tap water confirmed the feasibility of utilizing the MIPs obtained as specific SPE sorbents for ERY extraction in real samples. Figure Schematic diagram of the preparation and application of the erythromycin imprinted molecularly imprinted polymers Suquan Song and Aibo Wu contributed equally to this work.     

Selective sample treatment using molecularly imprinted polymers

The molecularly imprinted polymers (MIPs) are synthetic polymers possessing specific cavities designed for a target molecule. By a mechanism of molecular recognition, the MIPs are used as selective sorbents for the solid-phase extraction of target analytes from complex matrices. MIPs are often called synthetic antibodies in comparison with immuno-based sorbents; they offer some advantages including easy, cheap and rapid preparation and high thermal and chemical stability. This review describes the use of MIPs in solid-phase extraction with emphasis on their synthesis, the various parameters affecting the selectivity of the extraction, their potential to selectively extract analytes from complex aqueous samples or organic extracts, their on-line coupling with LC and their potential in miniaturized devices.     

Trace analysis of antidepressants in environmental waters by molecularly imprinted polymer-based solid-phase extraction followed by ultra-performance liquid chromatography coupled to triple quadrupole mass spectrometry

This paper presents the development, optimization, and validation of an innovative method to analyze trace concentrations of seven selected psychoactive pharmaceuticals in environmental waters. Hereby, the solid-phase extraction (SPE) potential of molecularly imprinted polymers (MIPs) in terms of extraction recovery, breakthrough, precision, and selectivity is studied for the first time. Instrumental analysis by ultra-performance liquid chromatography coupled to triple quadrupole mass spectrometry allowed a rapid (run time = 7.5 min) and sensitive (instrumental detection limit ≤7 pg injected) quantification of the target analytes. A systematic optimization study revealed that, among the seven compounds of interest, mainly the selective serotonin reuptake inhibitors paroxetine, fluoxetine, and citalopram are selectively retained on the MIPs. Experiments performed in spiked river water, sewage treatment plant (STP) effluent and influent showed for these compounds extraction recoveries higher than 70%, breakthrough volumes up to 200 mL, method detection limits (MDL) as low as 0.5 ng/L, and good precision (exemplified by relative standard deviations better than 15%, n ≥ 3). Compared to the widely used hydrophilic–lipophilic balanced (HLB) polymers, the newly developed MIPs indicated to be more resistant toward matrix effects induced ion signal suppression particularly when dealing with relative dirty samples like STP influents. As a result of the better selectivity, the MDL obtained with the MIP-based SPE method was up to a factor of 7 lower compared to those obtained with a recently reported multi-residue HLB method. However, optimizing a HLB method in terms of selectivity, e.g., by introducing a stronger washing protocol, can significantly reduce its MDL up to values approximating those obtained with MIPs.     

Characterization of molecularly imprinted polymers for the extraction of tobacco alkaloids and their metabolites in human urine

Molecularly imprinted polymers (MIPs) are synthetic polymers designed to selectively extract target analytes from complex matrices (including biological matrices). The literature shows that MIPs have a degree of cross-selectivity from analytes within the same class of compounds. A commercially available MIP for tobacco-specific nitrosamines (TSNAs) is designed to be class selective for four TSNA compounds. This study sought to characterize the extent of cross-selectivity of the TSNA MIPs with other tobacco alkaloids. Cross-selectivity and recovery of the SupelMIP™ TSNA SPE cartridges was assessed with N-nitrosonornicotine (NNN), nicotine, cotinine and morphine. Their recoveries were compared with the recoveries of a nonimprinted polymer SPE cartridge, and two traditional SPE cartridges: a Waters mixed-mode cation exchange cartridge and a Waters hydrophilic–lipophilic balance cartridge. NNN and cotinine had the highest recoveries with the MIP cartridge, over 80%, and cotinine samples in urine had >80% recoveries. Nicotine had highly variable recoveries, possibly owing to differing chemical properties from the TSNAs. All three analytes had significantly different recoveries with the MIP cartridges compared with the traditional SPE cartridges. Morphine displayed nonspecific interactions with the MIP cartridges. Utilization of the TSNAs’ cross-selectivity allows for simultaneous extraction and identification of multiple tobacco biomarkers using one extraction technique.     

Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples

Molecularly imprinted polymers (MIPs) were prepared using bisphenol A (BPA) as a template by precipitation polymerization. The polymer that had the highest binding selectivity and ability was used as solid-phase extraction (SPE) sorbents for direct extraction of BPA from different biological and environmental samples (human serum, pig urine, tap water and shrimp). The extraction protocol was optimized and the optimum conditions were as follows: conditioning with 5 mL methanol–acetic acid (3:1), 5 mL methanol, 5 mL acetonitrile and 5 mL water, respectively, loading with 5 mL aqueous samples, washing with 1 mL acetonitrile, and eluting with 3 mL methanol. MIPs can selectively recognize, effectively trap and preconcentrate BPA over a concentration range of 2–20 μM. Recoveries ranged from 94.03 to 105.3 %, with a relative standard deviation lower than 7.9 %. Under the optimal condition, molecularly imprinted SPE recoveries of spiked human serum, pig urine, tap water and shrimp were 65.80, 82.32, 76.00 and 75.97 %, respectively, when aqueous samples were applied directly. Compared with C18 SPE, a better baseline, better high-performance liquid chromatography separation efficiency and higher recoveries were achieved after molecularly imprinted SPE.      

Quercetin molecularly imprinted polymers: Preparation, recognition characteristics and properties as sorbent for solid-phase extraction

Molecular imprinted polymers (MIPs) were prepared through thermal polymerization by using quercetin as the template molecule, acrylamide (AA) as the functional monomer and ethylene glycol dimethacrylate (EDMA) as the cross-linker in the porogen of tetrahydrofuran (THF). The synthesized MIPs were identified by both Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Systematic investigations of the influences of key synthetic conditions, including functional monomers, porogens and cross-linkers, on the recognition properties of the MIPs were conducted. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. Besides quercetin, two structurally similar compounds of rutin and catechol were employed for molecular recognition specificity tests of MIPs. It was observed that the MIPs exhibited the highest selective rebinding to quercetin. Accordingly, the MIPs were used as a solid-phase extraction (SPE) sorbent for the extraction and enrichment of quercetin in cacumen platycladi samples, followed by HPLC-UV analysis. The application of MIPs with high affinity and excellent stereo-selectivity toward quercetin in SPE might offer a novel method for the enrichment and determination of flavonoid compounds in the natural products.     

Recent advances on noncovalent molecular imprints for affinity separations

Molecularly imprinted polymers (MIPs) are tailor-made synthetic materials capable of selectively rebinding a target analyte, or a group of structurally related compounds based on a combination of recognition mechanisms including size, shape, and functionality. Among the advantageous properties of MIPs are the achievable specific affinity, the relative ease of preparation, and their mechanical and chemical robustness, which renders them ideal materials for applications as stationary phase (e. g., affinity chromatography or SPE), or as antibody mimics (e. g., biomimetic assays). Here, we review recent advancements on the application of MIPs in affinity separations and biomimetic assays, which have focused on the synthesis of size- and shape-uniform particles facilitating reproducibility, improved binding site accessibility, and enhanced affinity. While MIPs certainly offer promising potential as selective separation phase in a variety of applications, deeper understanding of the fundamental interactions governing imprinting, and rational understanding of the imprinting mechanism has yet to be achieved for providing rational guidelines in deliberately designing next-generation MIP materials.     

Synthesis and chromatographic evaluation of molecularly imprinted polymers prepared by the substructure approach for the class-selective recognition of glucuronides

Two series of molecularly imprinted polymers (MIPs) for the class-selective recognition of glucuronides have been prepared by using lipophilic substructures of the target analyte as template molecule and potent host monomers against oxyanions, that are expected to establish a strong stoichiometric interaction with the single carboxylic group of the template. The polymers were tested as stationary phases in liquid chromatography for specific recognition. A preliminary investigation of the imprinting properties of eleven MIPs was carried out, by comparing the retention time of the template and of structurally related compounds on the MIP column with that on the corresponding non-imprinted polymer (NIP). The two polymers showing the best performance were selected to further test cotinine, mycophenolic acid, testosterone and their respective glucuronides as model compounds. The high specificity obtained against glucuronides and the different chemical structure of the parent drug make the two MIPs class-selective imprinted receptors, also suitable for SPE application.     

Molecularly imprinted polymers for bisphenol A for HPLC and SPE from water and milk

Molecularly imprinted polymers (MIPs) for bisphenol A (BPA) were prepared by two synthetic routes: semi-covalent and noncovalent methodology. The molecular imprinting effect was evaluated using the polymers in HPLC and SPE. Polymers prepared with noncovalent mode were proven more effective. These polymers were applied in SPE facilitating selective retention of BPA from bottled water and milk. The developed sample preparation was simple and efficient comprising only dilution of milk and MISPE prior to LC-MS analysis. Overall MISPE enhanced sample clean-up. Compared with control nonimprinted polymers and conventional C18 SPE cartridges, the MIPs exhibited selective analyte recognition. The method provided quantitative BPA recoveries, very good reproducibility (% RSDs lower than 7%), and low LOD (0.2 ng/g). MIP interacts similarly with deuterated BPA allowing its use as internal standard in LC-MS. The most critical parameters of MISPE were the organic content in loading-washing medium and the washing volume. Low flow rates in the elution step enhanced extraction recovery. Important advantages of the MIP were: the high breakthrough volumes (> 500 mL of water), high mass capacity (> 10 ng/mg of MIP sorbent), good linearity, and good stability in performance for over 35 cycles of use.     

分子印迹聚合物在抗生素残留测定中的应用

抗生素的滥用及残留对生物体和环境造成极大危害,其含量低、种类多、基质复杂,通常需要进行样品前处理结合色谱分析以实现灵敏测定。分子印迹聚合物（MIPs）能选择性识别、有效富集目标分析物并消除干扰,已广泛用于抗生素的样品前处理中。该文对MIPs制备中面临的挑战进行了总结;对2016年以来抗生素MIPs的固相萃取应用进行了综述和展望,主要包括固相萃取、分散固相萃取、磁固相萃取、基质固相分散萃取、固相微萃取、搅拌棒吸附萃取。此外,该文重点介绍了抗生素MIPs的印迹新策略,如多模板、多功能单体、虚拟模板、刺激响应、亲水性印迹等。最后,该文对抗生素MIPs的制备和前处理应用进行了展望。     

Molecularly Imprinted Polymers for Solid Phase Extraction

The combination of molecularly imprinted polymers (MIPs) and solid phase extraction (SPE) is reviewed. MIPs, which have high selectivity and affinity for a predetermined molecule (template), have been used as sorbents for SPE to selectively isolate analytes from biological, pharmaceutical, and environmental samples. Solid phase extraction with molecularly imprinted polymers (MIP–SPE) is a promising technique which allows specific analytes to be selectively extracted from complex matrices. This survey summarizes the characteristics, development and application of MIP–SPE in recent years. Existed problems and the future direction of MIP–SPE are also discussed.     

Citrinin selective molecularly imprinted polymers for SPE

Molecularly imprinted polymers (MIPs) for citrinin (Cit) with 1‐hydroxy‐2‐naphthoic acid (HNA) as mimic template were prepared and the molecularly imprinted SPE method was developed for the detection of Cit in rice with HPLC. The adsorption properties of HNA and Cit on the MIPs and nonimprinted polymers were investigated. It proved that MIPs showed higher selectivity adsorption to HNA and Cit than nonimprinted polymers were. The recoveries of Cit in rice were in the range of 86.7–97.7%. The spiked rice samples and five rice samples in Beijing market were detected using molecularly imprinted SPE method and satisfied results were obtained as discussed in this article.     

片段/虚拟分子印迹聚合物的应用新进展

分子印迹聚合物(MIPs)是通过模拟酶与底物或抗原抗体特异性结合原理而制备的高分子聚合物,以其结构预定性、识别特异性、制备简便、成本低、耐受性强等优点而被广泛用于样品前处理、传感分析、生物医药、环境/食品分析等多个领域。目前已发展多种策略用于MIPs制备,达到简化制备过程或提高聚合物性能等目的,极大拓宽了MIPs的应用范围。对各种先进印迹策略及其组合使用的探索已成为MIPs制备的研究热点之一。其中,片段印迹策略和虚拟模板印迹策略备受青睐。片段印迹策略是选择目标分子中含有特定官能团的一部分(片段结构)作为模板进行印迹,通过对片段的识别达到对整个分子的识别,能够克服某些目标物不易获得或体积较大不适合作为模板的问题,为印迹易失活、易传染的目标物及整体印迹困难的大分子提供可行的方法。虚拟模板印迹策略是选用与目标物特异性结构相似或相同的其他物质代替目标物作为模板制备MIPs,可在很大程度上解决模板不易获得或较昂贵等问题,以及避免模板可能泄漏对结果造成的影响,尤其适用于目标物造价高、具有感染性、易燃易爆、易降解等不适合作为模板分子的情况。该文选取了最近4年发表在ACS、Elsevier、RSC等数据库约20篇相关文献,综述了片段/虚拟MIPs(FMIPs/DMIPs)的应用新进展。首先,针对蛋白质和微生物检测以及哺乳动物细胞印迹,介绍了FMIPs在生物医药领域的应用,另外介绍了FMIPs在食品分析领域的研究进展。随后,介绍了DMIPs在样品前处理和传感分析领域的应用。在样品前处理中,DMIPs主要作为固相萃取吸附剂进行装柱固相萃取、分散固相萃取、磁固相萃取、基质固相分散萃取等,或作为分子印迹膜材料,用于选择性萃取和富集分离样品中的目标分析物。在传感分析领域,DMIPs主要作为传感器的传感和转导元件,提高化学发光或荧光检测等方法的灵敏度和准确度。最后,对片段印迹和虚拟模板印迹策略的优缺点、区别与联系进行了总结,并展望了这两种策略的发展与应用前景。     

Selective solid-phase extraction of tebuconazole in biological and environmental samples using molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) were prepared by precipitation polymerization using tebuconazole (TBZ) as a template. Frontal chromatography and selectivity experiments were used to determine the binding capabilities and binding specificities of different MIPs. The polymer that had the highest binding selectivity and capability was used as the solid-phase extraction (SPE) sorbent for the direct extraction of TBZ from different biological and environmental samples (cabbage, pannage, shrimp, orange juice and tap water). The extraction protocol was optimized and the optimum conditions were: conditioning with 5 mL methanol:acetic acid (9:1), 5 mL methanol and 5 mL water respectively, loading with 5 mL aqueous samples, washing with 1.2 mL acetonitrile (ACN):phosphate buffer (5:5, pH3), and eluting with 3 mL methanol. The MIPs were able to selectively recognize, effectively trap and preconcentrate TBZ over a concentration range of 0.5–15 μmol/L. The intraday and interday RSDs were less than 9.7% and 8.6%, respectively. The limit of quantification was 0.1 μmol/L. Under optimum conditions, the MISPE recoveries of spiked cabbage, pannage, shrimp, orange juice and tap water were 62.3%, 75.8%, 71.6%, 89% and 93.9%, respectively. MISPE gave better HPLC separation efficiencies and higher recoveries than C18 SPE and strong cation exchange (SCX) SPE. Figure HPLC analysis of spiked pannage after MISPE (A) and after C18 SPE (B). HQ (1), E3 (2), p-NP (3), FTF (4), TBZ (5), PNZ (6), HXZ (7) Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Synthesis and characterization of sol–gel-derived molecular imprinted polymeric materials for cholesterol recognition

The sol–gel-derived host matrices are well known for biosensor applications where various types of organic and biological molecules can be immobilized and can act as recognition elements. The molecular imprinting technology is an attractive alternative method where expensive and labile biorecognition elements can be replaced by molecular imprinted polymers (MIPs), which are capable of recognizing a target molecule of an interest. In the present study, hybrid sol–gel MIPs were synthesized in the form of crushed powder (CP) by both non-hydrolytic and hydrolytic method for cholesterol recognition. These MIPs were characterized by scanning electron microscopy (SEM), fourier transform-infrared (FT-IR), liquid chromatography-mass spectrometry (LC–MS) and nitrogen adsorption–desorption isotherm measurements. The template molecule was extracted by means of soxhlet extraction and calcination method. The cholesterol adsorption experiments were performed by using non-imprinted (NI) and extracted crushed powder (ExCP) and the percentage of adsorption was determined by measuring the residual quantity in the analyte solution using Liebermann-Burchard (L-B) reagent. The adsorption studies with non-imprinted crushed powder (NICP) showed interference with L-B reagent as well as non-specific binding between analyte molecules and silica matrix. The percentage of adsorption or rebinding was found to be higher for phenyl triethoxysilane (PhTEOS)-derived ExCP (composition 3) which was synthesized by the aqueous sol–gel processing method at low pH as compared to PhTEOS-derived (composition 1) and 3-aminopropyltriethoxysilane (APTES)-derived ExCP (composition 2) prepared by non-hydrolytic method. The reusability of used ExCP after re-extraction was also investigated. The various factors affecting rebinding of template molecules were discussed along with interference study. The study provided information on molecular imprinting of cholesterol in sol–gel matrix and highlighted the importance of characterization of MIPs before applying it for sensing applications.     

Recent Applications of Molecularly Imprinted Polymers (MIPs) on Micro-extraction Techniques

Microextraction is considered as one of the most critical steps in the entire analytical process because it can effectively remove interference and pre-concentrate the target analytes. Molecularly imprinted polymers (MIPs) are synthetic polymers with a predetermined selectivity for a given analyte, or group of structurally related compounds, which are excellent materials for sample preparation in the process of microextraction owing to their high selectivity and ability. This review provides a critical overview of the synthesis and characterization of MIPs, with a focus on recent applications in the field of solid-phase microextraction (SPME) and liquid-phase microextraction (LPME). The advantages and drawbacks of the applications of MIPs used in SPME and LPME as well as the future expected trends are also discussed.     

Molecular imprinting of natural flavonoid antioxidants: application in solid-phase extraction for the sample pretreatment of natural products prior to HPLC analysis

As shown in the past years, SPE based on molecularly imprinted polymers (MIPs) may provide significant enhancement of selectivity in sample preparation and analyte preconcentration. The objective of this work was the fabrication of MIPs for the specific adsorption of rutin and quercetin. The two flavonoids were used as the template molecules for the preparation of MIP phases in a self-assembly (noncovalent) approach. The produced MIPs were validated with regard to the imprinting efficiency as media for LC and SPE. The retention behavior of several flavonoid compounds was studied using as stationary phases imprinted, control nonimprinted polymers, and commercial silica-based materials. MIPs were applied as materials for the selective SPE and preconcentration of the flavonoids from white and red wine, orange juice, and tea. The collected fractions were analyzed by high-pressure LC. MIP-SPE facilitated specific analyte isolation and effective sample clean-up. The results show that molecularly imprinted SPE can be a useful tool for the simple, selective, and cost-effective pretreatment of samples containing natural antioxidants.     

RECENT ADVANCES IN THE PREPARATION OF MOLECULARLY IMPRINTED POLYMERS VIA CONTROLLED RADICAL POLYMERIZATION TECHNIQUES

Molecular imprinting technique is a simple and efficient method for the preparation of polymer materials （i. e., molecularly imprinted polymers, MIPs） with tailor-made recognition sites for certain target molecules. The resulting MIPs have proven to be versatile synthetic receptors due to their high specific recognition ability, favorable mechanical, thermal and chemical stability, and ease of preparation. Recent years have witnessed significant progress in the synthesis and applications of MIPs. This review focus on the recent developments and advances in the preparation of MIPs via various controlled radical polymerization techniques.     

分子烙印固相萃取技术在环境样品分析中的应用

分子烙印固相萃取技术克服了传统固相萃取技术选择性差的缺陷,实现了对复杂样品中特定分析对象或杂质的选择性提取,从而大大提高了分析测试的精度和准确性,并降低了检测限。该文对分子烙印聚合物(MIPs)作为固相萃取填料从复杂的环境样品中分离、富集和纯化微量及痕量的目标化合物进行了综述,涉及的目标化合物包括杀虫剂、除草剂、兽药等各类农药残留以及重金属离子和某些生物毒素等。