In Vitro Reduction of Hexavalent Chromium by Cytoplasmic Fractions of <Emphasis Type="Italic">Pannonibacter phragmitetus</Emphasis> LSSE-09 under Aerobic and Anaerobic Conditions

Hexavalent chromate reductase was characterized and was found to be localized in the cytoplasmic fraction of a chromium-resistant bacterium Pannonibacter phragmitetus LSSE-09. The Cr(VI) reductase activity of cell-free extract (S₁₂) was significantly improved by external electron donors, such as NADH, glucose, acetate, formate, citrate, pyruvate, and lactate. The reductase activity was optimal at pH 7.0 with NADH as the electron donor. The aerobic and anaerobic Cr(VI)-reduction enhanced by 0.1 mM NADH were respectively 3.5 and 3.4 times as high as that without adding NADH. The Cr(VI) reductase activity was inhibited by Mn²⁺, Cd²⁺, Fe³⁺, and Hg²⁺, whereas Cu²⁺ enhanced the chromate reductase activity by 29% aerobically and 33% anaerobically. The aerobic and anaerobic specific Michaelis–Menten constant K _m of S₁₂ fraction was estimated to be 64.95 and 47.65 μmol L⁻¹, respectively. The soluble S₁₅₀ fractions showed similar activity to S₁₂ and could reduce 39.7% and 53.4% of Cr(VI) after 1 h of incubation aerobically and anaerobically while the periplasmic contents showed no obvious reduction activity, suggesting an effective enzymatic mechanism of Cr(VI) reduction in the cytoplasmic fractions of the bacterium. Results suggest that the enzymatic reduction of Cr(VI) could be useful for Cr(VI) detoxification in wastewater.     

Heavy Metal Resistances and Chromium Removal of a Novel Cr(VI)-Reducing Pseudomonad Strain Isolated from Circulating Cooling Water of Iron and Steel Plant

Three bacterial isolates, GT2, GT3, and GT7, were isolated from the sludge and water of a circulating cooling system of iron and steel plant by screening on Cr(VI)-containing plates. Three isolates were characterized as the members of the genus Pseudomonas on the basis of phenotypic characteristics and 16S rRNA sequence analysis. All isolates were capable of resisting multiple antibiotics and heavy metals. GT7 was most resistant to Cr(VI), with a minimum inhibitory concentration (MIC) of 6.5 mmol L^?1. GT7 displayed varied rates of Cr(VI) reduction in M2 broth, which was dependent on pH, initial Cr(VI) concentration, and inoculating dose. Total chromium analysis revealed that GT7 could remove a part of chromium from the media, and the maximum rate of chromium removal was up to 40.8 %. The Cr(VI) reductase activity of GT7 was mainly associated with the soluble fraction of cell-free extracts and reached optimum at pH 6.0～8.0. The reductase activity was apparently enhanced by external electron donors and Cu(II), whereas it was seriously inhibited by Hg(II), Cd(II), and Zn(II). The reductase showed a K _m of 74 μmol L^?1 of Cr(VI) and a V _max of 0.86 μmol of Cr(VI) min^?1 mg^?1 of protein. The results suggested that GT7 could be a promising candidate for in situ bioremediation of Cr(VI).     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

A Temperature and Salt-Tolerant <Emphasis Type="SmallCaps">l</Emphasis>-Glutaminase from Gangotri Region of Uttarakhand Himalaya: Enzyme Purification and Characterization

Purification and characterization of halotolerant, thermostable alkaline l-glutaminase from a Bacillus sp. LKG-01 (MTCC 10401), isolated from Gangotri region of Uttarakhand Himalaya, is being reported in this paper. Enzyme has been purified 49-fold from cell-free extract with 25% recovery (specific activity 584.2 U/mg protein) by (NH₄)₂SO₄ precipitation followed by anion exchange chromatography and gel filtration. Enzyme has a molecular weight of 66 kDa. l-Glutaminase is most active at pH 11.0 and stable in the pH range 8.0–11.0. Temperature optimum is 70 °C and is completely stable after 3 h pre-incubation at 50 °C. Enzyme reflects more enhanced activity with 1–20% (w/v) NaCl, which is further reduced to 80% when NaCl concentration was increased up to 25%. l-Glutaminase is almost active with K⁺, Zn²⁺, and Ni²⁺ ions and K _m and V _max values of 240 μM and 277.77 ± 1.1 U/mg proteins, respectively. Higher specific activity, purification fold, better halo-tolerance, and thermostability would make this enzyme more attractive for food fermentation with respect to other soil microbe derived l-glutaminase reported so far.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Purification and Characterization of a Novel Collagenase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> Col-J

The collagenase, produced extracellular by Bacillus pumilus Col-J, was purified by ammonium sulfate precipitation followed by two gel filtrations, involving Sephadex G-100 column and Sepharose Fast Flow column. Purified collagenase has a 31.53-fold increase in specific activity of 87.33 U/mg and 7.00% recovery. The collagenase has a relative molecular weight of 58.64 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The optimal temperature for the enzyme reaction was 45 °C. More than 50% of the original activity still remained after 5 min of incubation at 70 °C or 10 min at 60 °C. The maximal enzyme activity of collagenase was obtained at pH 7.5, and it was stable over a pH range of 6.5–8.0. The collagenase activity was strongly inhibited by Mn²⁺, Pb²⁺, ethylenediamine tetraacetic acid, ethylene glycol tetraacetic acid, and β-mercaptoethanol. However, Ca²⁺ and Mg²⁺ greatly increased its activity. The collagenase from B. pumilus Col-J showed highly specific activity towards the native collagen from calf skin. The K _m and V _max of the enzyme for collagen were 0.79 mg/mL and 129.5 U, respectively.     

Biosorption of Cr(VI) from Water Using Biomass of <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis>: Central Composite Design for Optimization of Process Variables

The potential use of biomass of Aeromonas hydrophila for biosorption of chromium from aqueous solution was investigated. The variables (pH, initial Cr(VI) concentration, biomass dose, and temperature) affecting process were optimized by performing minimum number of experimental runs with the help of central composite design. The results predicted by design were found to be in good agreement (R ² = 99.1%) with those obtained by performing experiments. Multiple regression analysis shows that uptake decreases with increase in pH and biomass dose, whereas it increases with increase in temperature and concentration. The maximum removal of Cr(VI) predicted by contour and optimization plots was 184.943 mg/g at pH 1.5, initial Cr(VI) concentration 311.97 mg/L, temperature 60 °C, and biomass dose 1.0 g. The removal of Cr(VI) was governed by adsorption of Cr(VI) as well as its reduction into Cr(III), which further gets adsorbed. The sorption capacity of biomass was calculated from experimental data using Langmuir sorption model and was found to be 151.50 mg/g at 40 °C and pH 1.5, which is comparable to other biosorbents. In addition to this, Dubinin–Radushkevich model was applied, and it was found that nature of sorption was chemisorption.     

Purification and Characterization of a Novel Heparin Degrading Enzyme from <Emphasis Type="Italic">Aspergillus flavus</Emphasis> (MTCC-8654)

A heparinase-producing fungus was isolated, and the strain was taxonomically characterized as Aspergillus flavus by morphophysiological and 26S rRNA gene homology studies. The culture produced intracellular heparinase enzyme, which was purified 40.5-fold by DEAE-Sephadex A-50, CM-Sephadex C-50, and Sephadex G-100 column chromatography. Specific activity of the purified enzyme was found to be 44.6 IU/μg protein and the molecular weight of native as well as reduced heparinase was 24 kDa, showing a monomeric unit structure. Peptide mass spectrum showed poor homogeneity with the database in the peptide bank. The enzyme activity was maximum at 30 °C in the presence of 300 mM NaCl at pH 7.0. In the presence of Co²⁺, Mn²⁺ ions, and reducing agents (β-mercaptoethanol, dithiothreitol), enzyme activity was enhanced and inhibited by iodoacetic acid. These observations suggested that free sulfohydryl groups of cysteine residues were necessary for catalytic activity of the enzyme. The enzyme was also inhibited by histidine modifier, DEPC, which suggests that along with cysteine, histidine may be present at its active site. The enzyme showed a high affinity for heparin as a substrate with K _m and V _max as 2.2 × 10⁻⁵ M and 30.8 mM min⁻¹, respectively. The affinity of the enzyme for different glycosaminoglycans studied varied, with high substrate specificity toward heparin and heparin-derived polysaccharides. Depolymerization of heparin and fractionation of the oligosaccharides yielded heparin disaccharides as main product.     

Purification and Characterization of Thermostable α-Galactosidase from <Emphasis Type="Italic">Aspergillus terreus</Emphasis><Subscript>GR</Subscript>

An extracellular thermostable α-galactosidase producing Aspergillus terreus _GR strain was isolated from soil sample using guar gum as sole source of carbon. It was purified to apparent homogeneity by acetone precipitation, gel filtration followed by DEAE-Sephacel chromatographic step. The purified enzyme showed a single band after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The molecular weight of the purified enzyme after SDS-PAGE was 108 kDa. The enzyme showed optimum pH and temperature of 5.0 and 65 °C, respectively, for artificial substrate pNPαGal. α-Galactosidase from A. terreus _GR is found to be thermostable, as it was not inactivated after heating at 65 °C for 40 min. The K _m for pNPαGal, oNPαGal, raffinose, and stachyose are 0.1, 0.28, 0.42, and 0.33 mM, respectively. Inhibitors such as 1,10-phenanthroline, phenylmethylsulfonyl fluoride, ethylenediaminetetraacetic acid, mercaptoethanol, and urea have no effect, whereas N-bromosuccinamide inhibited enzyme activity by 100%. Among metal ions tested, Mg²⁺, Ni²⁺, Ca²⁺, Co²⁺, and Mn²⁺ had no effect on enzyme activity, but Ag⁺, Hg²⁺, and Cu²⁺ have inhibited complete activity.     

Flow injection fluorimetric determination of chromium(VI) in electroplating baths by luminescence quenching of tris(2,2'-bipyridyl) ruthenium(II)

A sensitive and selective luminescence quenching method is developed and used for manual and flow injection analysis (FIA) of chromium(VI) by reaction with [Ru(bpy)₃]²⁺. The emission peak of ruthenium(II) at 595 nm is linearly decreased as a function of Cr(VI) concentration. This permits determination of chromium(VI) ion over the concentration range 0.1-20 μg ml⁻¹ with a detection limit of 33 ng ml⁻¹. The quenching process is due to an electron transfer from the luminescent [Ru(bpy)₃]²⁺ complex ion to Cr(VI) resulting in the formation of the non-luminescent [Ru(bpy)₃]³⁺ complex ion. Selectivity for Cr(VI) over many anions and transition, alkali and alkaline earth metal cations is demonstrated. High concentration levels of sulphate, chloride, borate, acetate, phosphate, nitrate, cyanide, Pb²⁺, Zn²⁺, Hg²⁺, Cu²⁺, Cd²⁺, Ni²⁺ and Mn²⁺ ions are tolerated. The effects of solution pH and [Ru(bpy)₃]²⁺ reagent concentration are examined and the reaction conditions are optimized. Validation of the method according to the quality assurance standards show suitability of the proposed method for use in the quality control assessment of Cr(VI) in complex matrices without prior treatment. The method is successfully applied to determine chromium(VI) in electroplating baths using flow injection analysis. Results with a mean standard deviation of ±0.6% are obtained which compare fairly well with data obtained using atomic absorption spectrometry.     

Cloning of a New Xylanase Gene from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. TN119 Using a Modified Thermal Asymmetric Interlaced-PCR Specific for GC-Rich Genes and Biochemical Characterization

A bacterial strain, Streptomyces sp. TN119, was isolated from the gut of Batocera horsfieldi larvae and showed xylanolytic activity. A degenerate primer set was designed based on the base usage of G and C in Actinobacteria xylanase-coding sequences belonging to the glycosyl hydrolases family 10 (GH 10), and used to clone the partial xylanase gene from Streptomyces sp. TN119. A modified thermal asymmetric interlaced (TAIL)-PCR specific for high-GC genes, named GC TAIL-PCR, was developed to obtain the full-length xylanase gene (xynA119; 1089 bp). Rich in GC content (67.8%), xynA119 encodes a new GH 10 xylanase (XynA119), which shares highest identity (48.8%) with an endo-1,4-β-xylanase from Cellulosimicrobium sp. HY-12. Recombinant XynA119 was expressed in Escherichia coli BL21 (DE3) and purified to electrophoretic homogeneity. The enzyme showed maximal activity at pH 6.5 and 60 °C, was stable at pH 4.0 to 10.0 and 50 °C, was resistant to most chemicals (except for Cu²⁺, Mn²⁺, Ag⁺, Hg²⁺ and SDS) and trypsin, and produced simple products. The specific activity, K _m, V _max, and k _cat using oat-spelt xylan as substrate were 57.9 U mg⁻¹, 1.0 mg ml⁻¹, 74.8 μmol min⁻¹ mg⁻¹, and 49.2 s^–1, respectively.     

Preconcentration and separation of Cr(III) and Cr(VI) using sawdust as a sorbent

A simple, inexpensive method based on solid-phase extraction (SPE) on sawdust from Cedrus deodera has been developed for speciation of Cr(III) and Cr(VI) in environmental water samples. Because different exchange capacities were observed for the two forms of chromium at different pH—Cr(III) was selectively retained at pH 3 to 4 whereas Cr(VI) was retained at pH 1—complete separation of the two forms of chromium is possible. Retained species were eluted with 2.5 mL 0.1 mol L⁻¹ HCl and 0.1 mol L⁻¹ NaOH. Detection limits of 0.05 and 0.04 μg mL⁻¹ were achieved for Cr(III) and Cr(VI), respectively, with enrichment factors of 100 and 80. Recovery was quantitative using 250 mL sample volume for Cr(III) and 200 mL for Cr(VI). Different kinetic and thermodynamic properties that affect sorption of the chromium species on the sawdust were also determined. Metal ion concentration was measured as the Cr(VI)–diphenylcarbazide complex by UV–visible spectroscopy. The method was successfully applied for speciation of chromium in environmental and industrial water samples.     

Kinetic studies on H<Superscript>+</Superscript>-catalysed aquation of chromium(III)-oxalato-asparaginato and chromium(III)-oxalato-histidinato complexes

Three chromium(III) complexes with asparagine (Asn) and histidine (His) of the [Cr(ox)₂(Aa)]²⁻ type, where Aa = N,O–Asn, N,O–His or N,N′–His, were obtained and characterized in solution. The complexes with N,O–Aa undergo acid-catalysed aquation to give a free amino acid and cis-[Cr(ox)₂(H₂O)₂]⁻, whereas the complex with N,N′–His undergoes parallel reaction paths: (1) isomerization to the N,O–His complex and (2) liberation of an oxalate ligand. Kinetics of the N,O–Aa complexes in HClO₄ media were studied spectrophotometrically under pseudo-first-order conditions. The absorbance changes were attributed to the chelate ring opening at the Cr–N bond. The linear dependence of rate constants on [H⁺] was established, and a mechanism for the chelate ring cleavage was postulated. The existence of a metastable intermediate with O-monodentate Aa ligand was proved experimentally. Effect of [Cr(ox)₂(Aa)]²⁻ on 3T3 fibroblasts proliferation was studied. The tests revealed low cytotoxicity of the complexes. Complexes with Ala, His and Cys are good candidates for biochromium sources.     

Determination of Kinetic Parameters in the Biosorption of Cr (VI) on Immobilized <Emphasis Type="Italic">Bacillus cereus</Emphasis> M<Superscript>1</Superscript><Subscript>16</Subscript> in a Continuous Packed Bed Column Reactor

Due to technological advancement, environment suffers from untreated toxic heavy metal bearing effluent coming from different industries. Chromium (VI) is one of those heavy metals having adverse impact on ecological balance, human, and plant health because of its carcinogenic properties. Biosorption is presented as an alternative to traditional technologies which are costly and inefficient for treatment of industrial wastes containing low amount of heavy metals. In this study, bioremediation of Cr (VI) ions by immobilized Bacillus cereus M¹ ₁₆ was investigated in a laboratory scale packed bed up-flow column reactor. The effect of important parameters, such as the inlet flow rate, influent concentration, and effective bed height, has been studied. External mass transfer, surface adsorption, and intrabead mass transfer were also studied to conclude the rate limiting step for removal of Cr (VI) and to determine the process parameters which are important for biosorption optimization. The external mass transfer coefficient was calculated at different flow rates (6.51 × 10⁻² to 7.58 × 10⁻² cm/min). Using the model, the surface adsorption rate constant (k _ad) and the intrabead mass transfer coefficient (k _i) were predicted as 0.0267 × 10⁻³ and 0.7465 × 10⁻³ l/g/min, respectively. Both are much lower than the external mass transfer coefficient (k _e). The surface adsorption phenomenon is acting as the rate-limiting step due to its high resistance for removal of Cr (VI).     

Synthesis of Cholesterol-Conjugated Magnetic Nanoparticles for Purification of Human Paraoxonase 1

Human serum paraoxonase 1 (PON1) is known as an antioxidant and is also involved in the detoxification of many compounds. In this study, a novel purification strategy was employed to purify the PON1 by using cholesterol-conjugated magnetic nanoparticles. Magnetic nanoparticles were synthesized and conjugated with cholesterol through diazotized p-aminohippuric acid. In Fourier transform infrared spectrum of cholesterol-p-aminohippuric acid-Fe₃O₄ nanoparticles, the appearance of peaks at 3,358.3, 1,645 cm⁻¹, and at 2,334.9 cm⁻¹ confirmed the conjugation. The molecular weight of purified PON1 was nearly 45 kDa on sodium dodecyl sulfate (SDS)–polyacrylamide gel electrophoresis (PAGE), and isoelectric point was 5.3. The specific activity was 438 U mg⁻¹ protein, and the purification fold was 515 with 73% yield. The K _m values were 1.3 and 0.74 mM with paraoxon and phenyl acetate, respectively. Western blot of 2D-PAGE confirmed the homogeneity and stability of the enzyme. Mg⁺², Mn⁺², glycerol, (NH₄)₂SO₄, PEG 6000, Triton X-100, and phenylmethylsulfonyl fluoride did not show any effect on activity. Pb⁺², Co⁺², Zn²⁺, ethanol, β-mercaptoethanol, and acetone reduced the activity while Ni²⁺, Cd²⁺, Cu²⁺, iodoacetic acid, SDS, dimethylformamide, DMSO inhibited the activity. In vitro enzyme activity was slightly reduced by acetyl salicylic and acetaminophen and reduced 50% with amino glycosides and ampicillin antibiotics at concentrations of 0.6 and 30 mg ml⁻¹, respectively. This is the first report for the synthesis of cholesterol-conjugated magnetic nanoparticles for simple purification of PON1 enzyme.     

Application of Brazilian sawdust samples for chromium removal from tannery wastewater

Brazilian sawdust samples (Caryocar spp.; Manilkara spp.; and Tabebuia spp.) have been used for Cr(VI) adsorption from water. The series of adsorption isotherms were adjusted to modified Langmuir equation. Thermodynamic data of interactions were studied by the calorimetric titration of Cr(VI) in aqueous solution. All liquid/solid interface adsorptions were entalpically and entropically driven. These sawdust samples were also used to remove chromium from tannery wastewater. The application of Caryocar spp.; Manilkara spp.; and Tabebuia spp. reduced the amount of chromium from 2.11 ± 0.18 mg L⁻¹ to 1.15 ± 0.10; 0.29 ± 0.02 and 0.26 ± 0.02 mg L⁻¹, respectively.     

Kinetics and mechanism of interaction of hexaaquachromium(III) with <Emphasis Type="SmallCaps">l</Emphasis>-Dopa in aqueous medium: comparative antiparkinsonian studies

The kinetics and mechanism of the substitution reaction between [Cr(H₂O)₆]³⁺ and l-Dopa in aqueous medium has been studied over the range 1.8 ≤ pH ≤ 2.6, 1.68 × 10⁻² mol dm⁻³ ≤ [Dopa] ≤ 5.04 × 10⁻² mol dm⁻³, I = 0.1 mol dm⁻³ (KNO₃) at 50 °C. The reaction takes place via an outer sphere association between Cr³⁺ and l-Dopa followed by chelation. The product was characterized by physicochemical and infrared spectroscopic methods. The antiparkinsonian activity of the product was found to be higher than that of l-Dopa.     

Determination of trace chromium(VI) in drinking water using X-ray fluorescence spectrometry after solid-phase extraction

A new, simple, and selective method for preconcentration and determination of Cr(VI) in aqueous samples. After adsorption in “batch mode” on Aliquat 336-AC, determinations were made directly on the solid by X-ray fluorescence spectrometry, which had the advantage of not requiring the step of elution of the chromium retained. The enrichment factor was calculated considering that the tablets obtained from 10 mL solution of Cr(VI) (1000 μg L^-1) had a final thickness of 0.64 mm and a diameter of 16.7 mm; the volume deposited on the pellet was 0.14 cm³. The preconcentration factor obtained was 71-fold, which was highly satisfactory for chromium trace analysis by XRF. Finally, the method was successfully applied to the determination of Cr(VI) in drinking water samples.     

Isolation and Characterization of a Novel Thermophilic-Organic Solvent Stable Lipase From <Emphasis Type="Italic">Acinetobacter baylyi</Emphasis>

The benzene tolerant Acinetobacter baylyi isolated from marine sludge in Angsila, Thailand could constitutively secrete lipolytic enzymes. The enzyme was successfully purified 21.89-fold to homogeneity by ammonium sulfate precipitation and gel-permeable column chromatography with a relative molecular mass as 30 kDa. The enzyme expressed maximum activity at 60°C and pH 8.0 with p-nitrophenyl palmitate as a substrate and found to be stable in pH and temperature ranging from 6.0-9.0 to 60-80°C, respectively. A study on solvent stability revealed that the enzyme was highly resisted to many organic solvents especially benzene and isoamyl alcohol, but 40% inhibited by decane, hexane, acetonitrile, and short-chain alcohols. Lipase activity was completely inhibited in the presence of Fe²⁺, Mn²⁺, EDTA, SDS, and Triton X-100 while it was suffered detrimentally by Tween 80. The activity was enhanced by phenylmethylsulfonyl fluoride (PMSF), Na⁺, and Mg²⁺ and no significant effect was found in the presence of Ca²⁺ and Li⁺. Half of an activity was retained by Ba²⁺, Ag⁺, Hg⁺, Ni²⁺, Zn²⁺, and DTT. The enzyme could hydrolyze a wide range of p-nitrophenyl esters, but preferentially medium length acyl chains (C₈-C₁₂). Among natural oils and fats, the enzyme 11-folds favorably catalyzed the hydrolysis of rice bran oil, corn oil, sesame oil, and coconut oil in comparison to palm oil. Moreover, the transesterification activity of palm oil to fatty acid methyl esters (FAMEs) revealed 31.64 ± 1.58% after 48 h. The characteristics of novel A. baylyi lipase, as high temperature stability, organic solvent tolerance, and transesterification capacity from palm oil to FAMEs, indicate that it could be a vigorous biocatalyzer in the prospective fields as bioenergy industry or even in organic synthesis and pharmaceutical industry.     

An Oxidant- and Organic Solvent-Resistant Alkaline Metalloprotease from Streptomyces olivochromogenes

Organic solvent- and detergent-resistant proteases are important from an industrial viewpoint. However, they have been less frequently reported and only few of them are from actinomycetes. A metalloprotease from Streptomyces olivochromogenes (SOMP) was purified by ion exchange with Poros HQ and gel filtration with Sepharose CL-6B. Apparent molecular mass of the enzyme was estimated to be 51 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gelatin zymography. The activity was optimum at pH 7.5 and 50 °C and stable between pH 7.0 and 10.0. SOMP was stable below 45 °C and Ca²⁺ increased its thermostability. Ca²⁺ enhanced while Co²⁺, Cu²⁺, Zn²⁺, Mn²⁺, and Fe²⁺ inhibited the activity. Ethylenediaminetetraacetic acid and ethylene glycol-bis (β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid, but not phenylmethylsulfonyl fluoride, aprotinin, and pefabloc SC, significantly suppressed the activity, suggesting that it might be a metalloprotease. Importantly, it is highly resistant against various detergents, organic solvents, and oxidizing agents, and the activity is enhanced by H₂O₂. The enzyme could be a novel protease based on its origin and peculiar biochemical properties. It may be useful in biotechnological applications especially for organic solvent-based enzymatic synthesis.