Surface-Enhanced Infrared Spectral Investigations of 2,3-Bis(chloromethyl)anthracene-1,4,9,10-tetraone on Copper Nanoparticles

ABSTRACT

Surface-enhanced infrared (IR) absorption spectroscopic technique has been employed to investigate the orientation of 2,3-bis(chloromethyl)anthracene-1,4,9,10-tetraone (BCMAT) on copper nanoparticles (NPs). Copper NPs have been prepared by the chemical reduction method. The observed ring stretching modes show higher downshifts, broader bandwidths, and higher enhancement. The observed features in out-of-plane and in-plane CH deformation modes indicate that the BCMAT molecules may be adsorbed in a “flat-on” orientation on the copper NPs. The observed lower enhancement factor of the in-plane C?O deformation mode and C?O stretching mode and the higher enhancement factor of out-of-plane C?O deformation mode elucidate that the BCMAT molecules are adsorbed on the copper NPs in a “flat-on” orientation. All these observations show that BCMAT is adsorbed on copper NPs through the π-anthraquinone ring system in a “flat-on” orientation.     

Surface enhanced infrared spectral investigation of 2,3-bis(chloromethyl)anthracene-1,4,9,10-tetraone on silver nanoparticles

The size effect of silver nanoparticles on photophysical properties of 2,3-bis(chloromethyl)anthracene-1,4,9,10-tetraone (BCMAT) has been investigated using an IR technique. Silver colloids of different sizes have been prepared by two different methods. Mechanisms for adsorption and complex formation have been elucidated from surface-enhanced infrared absorption spectra. The observation shows that BCMAT is adsorbed on silver nanoparticles through a C = O group and that its orientation is stand-on. Surface enhancement factors have been calculated. As the particles decrease in size their total surface area grows, which leads to the gain in the enhancement factor.     

Study on Synthesis of Silver Nanoparticles Using dsDNA as Template and Detection of GSH

In this work, silver nanoparticles are synthesized using a simple and sensitive method by using double-stranded DNA (dsDNA-Ag NPs) as a template. The prepared dsDNA-Ag NPs are characterized by fluorescence spectroscopy analysis, X-ray photoelectron spectroscopy analysis, and transmission electron microscopy analysis. The excitation wavelength of the prepared silver nanoparticles is 295 nm, the emission wavelength is 377 nm, the average particle size is 11.2 nm, and the dispersion is uniform with pleasurable stability. The nanomaterials are used as fluorescent probes to detect glutathione (GSH). After adding glutathione to the dsDNA-Ag NPs fluorescent probes, the fluorescence of dsDNA-Ag NPs is burst due to electron transfer and S Ag bond generation, and the linear range of detection concentration is 0–90 mm with a detection limit of 0.37 mm .     

Direct functionalization of an optical fiber by a plasmonic nanosensor

We explore a rapid route for fabricating silver nanoparticles (NPs) at the end of an optical fiber. The size and number of silver NPs can be controlled by varying the exposure doses. The effect of the refractive index of different solvents on the extinction spectra have been studied as a proof of concept of a fiber integrated plasmon-based sensor.     

Optical Properties of Micro-patterned Silver Nanoparticle Substrates

In this paper, we describe a novel technique for depositing metal nanoparticles (NPs) on a planar substrate whereby the NPs are micro-patterned on the surface by a simple stamp-printing procedure. The method exploits the attractive force between negatively charged colloidal metal NPs and positively-charged polyelectrolyte layers which have been selectively deposited on the surface. Using this technique, large uniform areas of patterned metal NPs, with different plasmonic properties, were achieved by optimisation of the stamping process. We report the observation of unusual fluorescence emission from these structures. The emission was measured using epifluorescence microscopy. Fluorescence lifetime behaviour was also measured. Furthermore, the μ-patterned NPs exhibited blinking behaviour under 469 nm excitation and the fluorescence spectrum was multi-peaked. It has been established that the fluorescence is independent of the plasmon resonance properties of the NPs. As well as optimising the novel NP μ-patterning technique, this work discusses the origin and characteristics of the anomalous fluorescence behaviour in order to characterise and minimise this unwanted background contribution in the use of metal NPs for plasmonic enhancement of fluorescence for optical biochip applications.     

Characterization and antimicrobial activity of silver nanoparticles prepared by a thermal decomposition technique

Recently, there has been an increasing need of efficient synthetic protocols using eco-friendly conditions including low costs and green chemicals for production of metal nanoparticles. In this work, silver nanoparticles (silver NPs) with average particle size about 10 nm were synthesized by using a thermal decomposition technique. Unlike the colloidal chemistry method, the thermal decomposition method developed has advantages such as the high crystallinity, single-reaction synthesis, and easy dispersion ability of the synthesized NPs in organic solvents. In a modified synthesis process, we used sodium oleate as a capping agent to modify the surface of silver NPs because the oleate has a C₁₈ tail with a double bond in the middle, therefore, forming a kink which is to be effective for aggregative stability. Importantly, the as-synthesized silver NPs have demonstrated strong antimicrobial effects against various bacteria and fungi strains. Electron microscopic studies reveal physical insights into the interaction and bactericidal mechanism between the prepared silver NPs and tested bacteria in question. The observed excellent antibacterial and antifungal activity of the silver NPs make them ideal for disinfection and biomedicine applications.     

Spectral Investigations on N-(2-Methylthiophenyl)-2-Hydroxy-1-Naphthaldimine by Silver Nanoparticles: Quenching

The photo—physical properties of N-(2-methylthiophenyl)-2-hydroxy-1-naphthaldimine (NMTHN) on silver nano particles have been investigated using optical absorption and fluorescence emission techniques. Silver nanoparticles of different sizes have been prepared by two different methods. The increases in size of the silver nanoparticles cause a decrease in the quenching of fluorescence of NMTHN. Stern–Volmer quenching constants and the association constants have also been calculated.     

Nanoplates controlled synthesis and catalytic activities of silver nanocrystals

The silver nanostructures, from nanoparticles (NPs) to nanorod and nanoplate, can be synthesized quantitatively with DMF (N,N^′$N,N^{\prime }$-dimethyl formamide) and PVA (Polyvinyl alcohol). Due to the anisotropic shape feature, the absorption spectra of the nanoplates prove to be quite different from that of spherical NPs. It may be due to the specific interaction between OH groups and Ag+ ions, which affect selective growth of various planes of silver nanocrystals. In addition, the catalytic activity of the obtained different shaped silver nanocrystals for hydrogen production has also been investigated. The silver nanoplates exhibit higher catalytic activities than silver NPs.     

Nucleation and growth of silver nanoshells through copper vapor laser irradiation

Silica core–silver shell, silver nanoshells (NSs), have been synthesized by an innovative laser-based approach. The NSs’ nucleation and growth progressed upon the pulse strikes of a copper vapor laser on a colloidal solution containing silver and silica nanoparticles (NPs). The silver NPs were separately synthesized by ablation of a silver target in deionized water by a 1064 nm Q-switched Nd:YAG laser. The dependence of silver NSs’ growth on the laser exposure time has been systematically studied by UV–VIS absorption spectroscopy technique. Transmission electron microscopy was exploited as well to visually confirm the NSs’ evolution through the process.     

Synthesis and Characterization of Oxazine-doped Silica Nanoparticles for Their Potential Use as Stable Fluorescent Reagents

The synthesis process to obtain silica nanoparticles (NPs) doped with two oxazine dyes, nile blue and cresyl violet, has been investigated using a modification of the reverse micelle microemulsion method and a procedure based on the Stöber method. A micellar medium provided by the non-ionic surfactant Triton X-100 in a hexanol:water mixture and an ethanol:water mixture, have been used to provide the synthesis medium in each case. Tetraethoxysilane has been used as the initiator of the polymerization and condensation reactions after its hydrolysis in basic medium using ammonium hydroxide. Dye-silane precursor NPs have been also synthesized in order to compare their potential advantages against the NPs obtained by the direct encapsulation of the oxazine dyes. Size distribution and fluorescence of the synthesized NPs, which were monitored using Transmision Electron Microscopy (TEM) and a microplate reader, respectively, depend on the molar ratio and total concentration of the reagents involved in the synthesis. NPs obtained using the developed synthesis procedures had sizes below 400 nm in most instances and the best luminescent properties were observed for NPs with sizes ranging from 100 to 300 nm. Lower sizes result in a decrease in the fluorescence intensities of these nanomaterials. Parameters related with the luminescence features of these NPs were calculated in order to compare the feasibility of both synthesis approaches. The repeatability of the reverse-micelle microemulsion procedure performed in different days gave a relative standard deviation of 10% for the fluorescence intensity values.     

Fluorescence Quenching of 1,4-Dihydroxy-2,3-Dimethyl-9,10-Anthraquinone by Silver Nanoparticles: Size Effect

Size effect of silver nano particles on the photophysical properties of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone (DHDMAQ) have been investigated using optical absorption and fluorescence emission techniques. Silver nanoparticles of different sizes have been prepared by Creighton method using magnetic stirrer and ultrasonic field. Quenching of fluorescence of DHDMAQ has been found to increase with decrease in the size of the silver nanoparticles. Stern–Volmer quenching constants have also been calculated.     

Silver aggregates and twofold-coordinated tin centers in phosphate glass: A photoluminescence study

The optical properties of silver species in various oxidation and aggregation states and of tin centers in melt-quenched phosphate glasses have been assessed by optical absorption and photoluminescence (PL) spectroscopy. Glasses containing silver and tin, or either dopant, were studied. Emission and excitation spectra along with time-resolved and temperature-dependent PL measurements were employed in elucidating the different emitting centers observed and investigating on their interactions. In regard to silver, the data suggests the presence of luminescent single Ag⁺ ions, Ag⁺-Ag⁺ and Ag⁺-Ag⁰ pairs, and nonluminescent Ag nanoparticles (NPs), where Ag⁺-Ag⁰→Ag⁺-Ag⁺ energy transfer is indicated. Tin optical centers appear as twofold-coordinated Sn centers displaying PL around 400 nm ascribed to triplet-to-singlet electronic transitions. The optically active silver centers were observed in glasses where 8 mol% of both Ag₂O and SnO, and 4 mol% of Ag₂O were added. Heat treatment (HT) of the glass with the high concentration of silver and tin leads to chemical reduction of ionic silver species resulting in a large volume fraction of silver NPs and the vanishing of silver PL features. Further characterization of such heat-treated glass by transmission electron microscopy and X-ray photoelectron spectroscopy appears consistent with silver being present mainly in nonoxidized form after HT. On the other hand, HT of the glass containing only silver results in the quenching of Ag⁺-Ag⁰ pairs emission that is ascribed to nonradiative energy transfer to Ag NPs due to the positioning of the pairs near the surface of NPs during HT. In this context, an important finding is that a faster relaxation was observed for this nanocomposite in relation to a heat-treated glass containing both silver and tin (no silver pairs) as revealed by degenerate four-wave mixing spectroscopy. Such result is attributed to Ag NP→Ag⁺-Ag⁰ plasmon resonance energy transfer. The data thus indicates that energy transfer between Ag⁺-Ag⁰ pairs and NPs is bi-directional.     

Excimer laser photofragmentation of metallic nanoparticles

Copper nanoparticles (Cu NPs) were prepared by different chemical methods possessing different sizes. While, silver nanoparticles (Ag NPs) were prepared by borohydride reduction method. The influences the changes in sizes of Ag NPs and Cu NPs were demonstrated by the absorption spectra. When Ag NPs and Cu NPs irradiated with 193 and 308 nm excimer laser, respectively; the maximum absorption decreased as the number of pulses increased up to 10 thousands pulse; due to the size reduction. The TEM photography gives good criteria about the size reduction process. Moreover, the mechanism of photofragmentation was described.     

The Toxicity of Silver Nanoparticles Depends on Their Uptake by Cells and Thus on Their Surface Chemistry

A set of three types of silver nanoparticles (Ag NPs) are prepared, which have the same Ag cores, but different surface chemistry. Ag cores are stabilized with mercaptoundecanoic acid (MUA) or with a polymer shell [poly(isobutylene‐alt‐maleic anhydride) (PMA)]. In order to reduce cellular uptake, the polymer‐coated Ag NPs are additionally modified with polyethylene glycol (PEG). Corrosion (oxidation) of the NPs is quantified and their colloidal stability is investigated. MUA‐coated NPs have a much lower colloidal stability than PMA‐coated NPs and are largely agglomerated. All Ag NPs corrode faster in an acidic environment and thus more Ag(I) ions are released inside endosomal/lysosomal compartments. PMA coating does not reduce leaching of Ag(I) ions compared with MUA coating. PEGylation reduces NP cellular uptake and also the toxicity. PMA‐coated NPs have reduced toxicity compared with MUA‐coated NPs. All studied Ag NPs were less toxic than free Ag(I) ions. All in all, the cytotoxicity of Ag NPs is correlated on their uptake by cells and agglomeration behavior.     

Spectral manifestation of surface plasmon resonance of silver nanoparticles upon interaction with water-soluble metalloporphyrins

Absorption and resonant light-scattering spectra of nanoparticles (NPs) of silver, and their complexes with water-soluble Cu(II)-5,10,15,20-tetrakis(4-N-methylpyridinium)-porphyrin (CuTMpyP4) and Fe(II)-5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin (FeTSPP) have been compared. It is shown that in the presence of cationic CuTMpyP4, the band of surface plasmon resonance in the absorption and resonant scattering spectra of silver NPs is shifted to the long-wavelength region that is associated with the agglomeration of the particles caused by the Coulomb attraction between the silver particles and the porphyrin molecules. Addition of anionic FeTSPP to the silver NP solution does not lead to any spectral changes. The observed effect of silver-NP association induced by the cationic porphyrin can be used to develop an optical method for the detection of nanoparticles in solutions.     

Ultrathin silver‐coated gold nanoparticles as suitable substrate for surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) is an extremely powerful tool for the analysis of the composition of bimetallic nanoparticle (BNP) surfaces because of the different adsorption schemes adopted by several molecules on different metals, such as Au and Ag. The preparation of BNPs normally implies a change in the plasmonic properties of the core metal. However, for technological applications it could be interesting to synthesize core–shell structures preserving these original plasmonic properties. In this work, we present a facile method for coating colloidal gold nanoparticles (NPs) in solution with a very thin shell of silver. The resulting bimetallic Au@Ag system maintains the optical properties of gold but shows the chemical surface affinity of silver. The effectiveness of the coating method, as well as the progressive silver enrichment of the outermost part of the Au NPs, has been monitored through the SERS spectra of several species (chloride, luteolin, thiophenol and lucigenin), which show different behaviors on gold and silver surfaces. A growth mechanism of the Ag shell is proposed on the basis of the spectroscopic and microscopic data consisting in the formation and deposit of Ag clusters on the Au NP surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Importance of poly(ethylene glycol) conformation for the synthesis of silver nanoparticles in aqueous solution

Silver nanoparticles (NPs) were prepared using silver nitrate (AgNO₃) as a precursor in an aqueous solution of poly(ethylene glycol) (PEG), which acted as both a reducing and stabilizing agent. The UV/Vis spectra showed that PEG 100 (100 kg/mol) has a remarkable capability to produce silver NPs at 80 °C, but the production of silver NPs by both PEG 2 (2 kg/mol) and PEG 35 (35 kg/mol) was negligible. This difference was explained by the conformation of PEG in the reaction solution: the entangled conformation for PEG 100 and the single-coiled conformation for PEG 2 and PEG 35, which were confirmed by pulse-field-gradient ¹H NMR and viscosity measurements. In an aqueous solution, the entangled conformation of PEG 100 facilitated the reduction reaction by caging silver ions and effectively prevented the agglomeration of formed NPs. The reaction in an aqueous PEG 100 solution was observed to be stable under the conditions of a prolonged reaction time or an increased temperature, while no reduction reaction occurred in the PEG 2 solution. The synthesis of silver NPs by PEG 100 was well controlled to produce fine silver NPs with 3.68 ± 1.03 nm in diameter, the size of which remained relatively constant throughout the reaction.     

Synthesis and characterization of superparamagnetic nanoparticles coated with fluorescent gold nanoclusters

Multifunctional nanoparticles (NPs) combining the superparamagnetism of Mn−Zn ferrite and the fluorescence property of gold nanoclusters (NCs) have been prepared by wet chemistry. Magnetic NPs synthesized by co-precipitation method were coated several times with oppositely charged polyelectrolytes (PEs) using the layer-by-layer technique. Common techniques (Fourier transform infrared spectroscopy, electron microscopy, zeta potential, etc.) indicated the monodispersity and the stability of the coated NPs providing a positive charged surface. Fluorescent gold NCs bound to a standard protein bovine serum albumin were adsorbed on the surface of the magnetic NPs. Structural investigations proved the presence of small gold clusters (~2 nm) in a shell surrounding the magnetic nanomaterial. The stable nanocomposite kept the original fluorescence property of the metal clusters with 211-fold increase of the red emission (λ = 690 nm) compared to the uncoated NPs. These NPs can be moved with a permanent magnet despite a 72-wt% increase of the non-magnetic fraction due to the PE coating and the protein adsorption.     

Synthesis of PMA stabilized silver nanoparticles by chemical reduction process under a two-step UV irradiation

Poly(methacrylic acid) (PMA) stabilized silver nanoparticles (Ag NPs), also used in the surface modification of clothing fibers, were fabricated via chemical reduction processes under UV irradiation. To obtain an uniform size distribution it has been designed a new “two-step” process which employs two different UV radiation densities in order to control the kinetics of NPs nucleation. The as produced nanoparticles were characterized by UV-vis absorption spectroscopy and TEM microscopy. The results show the reduction of the Ag ions and the nanoparticles nucleation in the first step. In the second step, the final Ag NPs size distribution is controlled through a quick cross-linking of the PMA that freezes out any further modification. A narrow size distribution with more than 80% NPs smaller than 10 nm and none larger than 25 nm was obtained and the long-term stability (one month) of the colloidal solution was verified.     

Green synthesis of finely-dispersed highly bactericidal silver nanoparticles via modified Tollens technique

In this article, we represent a versatile and effective technique which using non-toxic chemicals to prepare stable aqueous dispersions of silver nanoparticles (NPs) via modified Tollens process. It was shown that as-prepared silver colloids consisted of finely-dispersed NPs with average diameter about 10 nm and a relatively narrow size distribution. Moreover, they could be stored very stable after several months without observation of aggregates or sedimentation. In comparison with previous works where Tollens process was being used, we for the first time applied UV-irradiation simultaneously with glucose reduction of silver salt through NPs preparation. The colloidal solutions of silver NPs were found to exhibit a high antibacterial activity against gram-negative Escherichia coli. The concentration of silver leading to a complete inhibition of bacteria growth was revealed as low as at 1.0 μg ml⁻¹ and found much lower compared to earlier reports. These advantages of aqueous dispersions of silver NPs make them ideal for green industrial, medicinal, microbiological and other applications.