Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueous solutions: Adsorption isotherm study

Release of heavy metal onto the water and soil as a result of agricultural and industrial activities may pose a serious threat to the environment. In this study, the adsorption behavior of nano hydroxyapatite with respect to Pb²⁺, Cd²⁺ and Ni²⁺ has been studied in order to consider its application to purity metal finishing wastewater. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/L. The uptake capacity and distribution coefficients (K_d) were determined for the adsorption system as a function of sorbate concentration. The Langmuir, Freundlich, and Dubinin–Kaganer–Radushkevich (DKR) isotherms applied for sorption studies showed that the amount of metal sorbed on nano hydroxyapatite. It was found that the adsorption phenomena depend on charge density and hydrated ion diameter. According to the equilibrium studies, the selectivity sequence can be given as Pb²⁺ > Cd²⁺ > Ni²⁺. These results show that nano hydroxyapatite holds great potential to remove cationic heavy metal species from industrial wastewater.     

Influence of metal ions on the interaction between gatifloxacin and calf thymus DNA

To study the interaction between gatifloxacin (GT), metal ions (Cu²⁺, Cd²⁺, Co²⁺, Mg²⁺) and calf thymus DNA under condition of physiology pH, UV absorption and fluorescence methods were adopted. Result shows that metal ions and DNA are able to react with GT in ground state. In further research, by studying the influence of metal ions on binding of GT with DNA in metal ions–GT–DNA ternary system, we found that influential mechanism of Mg²⁺ on the binding of GT with DNA may be different from the other three. Mg²⁺ can act as a bridge in the binding of GT's carboxyl/carbonyl with DNA phosphate in certain concentration range; while Cu²⁺, Cd²⁺, Co²⁺ can combine directly with GT by reaction between GT carboxyl/carbonyl and DNA base, and enhance the binding ability of GT with DNA. The influence extent and type depend not only on the binding site of DNA with metal ions (phosphate or base), but also the binding ability of which. The stronger the binding ability of metal ions with DNA base is, the larger their promotion to binding of GT with DNA is. The order of metal ions’ influential ability on the binding of GT–DNA is identical to the binding ability order of metal ions with DNA base, that is: Cu²⁺ > Cd²⁺ > Co²⁺ > Mg²⁺.     

A voltammetric sensor for simultaneous determination of lead,cadmium and zinc on an activated carbon fiber rod

A simple, low cost and sensitive voltammetric sensor was developed for the simultaneous detection of Pb²⁺, Cd²⁺, and Zn²⁺ based on a disposable carbon fiber rod (CFR). The important factors to enhance the sensing property were creation of a clean surface by dealing with CFR at a high potential and electrochemical deposition of Bi film to improve the accumulation of heavy metal ions.     

Cation distribution in MgxZn1 − x(HCOO)2·2H2O mixed crystals: X-ray diffraction and double matrix infrared spectroscopy

The metal ion distributions at the two metal sites (hexaformate-coordinated Me1 sites and mixed-coordinated Me2 sites) in the title mixed crystals as determined by single crystal X-ray diffraction and double matrix infrared spectroscopic methods are presented and discussed. The mixed formates are isostructural with the end compounds (space group P2₁/c). The local metal ion concentrations as a function of the total metal ion concentrations exhibit a clear preference of Zn²⁺ ions to Me1 sites and the Mg²⁺ ions to Me2 sites.The analysis of the infrared spectra reveals that the spectral regions 2300–2500 cm⁻¹ (ν_OD of matrix-isolated HDO molecules) and 1300–1400 cm⁻¹ (symmetric COO stretching (ν₂) and bending CH (ν₅) modes) are mostly sensitive to the metal ion environment. The inclusion of Mg²⁺ and Zn²⁺ in the structures of Zn(HCOO)₂·2H₂O and Mg(HCOO)₂·2H₂O, respectively, leads to an appearance of new infrared bands corresponding to ν_OD of HDO molecules bonded to the incorporated ions (i.e. new hydrogen bonding systems MgOH₂⋯OCHOZn and ZnOH₂⋯OCHOMg are formed in the mixed formates). The respective new bands are observed at small concentrations of included Mg²⁺ ions (about 5 mol%, x = 0.05) and at considerably higher concentrations of included Zn²⁺ ions (about 30 mol%, x = 0.7). Contrarily, the ν₂ and ν₅ modes caused by the incorporated cations bonded to formate ions occur at x ≥ 0.3 and x ≤ 0.85 (Mg²⁺ ions in Zn(HCOO)₂·2H₂O and Zn²⁺ ions in Mg(HCOO)₂·2H₂O, respectively). Thus, the infrared spectroscopy experiments confirm the single crystal X-ray measurements that the Mg²⁺ ions are localized predominantly at Me2 sites and the Zn²⁺ ions at Me1 sites in the title mixed crystals. The pronounced preference of the Mg²⁺ ions to Me2 sites is owing to the strong affinity of these ions to water molecules.     

Competitive adsorption of toxic heavy metal contaminants by gum kondagogu (Cochlospermum gossypium): A natural hydrocolloid

Gum kondagogu (Cochlospermum gossypium), a naturally occurring tree biopolymer, is exploited as a biosorbent to remove metal ions from aqueous solutions. The removal efficiency of toxic metals by gum kondagogu was determined quantitatively in the order Cd²⁺ > Cu²⁺ > Fe²⁺ > Se²⁺ > Pb²⁺ > total Cr > Ni²⁺ > Zn²⁺ > Co²⁺ > As²⁺ at pH 5.0 ± 0.1 and temperature 25 ± 2 °C by inductively coupled plasma-mass spectrometry (ICP-MS). The biosorption (%) of various metal ions tested was found to be in the range of 97.3–16.7%, at pH 5.0. The morphological and mechanisms of interaction of toxic metal ions with gum kondagogu were assessed by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM-EDXA) and X-ray diffraction (XRD) spectrum. The analysis indicated that biosorption process included morphological changes, precipitation, complexation and ion exchange mechanism for the removal of metal ions by the gum. XRD analysis indicated the amorphous nature of gum kondagogu, which facilitate metal biosorption. The metal ions adsorption leads to its deposition on the gum kondagogu matrix in a crystalline state.     

Amberlite XAD-7 resin impregnated with 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol for enrichment of metal ions

The Amberlite XAD-7 resin modification was carried out by loading 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol (CPDPINP). Subsequently, this new sorbent was applied for the enrichment of metal ions such as Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions. The effect of various parameters on their sorption and following recoveries was studied in column procedure. The preconcentrated ions were eluted by appropriate eluent and their contents were quantified by FAAS. This method has preconcentration factor of 150 and enrichment factor in the range of 20.8–29.1. At optimum values of all variables, the proposed method has linear calibration graphs in the range of 0.01 up to 0.29 μg mL⁻¹ with detection limit (3SDb/m, n = 15) between 1.6 and 2.6 ng mL⁻¹. This protocol is usable for successful analysis of Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions in different matrices with reasonable recoveries (>93%) and acceptable relative standard deviation (<4.7%).     

Simultaneous determination of metal ions as complexes of pentamethylene dithiocarbamate in Indus river water,Pakistan

River water samples before and after mixing with industrial effluents were collected at an interval of 4 weeks for one year and analyzed for simultaneous determination of Fe³⁺, Cr³⁺, Mn²⁺, Cu²⁺, Ni²⁺and Co²⁺ after preconcentration using pentamethylene dithiocarbamate (PMDTC) as derivatizing reagent and subsequent solvent extraction by high performance liquid chromatography (HPLC). The average levels (n = 12) of metal ions were found in the range of 14.2–542 μg/L. The results were then compared with a standard flame atomic absorption spectrophotometric method revealed no significant differences.     

Characterization,EPR and photoluminescence studies of LiAl5O8:Cr phosphors

Red emitting Cr³⁺ doped LiAl₅O₈ powder phosphor was prepared by combustion route using corresponding metal nitrates and urea in a single step. The prepared powder was characterized by X-ray diffraction and surface area measurements were carried out by Brunauer–Emmet–Teller adsorption isotherms. The electron paramagnetic resonance spectrum in the low field regions is typical for isolated Cr³⁺ ions whereas the resonance signal in the high field region with g = 1.95 is due to exchange coupled Cr³⁺–Cr³⁺ pairs. The optical studies show two broad and intense bands characteristic of Cr³⁺ ions in distorted octahedral symmetry. The photoluminescence spectrum gives a narrow red emission at 710 nm corresponding to ²E_g → ⁴A_2g transition upon excitation of 562 nm. The crystal field parameter (Dq), Racah inter-electronic repulsion parameters (B and C) and nephelauxetic parameters have been evaluated and discussed.     

Syntheses,crystal structures and magnetic properties of coordination polymers Ni(NO2)2 and Ni(4,4′-bipy)(NO2)2

Two new coordination polymer frameworks Ni(NO₂)₂ (1) and Ni(4,4′-bipy)(NO₂)₂ (2) (4,4′-bipy = 4,4′-bipyridine) were synthesized by solvothermal reaction in formamide, and were characterized by elemental analysis, IR spectroscopy, single crystal X-ray diffraction, and magnetic measurement. In compound 1, each Ni²⁺ ion is linked with four neighboring Ni²⁺ ions through μ_1,3-nitrito bridges forming 2D layered structure. In compound 2, each Ni²⁺ ion is bridged with six neighboring Ni²⁺ ions through four μ_1,3-nitrito groups and two 4,4′-bipy ligands forming 3D structure. Magnetic measurements show weak ferromagnetism within framework of the two compounds with T_N = 19 K (1) and 21 K (2).     

Transition metal-chelating surfactant micelle templates for facile synthesis of mesoporous silica nanoparticles

Highly ordered mesoporous silica nanoparticles with tunable morphology and pore-size are prepared by the use of a transition metal-chelating surfactant micelle complex using Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions. These metal ions formed a metal-P123 micelle complex in an aqueous solution, while the metal ions are chelated to the hydrophilic domain such as the poly(ethylene oxide) group of a P123 surfactant. The different complexation abilities of the utilized transition metal ions play an important role in determining the formation of nano-sized ordered MSNs due to the different stabilization constant of the metal-P123 complex. Consequently, from a particle length of 1700 nm in the original mesoporous silica materials, the particle length of ordered MSNs through the metal-chelating P123 micelle templates can be reduced to a range of 180–800 nm. Furthermore, the variation of pore size shows a slight change from 8.8 to 6.6 nm. In particular, the Cu²⁺-chelated MSNs show only decreased particle size to 180 nm. The stability constants for the metal-P123 complex are calculated on the basis of molar conductance measurements in order to elucidate the formation mechanism of MSNs by the metal-chelating P123 complex templates. In addition, solid-state ²⁹Si, ¹³C-NMR and ICP-OES measurements are used for quantitative characterization reveal that the utilized metal ions affect only the formation of a metal-P123 complex in a micelle as a template.     

Diffusion of levodopa in aqueous solutions of hydrochloric acid at 25 °C

Ternary mutual diffusion coefficients (D₁₁, D₂₂, D₁₂ and D₂₁) measured by the Taylor dispersion method are reported for aqueous solutions of {levodopa (l-dopa) + HCl} solutions at 25 °C and HCl concentrations up to 0.100 mol · dm⁻³. The coupled diffusion of l-dopa (1) and HCl (2) is significant, as indicated by large negative cross-diffusion coefficients. D₂₁, for example, reaches values that are larger than D₁₁, the main coefficient of l-dopa. Combined Fick and Nernst–Planck equations are used to analyze the proton coupled diffusion of l-dopa and HCl in terms of the binding of H⁺ ions to l-dopa and ion migration in the electric field generated by l-dopa and HCl concentration gradients.     

Dinuclear manganese,iron, chromium,and cobalt complexes derived from aroylhydrazone ligands: Synthetic strategies,crystal structures,and magnetic properties

Coordination clusters of 3d metals continue to attract the intense interest of the scientists from the synthetic inorganic chemistry, bioinorganic chemistry and molecular magnetism communities. We review here the synthetic strategies employed in a continuous effort to obtain new and potentially magnetically interesting dinuclear molecules based on iron, manganese, chromium, and cobalt metal ions. The reported systems are pure homometallic 3d materials. We have focused on describing aspects of the synthesis, the crystal structures and the magnetic behaviour of these coordination compounds with low nuclearity. A deep solid-state and magnetic characterization of these systems has allowed us to gain evidence regarding the role played by weak exchange interactions and geometrical factors on the slow dynamics of the magnetization. In addition, the analysis through ab initio calculations has provided a valuable insight into the influence of organic periphery, bridging ligands, and remote substituents on the exchange coupling constant (J). In the case of a dinuclear complex based on manganese, the largest ferromagnetic interaction between two Mn^III has been observed (J = 19.7 cm⁻¹).     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Electrical conductivity and ion-exchange kinetic studies of polythiophene Sn(VI)phosphate nano composite cation-exchanger

A polymeric hybrid nanocomposite, namely polythiophene tin(IV)phosphate (PTh–SnP), was expediently synthesized by incorporating polythiophene (PTh) in tin phosphate (SnP) to enhance the conducting behavior and sorption of heavy metal ions by porous polymeric cation exchanger. Composite was characterized by Fourier Transform-Infra Red and Transmission Electron Microscopy. The dc electrical conductivity studies carried out on the composite, showed conductivity within the range of 4.0 × 10⁻²–1.0 × 10⁻³ S/cm⁻¹; measured by a 4-in line-probe dc electrical conductivity measuring technique. Ion-exchange kinetics for few divalent metal ions was evaluated by particle diffusion-controlled ion-exchange phenomenon at four different temperatures. The particle diffusion mechanism is confirmed by the linear τ (dimensionless time parameter) vs t (time) plots. The exchange processes thus controlled by the diffusion within the exchanger particle for the systems studies herein. Some physical parameters like self-diffusion coefficient (D₀)_, energy of activation (E_a) and entropy (ΔS°) have been evaluated under conditions favoring a particle diffusion-controlled mechanism.     

Novel simple fluorescent sensor for nickel ions

A novel pyrazoline with benzimidazole substituent was conveniently synthesized, starting from a chalcone and 2-hydrazinylpyridine. The addition of Ni²⁺ to ethanol solution of the synthesized pyrazoline resulted in a rapid color change from blue to green which allows the selective detection of Ni²⁺ ion over a great number of other metal ions. The association constant for the 1:1 complex was determined to be 2.72 × 10⁷ M^?1.     

Chromophoric thin film based on cellulose triacetate blends for sensing metal ions

Chromophoric sensors were made based on 8-hydroxyquinoline immobilized onto a thin film of a polymer blend matrix. The thin films were made by the solution casting method using cellulose triacetate and polyethylene glycol (PEG 600) as plasticizer and pore-forming agent. Different contents of PEG 600 additive were investigated. The prepared films were characterized by FTIR and thermal analysis. The absorption and fluorescence spectra of different films were dependent on the content of PEG 600 with clear quenching of the fluorescence of the film that contains PEG 600 compared to that with zero content. This behavior was attributed to the collective effect of hydrogen bonding (intra- and intermolecular hydrogen bonding) that enhances the process of excited-state proton transfer. This result is favorable to a responsive sensor that shows fluorescence off in the absence of metal ions and fluorescence on upon metal ion chelation. The detection of 5 × 10⁻⁵ M of Al³⁺, Zn²⁺ and thallium (I) in aqueous solution has been observed with the fluorescence method. The result obtained is consistent with the enhancing effect of PEG 600 in the detectability of metal ions. Compared with the detection of Al³⁺ and Zn²⁺, the sensor shows better detection of thallium (I), with clear fluorescence spectra.     

Synthesis,characterization and properties of microporous lanthanide silicates: K8Ln3Si12O32NO3·H2O (Ln = Eu,Tb, Gd,Sm)

A family of microporous lanthanide silicates, K₈Ln₃Si₁₂O₃₂NO₃·H₂O (denoted LnSiO-CJ3, Ln = Eu, Tb, Gd, Sm), was synthesized under mild hydrothermal conditions at 503 K. The X-ray powder diffraction patterns of these compounds reveal that they are isostructural. The structure of EuSiO-CJ3 was determined by single-crystal X-ray diffraction analysis. It crystallizes in triclinic space group P-1 (No. 2) with a = 11.599(2) Å, b = 12.225(2) Å, c = 13.829(3) Å, α = 112.99(3)°, β = 92.05(3)°, γ = 90.57(3)°. The structure is based on [Si₃O₈]_n^4n? layers with 6-, 8-, 12-rings that are connected by EuO₆ octahedra to form a 3-D framework with 8-ring channels along the [001] direction. Charge neutrality is achieved by the K⁺ and NO₃^? ions located in the channels. The framework of EuSiO-CJ3 shows good thermal stability, which can be stable up to 1273 K. Ion-exchange capacity of EuSiO-CJ3 was investigated by the exchange of NO₃^? ions with halide ions (F^?, Cl^?, Br^?). The peaks in the emission spectra of LnSiO-CJ3 (Ln = Eu, Tb) belong to the characteristic transitions of Ln³⁺ (Ln = Eu, Tb) respectively. The lifetime measurements of LnSiO-CJ3 (Ln = Eu, Tb) suggest the presence of three Ln³⁺ (Ln = Eu, Tb) environments, which are consistent with the crystallographic results.     

Development of 1,3a,6a-triazapentalene-labeled enterobactin as a fluorescence quenching sensor of iron ion

1,3a,6a-Triazapentalene (TAP)-labeled enterobactin was developed as an iron ion sensor. 3-Acetylated-TAP was successfully introduced to the catechol ring of enterobactin, a well-recognized siderophore secreted by various Gram-negative bacteria. The fluorescence of TAP-labeled enterobactin decreased gradually as the amount of Fe³⁺ ion as an additive was increased, and 1.2 equiv of Fe³⁺ ion completely quenched the fluorescence. In clear contrast, when other metal ions were used, the fluorescence of TAP-labeled enterobactin remained even at 5.0 equiv.     

Investigation of O7+ swift heavy ion irradiation on molybdenum doped indium oxide thin films

Molybdenum (0.5 at%) doped indium oxide thin films deposited by spray pyrolysis technique were irradiated by 100 MeV O⁷⁺ ions with different fluences of 5×10¹¹, 1×10¹² and 1×10¹³ ions/cm². Intensity of (222) peak of the pristine film was decreased with increase in the ion fluence. Films irradiated with the maximum ion fluence of 1×10¹³ ions/cm² showed a fraction of amorphous nature. The surface microstructures on the surface of the film showed that increase in ion fluence decreases the grain size. Mobility of the pristine molybdenum doped indium oxide films was decreased from ～122 to 48 cm²/V s with increasing ion fluence. Among the irradiated films the film irradiated with the ion fluence of 5×10¹¹ ions/cm² showed relatively low resistivity of 6.7×10^?4 Ω cm with the mobility of 75 cm²/V s. The average transmittance of the as-deposited IMO film is decreased from 89% to 81% due to irradiation with the fluence of 5×10¹¹ ions/cm².