Early short time transient response of finite L-shaped Mindlin plate

The early short time transient response of an L-shaped plate is investigated by the method of reverberation ray matrix (MRRM) and the generalized ray method (GRM). The MRRM and GRM have been successfully used to study the transient elastic wave transmitting in the beams, planar trusses, space frames and infinite layered media. In the present paper, these two methods are extended to investigate the flexural wave propagation in a finite L-shaped Mindlin plate. The reverberation-ray matrix representing the multi-reflected and scattered waves in the L-shaped plate is presented. The rays in the GRM propagating in the L-shaped plate are determined by the shock source and the boundary conditions. From the numerical results, it indicates that the early short time transient responses of L-shaped plate calculated by the MRRM are the same as those by the GRM. The early short time transient acceleration responses are very large, while the early short time transient displacement responses are very small for the L-shaped plate subjected to the unit impulse. Furthermore, the effects of the different shock signals and the plate thickness on the early short time transient responses of the finite L-shaped Mindlin plates are also analyzed.     

ANALYSIS AND EXPERIMENT ON TRANSIENT DYNAMIC RESPONSE IN FINITE MINDLIN PLATE

The transient wave propagation in the finite rectangular Mindlin plate is investigated by the analytical and experimental methods. The generalized ray method (GRM) which has been successfully applied to study the transient responses of beams, planar trusses, space frames and infinite layered media is extended to investigate the transient wave propagation and early short time transient response in finite Mindlin plate. Combining the wave solution, the shock source and the boundary conditions, the ray groups transmitted in the finite rectangular plate can be determined. Numerical simulations and experiments are performed and compared with each other. The results show that the transient wave propagation and early short time transient responses in the finite plate can be studied using the GRM. The early short time transient accelerations are very large for the finite plate subjected to the unit impulse, while the early short time transient displacements are very small. The early short time transient accelerations under the unit impulse are much larger than those under the unit step impulse. The thickness and material characteristics have remarkable effects on the early short time transient responses.     

爆炸冲击下复合材料层合扁球壳的动力屈曲

研究计及横向剪切的复合材料层合扁球壳在爆炸冲击载荷作用下的非线性轴对称动力屈曲问题。通过在复合材料层合扁球壳非线性稳定性的基本方程中增加横向转动惯量项并引入R.H.Cole理论的爆炸冲击力,得到爆炸冲击下复合材料层合扁球壳的动力控制方程,应用Galerkin方法得到用顶点挠度表达的爆炸冲击动力响应方程,并采用Runge-Kutta方法进行数值求解,采用Budiansky-Roth准则确定冲击屈曲的临界载荷,讨论了壳体几何尺寸对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,此方法是可行的。     

Geometrically non-linear transient analysis of laminated,doubly curved shells

A dynamic, shear deformation theory of a doubly curved shell is used to develop a finite element for geometrically non-linear (in the von Karman sense) transient analysis of laminated composite shells. The element is employed to determine the transient response of spherical and cylindrical shells with various boundary conditions and loading. The effect of shear deformation and geometric non-linearity on the transient response is investigated. The numerical results presented here for transient analysis of laminated composite shells should serve as references for future investigations.     

Low-energy impact of adaptive cylindrical piezoelectric–composite shells

A theoretical framework for analyzing low-energy impacts of laminated shells with active and sensory piezoelectric layers is presented, including impactor dynamics and contact law. The formulation encompasses a coupled piezoelectric shell theory mixing first order shear displacement assumptions and layerwise variation of electric potential. An exact in-plane Ritz solution for the impact of open cylindrical piezoelectric–composite shells is developed and solved numerically using an explicit time integration scheme. The active impact control problem of adaptive cylindrical shells with distributed curved piezoelectric actuators is addressed. The cases of optimized state feedback controllers and output feedback controllers using piezoelectric sensors are analyzed. Numerical results quantify the impact response of cylindrical shells of various curvatures including the signal of curved piezoelectric sensors. Additional numerical studies quantify the impact response of adaptive cylindrical panels and investigate the feasibility of actively reducing the impact force.     

Buckling and Postbuckling of Laminated Thin Cylindrical Shells under Hygrothermal Environments

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｌａｍｉｎａｔｅｄｓｈｅｌｌｓｔｒｕｃｔｕｒｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅａｅｒｏｓｐａｃｅ ,ｍａｒｉｎｅｉｎｄｕｓｔｒｙ ,ａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙａｎｄｏｔｈｅｒｅｎｇｉｎｅｅｒｉｎｇａｐｐｌｉｃａｔｉｏｎｓ.Ｄｕｒｉｎｇｔｈｅｏｐｅｒａｔｉｏｎａｌｌｉｆｅ ,ｔｈｅｖａｒｉａｎｃｅｏｆｔｅｍｐｅｒａｔｕｒｅａｎｄｍｏｉｓｔｕｒｅｒｅｄｕｃｅｓｔｈｅｅｌａｓｔｉｃｍｏｄｕｌｉ…     

矩形脉冲作用下复合材料层合扁球壳的冲击屈曲分析

研究了计及横向剪切的复合材料层合扁球壳在矩形脉冲载荷作用下的非线性动力屈曲问题;采用Galerkin方法得到以顶点挠度表达的动力响应方程,并用Runge-Kutta方法进行数值求解,应用Budiansky-Roth准则(简称B-R准则)确定冲击屈曲的临界荷载;讨论了壳体几何尺寸和物理参数对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,该方法是可行的.     

Nonlinear Theory of Dynamic Stability for Laminated Composite Cylindrical Shells

ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎｃｏｍｐｏｓｉｔｅｃｙｌｉｎｄｒｉｃａｌｓｈｅｌｌｓａｒｅｕｎｄｅｒｔｈｅａｃｔｉｏｎｏｆｄｙｎａｍｉｃｌｏａｄｉｎｇ ,ｔｈｅｙｍａｙｆａｌｌｉｎｄｙｎａｍｉｃｂｕｃｋｌｉｎｇｏｒｄｙｎａｍｉｃｉｎｓｔａｂｉｌｉｔｙ .Ｉｆｔｈｅｄｙｎａｍｉｃｌｏａｄｉｓｓｕｄｄｅｎｌｙａｐｐｌｉｅｄ ,ｏｒｉｔｉｓｃｈａｎｇｉｎｇｉｎｓｔａｎｔａｎｅｏｕｓｌｙ ,ｓｕｃｈａｓｉｍｐｕｌｓｉｖｅｌｏａｄｉｎｇ ,ｔｈｅｎ ,ｄｙｎａｍｉｃｂｕｃｋｌｉｎｇｗｉｌｌｈａｐｐｅｎｆｏｒｔｈｅｓｈ…     

Torsional buckling of cross-ply laminated orthotropic composite cylindrical shells subject to dynamic loading

This study considers torsional buckling of cross-ply laminated orthotropic composite cylindrical thin shells under loads, which is a power function of time. The modified Donnell type dynamic stability and compatibility equations are obtained first. These equations are subsequently reduced to a time dependent differential equation with variable coefficients by using Galerkin's method. The critical parameters are found analytically by applying the Ritz type variational method. According to theoretical solutions, numerical analyses are done.     

DYNAMIC RESPONSE OF LAMINATED ORTHOTROPIC SPHERICAL SHELLSINCLUDING TRANSVERSE SHEAR DEFORMATION AND ROTATORY INERTIA

（杨宜谦）（马和中）（王俊奎）ＤＹＮＡＭＩＣＲＥＳＰＯＮＳＥＯＦＬＡＭＩＮＡＴＥＤＯＲＴＨＯＴＲＯＰＩＣＳＰＨＥＲＩＣＡＬＳＨＥＬＬＳＩＮＣＬＵＤＩＮＧＴＲＡＮＳＶＥＲＳＥＳＨＥＡＲＤＥＦＯＲＭＡＴＩＯＮＡＮＤＲＯＴＡＴＯＲＹＩＮＥＲＴＩＡ￥Ｙａｎｇ...     

复合材料旋转壳自由振动分析的新方法

提出了一种半解析区域分解法来分析任意边界条件的复合材料层合旋转壳自由振动. 沿壳体旋转轴线将壳体分解为一些自由的层合壳段, 视位移边界界面为一种特殊的分区界面;采用分区广义变分和最小二乘加权残值法将壳体所有分区界面上的位移协调方程引入到壳体的能量泛函中, 使层合壳的振动分析问题归结为无约束泛函变分问题. 层合壳段位移变量采用Fourier 级数和Chebyshev 多项式展开. 以不同边界条件的层合圆柱壳、圆锥壳及球壳为例, 采用区域分解法分析了其自由振动, 并将计算结果与其他文献值进行了对比. 算例表明, 该方法具有高效率、高精度和收敛性好等优点.     

Calculation of energy release rate in composite delaminated cylindrical shells under circumferential concentrated dynamic load

The delamination growth may occur in delaminated cylindrical shells subjected to external dynamic load and it will further cause structural failure. Based on the variational principle of moving boundary and considering the contact effect between delamination regions, in this paper, the nonlinear governing equations for the delaminated cylindrical shells under the action of circumferential concentrated dynamic load are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of the delamination sizes and depths, the geometrical parameters, the material properties and the laminate stacking sequences on delamination growth are discussed.     

考虑横向剪切变形和旋转惯性的层合正交异性球壳的动态响应

本文建立了计及横向剪切变形的旋转惯性的复合材料轴对称层合圆柱正交异性球壳的运动方程。在此基础上，用有限差分法计算了球壳在轴对称动力载荷下的动态响应，并讨论了材料参数、结构参数和横向剪切变形的影响。     

层状纤维圆柱壳轴向压缩破损实验研究

通过对端部引发缺陷层状纤维复合材料圆柱壳在轴向准静态和冲击压缩下的实验研究,分析其渐进压缩破损模式和破坏模式的形成机理．研究此类结构的缓冲性能．实验研究表明随着纤维铺设角度的改变其破损模式的主导形式与分层扩展强度、环向断裂强度和纤维与基体脱胶裂纹相关．它们的断裂韧度的高低决定结构的能量吸收能力     

Delamination growth of laminated composite cylindrical shells

The local buckling may occur in delaminated cylindrical shells under axial compression. This often causes delamination growth and structure failure. Based on the variational principle of moving boundary, in this paper, the postbuckling governing equations for the laminated cylindrical shells are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of delamination sizes and depths, the boundary conditions, the material properties and the laminate stacking sequences on delamination growth are discussed.     

复合材料层合加肋板中的瞬态波传播

研究复合材料加肋层合板结构受冲击载荷作用下的瞬态波传播.加肋层合板模型被处理成层合板的弯曲运动与层合梁的扭转与弯曲运动的耦合连续模型.通过Laplace变换,并采用回传射线矩阵法(MRRM),基于一阶剪切变形层合板理论,确定复合材料加肋层合板结构中传播的各条射线群.采用FFT变换,计算各种冲击载荷作用下加肋层合板结构的短时瞬态响应,并分析讨论脉冲类型对加肋层合板结构短时瞬态响应的影响.     

黏弹性层合圆柱壳的临界轴压分析

基于经典屈曲理论,研究了轴向受压黏弹性复合材料层合圆柱壳的临界屈曲载荷. 利用Boltzmann线性积分型本构关系描述铺设单层的各向异性黏弹性行为. 结合解析与数值 方法,由Donnell型屈曲控制方程以及边界条件的Laplace变换导出相空间的特征方程,根 据Laplace逆变换的极值定理,获得层合圆柱壳的瞬时弹性临界载荷与持久临界载荷. 针对 多组铺设方式,通过数值算例重点分析了临界载荷随铺设角的变化特征,两种临界载荷的峰 值点差异程度与铺设方式、几何参数以及材料类型的关系,得到了一些对黏弹性层合圆柱壳 的优化设计有参考价值的结论.     

Torsional postbuckling characteristics of functionally graded graphene enhanced laminated truncated conical shell with temperature dependent material properties

Buckling and postbuckling characteristics of laminated graphene-enhanced composite (GEC) truncated conical shells exposed to torsion under temperature conditions using finite element method (FEM) simulation are presented in this study. In the thickness direction, the GEC layers of the conical shell are ordered in a piece-wise arrangement of functionally graded (FG) distribution, with each layer containing a variable volume fraction for graphene reinforcement. To calculate the properties of temperature-dependent material of GEC layers, the extended Halpin-Tsai micromechanical framework is used. The FEM model is verified via comparing the current results obtained with the theoretical estimates for homogeneous, laminated cylindrical, and conical shells, the FEM model is validated. The computational results show that a piece-wise FG graphene volume fraction distribution can improve the torque of critical buckling and torsional postbuckling strength. Also, the geometric parameters have a critical impact on the stability of the conical shell. However, a temperature rise can reduce the crucial torsional buckling torque as well as the GEC laminated truncated conical shell's postbuckling strength.     

Buckling behavior of compression-loaded composite cylindrical shells with reinforced cutouts

Results from a numerical study of the response of thin-walled compression-loaded quasi-isotropic laminated composite cylindrical shells with unreinforced and reinforced square cutouts are presented. The effects of cutout reinforcement orthotropy, size, and thickness on the non-linear response of the shells are described. A high-fidelity non-linear analysis procedure has been used to predict the non-linear response of the shells. The analysis procedure includes a non-linear static analysis that predicts stable response characteristics of the shells and a non-linear transient analysis that predicts unstable dynamic buckling response characteristics. The results illustrate the complex non-linear response of a compression-loaded shell with an unreinforced cutout. In particular, a local buckling response occurs in the shell near the cutout and is caused by a complex non-linear coupling between local shell-wall deformations and in-plane destabilizing compression stresses near the cutout. In general, reinforcement around a cutout in a compression-loaded shell can retard or eliminate the local buckling response near the cutout and increase the buckling load of the shell. However, results are presented that show how certain reinforcement configurations can cause an unexpected increase in the magnitude of local deformations and stresses in the shell and cause a reduction in the buckling load. Specific cases are presented that suggest that the orthotropy, thickness, and size of a cutout reinforcement in a shell can be tailored to achieve improved buckling response characteristics.     

Thermomechanical postbuckling of composite laminated cylindrical shells with local geometric imperfections

The effect of local geometric imperfections on the buckling and postbuckling of composite laminated cylindrical shells subjected to combined axial compression and uniform temperature loading was investigated. The two cases of compressive postbuckling of initially heated shells and of thermal postbuckling of initially compressed shells are considered. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of the nonlinear prebuckling deformation, the nonlinear large deflection in the postbuckling range and the initial geometric imperfection of the shell. The analysis uses a singular perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of cross-ply laminated cylindrical shells with or without initial local imperfections, from which results for isotropic cylindrical shells follow as a limiting case. Typical results are presented in dimensionless graphical form for different parameters and loading conditions.