Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

An electrochemical study of the oxidation of hydrogen at platinum electrodes in several room temperature ionic liquids

The electrochemical oxidation of dissolved hydrogen gas has been studied in a range of room-temperature ionic liquids (RTILs), namely [C(2)mim][NTf(2)], [C(4)mim][NTf(2)], [N(6,2,2,2)][NTf(2)], [P(14,6,6,6)][NTf(2)], [C(4)mpyrr][NTf(2)], [C(4)mim][BF(4)], [C(4)mim][PF(6)], [C(4)mim][OTf], and [C(6)mim]Cl on a platinum microdisk electrode of diameter 10 microm. In all cases, except [C(6)mim]Cl, a broad quasi-electrochemically reversible oxidation peak between 0.3 to 1.3 V vs Ag was seen prior to electrode activation ([C(6)mim]Cl showed an almost irreversible wave). When the electrode was pre-anodized ("activated") at 2.0 V vs Ag for 1 min, the peak separations became smaller, and the peak shape became more electrochemically reversible. It is thought that the electrogenerated protons chemically combine with the anions (A-) of the RTIL. The appearance and position of the reverse (reduction) peak on the voltammograms is thought to depend on three factors: (1) the stability of the protonated anion, HA, (2) the position of equilibrium of the protonation reaction HA<==> H+ + A- , and (3) any follow-up chemistry, e.g., dissociation or reaction of the protonated anion, HA. This is discussed for the five different anions studied. The reduction of HNTf(2) was also studied in two [NTf(2)]- -based RTILs and was compared to the oxidation waves from hydrogen. The results have implications for the defining of pKa in RTIL media, for the development of suitable reference electrodes for use in RTILs, and in the possible amperometric sensing of H2 gas.     

Spectroscopic and electrochemical studies of U(IV)-hexachloro complexes in hydrophobic room-temperature ionic liquids [BuMeIm][Tf2N] and [MeBu3N][Tf2N

The behavior of U(IV) octahedral complexes [cation]2[UCl6], where the [cation]+ is [BuMeIm]+ and [MeBu3N]+, is studied using UV/visible spectroscopy, cyclic staircase voltammetry, and rotating disk electrode voltammetry in hydrophobic room-temperature ionic liquids (RTILs) [BuMeIm][Tf2N] and [MeBu3N][Tf2N], where BuMeIm+ and MeBu3N+ are 1-butyl-3-methylimidazolium and tri-n-butylmethylammonium cations, respectively, and Tf2N- is the bis(trifluoromethylsulfonyl)imide anion. The absorption spectra of [cation]2[UCl6] complexes in the RTIL solutions are similar to the diffuse solid-state reflectance spectra of the corresponding solid species, indicating that the octahedral complex UCl6(2-) is the predominant chemical form of U(IV) in Tf2N--based hydrophobic ionic liquids. Hexachloro complexes of U(IV) are stable to hydrolysis in the studied RTILs. Voltammograms of UCl(6)2- at the glassy carbon electrode in both RTILs and at the potential range of -2.5 to +1.0 V versus Ag/Ag(I) reveal the following electrochemical couples: UCl6-/UCl6(2-) (quasi-reversible system), UCl(6)2-/UCl6(3-) (quasi-reversible system), and UCl(6)2-/UCl6(Tf2N)x-3+x (irreversible reduction). The voltammetric half-wave potential, Ep/2, of the U(V)/U(IV) couple in [BuMeIm][Tf2N] is positively shifted by 80 mV compared with that in [MeBu3N][Tf2N]. The positive shift in the Ep/2 value for the quasi-reversible U(IV)/U(III) couple is much greater (250 mV) in [BuMeIm][Tf2N]. Presumably, the potential shift is due to the specific interaction of BuMeIm+ with the uranium-hexachloro complex in ionic liquid. Scanning the negative potential to -3.5 V in [MeBu3N][Tf2N] solutions of UCl6(2-) reveals the presence of an irreversible cathodic process at the peak potential equal to -3.12 V (at 100 mV/s and 60 degrees C), which could be attributed to the reduction of U(III) to U(0).     

The glass transition and the distribution of voids in room-temperature ionic liquids: a molecular dynamics study

The glass transition in prototypical room temperature ionic liquids has been investigated by molecular dynamics simulations based on an Amber-like empirical force field. Samples of [C(4)mim][PF(6)], [C(4)mim][Tf(2)N], and [C(3)mim][Tf(2)N] have been quenched from the liquid phase at T = 500 to a glassy state at T ～ 0 K in discontinuous steps of 20 K every 1.2 ns. The glass temperature estimated by simulation (T(g) = 209 K for [C(4)mim][PF(6)], T(g) = 204 K for [C(4)mim][Tf(2)N], and T(g) = 196 K for [C(3)mim][Tf(2)N]) agrees semi-quantitatively with the experimental values (T(g) = 193÷196 K for [C(4)mim][PF(6)], T(g) = 186÷189 K for [C(4)mim][Tf(2)N], and T(g) = 183 K for [C(3)mim][Tf(2)N]). A model electron density is introduced to identify voids in the system. The temperature dependence of the size distribution of voids provided by simulation reproduce well the experimental results of positron annihilation lifetime spectroscopy reported in G. Dlubek, Y. Yu, R. Krause-Rehberg, W. Beichel, S. Bulut, N. Pogodina, I. Krossing, and Ch. Friedrich, J. Chem. Phys. 133, 124502 (2010), with only one free parameter needed to fit the experimental data.     

Fluorescence correlation spectroscopy evidence for structural heterogeneity in ionic liquids

In this work, we provide new experimental evidence for chain length-dependent self-aggregation in room temperature ionic liquids (RTILs) using fluorescence correlation spectroscopy (FCS). In studying a homologous series of N-alkyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl) imide, [C(n)MPy][Tf(2)N] RTILs of varying alkyl chain length (n = 3, 4, 6, 8, and 10), biphasic rhodamine 6G solute diffusion dynamics were observed; both the fast and slow diffusion coefficients decreased with increasing alkyl chain length, with the relative contribution from slower diffusion increasing for longer-chain [C(n)MPy][Tf(2)N]. We propose that the biphasic diffusion dynamics originate from self-aggregation of the nonpolar alkyl chains in the cationic [C(n)MPy](+).     

An effective method for enhancing metal-ions' selectivity of ionic liquid-based extraction system: Adding water-soluble complexing agent

Selective extraction-separation of yttrium(III) from heavy lanthanides into 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)mim][PF(6)]) containing Cyanex 923 was achieved by adding a water-soluble complexing agent (EDTA) to aqueous phase. The simple and environmentally benign complexing method was proved to be an effective strategy for enhancing the selectivity of [C(n)mim][PF(6)]/[Tf(2)N]-based extraction system without increasing the loss of [C(n)mim](+).     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

Ionic liquids as a convenient new medium for the catalytic asymmetric dihydroxylation of olefins using a recoverable and reusable osmium/ligand

The use of room-temperature ionic liquids (RTILs) in the Sharpless catalytic asymmetric dihydroxylation (AD) as a cosolvent or replacement of the tert-butanol was studied in detail by screening 11 different RTILs. The AD reaction is faster in 1-n-butyl-3-methylimidazolium hexafluorophosphate [C(4)mim][PF(6)] as a cosolvent than in the conventional system of tert-butanol/H(2)O. For the range of six substrates tested, comparable or even higher yields and enantiomeric excess (ee) were found using [C(4)mim][PF(6)] or 1-n-octyl-3-methylimidazolium hexafluorophosphate [C(8)mim][PF(6)] compared to the conventional solvent system. Due to high affinity of the catalytic osmium/quiral ligand system to the ionic liquid, the use of ionic liquid/water (biphasic) or ionic liquid/water/tert-butanol (monophasic) solvent systems provides a recoverable, reusable, robust, efficient, and simple system for the AD reaction. Using 1-hexene and [C(4)mim][PF(6)] as RTIL it was possible to reuse the catalytic system for 9 cycles with only a 5% of yield reduction from the first cycle, allowing an overall yield of 87%, TON = 1566, and with similar ee. Additionally, for each cycle, after extraction of the reaction mixture with diethyl ether, the osmium content in the organic phase (containing the AD product) and in the aqueous phase was in the range of the detection limit (相似文献   

Nanostructural organization and anion effects on the temperature dependence of the optical Kerr effect spectra of ionic liquids

The intermolecular spectra of three imidazolium ionic liquids were studied as a function of temperature by the use of optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids comprise the 1,3-pentylmethylimidazolium cation ([C(5)mim]+), and the anions, bromide (Br-), hexafluorophosphate (PF(6)-), and bis(trifluoromethanesulfonyl)imide (NTf(2)-). Whereas the optical Kerr effect (OKE) spectrum of [C(5)mim][NTf(2)] is temperature-dependent, the OKE spectra of [C(5)mim]Br and [C(5)mim][PF6] are temperature-independent. These results are surprising in light of the fact that the bulk densities of these room temperature ionic liquids (RTILs) are temperature-dependent. The temperature independence of the OKE spectra and the temperature dependence of the bulk density in [C(5)mim]Br and [C(5)mim][PF(6)] suggest that there are inhomogeneities in the densities of these liquids. The existence of density inhomogeneities is consistent with recent molecular dynamics simulations that show RTILs to be nanostructurally organized with nonpolar regions arising from clustering of the alkyl chains and ionic networks arising from charge ordering of the anions and imidazolium rings of the cations. Differences in the temperature dependences of the OKE spectra are rationalized on the basis of the degree of charge ordering in the polar regions of the RTILs.     

Non-classical diffusion in ionic liquids

In this study the diffusion coefficient of neutral and cationic ferrocenyl-derivatives have been characterised in a range of 1-alkyl-3-methylimidazolium ionic liquids of the general form [C(n)C(1)Im](+)[X](-). The electrochemistry of ferrocene, 1-ferrocenylmethylimidazole (FcC(1)Im), 1-ferrocenylmethylimidazolium bis(trifluoromethanesulfonyl)imide ([FcC(1)C(1)Im][Tf(2)N]) and N,N,N,N-trimethylferrocenyl-methylammonium bis(trifluoromethanesulfonyl)imide ([FcC(1)NMe(3)][Tf(2)N]), in 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(2)C(1)Im][Tf(2)N]) was investigated. It was shown that the diffusion coefficients of each were not significantly affected by the presence and location of a positive charge on the ferrocenyl-derivative, suggesting that coulombic solvent-solute interactions did not hinder motion of these species in ionic liquids. The diffusion coefficients for [FcC(1)C(1)Im][Tf(2)N] in five [C(n)C(1)Im][X] ionic liquids were determined as a function of temperature and the data shown to disobey the Stokes-Einstein equation. This observation is consistent with the fact that ionic liquids are glass formers, systems in which non-Stokesian behaviour is well documented. Measured diffusion coefficient data was used to determine correlation length in the ionic liquid and was found to correlate with the average size of holes, or voids, within the ionic liquid. This interpretation suggests that a model by which a migrating species can jump between voids or holes within the liquid is highly appropriate and is consistent with the observed behaviour measured across a range of temperatures.     

Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

苄基功能化离子液体对有机磷和苯环化合物的分散液-液微萃取性能研究

以苄基功能化的离子液体1-苄基-3-甲基咪唑双三氟甲烷磺酰亚胺(1-Benzyl-3-methylimidazolium bis [(trifluoromethyl)sulfonyl]imide,[BeMIM][Tf2 N])作为分散液-液微萃取的萃取剂,与高效液相色谱联用,用于环境水样中5种有机磷农药(辛硫磷、杀螟松、毒死蜱、甲拌磷和对硫磷)以及2种苯环化合物(氯化萘和蒽)的萃取与富集。并与其它离子液体([OMIM][Tf2 N])以及普通有机溶剂(CCl4和 C2 Cl4)的萃取效能进行了对比。萃取优化条件为：40μL [BeMIM][Tf2 N]作为萃取剂,1 mL 甲醇作为分散剂,离心时间5 min,样品溶液中不添加盐。在优化的条件下,本方法的线性关系良好(R2=0.9994~0.9998);对10,40和100μg/ L 不同添加浓度重复测定5次的日内和日间 RSD 分别为1.1%~4.3%和0.8%~4.8%,LOD 为0.01~1.0μg/ L (S/ N=3)。将本方法用于3种实际水样中目标分析物的测定,加标回收率和 RSD 分别为82.7%~118.3%和0.7%~5.6%。由于在咪唑环上引入了苄基基团,[BeMIM][Tf2 N]与目标分析物之间除存在疏水作用外,还存在π-π作用,故对目标物的萃取效率明显提高,富集倍数和回收率分别高达339和81.4%。测定了分析物在[BeMIM][Tf2 N]-DLLME 体系中的分配系数,对萃取机制进行初步探讨。     

Electrochemical oxidation of nitrite and the oxidation and reduction of NO2 in the room temperature ionic liquid [C2mim][NTf2

The electrochemical oxidation of potassium nitrite has been studied in the room temperature ionic liquid (RTIL) [C2mim][NTf2] by cyclic voltammetry at platinum electrodes. A chemically irreversible oxidation peak was observed, and a solubility of 7.5(+/-0.5) mM and diffusion coefficient of 2.0(+/-0.2)x10(-11) m2 s(-1) were calculated from potential step chronoamperometry on the microdisk electrode. A second, and sometimes third, oxidation peak was also observed when the anodic limit was extended, and these were provisionally assigned to the oxidation of nitrogen dioxide (NO2) and nitrate (NO3-), respectively. The electrochemical oxidation of nitrogen dioxide gas (NO2) was also studied by cyclic voltammetry in [C2mim][NTf2] on Pt electrodes of various size, giving a solubility of ca. 51(+/-0.2) mM and diffusion coefficient of 1.6(+/-0.05)x10(-10) m2 s(-1) (at 25 degrees C). It is likely that NO2 exists predominantly as its dimer, N2O4, at room temperature. The oxidation mechanism follows a CE process, which involves the initial dissociation of the dimer to the monomer, followed by a one-electron oxidation. A second, larger oxidation peak was observed at more positive potentials and is thought to be the direct oxidation of N2O4. In addition to understanding the mechanisms of NO2- and NO2 oxidations, this work has implications in the electrochemical detection of nitrite ions and of NO2 gas in RTIL media, the latter which may be of particular use in gas sensing.     

Abrasive Stripping Voltammetry in Room Temperature Ionic Liquids

We report on the abrasive stripping voltammetry (AbrSV) of six different solid compounds of widely different natures in room temperature ionic liquids (RTILs). Copper as a metal representative, Prussian blue as a typical inorganic complex, indigo as an organic dye model, and anthracene, pyrene, and 9,10‐diphenylanthracene as the typical representatives of aromatic hydrocarbons were chosen in this study. They were immobilized on a gold electrode surface by mechanical abrasion and their subsequent voltammetric measurements were carried out in the ionic liquid [C₄mim][NTf₂], 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide. The present work demonstrates that RTILs provide an excellent electrochemical solvent environment for abrasive stripping voltammetric analysis; in particular, the much wider potential windows in RTILs as compared to aqueous media greatly enhance the analytical applicability of the AbrSV technique.     

Water-clustering in hygroscopic ionic liquids-an implicit solvent analysis

Most ionic liquids are known to be hygroscopic to varying degrees, and that can be detrimental or useful depending upon the application in question. Water can accumulate slowly over hours or days to saturation levels corresponding to the humidity level. When designing or deploying a new ionic liquid it is important to be able to estimate its maximum moisture absorbing ability at the temperature and pressure of its operation. With this goal in mind we have carried out computational studies on three ionic liquid systems based on [BF(4)](-), [PF(6)](-), and [Tf(2)N](-) anions and 1-alkyl-3-methyl-imidazolium ([C(n)mim](+)) cations within an implicit solvent formalism. For highly hygroscopic systems like [C(n)mim][BF(4)] we find that non-iterative calculations with single water molecules can lead to significant underestimation of the maximum moisture content, while iterative calculations can result in miscibility behavior qualitatively different from experimental observations. On the other hand, the inclusion of small hydrogen-bonded water-clusters up to an appropriately chosen size is shown to yield better quantitative agreements with experimentally observed water uptake. Additionally, such calculations appear consistent with a number of thermodynamically interesting phase behaviors, including limited-solubility to full-miscibility transitions as a function of temperature and as a function of the alkyl chain length of the imidazolium cation. For hydrophobic systems like [C(n)mim][PF(6)] and [C(n)mim][Tf(2)N] the computed solubility (for each n) is found to have a smooth convergence behavior as a function of the largest cluster-size considered with the results for the larger clusters being close to that obtained by iterative calculations with single water molecules.     

Uranyl complexation by chloride ions. Formation of a tetrachlorouranium(VI) complex in room temperature ionic liquids [Bmim][Tf2N] and [MeBu3N][Tf2N

The tetrachlorouranium(VI) complex is formed in [Bmim][Tf2N] and [MeBu3N][Tf2N] from a uranium(VI) solution in the presence of a stoichiometric quantity of chloride ions. The [UVIO2Cl4]2- absorption and emission spectra show bands splitting in comparison with the [UVIO2]2+ spectra, as observed in the solid state, organic solvents, and chloroaluminate-based ionic liquids. The fluorescence lifetime of [UO2Cl4]2- in [MeBu3N][Tf2N] is 0.7 +/- 0.1 mus. The reduction potential of this complex is -1.44 and -1.8 V vs Ag/Ag+ respectively in [Bmim][Tf2N] and [MeBu3N][Tf2N] and does not depend on the chloride concentration. The mechanism proposed for the redox process is a monoelectronic reduction to form [UVO2Cl4]3-, followed by a chemical reaction. The tetrachlorouranium(V) complex seems more stable in [Bmim][Tf2N] than in [MeBu3N][Tf2N]. The electrochemical analysis put in evidence specific interactions of the ionic liquid cation with the uranium anionic species.     

Comparison of dansylated aminopropyl controlled pore glass solvated by molecular and ionic liquids

We compare how (i) four ionic liquids (ILs) (1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpy][Tf2N]), and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P(C6)3C14][Tf2N])) and (ii) two conventional molecular liquids (methanol and 1-octanol) solvate/wet luminescent organic moieties that are covalently attached to the surface of silica controlled pore glass (CPG). A series of aminopropyl CPG particles that have been covalently tagged with the solvatochromic fluorescent probe group dansyl were used in this study. The results demonstrate that ILs solvate/wet the silica surface differently in comparison to molecular liquids (MLs). Specifically, when comparing ILs and MLs that appear to solvate the free probe, dansylpropylsulfonamide (DPSA), equally in solution, we find that ILs do not solvate/wet the silica surfaces as well as the corresponding MLs. The cation component in these ILs is the significant factor in how the ILs solvate/wet silica surfaces. Solvation/wetting of surface-bound species at a silica surface depends on the cation size. Chlorosilane end-capping of the surface silanol and amine residues attenuates the cation's affects.     

Preparation and characterization of new room temperature ionic liquids

A new series [C(n)O(m )mim][X] of imidazolium cation-based room temperature ionic liquids (RTILs), with ether and alcohol functional groups on the alkyl side-chain has been prepared. Some physical properties of these RTILs were measured, namely solubility in common solvents, viscosity and density. The solubility of LiCl, HgCl(2) and LaCl(3) in room temperature ionic liquids was also determined. The features of the solid-liquid phase transition were analysed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. These properties were compared with those reported for the 1-n-alkyl-3-methylimidazolium [C(n )mim][X] series. While the density and solid-liquid phase transition properties are similar for both series, the new RTILs present a considerably lower viscosity and an increased ability to dissolve HgCl(2) and LaCl(3) (up to 16 times higher).     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.