Lipophilicity Modulations by Fluorination Correlate with Membrane Partitioning

Bioactive compounds generally need to cross membranes to arrive at their site of action. The octanol-water partition coefficient (lipophilicity, logP_OW) has proven to be an excellent proxy for membrane permeability. In modern drug discovery, logP_OW and bioactivity are optimized simultaneously, for which fluorination is one of the relevant strategies. The question arises as to which extent the often subtle logP modifications resulting from different aliphatic fluorine-motif introductions also lead to concomitant membrane permeability changes, given the difference in molecular environment between octanol and (anisotropic) membranes. It was found that for a given compound class, there is excellent correlation between logP_OW values with the corresponding membrane molar partitioning coefficients (logK_p); a study enabled by novel solid-state ¹⁹F NMR MAS methodology using lipid vesicles. Our results show that the factors that cause modulation of octanol-water partition coefficients similarly affect membrane permeability.     

Stability of bivalent metal complex with L-hydroxyproline

Potentiometric titration of L-hydroxyproline with NaOH solution at 30° ±0.1°C in a medium of constant ionic strenth, =0.1M (KNO₃) gave the stepwise formation constants of the complexes formed between Mn(II), Co(II) and Zn(II) ions. The values were logK ₁=3.45; logK ₁=4.58, logK ₂=4.03; logK ₁=5.08, logK ₂=4.66; for Mn(II), Co(II) and Zn(II) complexes. The order of stability constant is in accordance with theIrving-Williams series.

---

Die Stabilität bivalenter metall-komplexe mit L-hydroxyprolin

Zusammenfassung Potentiometrische Titration von L-Hydroxyprolin in NaOH-Lösung bei 30±0,1°C und einer konstanten Ionenstärke von =0,1M-KNO₃ ergab stufenweise die Bildungskonstanten der entsprechenden Komplexe mit Mn(II), Co(II) und Zn(II). Die Werte sind logK ₁=3,45; logK ₁=4,58, logK ₂=4,03; logK ₁=5,08, logK ₂=4,66; für Mn(II); Co(II); Zn(II). Die Reihenfolge der Stabilität der Komplexe ist im Einklang mit derIrving-Williams-Reihung.

     

Ion-Pair High-Performance Liquid Chromatographic Retention Behavior of Copper(II)–1-Oxa-4,7,10,13- tetraazacyclopentadecane Complex

The ion-pair high-performance liquid chromatographic retention behavior of copper(II)–1-oxa-4,7,10,13-tetraazacyclopentadecane (Cu(II)–OTACP) complex is discussed with data from indirect spectrophotometric detection on the μBondapak CN column. The mobile phase was acetonitrile solution (MeCN:H₂O 20:80) containing sodium dodecyl sulfate (SDS) as ion-pairing reagent and sodium 1-naphthalenesulfonate (SNS) as detection reagent. The effects of the concentration of SDS and OTACP added to the sample solution to form the Cu(II)–OTACP complex on the capacity factor of the complex, k′, are illustrated. As a consequence of the study, it was found that two peaks anticipated for the 1:1 and 1:2 mole ratio complexes appeared, and the peak anticipated for the 1:2 mole ratio complex could be used to determine the Cu(II) ion. The method has been applied in the determination of Cu(II) ion in waste water and serum.     

Electrochemical polymerization of aniline in SDS admicelles

The electrochemical polymerization of aniline was studied in sodium dodecyl sulfate (SDS) admicelles. The results demonstrate that electrochemical polymerization of aniline can be catalyzed by admicelles. The catalytic efficiency in SDS solutions increased slowly with SDS concentration when the SDS concentration was very low, but increased rapidly when SDS admicelles formed on the electrode surface. The catalytic efficiency decreased with the addition of n-pentanol. The polyaniline films formed in SDS admicelles were nanometer films and the size of particles in the films increased with SDS concentration, but decreased with the addition of n-pentanol. Therefore, n-C₅H₁₁OH can be used to regulate the electrochemical polymerization of aniline in SDS admicelles.     

MEKC determination of vanadium from mineral ore and crude petroleum oil samples using precapillary chelation with bis(salicylaldehyde)tetramethyl‐ethylenediimine

An analytical procedure has been developed for the separation of Cu(II), Ni(II), Co(II), Fe(II), Pd(II), Th(IV), V(IV), and determination of Fe(II), Co(II), Ni(II), and V(IV) by MEKC after chelation with bis(salicylaldehyde)tetramethylethylenediimine (H₂SA₂Ten). Uncoated fused silica capillary was used with an applied voltage of 30 kV with photo‐diode array detection at 228 nm. SDS was added as micellar medium at pH 8.2 with sodium tetraborate buffer (0.1 M). Linear calibrations were established within 0.015–1000 μg/mL of each element with LOD within 5–67 ng/mL. The method was applied for the determination of vanadium from crude oil and ore samples in the range 0.34–2.40 and 114.2–720.7 μg/g with RSD 1.7–3.8 and 0.98–2.30% (n = 3), respectively. Fe, Ni, and Co present in crude oil and ore samples were also determined with RSD 1.3–2.8, 1.1–4.1, and 1.2–3.5% (n = 3), respectively. The results were compared with that of supplier's specifications and atomic absorption spectrometry (AAS). Method was evaluated by standard addition technique.     

Preconcentration and Separation of Copper(II) by 3-Aminopropylpolysiloxane Immobilized Ligand System

Porous solid insoluble polysiloxane-immobilized ligand system bearing propylamine of the general formula P-(CH₂)₃-NH₂ (where P represents [Si–O]_n siloxane network) was prepared and evaluated for the separation and preconcentration of copper(II) from aqueous solution. The ligand system retained Cu(II) effectively when used as a metal ion extractant. The ligand system also showed high selectivity to separate copper(II) from a mixture of metal ions (Co(II), Ni(II), Cu(II)) when used as chromatographic stationary phase. The optimum pH appeared to be pH = 5.5 using acetate buffer as an eluent. Thermal analysis showed that the ligand system is very stable at relatively high temperatures.     

Use of a microemulsion system to incorporate a lipophilic chiral selector in electrokinetic capillary chromatography

Summary The separation of (1R, 2S) and (1S, 2R)-ephedrine using microemulsion electrokinetic capillary chromatography is reported. The lipophilic chiral selector, (2R, 3R)-di-n-butyl tartrate (0.5% w/w), was introduced into the electrophoretic buffer consisting of 0.6% (w/w) sodium dodecyl sulfate (SDS) and 1.2% (w/w) 1-butanol in 15 mM tris-hydroxyaminomethane buffer (pH 8.1). The two isomers of ephedrine were separated with excellent resolution.     

Determination of sulfate and chloride ions in highly saline oilfield water by capillary electrophoresis using bilayer-coated capillaries and indirect absorption detection

Analysis of highly saline oilfield waters for anions presents challenges. Traditional analytical techniques used for such analysis tend to suffer from both poor sensitivity and selectivity due to the high concentrations of salt present in the samples. A capillary electrophoresis method was developed for the simultaneous determination of chloride and sulfate anions which is relevant to the oilfield analysis industry and of economic value. Due to the extremely high concentrations of chloride in highly saline oilfield waters, it is difficult to achieve baseline electrophoretic separation necessary for accurate quantitation. By using a capillary with a noncovalently bound bilayer coating using Polybrene, a cationic polymer and sodium dodecyl sulfate (SDS), an anionic surfactant and a buffer consisting of 50 mM TRIS, 30 mM SDS, 5% methanol and 26 mM chromium trioxide (CrO₃) at pH 6.7, baseline separation (R_s > 1.5) of chloride and sulfate was achieved. To mimic possible oilfield water samples, model water solutions of 5%, 10%, 15% and 20% chloride containing low ppm sulfate were prepared and successfully analysed using the method developed. In addition, the method was applied to determine chloride and sulfate anions in highly saline oilfield water samples. The accuracy of the method developed was verified by analysing NIST certified standards of chloride and sulfate. The results obtained for chloride and sulfate with the indirect CE-UV method were in close agreement (94–100% accuracy; <2.5% relative standard deviations) with those of the certified standard analysed by ion chromatography.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Copper(I)-mediated radical polymerization of methacrylates in aqueous solution

α-Methoxypolyethylene oxide methacrylate was polymerized by copper(I)-mediated living radical polymerization in aqueous solution to give polymers with controlled number-average molecular masses and narrow polydispersities. When equimolar quantities of initiator with respect to copper(I) bromide were used, the reaction was extremely fast with quantitative conversion achieved in less than 5 min at ambient temperature. However, the molecular weight distribution was broad, and control over the number-average molecular weight (M_n) growth was extremely poor; this is ascribed to an increase in termination because of the increased rate as a result of the coordination of water at the copper center. The complex formed between copper(I) bromide and N-(n-propyl)-2-pyridylmethanimine, bis[N-(n-propyl)-2-pyridylmethanimine]copper(I), was demonstrated to be stable in aqueous solution by ¹H NMR over 10 h at 25 °C. However, on increasing the temperature to 50 °C, decomposition occurred rapidly. Thus, polymerization temperatures were maintained at ambient temperature. When longer alkyl chains were utilized in the ligand, that is, pentyl and octyl, the complex acted as a surfactant leading to heterogeneous solutions. When the catalyst concentration was reduced by two orders of magnitude, the rate of polymerization was reduced with 100% conversion achieved after 60 min with the M_n of the final product being higher than that predicted and the polydispersity equal to 1.43. Copper(II) was added as an inhibitor to circumvent these problems. When 10% of Cu(I) was replaced by Cu(II) {[Cu(I)] + [Cu(II)]/[I] = 1/100}, the mass distribution showed a bimodal distribution, and the rate of polymerization decreased significantly. With a catalyst composition [Cu(I)]/[Cu(II)] = 0.5/0.5 {[Cu(I)] + [Cu(II)]}/[I] = 1/100, polymerization proceeded slowly with 80% conversion reached after 22 h. Thus, the concentration of Cu(I) was further reduced with [Cu(I)]/[Cu(II)] = 10/90, {[Cu(I)] + [Cu(II)]}/[I] = 1/100. The system then contained [Initiator]/[Cu(I)] = 1000/1 and [I]/[Cu(II)] = 1000/9. Under these conditions, the reaction reached 50% after 5 h with the polymer having both an M_n close to the theoretical value and a narrow polydispersity of PDi = 1.15. Optimum results were obtained by increasing the amount of catalyst. When a ratio of [Cu(I)]/[Cu(II)] = 10/90 with a ratio of [Cu]/[I] = 1/1, a conversion of 100% was achieved after less than 20 h, leading to a product having M_n = 8500 and PDi = 1.15. Decreasing the amount of Cu(II) relative to Cu(I) to [Cu(I)]/[Cu(II)] = 0.5/0.5 (maintaining the overall amount of copper) led to 100% conversion after 75 min: M_n = 9500, PDi = 1.10. Block copolymers have been demonstrated by sequential monomer addition with excellent control over M_n and PDi. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1696–1707, 2001     

Chiral separation with ligand-exchange micellar electrokinetic chromatography using a D-penicillamine-copper(II) ternary complex as chiral selector

D-Penicillamine is demonstrated for the first time as a chiral ligand for the enantioseparation of dansyl amino acids based on ligand-exchange micellar electrokinetic chromatography (LE-MEKC). Copper(II) was used as the central ion in the ternary complex. The effect of surfactant on the resolution was significant. A concentration of 20 mM sodium dodecyl sulfate (SDS) was shown to be necessary for the separation. Other important parameters, such as the concentration ratio of D-penicillamine (D-PEN) to Cu2+, the kind of metal central ion, the type and pH value of buffer, were also investigated. N-Acetyl-D-penicillamine and L-valine (Val), with similar structure to D-penicillamine, were applied as their copper(II) complexes as chiral selector and the chiral recognition mechanism is briefly discussed. Under optimum experimental conditions, i.e., 20 mM NH4OAc, pH 6.5, a 2:1 concentration ratio of D-penicillamine to Cu(II), 4 mM CuSO4 and 8 mM D-penicillamine, the chiral separation of eight pairs of different dansyl amino acid enantiomers was accomplished with resolution ranging from 1.1 to 5.9. When L-PEN was used instead of D-PEN, reversal of the migration order was observed.     

Synthesis and crystal structure of a new copper(II) binuclear complex bridged by the reduced derivative of a nitronyl nitroxide biradical

A new copper(II) binuclear complex, [Cu(hfac)₂]₂(IMH)₂Ph(OMe)₂ ((IMH)₂Ph(OMe)₂?=?2,5-dimethoxyl-1,4-bis(4′,4′,5′,5′-tetramethylimidazoline-3′-oxide)benzene, hfac?=?hexafluoroacetonate), bridged by a reduced derivative of a nitronyl nitroxide biradical has been synthesized and characterized by X-ray crystallography. The complex crystallizes in the monoclinic space group P2₁/n, with a?=?10.002(14), b?=?19.950(3), c?= 14.504(2) Å, β?=?108.842(3)° and Z?=?2. The structure refined to a final R value of 0.0644. The complex contains two copper(II) ions bridged by a reduced derivative of a nitronyl nitroxide biradical with a Cu?···?Cu separation of 8.430(2) Å.     

Micellization of sodium dodecyl sulfate and polyoxyethylene dodecyl ethers in solution

The effect of polyoxyethylene type nonionic surfactants (C₁₂E _n n = 3, 4, 5, 6, 7 and 8) on the aqueous solution of sodium dodecyl sulfate (SDS) in absence and presence of NaCl was examined using small-angle neutron scattering (SANS), dynamic light scattering (DLS), and viscosity measurements. Upon addition of C₁₂E _n , micellar size of SDS was found to increase significantly, and such micellar elongation was further enhanced in the presence of NaCl. Micellar growth is most significant in presence of shorter moieties of C₁₂E _n (e.g., n = 3, 4) as compared to higher ethereal oxygen content. The results of structural investigations with SANS and DLS to confirm this assumption are reported. The cloud point of C₁₂E _n has increased upon addition of SDS and decrease with NaCl, and a typical behavior is observed when both SDS and NaCl were present.     

Separation and characterisation of products of the reaction between propionamide and formaldehyde

Summary Propionamide-formaldehyde reaction products have been characterised using micellar electrokinetic chromatography (MEKC), HPLC-electrospray-MS (HPLC-ES-MS) and time-of-flight-MS (TOF-MS). HPLC-MS-MS was used to distinguish between isomeric species. The MEKC separation of all reaction products was obtained with good resolution and efficiency. Comparison of water-micelle distribution constants (P _MEKC) for propionamide-formaldehyde with those for caprolactam-formaldehyde reaction products suggests that the concentration of sodium dodecyl sulfate appropriate for use in MEKC is inversely related toP _MEKC. Quantification of all species containing one or two amide units was achieved using standard calibration, mass balance and the assumption of identical absorption coefficients for the same functional groups in monomers and dimers.     

Complex Formation Reactions of Promethazine Copper(II) and Various Biologically Relevant Ligands. Synthesis,Equilibrium Constants,Spectroscopic Characterization and Biological Activity

Binary and ternary complexes of copper(II) involving promethazine, N,N-dimethyl-3-(phenothiazin-10-yl)propylamine (Prom) and various biologically relevant ligands containing different functional groups, were investigated. The ligands (L) are dicarboxylic acids, amino acids, amides and DNA constituents. The ternary complexes of amino acids, dicarboxylic acids or amides are formed by simultaneous reactions. The results showed the formation of Cu(Prom)(L) complexes with amino acids and dicarboxylic acids. The effect of chelate ring size of the dicarboxylic acid complexes on their stability constants was examined. Amides form both Cu(Prom)(L) complexes and the corresponding deprotonated species Cu(Prom)(LH₋₁). The ternary complexes of copper(II) with (Prom) and DNA are formed in a stepwise process, whereby binding of copper(II) to (Prom) is followed by ligation of the DNA components. DNA constituents form both 1:1 and 1:2 complexes with Cu(Prom)²⁺. The stability of these ternary complexes was quantitatively compared with their corresponding binary complexes in terms of the parameters Δlog₁₀ K. The values of Δlog₁₀ K indicate that the ternary complexes containing aromatic amino acids were significantly more stable than the complexes containing alkyl- and hydroxyalkyl-substituted amino acids. The concentration distribution of various complex species formed in solution was also evaluated as a function of pH. The solid complexes [Cu(Prom)L)] where L=1,1-cyclobutanedicarboxylic acid (CBDCA), oxalic and malonic acid were isolated and characterized by elemental analysis, infrared, TGA, and magnetic susceptibility measurements. Spectroscopic studies of the complexes revealed that the complexes exhibits square planar coordination with copper(II). The isolated solid complexes have been screened for their antimicrobial activities using the disc diffusion method against some selected bacteria and fungi. The activity data show that the metal complexes are found to have antibacterial and antifungal activity.     

Preparation of morin modified nanometer SiO<Subscript>2</Subscript> as a sorbent for solid-phase extraction of trace heavy metals from biological and natural water samples

Morin was successful as a chemical modifier to improve the reactivity of the nanometer SiO₂ surface in terms of selective binding and extraction of heavy metal ions. This new functionalized nanometer SiO₂ (nanometer SiO₂-morin) was used as an effective sorbent for the solid-phase extraction (SPE) of Cd(II), Cu(II), Ni(II), Pb(II), Zn(II) in solutions prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using static and dynamic procedures in detail. The pH 4.0 was chosen as the optimum pH value for the separation of metal ions on the newly sorbent. Complete elution of the adsorbed metal ions from the nanometer SiO₂-morin was carried out using 2.0 mL of 0.5 mol L⁻¹ of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 22.36, 36.8, 40.37, 33.21 and 25.99 mg metal/g SiO₂-morin for Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The time for 95% sorption for Cu(II) and Ni(II) and 70% sorption for Cd(II), Pb(II) and Zn(II) was less than 2 min. The relative standard deviation (RSD) of the method under optimum conditions was lower than 5.0% (n = 11). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. The nanometer SiO₂-morin was successfully employed in the separation and preconcentration of trace Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) from the biological and natural water samples yielding 75-folds concentration factor.     

Syntheses and Structures of Three Copper Coordination Polymers Based on Bis(triazol‐1‐ylmethyl)benzene

Three copper(II) coordination polymers [Cu(mbtz)₂(NCS)₂]_n ( 1 ), [Cu(mbtz)₂Cl₂]_n ( 2 ) and [Cu(mbtz)(btec)_0.5]_n ( 3 ) (mbtz=1,3‐bis(1,2,4‐triazol‐1‐ylmethyl)benzene, btec=1,2,4,5‐benzenetetracarboxylate) were synthesized. In 1 and 2 , two mbtz ligands are wrapped around each other and are held together by Cu(II) atoms to form one‐dimensional double chain. In 3 , each btec ligand connects four Cu(II) atoms through its four carboxylate groups, resulting in a planar two‐dimensional [Cu(btec)_0.5]_n network. The Cu(II) atoms are further coordinated mbtz ligands to fulfil their coordination geometry and construct new [Cu(btec)_0.5(mbtz)]_n network. 2 and 3 further form the three‐dimensional network through the π···π stacking interactions between the mbtz ligands. The thermal stabilities of 1 , 2 and 3 were measured.     

Spectroscopic analysis of naphtholazobenzimidazole in organised solution

Micelle–water partition coefficient (K_x ) of naphtholazobenzimidazole dye (NAB) in aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) has been determined spectrophotometerically. Changes in absorption patterns of dye caused by surfactants and solvents were quantified in terms of dye–surfactant ratio (n _D/n _S) and solvent water partition coefficients (P), respectively. Multiple residence sites have been suggested for dye molecules within micelles, based on shifts in azo-hydrazone tautomeric equilibrium. Micelle–water partition coefficients were used to evaluate the influence of dye on critical micelle concentration of CTAB and SDS. At same micelle concentration, M, the relative solubility of NAB was greater in cationic surfactant CTAB than in anionic surfactant SDS.