C_6H_2(OH)_3CH_3氧化成羟基苯甲酸反应路径的DFT研究

运用密度泛函(DFT)理论,采用Materials Studio 8.0,用GGA/BP方法研究了C_6H_2(OH)_3CH_3氧化成羟基苯甲酸的反应路径。结果表明,甲基上的氢原子被氧化成羟基以及羟基被氧化为醛基及醛基被氧化成羧基均为放热过程。分子C_6H_2(OH)_3CH_3中甲基氧化成羧基的主路径为三个氢原子氧化反应路径,其路径为C_6H_2(OH)_3CH_3+3O→C6H2(OH)3C(OH)3→C6H2(OH)3COOH+H2O,该路径受限于羟基直接被氧化成羧基过程,需克服130 k J/mol的反应势垒,反应速率常数对数ln(k)为-22.96 s-1;醛基、羟基优先被氧化成羧基的顺序为:-CHO-C(OH)3-HC(OH)2-H2C(OH);提高反应温度、氧气浓度均有利于羟基苯甲酸的生成,适当的催化剂有利于促进整个反应的进行。     

Substituent effects on some physicochemical properties of chalcones and their vinylogues

Carbonyl stretching frequencies (ν_CO), dipole moments (μ), longwave maxima (λ_max), half-wave potentials (°_1/2), and relative intensities (Z/Z₀) of benzoyl-ion in mass-spectra oftrans chalcones and their vinylogues of the general type PhCO(CH=CH)_nC₆H₄R-p (I) were measured. Contrary to the previously investigated polyenes of the type R(CH=CH)_nR′ (R′ = CHO or COOEt) variation of the substituent R in compounds I has little influence on properties of I in the ground state and a satisfactory linear relationship between (ν_CO) or μ and σ constants exists only in the case of I (n = 0, 1); the best correlation with σ⁺ indicates that the mesomeric mechanism plays a great part in the transmission of electronic effects. λ_max.,E_1/2, orZ/Z₀ of all series I (n = 0–3) correlate with σ_p or σ⁰ constants, and the separation of mesomeric and inductive effects by multiparametric correlation reveals that in this case inductive effect is of great importance in the transmission of electronic effects. These features were accounted for by the non-planar structure of molecules of I, which was confirmed by X-ray analysis of I (R = Br). The Pariser-Parr-Pople method has also been applied to the calculation of π-electronic density in molecules I and it was found that the introduction of various substituents in para position of I exercises a very little influence on the electronic distribution in compounds I.     

Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Relative thermodynamic stabilities of isomeric alkyl allyl and alkyl (Z)-propenyl ethers

The relative thermodynamic stabilities of ten allyl ethers (ROCH₂CH=CH₂) and the corresponding isomeric (Z)-propenyl ethers (where R is an alkyl group, or a methoxysubstituted alkyl group) have been determined by chemical equilibration in DMSO solution with t-BuOK as catalyst. From the variation of the equilibrium constant with temperature, the values of the thermodynamic parameters ΔGΘ, ΔHΘ and ΔSΘ of isomerization at 298.15 K were evaluated. The propenyl ethers are highly favored at equilibrium, the values of both ΔGΘ and ΔHΘ for the allyl → propenyl reaction being ca. −18 to −25 kJ mol⁻¹. The favor of the propenyl ethers is increased by bulky alkyl substituents, and decreased by methoxy-substituted alkyl groups. In most cases the entropy contribution is negligible; however, for R = (MeO)₂CH and R = (MeO)₃C the values of ΔSΘ are ca. −5 J K⁻¹ mol⁻¹.     

Electrochemical studies on Mo2Cl4(PR3)4 compounds containing phosphines of varied basicity

The electrochemical behaviour of a series of Mo₂Cl₄(PR₃)₄ complexes (PR₃ = PMe₃, PEt₃, PPrⁿ₃,PBuⁿ₃, PH₂Ph, PMe₂Ph, PEt₂Ph, PHPh₂, PMePh₂, PEtPh₂, P(OMe)₃, P(OMe)Ph₂) has been examined by cyclic voltammetry in dichloromethane solution. The phosphines were chosen to provide a wide range of Lewis basicity/π acidity as reflected by Tolman's _co IR and Bodner's Δδ_co ¹³C NMR spectral parameters for Ni(CO)₃(PR₃). The Mo₂ compounds undergo either quasi-reversible or irreversible one-electron oxidations except for P(OMe)₃ and P(OMe)Ph₂ for which no clectroactivity was observed before the solvent limit. The anodic peak potentials, E_p,a, span a range of nearly 700 mV. The half-wave potentials, E_1/2,for the quasi-reversible couples and E_p,a for all were plotted against the IR and NMR values and against the δ → δ* transition energies for the Mo₂ species in dichloromethane and in the solid state. For the organometallic spectral parameters excellent linear correlations were obtained while with the electronic spectral data fair correlations resulted. These results indicate that the Mo₂Cl₄(PR₃)₄ complexes become more difficult to oxidize as the electron-withdrawing nature of the PR₃ substituents increases and the δ → δ* band energy decreases.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

State-selected dissociation of cis-HONO(Ã A″): Effect of intramolecular hydrogen bonding

The influence of intramolecular hydrogen bonding on the photodissociation of cis-HONO is probed via measurements on the OH fragment ejected by specific ---N=0 stretching (ν₂) vibrational levels of the à state. Due to hydrogen bonding between the H atom and the terminal oxygen, the ν₂ motion is coupled to the in-plane HON bend ν₃. Since the latter evolves into fragment rotation, the rotational energy and anisotropy of the OH product increases with the number of ν₂ quanta. By contrast, ν₂ in trans HONO is a relatively isolated ---N=O vibration and thus does not influence the OH photofragment's properties.     

Half-sandwich and mixed-ring uranium complexes

The monocyclooctatetraene uranium complex [U(COT)(I)₂(THF)₂] (COT=η-C₈H₈; THF=tetrahydrofuran), isolated from the reaction of bis(cyclooctatetraene)uranium with iodine, is a precursor for the synthesis of the alkyl derivatives [U(COT)(CH₂Ph)₂i (HMPA) ₂], [U(COT)(CH₂SiMe₃)₂(HMPA)] (HMPA=hexamethyl phosphorous triamide) and [U(COT)CH₂SiMe₃)₃] [Li(THF)₃] and of the mixed-ring compounds [U(COT)(η-C₅R₅)(I)] (R=H or Me). The last were used to prepare the amide and alkyl complexes [U(COT)(η-C₅H₅)(N{SiMe₃}₂)] and [U(COT)(η-C₅Me₅)(CH₂SiMe₃)].     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Interaction of antitumor drug Sn(CH3)2Cl2 with DNA and RNA

Sn(CH₃)₂Cl₂ exerts its antitumor activity in a specific way. Unlike anticancer cis-Pt(NH₃)₂Cl₂ drug which binds strongly to the nitrogen atoms of DNA bases, Sn(CH₃)₂Cl₂ shows no major affinity towards base binding. Thus, the mechanism of action by which tinorganometallic compounds exert antitumor activity would be different from that of the cisplatin drug. The aim of this study was to examine the binding of Sn(CH₃)₂Cl₂ with calf thymus DNA and yeast RNA in aqueous solutions at pH 7.1–6.6 with constant concentrations of DNA and RNA and various molar ratios of Sn(CH₃)₂Cl₂/DNA (phosphate) and Sn(CH₃)₂Cl₂/RNA of 1/40, 1/20, 1/10, 1/5. Fourier transform infrared (FTIR) and UV–visible difference spectroscopic methods were used to determine the Sn(CH₃)₂Cl₂ binding mode, binding constant, sequence selectivity and structural variations of Sn(CH₃)₂Cl₂/DNA and Sn(CH₃)₂Cl₂/RNA complexes in aqueous solution. Sn(CH₃)₂Cl₂ hydrolyzes in water to give Sn(CH₃)₂(OH)₂ and [Sn(CH₃)₂(OH)(H₂O)_n]⁺ species. Spectroscopic evidence showed that interaction occurred mainly through (CH₃)₂Sn(IV) hydroxide and polynucleotide backbone phosphate group with overall binding constant of K(Sn(CH₃)₂Cl₂–DNA)=1.47×10⁵ M⁻¹ and K(Sn(CH₃)₂Cl₂–RNA)=7.33×10⁵ M⁻¹. Sn(CH₃)₂Cl₂ induced no biopolymer conformational changes with DNA remaining in the B-family structure and RNA in A-conformation upon drug complexation.     

Ab initio and DFT computer studies of complexes of trimethylphosphine and products of substituted phosphonium cations with hydroxide, chloride and fluoride anions: Phosphorus analogues of choline and acetylcholine

Theoretical calculations (DFT, MP2) are reported for up to four sets of reaction products of trimethylphosphine, (CH₃)₃P, each with H₂O, HCl and HF together with DFT calculations on up to three sets of reaction products of substituted phosphonium cations, (CH₃)₃P–R⁺. These products comprise (a) P(III) normal complexes (CH₃)₃PHY, (b) P(IV) ‘reverse’ complexes Y(H–CH₂)₃P–R, (c) P(IV) ylidic complexes YHCH₂(CH₃)₂P–R and (d) P(V) covalent compounds Y–P(CH₃)₃–R for Y=HO, Cl and F and R=H, CH₃, C₂H₅, C₂H₄OH and C₂H₄OC:OCH₃. Calculations are carried out at the B3LYP/6-31+G(d,p) level in all cases and also at the MP2/6-31+G(d,p) level for systems in which R=H. Minimum energy structures are determined for predicted complexes or structures and geometrical properties, harmonic vibrations and BSSE corrected binding energies are reported and compared with the limited experimental information available. Potential energy scans predict equilibria between covalent trigonal bipyramidal P(V) forms and reverse complexes comprising hydrogen bonded or ion pair, tetrahedral P(IV) forms separated by low potential energy barriers. Similar scans are also reported for equilibria between reverse complexes and ylidic complexes for Y=OH and R=CH₃, C₂H₅, C₂H₄OH and C₂H₄OC:OCH₃. Corrected binding energies, structures and values of harmonic modes are discussed in relation to bonding The names ‘pholine’ and ‘acetylpholine’ are suggested for phosphorus analogues to choline and acetylcholine.     

Group 3 and 4 metal alkyl and hydrido complexes containing a linked amido-cyclopentadienyl ligand: “constrained geometry” polymerization catalysts for nonpolar and polar monomers

In order to understand the nature of the putative cationic 12-electron species [M(η⁵:η¹-C₅R₄SiMe₂NR′)R″]⁺ of titanium catalysts supported by a linked amido-cyclopentadienyl ligand, several derivatives with different cyclopentadienyl C₅R₄ and amido substituents R′ were studied systematically. The use of tridentate variants (C₅R₄SiMe₂NCH₂CH₂X)²⁻ (C₅R₄=C₅Me₄, C₅H₄, C₅H₃^tBu; X=OMe, SMe, NMe₂) allowed the NMR spectroscopic observation of the titanium benzyl cations [Ti(η⁵:η¹-C₅Me₄SiMe₂NCH₂CH₂X)(CH₂Ph)]⁺. Isoelectronic neutral rare earth metal complexes [Ln(η⁵:η¹-C₅R₄SiMe₂NR′)R″] can be expected to be active for polymerization. To arrive at neutral 12-electron hydride and alkyl species of the rare earth metals, we employed a lanthanide tris(alkyl) complex [Ln(CH₂SiMe₃)₃(THF)₂] (Ln=Y, Lu, Yb, Er, Tb), which allows the facile synthesis of the linked amido-cyclopentadienyl complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(CH₂SiMe₃)(THF)]. Hydrogenolysis of the linked amido-cyclopentadienyl alkyl complex leads to the dimeric hydrido complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(THF)(μ-H)]₂. These complexes are single-site, single-component catalysts for the polymerization of ethylene and a variety of polar monomers such as acrylates and acrylonitrile. Nonpolar monomers such as -olefins and styrene, in contrast, give isolable mono-insertion products which allow detailed studies of the initiation process.     

Synthesis of Mg5(CO3)4(OH)2·4H2O with Flower-like Microstructure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide,Mg_5(CO_3)_4(OH)_2·4H_2O,with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant.Reaction time has an important effect on the final morphology of the product.The micro-structure and morphology of Mg_5(CO_3)_4(OH)_2·4H_2O were characterized by means of X-ray diffractometry(XRD),field-emission scanning electron microscopy(FE-SEM).Brunauer-Emmett-Teller(BET)surface areas of the samples were also measured.The probable formation mechanism of flower-like micro-structure was discussed.It was found that Mg_5(CO_3)_4(OH)_2·4H_2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate(DPC)by transesterification of dimethyl carbonate(DMC)with phenol.     

The lively chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes, analogues of surface reactions in heterogeneous catalysis

The chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes is reviewed. The complex [{(η⁵-C₅Me₅)RhCl₂}₂] (1a) reacted with MeLi to give, after oxidative work-up, blood-red cis-[{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂], 2. This has the two rhodiums in the +4 oxidation state (d⁵), and linked by a metal-metal bond (2.620 Å). Trans-2 was formed on isomerisation of cis-2 in the presence of Lewis acids, or by direct reaction of 1a with Al₂Me₆, followed by dehydrogenation with acetone. The Rh-methyls in [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂] were readily replaced under acidic conditions (HX) to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(X)₂] (X = Cl, Br or I); these latter complexes reacted with a variety of RMgX to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)₂] (R = alkyl, Ph, vinyl, etc.). Trans-2 also reacted with HBF₄ in the presence of L to give first [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)(L)]⁺ and then [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(L)₂]²⁺ (L = MeCN, CO, etc.). The {(η⁵-C₅Me₅)Rh(μ-CH₂)}₂ core is rather kinetically inert and also forms a variety of complexes with oxy-ligands, both cis-, e.g. [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(μ-OAc)]⁺ and trans-, such as [(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(H₂O)₂]²⁺. The complexes [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)L]⁺ (R = Me or aryl) in the presence of CO, or [{(η⁵-C₄Me₅)Rh(μ-CH₂)}₂(R)₂] (R = Me, Ph or CO₂Me) in the presence of mild oxidants, readily yield the C---C---C coupled products RCH=CH₂. The mechanisms of these couplings have been elucidated by detailed labelling studies: they are more complex than expected, but allow direct analogies to be drawn to C---C couplints that occur during Fischer-Tropsch reactions on rhodium surfaces.     

Syntheses, X-ray structures, and reactions of ruthenium carbonyl complexes containing 1,1-dithiolates

Treatment of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ or [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] with uni-negative 1,1-dithiolate anions via potassium dimethyldithiocarbamate, sodium diethyldithiocarbamate, potassium tert-butylthioxanthate, and ammonium O,O′-diethylthiophosphate gives both monomeric and dimeric products of cis-[Ru(CO)₂(η²-(SS))₂] ((SS)⁻=Me₂NCS₂⁻ (1), Et₂NCS₂⁻ (2), ^tBuSCS₂⁻ (3), (EtO)₂PS₂⁻ (4)) and [Ru(CO)(η²-(Me₂NCS₂))(μ,η²-Me₂NCS₂)]₂ (5). The lightly stabilized MeCN ligands of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ are replaced more readily than the bound acetate ligands of [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] by thiolates to produce cis-[Ru(CO)₂(η²-(SS))₂] with less selectivity. Structures 1 and 5 were determined by X-ray crystallography. Although the two chelating dithiolates are cis to each other in 1, the dithiolates are trans to each other in each of the {Ru(CO)(η²-Me₂NCS₂)₂} fragment of 5. The dimeric product 5 can be prepared alternatively from the decarbonylation reaction of 1 with a suitable amount of Me₃NO in MeCN. However, the dimer [Ru(CO)(η²-Et₂NCS₂)(μ,η²-Et₂NCS₂)]₂ (6), prepared from the reaction of 2 with Me₃NO, has a structure different from 5. The spectral data of 6 probably indicate that the two chelating dithiolates are cis to each other in one {Ru(CO)(η²-Et₂NCS₂)₂}fragment but trans in the other. Both 5 and 6 react readily at ambient temperature with benzyl isocyanide to yield cis-[Ru(CO)(CNCH₂Ph)(η²-(SS))₂] ((SS)=Me₂NCS₂⁻ (7) and Et₂NCS₂⁻ (8)). A dimerization pathway for cis-[Ru(CO)₂(η²-(SS))₂] via decabonylation and isomerization is proposed.     

A molecular mechanics study on novel Ln(0) π-arene compounds

To examine the steric effects on the stability of Ln(0) π-arene compounds, molecular mechanics (MMP2) calculations are performed on Gd(η-C₆H₆)₂ and Ln(η-Bu^t₃C₆H₃)₂ (where Ln is Gd, Yb and Y ). The small potential-well depth ( ≈ 2 kcal mol⁻¹) and the large Gd-C equilibrium distance ( > 3.3 Å) explains the instability of Gd(η-C₆H₆)₂, while the difference in the stability between Gd(η-Bu^t₃C₆H₃)₂ and Yb(η-Bu^t₃C₆H₃)₂ can be attributed to the difference in the van der Waalsradii of the two metals and the more contracted 5d orbitals on the Yb atom.     

The excess molar volumes of (an alkanol + a branched chain ether) at the temperature 298.15 K and the application of the ERAS model

The excess molar volumes V_m^E {x(CH₃OH or CH₃CH₂OH or CH₃(CH₂)₂OH or CH₃CH(OH)CH₃ + (1 - x){CH₃(CH₂)₂}₂O or CH₃C(CH₃)₂OCH₃ or CH₃CH₂C(CH₃)₂OCH₃} have been calculated from measured values of density over the whole composition range at the temperature 298.15 K in order to investigate OH … O specific interactions. The results are explained in terms of the strong self-association of the alkanols, the specific interaction between the alkanol, and the ether molecules and packing effects upon mixing. The experimental V_m^h results presented here, together with the previously reported data for the molar excess enthalpy H_m^E, has been used to test the Extended Real Associated Solution (ERAS) model.     

Preparation and x-ray diffraction characterization of the kambaldaite-like sodium cobalt carbonate hydroxide hydrate, Na2Co8(CO3)6(OH)6·6H2O

A new sodium cobalt carbonate hydroxide hydrate, Na₂Co₈(CO₃)₆(OH)₆·6H₂O, has been prepared at room temperature by treatment of Co(OH)NO₃·H₂O with a concentrated aqueous solution of NaHCO₃. X-Ray powder diffractometry and the results of the chemical analyses show that the compound is isotypical to Na₂Ni₈(CO₃)₆(OH)₆·6H₂O —kambaldaite, a unique mineral with no known synthetic or natural analogues.     

Synthesis of Re-Ru heterobimetallic polyhydride complexes. Study of the influence of ligands bonded to the monometallic precursors on the nature of the isolated binuclear complexes

The reaction of K[H₆ReL₂] with [RuHCl(CO)(PPh₃)_3−x {P(OPrⁱ}₃)_x](L₂ = (PMePh₂)₂, dppe, (AsPh₃)₂, or (PPh₃)₂; x = 0, 1 or 2) leads to [L₂(CO)HRe(μ-H)₃RuH(PPh₃)_2−y{P(OPrⁱ)₃}_y] (x = 0 or 1, Y = 0; X = 2, Y = 1(L₂ = PPh₃)) in a first step. Under the reaction conditions most of these complexes react rapidly with the liberated phosphine giving [L₂(CO)Re(μ-H)₃Ru(PPh₃)_3−y- {P(OPrⁱ)₃}_y] (L₂ = (PMePh₂)₂ or dppe, Y = 0; L₂ = (PPh₃)₂, Y = 1) as the only iso complexes. The structure of [(PMePh₂)₂(CO)Re(μ-H)₃Ru(PPh₃)₃] has been establishedby X-ray structure analysis. The complex [(PPh₃)₂(CO)Re(μ-H)₃Ru(PPh₃)₂(P(OPrⁱ)₃)] reacts with molecular hydrogen under pressure to generate [L₂(CO)HRe(μ-H)₃RuH(PPh₃)(P(OPrⁱ)₃) as the sole product.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.