Synthesis and characterization of magnetic nanoparticles

Magnetic nanoparticles with average diameter in the range of 6.4-8.3 nni have been synthesized by a chemical co-precipitation of Fe(Ⅱ)and Fe(Ⅲ)salts in 1.5 M NH4OH solution.The size of the magnetic particles is dependent on both temperature and the ionic strength of the iron ion solutions.The magnetic particles formed at higher temperature or lower ionic strength were slightly larger than those formed at lower temperature or higher ionic strength respectively.In spite of the different reaction conditions,all the resultant nanoparticles are nearly spherical and have a similar crystalline structure.At 300 K,such prepared nanoparticles are superparam-agnetic.The saturation magnetizations for 7.8 and 6.4 nm particles are 71 and 63 emu/g respectively,which are only ~ 20-30% less than the saturation magnetization(90 emu/g)of bulk Fe3O4 Our results indicated that a control of the reaction conditions could be used to tailor the size of magnetic nanoparticles in free precipitation.     

ICP-MS-based characterization of inorganic nanoparticles—sample preparation and off-line fractionation strategies

Validated and easily applicable analytical tools are required to develop and implement regulatory frameworks and an appropriate risk assessment for engineered nanoparticles (ENPs). Concerning metal-based ENPs, two main aspects are the quantification of the absolute mass concentration and of the “dissolved” fraction in, e.g., (eco)toxicity and environmental studies. To provide information on preparative aspects and on potential uncertainties, preferably simple off-line methods were compared to determine (1) the total concentration of suspensions of five metal-based ENP materials (Ag, TiO₂, CeO₂, ZnO, and Au; two sizes), and (2) six methods to quantify the “dissolved” fraction of an Ag ENP suspension. Focusing on inductively coupled plasma–mass spectrometry, the total concentration of the ENP suspensions was determined by direct measurement, after acidification and after microwave-assisted digestion. Except for Au 10 nm, the total concentrations determined by direct measurements were clearly lower than those measured after digestion (between 61.1 % for Au 200 nm and 93.7 % for ZnO). In general, acidified suspensions delivered better recoveries from 89.3 % (ZnO) to 99.3 % (Ag). For the quantification of dissolved fractions two filtration methods (ultrafiltration and tangential flow filtration), centrifugation and ion selective electrode were mainly appropriate with certain limitations, while dialysis and cloud point extraction cannot be recommended. With respect to precision, time consumption, applicability, as well as to economic demands, ultrafiltration in combination with microwave digestion was identified as best practice.

Preparation and characterization of acrylic polymer–nanogold nanocomposites from 3-mercaptopropyltrimethoxysilane encapsulated gold nanoparticles

In this study, acrylic polymer–nanogold nanocomposites and their cast films were prepared from an acrylic copolymer and 3-mercaptopropyltrimethoxysilane (MPS) stabilized gold nanoparticles by a sol–gel reaction. The acrylic copolymer was synthesized from methyl methacrylate (MMA) and 3-(trimethoxysilyl)propyl methacrylate (MSMA). The Si–OMe groups of MPS on the surface of gold nanoparticles (MPS–Au) provided the further reaction with the same groups of MSMA, hence the covalent bonds between polymers and MPS–Au nanoparticles were formed. FE-SEM images show MPS–Au nanoparticles are dispersed well in the prepared nanocomposites, and no large aggregation is occurred. TGA results indicate that the decomposed temperatures (T_d) of low Au-content (0.1 wt.%) nanocomposites are higher than these of the acrylic copolymer and high Au-content (1.0 wt.%) nanocomposites. The temperature of maximum decomposed rate (T_p) of each prepared nanocomposite is higher than that of the acrylic copolymer. The hardness of the cast film increases with increasing the Au content. The results show the improved thermal stability and application potentials of the prepared acrylic polymer–nanogold nanocomposites.     

Structures of silylenoids and effects of metallic and haloid atoms on their stability

The structural characteristics of silylenoids, H2SiMX, where M = Li or Na and X = F or Cl, have been studied by ab initio calculations. H2SiMX can be represented as adducts of silylene H2Si with alkali metal halogenides, MX. The associative energies at different calculational levels of various structures of H2SiMX are given. Effects of metallic and haloid atoms on the stability of various structures of H2SiMX are also discussed in this paper.     

Purification and characterization of an extracellular β-glucosidase with high transglucosylation activity and stability from Aspergillus niger No. 5.1

An extracellular beta-glucosidase was extracted from the culture filtrate of Aspergillus niger No. 5.1 and purified to homogeneity by using ammonium sulfate precipitation, Chitopearl-DEAE chromatography, and Sephadex G-100 chromatography. The specific activity of the enzyme was enriched 6.33-fold, with a recovery of 11.67%. The enzyme was a monomer and the molecular mass was 67.5 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis and 66.5 kDa by gel-filtration chromatography. The enzyme had optimum activity at pH 6.0 and 60 degrees C and was stable over the pH range of 3.0-9.0. It showed specificity of hydrolysis for p-nitrophenyl-beta-D-glucoside and cellobiose. The Km and Vmax values of the enzyme for cellobiose and salicin were 5.34 mM, 2.57 micromol/(mL.s), and 3.09 mM, 1.34 micromol/(mL.s), respectively. Both amino acid composition and N-terminal amino acid sequence of the enzyme were determined, which provides useful information for cloning of this enzyme.     

Solvothermal preparation,and characterization,of Cu–Ag nanoparticles

Cu–Ag nanoparticles have been successfully synthesized by one-pot solvothermal treatment of a mixture of AgNO₃ and Cu(OAc)₂·H₂O in ethylene glycol solution at 180 °C for 10 h. The samples were characterized by UV–visible absorption, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that Cu–Ag nanoparticles and a small amount of phase-separated Cu–Ag alloy nanoparticles with an average diameter of 100 ± 30 nm were synthesized by the solvothermal treatment procedure. The mechanism of formation is discussed.     

Palladium nanoparticles generated from allylpalladium chloride in situ: A simple and highly efficient catalytic system for Mizoroki–Heck reactions

The Mizoroki–Heck reactions of aryl halides catalyzed by palladium nanoparticles generated in situ from a simple allyl palladium precursor were investigated in argon. The high turnover numbers of 9,300,000 have been obtained with 4-bromobenzonitrile as substrate and 3500 with 4-nitrochlorobenzene. When the reaction was performed in air, a low yield was given, but it could be improved obviously by addition of PEG-400. The main reason was that inactive Pd(II) species could be rapidly reduced to the active Pd(0) by PEG. In other word, the existence of air and PEG led to a synergistic effect which the oxidation by air prevents the aggregation of Pd NPs and the reduction by PEG maintains the high activity of Pd(0) species.     

Smart,self-repair polymers based on acryloyl-6-aminocaproic acid and modified with magnetic nanoparticles—preparation and characterization

Capability of materials to self-repair is an innovative and unique property from a point of view both chemistry and physics. Moreover, such property could arouse special interests if such an ability could be caused by the selection of the environmental parameters. Such materials—polymers based on acryloyl-6-aminocaproic acid (A6ACA)—were synthesized in the present paper. In addition, mentioned polymers have been modified with different amount of magnetic nanoparticles solution. Subsequently, sorption capacity and behavior of synthesized polymers in simulated body fluids have been determined. What is also important, studies on cytotoxicity of prepared materials in relation to fibroblasts and cells of cancer origin have been conducted. Materials have also been analyzed by Fourier transform infrared spectroscopy and scanning electron microscopy method. Based on the research aiming at physicochemical characteristics of abovementioned materials it was proved that prepared hydrogels showed self-repair property in a low pH environment. Apart from this essential issue, these were characterized by high sorption capacity, high porosity which decreases with the introduced amount of nanoparticles and, what is important, cytotoxicity to cancer cells. Such combination is a very interesting from a point of view of many realms and due to its unique features may be widely applicable in the nearest future.     

Thiophosphorosulfenyl bromides and iodides — synthesis and characterization

The reaction of diphenyltin bis(dithiophosphates) with N-bromo- and N-iodosuccinimides afforded corresponding thiophosphorosulfenyl bromides and iodides, which reacted with a variety of nucleophiles such as thiol, dithiocarboxylic acid, amine and olefin to give novel unsymmetrical disulfides, sulfenamides and dithiophosphoric acid esters.     

Reactive poly（divinyl benzene-co-maleic anhydride） nanoparticles：Preparation and characterization

Polymeric nanoparticles（NPs）have drawn great interest in the past few years due to their potential applications in the felds of biomedical and optical technologies.However,it is still a challenge to prepare functional polymeric NPs,especially for particle diameters smaller than 50 nm.In this work,we demonstrate a one-pot method to fabricate reactive poly（divinyl benzene-co-maleic anhydride）NPs（PDVBMAH NPs）through a self-stable precipitation polymerization process.The size and morphology of these PDVBMAH NPs were characterized in detail by scanning electronic microscopy,and their chemical structure was determined by IR.The results showed that these NPs were highly cross-linked and their diameter was about 30 nm with narrow distribution.Additionally,the DVB and MAH endow the NPs with reactive surface anhydride and pendant vinyl groups,and these particles could be further functionalized through reaction of these groups.A plausible pathway was proposed for the formation of PDVBMAH NPs.     

Layered magnetite nanoparticles modification – synthesis,structure, and magnetic characterization

Core-shell and multilayered nanoparticles based on magnetite core with different metallic spacing and over-layers are prepared in one pot synthesis and characterized. The spacer layers were made from Au, Cu or Ag precursors. The nanoparticles were fabricated by a modified chemical seed based method. The obtained nanoparticles were examined by X-ray diffraction, Energy-dispersive X-ray spectroscopy, Transmission Electron Microscopy, Differential Scanning Calorimetry and Infrared spectroscopy. Magnetic properties of the nanoparticles were tested by Mössbauer spectroscopy and Magnetometry. Magnetization and Mössbauer measurements show that the presence of the metallic layers influences the magnetic state of the particles. XRD and EDX confirm layered structures of nanoparticles. Proposed synthesis allows for fabrication of layered particles with controlled morphology and register properties changes which are related to the nature of each subsequent layer.     

The catalytic properties and stability of β-galactosidases from fungi

The catalytic activity of β-galactosidases from fungi Penicillium canescens and Aspergillus oryzae is maximum in a weakly acidic medium and does not depend on the presence of magnesium cations in the reaction medium. The enzyme from Aspergillus oryzae fungi is more active, and that from Penicillium canescens is stabler. One of stability indications is the presence of an induction period in the kinetic curves of thermal inactivation. This period disappears at 54°C for the enzyme from Aspergillus oryzae and at 59°C for the enzyme from Penicillium canescens. The temperature dependences of the effective rate constants for the inactivation of the tetrameric enzyme from Penicillium canescens show that the main reason for enzyme inactivation is the dissociation of oligomeric forms below 66°C (E _act = 85 kJ/mol) and enzyme denaturation at higher temperatures (E _act = 480 kJ/mol). The dissociation stage is absent for monomeric β-galactosidase from Aspergillus oryzae fungi, and the activation energy of inactivation is 450 kJ/mol over the whole temperature range studied (53–60°C).     

β-Cyclodextrin functionalized gold nanoparticles: characterization and its analytical application for l-tyrosine

β-Cyclodextrin functionalized gold nanoparticles (β-CD-Au NPs) were synthesized and characterized. The interaction of β-CD-Au NPs with l-tyrosine (l-Tyr) is studied by fluorescence and absorption spectroscopy. β-CD-Au NPs was found to remarkably quench fluorescence of l-Tyr at 305 nm. Experimental conditions including media acidity, temperature and concentration of buffer were examined for the inclusion formation. Furthermore, fluorescence resonance energy transfer occurred with Föster radius 2.39 nm. Apparent binding constants and corresponding thermodynamic parameters at different temperatures were calculated by Stern–Volmer equation and thermodynamic formula, respectively. The binding constant declines with the increasing temperature illustrating static quenching exists and the binding l-Tyr on β-CD-Au NPs is a spontaneous molecular interaction process in which entropy and Gibbs free energy decreases. Hydrophobic interaction and van der Waals forces could be in dominant action in the formation of the complex. The concentration of l-Tyr is proportional to decrease of the fluorescence intensity in the range of 0.02–1.5 μM with the detection limit (S/N = 3) of 1.6 nM. There is little interference from the coexisting substances normally used as the pharmaceutical main compositions. The proposed method combined the unique physical and chemical properties of the gold core with the molecular recognition ability of β-CD and possessed high sensitivity and good selectivety. It has been successfully applied to determination of l-Tyr in compound amino acid injection.     

Synthesis and characterization of nitrogen-doped TiO2 nanoparticles prepared by sol–gel method

The N-doped TiO₂ has been synthesized by sol?Cgel method, using titanium isopropoxide, isopropanol and an aqueous solution of ammonia with ratio 2:1:10. The concentrations used for the NH₃ aqueous solution were 3, 7, 10 and 15?%. The samples have been analysed by X-ray diffraction, electron microscopy (SEM and TEM) thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), micro-Raman spectroscopy and diffuse reflectivity. TEM, SEM, DSC and TGA showed that the morphology is influenced by the presence of N^3? ions but not by the concentration of the solution. Instead reflectance gave us a relation between values of the energy gap and the concentration of N^3? ions: the gap between valence and conduction band lowers as the concentration of NH₃ in the starting solution increases. From these results we can say that the properties of the material have been tuned by doping with nitrogen ions because the particles absorb more light in the visible range, and this is important for photovoltaic and photocatalytic applications.     

Synthesis and characterization of tellurium-doped CdO nanoparticles thin films by sol–gel method

In this work, tellurium (Te) doped CdO nanoparticles thin films with different Te concentrations (1, 3, 5, 7 and 10 %) were prepared by sol–gel method. The effects of Te doping on the structural, morphological and optical properties of the CdO thin films were systematically studied. From X-ray diffraction spectra, it has seen that all of thin films were formed polycrystalline and cubic structure having (111), (200) and (311) orientations. The structure of CdO thin films with Te-dopant was formed the unstable CdTeO₃ monoclinic structure crystal plane ( $ {\bar{\text{1}}\text{22}} $ 1 ¯ 22 ), however, the intensity of this unstable peak of the crystalline phase decreased with the increase of Te-doping ratio. The strain in the structure is also studied by using Williamson-Hall method. From FE-SEM images, it has seen that particles have homogeneously distributed and well hold onto the substrate surface. Additionally, grain size increases from 27 to 121 nm with the increase of Te-doping ratio. Optical results indicate that 1 % Te-doped CdO thin film has the maximum transmittance of about 87 %, and the values of optical energy band gap increases from 2.50 to 2.64 eV with the increase of Te-doping ratio. These results make Te-doped CdO thin films an attractive candidate for thin film material applications.     

Sulfonated polybenzimidazole membranes — preparation and physico-chemical characterization

The preparation of sulfonated polybenzimidazole by sulfuric acid treatment on pre-formed polybenzimidazole membranes was investigated. This polymer, which is originally a thermal resistant and insulating material is transformed by the chemical treatment into a proton conductor. The modified material is stable at temperatures close to 400°C. The proton conductivity of the sulfonated membrane at 160°C and 100% r.h. is 7.5×10⁻⁵ S/cm. The low conductivity is explained by protonation of nitrogen in the imidazolium ring, as evidenced by FT-IR analysis, which lowers the proton mobility. Hydrogen bridge bonds are formed between nitrogen in the imidazole and oxygen of sulfonic group creating a more regular structure in the material which becomes insoluble in polar solvent such as dimethyl sulfoxide. These modifications of the material have been observed in the X-ray diffraction patterns, which evidence an incipient crystalline structure of the sulfonated polybenzimidazole.     

Structural stability and electrochemical properties of Gd-doped ZrO2 nanoparticles prepared by sol–gel

Cubic, tetragonal and monoclinic Gd-doped zirconia nanoparticles with nominal composition Gd_xZr_1?xO₂ in the range 0 ≤ x ≤ 0.2, were prepared by annealing dried gels of Gd-containing zirconia at temperatures over the range between 450 and 1,300 °C. The synthesized zirconia-based nanoparticles with increased gadolinium load were characterized by X-ray powder diffraction, infrared and Raman spectroscopies, and transmission electron microscopy. The stabilization of the crystalline forms of Gd-doped ZrO₂ solid solutions depends on the amount of Gd dopant and the annealing temperature. For low Gd loads in Gd_xZr_1?xO₂ being x < 0.05, the tetragonal form is the single phase up to 1,100 °C, whereas the monoclinic is the crystalline form detected up to 1,300 °C. Within the range of compositions 0.05 ≤ x < 0.1, is the tetragonal the only stabilized zirconia crystalline structure over the whole range of temperature up to 1,300 °C. For higher Gd-contents, in the range 0.1 ≤ x ≤ 0.2, is the cubic zirconia form the only stable phase for the whole range of annealing temperatures. Solid-state electrochemistry of the gadolinium-doped zirconia performed by the voltammetry of microparticles approach allowed distinguishing different electrochemical answers of Gd cation associated with slightly different local coordination surrounding of cations. Enantioselective electrocatalytic effect of monoclinic Gd-doped ZrO₂ on the oxidation of l-(+)-tartaric acid and d-(?)-tartaric was also studied.     

Preparation and characterization of supported bimetallic gold–iron nanoparticles,and its potential for heterogeneous catalysis

Research on Chemical Intermediates - Bimetallic gold–iron catalysts supported on ZrO2 and TiO2 were prepared by under potential deposition. The characterization of the catalysts was performed...     

Synthesis and characterization of carbon-supported transition metal oxide nanoparticles — Cobalt porphyrin as catalysts for electroreduction of oxygen in acids

Unpyrolyzed, non noble metal catalysts for Oxygen Reduction Reaction (ORR), denoted MeOx–CoP/C, were obtained using a two-step procedure. The procedure consisted of a synthesis of carbon-supported transition metal (Me═Co, or Ni, or Fe) nanoparticles, followed by adsorption of cobalt porphyrin (CoP). TEM and XPS analyses confirm the formation of nanoparticles and the presence of transition metal oxides. Rotating disk electrode measurements showed that the as-synthesized materials exhibit catalytic ORR activity in acidic medium toward oxygen reduction, which is higher than that of cobalt porphyrin on carbon. This reveals that the metal oxide nanoparticles enhance the activity of the metalloporphyrin without being electroactive themselves. The catalytic activity follows the sequence: CoOx–CoP/C > NiOx–CoP/C > FeOx–CoP/C, showing the influence of nature of the transition metal on the enhancing effect. The presence of a cobalt center incorporated in the macrocycle was found to be essential to the oxygen reduction reaction, appearing thus to be the catalytic active site of the reaction. Our data suggest the ORR occurs at a single active site.     

Synthesis of fluorine doped tin oxide nanoparticles by sol–gel technique and their characterization

This article presents novel attempt to synthesis of fluorine doped tin oxide (FTO) nanoparticles by sol–gel technique. The synthesized FTO nanoparticles were obtained after calcination. Temperatures of calcination were 600 and 700 °C due to identify changes in the particles size growth. A DG/DTA and FTIR study identifies the oxide and formation of the nanopowders. The XRD studies confirm the tetragonal crystallite structure of fluorine doped tin oxide. The TEM image confirms the size of FTO particles in nanoscale. The electrical studies on FTO nanopowders results the decrease in resistivity profile with increasing calcinations. The optical band gap studies for sol–gel synthesis FTO nanoparticles is found to be in the range of 4.11–3.84 eV conforming decreasing optical band gap with increasing calcinating temperatures.