Separation of gallium and indium from ores matrix by sorption on Amberlite XAD-2 coated with PAN

A chelating sorbent obtained by adsorption of 1-(2-pyridylazo)-2-naphthol (PAN) on Amberlite XAD-2 was used for the preconcentration of Ga and In. The analytical characteristics of the chelating sorbent were investigated and optimun sorption conditions for these metals under dynamic conditions were established. A peristaltic pump is used to adjust the flow rate of the solution. Elements are collected from the column by using a mixture adjusted to a pH range of 4-7 and 6-12 by ammonia or ammonium chloride for Ga and In, respectively. The procedure developed was applied to the analysis of different ores.     

Complexation of transition metal ions on the surface of carboxyethylated aminopolysiloxanes

The effect of the nature of the sorbent matrix and the state of ions of some transition metals in solution on their sorption by carboxyethylated alumino-, zircono-, and titano-aminopolysiloxanes was studied. Modification of the aminopolysiloxane matrix with zirconia, alumina, or titania results in displacement of the optimal sorption ranges for copper(II), nickel(II), and cobalt(II) to alkaline pH. Comparison of the results of structural studies of the complexes of N-aryl-3-aminopropionic acids in solutions and compositions of equilibrium solutions upon sorption of metal ions from ammonia-acetate buffer systems demonstrated that metal ions are simultaneously coordinated by the functional groups of iminodipropionic acid, which are rigidly attached to on the polysiloxane matrix, and by monodentate molecular ligands (ammonia molecules) present in the buffer solution. A competitive influence of copper(II), nickel(II), and cobalt(II) on the sorption from mixed solutions was established.     

Separation of gallium and indium from ores matrix by sorption on Amberlite XAD-2 coated with PAN

A chelating sorbent obtained by adsorption of 1-(2-pyridylazo)-2-naphthol (PAN) on Amberlite XAD-2 was used for the preconcentration of Ga and In. The analytical characteristics of the chelating sorbent were investigated and optimun sorption conditions for these metals under dynamic conditions were established. A peristaltic pump is used to adjust the flow rate of the solution. Elements are collected from the column by using a mixture adjusted to a pH range of 4–7 and 6–12 by ammonia or ammonium chloride for Ga and In, respectively. The procedure developed was applied to the analysis of different ores. Received: 10 July 2000 / Revised: 21 September 2000 / Accepted: 23 September 2000     

Kinetics of the sorption of triterpene saponin by hypercrosslinked polystyrene

The kinetics of sorption of triterpene saponin by the polymer sorbent NM-200 is considered. The influence of the surface activity of glycoside on the rate of formation and structure of the adsorption layer on the sorbent’s surface is established. The rate-determining step of sorption is found to be diffusion into the sorbent grain. The value of the activation energy demonstrates the determining role of dispersion forces in the interaction between triterpene saponin and the polymer sorbent MN-200.     

Sorption studies of radionuclides on a modified mesoporous cerium(IV) silicate

Five different samples of a new sorbent, modified mesoporous cerium(IV) silicate have been prepared with various mole ratios of Si/Ce and Cetyltrimethylammonium bromide (CTMABr) as template. XRD, nitrogen sorption, SEM, IR, thermogravimetry and sorption of radionuclides have been studied. Separation of Hg(II)-Th(IV), Hg(II)-Zr(IV) and Rb(I)-Zr(IV) have been developed on columns of this novel sorbent.     

Preconcentration of lead, cadmium and zinc on silica gel loaded with diethyldithiocarbamate prior to their determination by flame-atomic absorption spectrometry

A silica gel sorbent loaded with sodium diethyldithiocarbamate has been developed for the preconcentration of lead, cadmium and zinc prior to their determination by flameatomic absorption spectrometry (FAAS). The sorption and desorption of the metal ions was studied under both static and dynamic conditions. The metal ions were quantitatively retained on the silica gel sorbent based on an equilibrium time of less than 1 min. In case of the batch method, the effects of pH, shaking time, amount of sorbent, and desorption time were investigated. Among the desorption agents studied, only EDTA in ammonium chloride/ammonia buffer yielded quantitative recoveries. Freundlich's sorption isotherms determined for each metal show that sufficient sorption ability is obtained. The column method allows the preconcentration of metal ions from large sample volumes (e.g. 200 mL) using a flow rate of 5 mL min^–1. The influence of foreign ions present in natural waters and saline solutions was examined. The reproducibility of the total analytical method, expressed as relative standard deviation (RSD) is 1.8, 0.5 and 0.6%, for lead, cadmium and zinc, respectively.     

Ion exchange of some transition metal cations on hydrated titanium dioxide in aqueous ammonia solutions

The adsorption of transition metal cations on hydrated titanium dioxide in complexing ammonia and amine solutions has been studied as a function of ammonia (amine) concentration. The relationships between the distribution coefficients and ammonia concentration as well as the effects of various amines on sorption of transition metals indicate that a coordinate bond is formed between the metal ions and the hydroxy groups of the sorbent. The distribution coefficients of silver(I) and cobalt(III), which form strong ammonia complexes in aqueous solutions, decrease with increasing concentration of ammonia already at concentrations exceeding 10^–3. mol·dm^–3. Cations of zinc, manganese and mercury which form much weakerammonia complexes do not exhibit any effect of ammonia concentration in the whole range investigated. In the case of sorption of macroamounts of ammonia or amine complexes of silver, the molecular sieve effect plays an important role. The differences in the affinity of hydrated titanium dioxide for ammonia solvates of various transition metal ions can serve as a tool for effective separation of these ions in ammonia solutions.     

Sorption of methanal by a weak basic anion exchanger

Peculiarities of the sorption of methanal on a polyfunctional anion exchanger are investigated. Based on the sorption isotherm, it is established that the distribution coefficient of the aldehyde in the ion exchanger-solution system depends exponentially on the concentration of the external solution. From breakthrough curves of sorption, the rate-determining stage of the absorption of the aldehyde in dynamic conditions is estimated. Structural changes in the sorbent phase saturated with methanal are supported by IR spectroscopy.     

Mesoporous silica SBA-15 functionalized with phosphonate and amino groups for uranium uptake

Mesoporous silicas have a very attractive ability of sorption and enrichment of metal ions due to their huge surface area and facile functionalization by organic ligands.In this work,phosphonate-amino bifunctionalized mesoporous silica SBA-15(PA-SBA-15) as U(VI) sorbent was fabricated through post-grafting method.The obtained mesoporous silica was characterized by SEM,XRD,NMR and nitrogen sorption/desorption experiments,which revealed the existence of ordered mesoporous structure with uniform pore diameter and large surface area.The adsorptivity of PA-SBA-15 for U(VI) from aqueous solution was investigated using batch sorption technique under different experimental conditions.The preliminary results show that the U(VI) sorption by PA-SBA-15 is very quick with equilibrium time of less than 1 h,and the U(VI) uptake is as large as 373 mg/g at pH 5.5 under 95 ℃.The sorption isotherm has been successfully modeled by the Langmuir isotherm,suggesting a monolayer homogeneous sorption of U(VI) in PA-SBA-15.The sorption is pH-dependent due to the pH-dependent charge of sorbent in the aqueous solution.The thermodynamics research shows that the sorption is a feasible and endothermic process.Based on these results,PA-SBA-15 could be a promising solid phase sorbent for highly-efficient removal of U(VI) ions from waste water and enrichment of U(VI) from a solution at a very low level.     

Preparation and analytical characterization of a chelating resin coated with 1-(2-pyridylazo)-2-naphthol

A chelating sorbent was obtained by deposition of 1-(2-pyridylazo)-2-naphthol on Amberlite XAD-4. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Zn, Fe, Cd, Ni, and Pb under static and dynamic conditions were determined. The sorbent was applied to analysis of river water. After group separation of traces of metals on the sorbent and subsequent elution with hydrochloric add, the metals were determined in the effluent by atomic-absorption spectrophotometry.     

Synthesis and analytical characterization of a chelating resin loaded with dithizone

A chelating sorbent loaded with dithizone was obtained by chemical reaction with styrene-DVB (5%) copolymer as matrix. The analytical characteristics of the sorbent were established and optimum sorption conditions for Ag, Cu, Cd, Pb, Ni, Co and Zn under static and dynamic conditions determined. The sorbent was applied to determination of copper and lead in river water and of silver in electrolytic copper. After separation of traces of metals on the sorbent and desorption with hydrochloric acid, the metals were determined in the effluent by atomic-absorption spectrophotometry.     

Study of the effect of oxidative-bisulfite modification of the cotton cellulose on its ion exchange properties

The effect of chemical modification on the sorption properties of cotton cellulose toward Cu(II) and Ni(II) ions was studied. The modification was carried out in two stages: oxidation of cellulose with the formation of dialdehydocellulose, followed by its sulfonation. The optimal conditions for modifying the cellulose to produce a sorbent capable to remove effectively the heavy metal ions from aqueous solutions of corresponding salts were elucidated. The modified sorbent exceeds the native cellulose in the sorption capacity (in terms of sorption maximum) about 3 times, therewith the time of extraction of heavy metal ions is reduced from 45 to 8 min. The high sorption properties are defined by the formation of new sorption sites -SO₃Na along with initially formed -COOH groups on the sorbent surface.     

Studying the sorption kinetics on peat ions of iron(III) and copper(II) from wastewater

The sorption kinetics on the peat of copper(II) and iron(III) ions from model solutions are studied. The sorption process takes place quickly and is almost complete after 20 minutes. Based on the processing of the experimental absorption curves of the equations of chemical kinetics and diffusion it is established that the sorption process is in the diffusion mode. The stage of the chemical interaction of the metal ions with the functional groups of peat also contributes to the overall speed of the process. The efficiency of the sorption process is determined and the possibility of Using peat as a sorbent for purifying wastewater from the copper( II) and iron(III) ions at industrial sites is shown.     

Influence of the preparation method on the textural properties of zirconia

Summary New composite sorbents &quot;chlorides of alkaline-earth metals confined to porous alumina&quot; were synthesized and tested for ammonia abatement in a fixed-bed flow adsorber at 25-300°C. It was found that the matrix modification with the salts leads to an increase in its dynamic sorption capacity in the row BaCl₂ < CaCl₂ < MgCl₂. This can be caused by a salt-ammonia interaction that results in the formation of ammonia complexes. The dynamic capacity was found to strongly decrease with temperature. The maximal sorption capacity was detected for a sorbent based on MgCl₂. It equals 58.6 and 11.6 mg/g at T = 25 and 300°C, respectively, or 3.2 and 0.6 mole of ammonia per 1 mole of the salt. The data obtained can be used for the analysis of the dynamic behavior of the new sorbents in flow systems for the ammonia removal from gas mixtures, which can be of high interest for gas separation, chemical engineering and catalysis.     

Comments on surface structure analysis by water and nitrogen adsorption

Specific surface area and pore size distribution are determined usually from adsorption isotherms at low temperatures using nitrogen or noble gases. These are not absolute parameters and the measuring methods are fraught with serious difficulties. General problems of sorption measurements and recent developments are discussed. To obtain information for practical purposes these measurements need to be supplemented by investigations of the sorbate/sorbent system used in practice. Results of the measurement of nitrogen and water vapour adsorption on different materials are compared. This revised version was published online in July 2006 with corrections to the Cover Date.     

Some thermodynamic peculiarities of the nonexchange sorption of phenylalanine on dissimilar anion exchangers

It is shown that the nonexchange sorption of phenylalanine on dissimilar anion exchangers occurs by the same mechanism, determined by the structure of the amino acid, while the absorbed amount of substance depends on the sorbent structure. It is established that the micelle formation and the phenylalanineanion exchanger sorption equilibrium depend on the amount and nature of functional groups in anion exchangers. It is shown that, in the systems under investigation, the nonexchange sorption constant is determined by the constant of phenylalanine micelle formation.     

Effect of phosphate on sorption of Eu(III) by montmorillonite

Eu(III) sorption by Na-montmorillonite, the principal component of bentonite, has been studied in absence and presence of phosphate under varying experimental conditions of pH, metal ion, phosphate and sorbent concentration. The sorption edge was found to shift to high pH with decreasing sorbent concentration indicating site heterogeneity on the clay. Eu(III) sorption by Na-montmorillonite was found to increase in presence of phosphate at lower sorbent concentration of 0.5 g/L while at higher sorbent loading no effect of phosphate was observed. ATR–FTIR spectroscopy has been used to understand transition from surface complexation to surface precipitation with decreasing sorbent concentration.     

Sorption properties of natural sorbent silica clay in relation to nickel cations

Sorption of nickel cations on natural sorbent silica clay was studied. The sorption isotherms were constructed and the quantitative characteristics of the process of sorption on a sorbent were determined.     

Estimation of the kinetic characteristics of sorption of an organic ion on a heterogeneous crosslinked polymer sorbent within the framework of a bidisperse model

For the sorption of rubomycin, an antitumor athracycline-type antibiotic, on BDM-12 carboxyl-containing heterogeneous crosslinked polymer sorbent, it was shown that the measured time dependences of the extent of process are determined by two characteristic times: τ₁ (in the range of short times) and τ₂ (at long times). A phenomenological theory of the kinetics of sorption on the heterogeneous sorbent was developed on the basis of a biporous sorbent model. The dependences of the characteristic times τ₁ and τ₂ on the sorbent grain radius were obtained. It was concluded that the theory makes predictions in good agreement with experimental data and allows calculating the most important kinetic parameters of sorption of organic ions on polymer sorbents: the time of diffusion of the sorbate into microgranules, the diffusion coefficient of the sorbate in transport pores, the effective coefficient of the sorbate diffusion into the heterogeneous sorbent, etc.     

Assessment of the sorption capacity and regeneration of carbon dioxide sorbents using thermogravimetric methods

Adsorption methods using solid sorbents are an alternative to the absorption technology in the processes of purification gases from carbon dioxide. There is a need to rapidly assess the suitability of sorbents for use it in PSA, TSA, or VPSA installations. Important parameters which determine the quality of the sorbent are the sorption capacity of sorbent, selectivity to CO₂ and the possibility of regeneration. This paper presents the results of sorption/desorption of CO₂ study on the impregnated porous materials using thermogravimetric methods. Thermogravimetry allows for rapid assessment of sorption capacity and regeneration of the sorbents. Specially selected temperature program allowed to determine the sorption capacity of sorbents depending on the concentration of CO₂ in the gas mixture and temperature. Degree of sorbent purification was determined in desorption process.