青霉素钾对CTAB胶束性质的影响

研究了青霉素钾对十六烷基三甲基溴化铵（CTAB）的cmc、CTAB胶束聚集数和扩散系数的影响.研究结果表明，青霉素钾(Pen K)的加入使得CTAB胶束的第一cmc、第二cmc上升；CTAB球形胶束的聚集数下降,扩散系数增加；CTAB棒状胶束的聚集数增加,扩散系数降低.     

头孢唑酮与Triton X-100缔合体系的相互作用

抗生素头孢唑酮的加入使得非离子表面活性剂Triton X-100的表面活性降低. ¹H-NMR的结果表明，头孢唑酮增溶于胶束极性基团附近.头孢唑酮与Triton X-100胶束的结合常数随Triton X-100含量的增加而下降，但头孢唑酮在Triton X-100胶束相和水连续相之间的分配系数不随Triton X-100含量变化而变化.     

孔雀绿与CTAB胶束的相互作用

以CTAB胶束模拟生命体系,用UV-Vis和荧光光谱等技术研究了孔雀绿与CTAB胶束的相互作用.结果表明,孔雀绿自发地定位于CTAB胶束栅栏层,使得胶束聚集数增加,胶束的微环境极性I1/I3下降.孔雀绿与CTAB胶束之间的结合常数K和孔雀绿在胶束相与水连续相之间的分配系数KD均随孔雀绿浓度增加而降低,表明孔雀绿与CTAB胶束之间的相互作用随孔雀绿浓度增加而降低.     

Gemini 阴离子表面活性剂水溶液的聚集性质

合成了一种Gemini阴离子表面活性剂,测定了其临界胶束浓度cmc和cmc时的表面张力γcmc,与传统的单基表面活性剂相比,其临界胶束浓度降低了一个数量级,具有突出的降低水的表面张力的效率;研究了该种Gemini表面活性剂的浓度对于胶束聚集数的影响,结果表明,随着浓度的增加,胶束聚集数出现了一个极大值,同时观察到液晶微相的生成.     

正戊醇对CTAB/KBr胶束体系流变性的影响

报道了正戊醇对CTAB/KBr胶束体系流变性的影响。结果表明：在0.01mol.dm^-^3CTAB(十六烷基三甲基溴化铵)溶液中,正戊醇促使CTAB/KBr胶束体系的粘度增大至一最大值,然后降低在0.08mol.dm^-^3CTAB/KBr的溶液中,正戊醇能促使该胶束体系呈现粘弹性。根据动态荧光法测定的胶束聚集对以上结果进行了解释。     

激光光散射和电子自旋共振技术研究十二烷基硫酸钠与聚乙烯吡咯烷酮的相互作用

应用动态激光光散射(DLS)和电子自旋共振(ESR)测定研究了单长链表面活性剂十二烷基硫酸钠(SDS)与聚乙烯吡咯烷酮(PVP)相互作用.DLS测定结果表明:SDS在水中形成动力学半径约为61 nm的胶束聚集体,PVP在水中卷曲成动力学半径约为12 nm的线圈,DLS确定的SDS临界胶束浓度(cmc)为6.4×10^-3 mol·L^-1, PVP-SDS具有强的相互作用,PVP分子缠绕在SDS胶束聚集体的周围,屏蔽了SDS胶束聚集体表面碳氢基团与连续水相的接触;ESR结果表明:自由基探针5-doxyl stearic acid在SDS形成胶束聚集体后,从一个较强极性的连续相转变到较小极性的胶束聚集体内核中,胶束聚集体内核的微粘度较纯水的大,SDS与PVP复合聚集体的微观粘度较SDS胶束溶液的大,ESR确定SDS的cmc为6.8×10^-3 mol·L^-1.     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

苯甲醇对CTAB/KBr胶束体系流变性及CTAB分子1HNMR谱影响的研究

报道了苯甲醇对CTAB/KBr胶束体系粘度的影响,利用1HNMR法研究了苯甲醇在CTAB胶束中的增溶位置.结果表明,在KBr盐溶液中,随着苯甲醇的加入,0.01mol/LCTAB胶束体系的粘度增大至最大值.对CTAB分子的1HNMR分析表明,少量的苯甲醇增溶在棒状胶束的界面,促使胶束体积增大和相互缠结,体系的粘度随之增大;当苯甲醇浓度较高时,将增溶在胶束的栅栏层靠近极性头一侧,胶束发生棒-球转变和解缠,体系的粘度降低.     

阳离子碳氟表面活性剂研究Ⅰ:水溶液中的胶束特性及生长

利用动态光散射(Dynamic Light Scattering,DLS)、瞬态电双折射(Transient Electric Birefringence,TEB)和粘度测定方法研究了部分氟代阳离子表面活性剂氟代-2-羟基十一烷基二乙羟基甲基氯化铵(diethanolheptadecafluoro-2-undecanol methylammonium chloride,C8F17CH2CH(OH)CH2NCH3(C2H4OH)2Cl,DEFUMACl)水溶液的胶束化特性.结果表明DEFUMACl的临界胶束浓度cmc为3.8 mmol·L-1.稀溶液中随着DEFUMACl浓度的增加或者无机盐NaCl的加入,DEFUMACl胶束由球形向棒状转变,其转变浓度,即第二临界胶束浓度(cmcⅡ)为0.2 mol·L-1;电导测定的反离子(Cl-)结合度为0.72.利用球形和棒状胶束模型确定的DEFUMACl胶束聚集数分别为45和335.     

β-CD对SDS胶束生成与特性的影响

通过胶束的扩散系数D、聚集数N和β-CD在SDS胶束与水连续相间的分配系数P的测定,研究了β-CD对SDS胶束特性的影响.结果表明,β-CD浓度较小时,随着β-CD的加入,其在SDS胶束相中的分配增大,胶束的扩散系数D与聚集数N均降低.β-CD浓度较大时,其在水连续相中的分配增加,对SDS胶束的扩散系数D与聚集数N的影响显著降低.SDS浓度小于第一CMC,β-CD与SDS单体形成1∶1的包合物;SDS浓度大于第一CMC,β-CD与SDS形成1:8的混合球形胶束.     

Interaction between biosurfactant surfactin and cationic surfactant cetyl trimethyl ammonium bromide in mixed micelle

An anionic/cationic mixed surfactant aqueous system of surfactin and cetyl trimethyl ammonium bromide (CTAB) at different molar ratios was studied by surface tension and fluorescence methods (pH 8.0). Various parameters that included critical micelle concentration (cmc), micellar composition (X ₁), and interaction parameter (β ^m) as well as thermodynamic properties of mixed micelles were determined. The β ^m was found to be negative and the mixed system was found to have much lower cmc than pure surfactant systems. There exits synergism between anionic surfactin and cationic CTAB surfactants. The degree of participation of surfactin in the formation of mixed micelle changes with mixing ratio of the two surfactants. The results of aggregation number, fluorescence anisotropy, and viscosity indicate that more packed and larger aggregates were formed from mixed surfactants than unmixed, and the mixed system may be able to form vesicle spontaneously at high molar fraction of surfactin.     

荧光探针法研究双子型阳离子表面活性剂与明胶的相互作用

利用荧光探针法研究了双子型阳离子表面活性剂与明胶的相互作用,考察了此类表面活性剂的分子结构和明胶对临界胶团浓度(cmc)、胶团聚集数(N_agg)和胶团微极性的影响.结果表明,当双子型阳离子表面活性剂的疏水基增长时,cmc减少,N_agg增加,胶团的微极性降低;加入明胶后,双子型阳离子表面活性剂的N_agg减少,cmc和胶团微极性增加.     

明胶和阳离子表面活性剂CTAB的相互作用

采用电导法、荧光法、pH等方法研究了明胶与十六烷基三甲基溴化铵 (CTAB)的相互作用.结果表明,在CTAB/明胶 /水体系中,明胶浓度的增大使得CTAB分子的cac₁,cac₂,cmc值均上升,胶束的聚集数下降.冷冻蚀刻透射电镜实验(FFTEM)的结果证实了明胶分子与CTAB分子之间形成了复合物,随着CTAB浓度的增加,结构从线状、卷曲、珍珠项链状、棒状至网状依次变化.     

Micellization and related behavior of binary and ternary surfactant mixtures in aqueous medium: cetyl pyridinium chloride (CPC), cetyl trimethyl ammonium bromide (CTAB), and polyoxyethylene (10) cetyl ether (Brij-56) derived system

Mixed micelles formed with cetyl pyridinium chloride (CPC), cetyl trimethylammonium bromide (CTAB), and polyoxyethylene (10) cetyl ether (Brij-56) mixed in different combinations in aqueous medium have been studied in detail by tensiometric, conductometric, calorimetric, spectrophotometric, and fluorimetric techniques. Different physicochemical properties such as critical micellar concentration (cmc), micellar dissociation, energetic parameters (free energy, enthalpy, and entropy) of micellization, interfacial adsorption, and micellar aggregation number have been determined. The results have been analyzed in terms of the equations of Clint, Motomura, Rosen, Rubingh, Blankschtein et al., and Rubingh and Holland for justification of the experimental cmc, determination of micellar composition parameters, quantification of interaction among the mixed micelle components, and estimation of their activity coefficients.     

Surface and bulk properties of aqueous decyltrimethylammonium bromide-hexadecyltrimethylammonium bromide mixed system

The aqueous mixed system decyltrimethylammonium bromide (C(10)TAB)-hexadecyltrimethylammonium bromide (C(16)TAB) was studied by conductivity, ion-selective electrodes, surface tension, and fluorescence spectroscopy techniques. The mixture critical micelle concentration, cmc(*), aggregation number, N( *), and micelle molar conductivity, Lambda(M)(cmc), showed that the system aggregation is strongly nonideal. Both cmc(*) and N( *) results were analyzed with two different procedures: (i) the regular solution theory on mixed micelles or Rubingh's theory, and (ii) by the determination of the partial critical micelle concentration of the amphiphile component i in the presence of a constant concentration of the other amphiphile component, cmc(i)( *). The Rubingh procedure gives micelles richer in C(16)TAB than the overall mixtures, while procedure (ii) gives micelles having the same composition as in the complete surfactant mixture (alpha(C(10)TAB). Mixed micelles are larger than pure surfactant ones, with nonspherical shape. Using a literature model, the cause of the synergistic effect seems to be a reduction of the hydrocarbon/water contact at the micelle surface when mixed micelles form. Conductivity and ion-selective electrodes indicate that highly ionized premicelles form immediately before the cmc(*). The air/solution interface is strongly nonideal and much richer in C(16)TAB than the composition in the bulk. When micelles form there is a strong desorption from the air/solution interface because micelles are energetically favored when compared with the monolayer.     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Properties of polyethylene glycol (23) lauryl ether with cetyltrimethylammonium bromide in mixed aqueous solutions studied by self-diffusion coefficient NMR

NMR self-diffusion coefficient measurements have been used to study the properties of polyethylene glycol (23) lauryl ether (Brij-35) with cetyltrimethylammonium bromide (CTAB) in the mixed aqueous solutions with different mole fractions of CTAB. By fitting the self-diffusion coefficients to the two-state exchange model, the critical micelle concentrations of the two solutes in the mixed solutions (cmc*1 and cmc*2) were obtained. The critical mixed micelle concentrations (cmc*) were then evaluated by the sum of cmc*1 and cmc*2, which are in good agreement with the results measured by the surface tension method. The cmc* values are lower than those of the ideal case of mixing, which indicates that the behavior of the CTAB/Brij-35 system is nonideal. Moderate interactions between CTAB and Brij-35 in their mixtures can be deduced from the interaction parameters (betaM) based on the cmc* obtained by the NMR self-diffusion method. The compositions (x1) of the mixed micelles at different total surfactant concentrations were also evaluated. By using these results, a possible mechanism of mixed micellar formation and a picture of the formation of nonsimultaneous CTAB/Brij-35 binary mixed micelle were proposed. In contrast to the case of CTAB/TX-100 system, Brij-35 molecules have a tendency to form micelles first at any mole fraction of CTAB. The mixed micellar self-diffusion coefficients (Dm) increase slightly at lower CTAB molar ratios, and then speed up with increasing CTAB mole fraction.