ENERGY TRANSFER-ENHANCED CHEMILUMINESCENCE OF ADAMANTANONE (n,π*) AND ESTER (π,π*) SINGLET AND TRIPLET EXCITED STATES IN THE THERMOLYSIS OF SILYLOXYARYL-SUBSTITUTED SPIROADAMANTYL DIOXETANES†

Abstract— The thermal generation of singlet and triplet excited states from silyloxyaryl-substituted spiroadamantyl dioxetanes lab and the adamantylidineadamantane dioxetane (1c) was investigated by direct and enhanced chemiluminescence (CL). 9,10-Diphenylanthracene (DPA) and 9-fluorenone were used as energy acceptors in the singlet-singlet (S-S), naphthalene and europium chelate Eu(TTA)₃Phen (TTA = thenoyltrifluoroacetone, Phen = 1,10-phenanthroline) in the triplet-triplet (T-T) and 9,10-di-bromoanthracene (DBA) in triplet-singlet (T-S) energy transfer experiments. The direct chemiluminescence observed in the thermolysis of dioxetanes lab consisted of fluorescence derived from the singlet-excited adamantanones 2a,b. In the presence of naphthalene, selective T-S energy transfer with DBA (napthalene as quencher) displayed the adamantanone triplets 2a,b and with Eu(TTA)₃Phen (naphthalene as mediator) also the silyloxyaryl ester 3 triplets. From the Stern-Volmer constants (k_TNT_T⁰) the triplet lifetimes t⁰_t of these triplet state products were assessed. By using the Hastings-Weber standard, the total triplet excitation yield (φ^t) was estimated to be ca 20%. The energies of the first excited singlet and triplet states of the adamantanones 2a,b and the silyloxyaryl ester 3, the products of the thermally induced decomposition of dioxetanes la-c , were determined by semiempirical calculations (AMI-based configuration interaction), which included explicitly solvent effects on the excitation energies in terms of a self-consistent reaction field approach. The calculations revealed that the first excited singlet and triplet states of the adamantanones 2a,b are expectedly n,π*-type excitations while the silyloxyaryl ester 3 possesses π,π* character. The semiempirical computations suggest that excitation of the adamantanones 2a,b as well as the silyloxyaryl ester 3 is feasible in the thermolysis of the spiroadamantyl dioxetanes lab , which has been confirmed by the experimental energy transfer studies.     

Synthesis of bicyclic dioxetanes tethering a fluororescer through an ω-carbamoyl-substituted linker and their high-performance chemiluminescence in an aqueous system

Bicyclic dioxetanes 3 and 4 tethering a fluorescein or 4-(benzothiazol-2-yl)-3-hydroxyphenyl moiety through a linker were synthesized by the use of dihydrofuran-intermediate 5 or its advanced intermediate 6. These dioxetanes underwent base-induced decomposition to effectively give light due to intramolecular energy-transfer from an excited oxidobenzoate to a tethered fluorophore. Although the chemiluminescence efficiency Φ^CL values for 3 and 4 were only ca. 2-fold greater than that for parent 2 in a TBAF/acetonitrile system, these values were 30–550-fold greater than that for 2 in a NaOH/H₂O system. Such marked increase of Φ^CL was hardly observed by the simple addition of 25 or 26 as a model of a tethered fluorescer.     

Bicyclic dioxetanes bearing a 4-(benzoazol-2-yl)-3-hydroxyphenyl moiety: chemiluminescence profile for base-induced decomposition in aprotic medium and in aqueous medium

Four bicyclic dioxetanes bearing a 4-(benzothiazol-2-yl)-3-hydroxyphenyl or 4-(benzoxazol-2-yl)-3-hydroxyphenyl group were synthesized. These dioxetanes underwent base-induced decomposition with accompanying emission of light with high efficiency in NaOH/H₂O as well as in tetrabutyl ammonium fluoride (TBAF)/acetonitrile. Among them, benzothiazol-analogs decomposed faster in the aqueous solution than in acetonitrile.     

Singulett-Sauerstoff-induzierte spaltung von spiro[1,8a]dihydroindolizinen

The ¹O₂-induced degradation of spiro[1,8a]dihydroindolizines $\text{1}$ - a new photochromic system - may involve dioxetanes as intermediates giving fulvenylesters $\text{3}$.     

Calorimetric measurements of sodium chloride dihydrate (hydrohalite)

Calorimetric measurements of sodium chloride dihydrate NaCl·2H₂O (mineral name hydrohalite) were carried out with using DSC. Heat capacity from 190 to 250 K was measured and found to increase from 109 to 137 J mol^?1 K^?1. The enthalpy of formation of hydrohalite from solid ice and halite at 273.15 K was derived from the thermal effect of melting/decomposition in DSC measurements and found to be close to ??1.8 kJ mol^?1. The same DSC results show clearly that the upper temperature limit for the existence of hydrohalite is several degrees greater than the current value of 273.15 K accepted for the peritectic decomposition of hydrohalite. The phase diagram of the NaCl–H₂O system needs correction.

     

Preparation of LaNiO3 perovskite by oxalate and carbonate precursor method for utilization as catalyst for high-temperature decomposition of N2O

The mixed oxide LaNiO₃ with perovskite structure was prepared by two relatively new and unconventional methods including preparation and thermal decomposition of mixed metal oxalate or carbonate precursors. The intermediates were prepared by reaction in a highly concentrated suspension (paste). The thermal decomposition conditions of these intermediates were described, and the final calcination temperatures were determined, which were done using thermal analysis methods and X-ray diffraction. During the decomposition of mixed carbonates, one-phase LaNiO₃ is produced directly, and in case of decomposition of oxalates, a mixture of LaNiO₃ and La₂O₃ is produced due to the formation of La₂O₂CO₃ during the heating. Catalytic decomposition of nitrous oxide at high temperature (650–930 °C) and high loading (GHSV?=?350,000 h^?1) has shown high LaNiO₃ activity, even at lower temperatures. The results were compared with the same compound obtained by co-precipitation and by solid-state reaction. Methods of preparation based on decomposition of oxalate and carbonate intermediates lead to the preparation of materials with appropriate composition, morphology, specific surface and high catalytic activity.

     

Thermal decomposition kinetics of diethyl dithiocarbamate complexes of copper(II) and nickel(II)

Thermogravimetric (TG), derivative thermogravimetric (DTG) and differential thermal analysis (DTA) curves of CuL₂ and NiL₂ (L^?=diethyl dithiocarbamate anion) in air are studied. The main decomposition temperature ranges are: For CuL₂, DTG 250–350°, DTA 300–320° and for NiL₂, DTG 290–390°, DTA 360–400°. Mass loss considerations at the main decomposition stages indicate conversion of the complex to sulphides. Mathematical analysis of TG data shows that first order kinetics are applicable in both cases. Kinetic parameters (energy and entropy of activation and preexponential factor) are reported.

     

Base-induced decomposition of dioxetanes bearing a 3-hydroxyphenyl moiety substituted with a proton-donating group at the 4-position: effect of intramolecular hydrogen bonding on decomposition rate and chemiluminescence efficiency

Bicyclic dioxetanes bearing a 3-hydroxyphenyl moiety substituted with an amidomethyl group (3a-c) or a hydroxymethyl group (4) were synthesized. On treatment with tetrabutylammonium fluoride in CH₃CN, they decomposed rapidly with accompanying emission of blue light. Their decomposition rates and chemiluminescence efficiencies were found to be affected by the intramolecular hydrogen bonding between the phenoxy anion and the adjacent proton-donating group.     

Oxidative Rearrangement Coupling Reaction for the Functionalization of Tetrahydro‐β‐carbolines with Aromatic Amines

The observation of an unexpected oxidative rearrangement coupling reaction led to the development of a novel method for the efficient functionalization of tetrahydro‐β‐carbolines (THβCs). The treatment of THβCs with photogenerated singlet oxygen (¹O₂) afforded unstable dioxetanes, which underwent further transformation to form new bonds in the presence of trifluoroacetic acid. This operationally simple protocol exhibits broad functional‐group tolerance and is suitable for the late‐stage functionalization of complex druglike molecules.     

Vinyl Polymerization. 269. Polymerization of Methyl Methacrylate Initiated by p,p'-Dimethoxydiphenyldiazomethane

Using p,p'-dimethoxydiphenyldiazomethane (DMDM) as initiator, the polymerization of methyl methacrylate (MMA) in benzene or in bulk was carried out. The initial rate of polymerization, R_p, was found to be expressed by the following equation:

R_p = k[DMDM]^0.53 [MMA]^0.84

The polymerization was confirmed to proceed by a radical mechanism. The over-all activation energy for the polymerization in benzene was calculated as 19.3 kcal/mole. The rate of thermal decomposition of DMDM was also measured in benzene and the rate equation was obtained as follows:

k_d (sec^?1) = 1.0 × 10¹⁵ exp (^?29.1 kcal/RT) (for 50-80°C)

Explanations of these observations are discussed in connection with those of the preceding papers.     

Intramolecular charge-transfer-induced chemiluminescent decomposition of 1,2-dioxetanes bearing a phenylmethanide anion

Dioxetanes (1) bearing a phenyl moiety substituted with a methylene or methine having an electron-withdrawing group(s) (-CH₂-Ew or -CH(X)-Ew) and dioxetane (2) bearing a 3-(1-cyanoethenyl)phenyl group were synthesized. Treatment of dioxetanes (1) with tetrabutylammonium fluoride (TBAF) caused their decomposition with accompanying emission of light with maximum wavelength at 530-758 nm. The Michael addition of a bis(methoxycarbonyl)methanide anion to dioxetane (2) produced initially an unstable dioxetane bearing a phenylmethanide anion, decomposition of which gave light with maximum wavelength at 710-740 nm. Intramolecular cyclopropanation without decomposition of the dioxetane ring took place concurrently for the Michael reaction-induced decomposition of 2 with the bis(methoxycarbonyl)chloromethanide anion.     

The Destruction of Carbon Tetrachloride Dissolved in Water in a Dielectric Barrier Discharge in Oxygen

The kinetics of decomposition of tetrachloromethane (TCM) in its aqueous solutions and the kinetics of decomposition products formation was investigated under the action of DBD at atmospheric pressure in oxygen in a falling-flow reactor. The range of initial concentrations of TCM was 25–325 μmol/l, the discharge power—2–11 W and O₂ flow rates—1–3 cm³/s. It is shown that the kinetics of the TCM decomposition can be described by the equation of pseudo-first kinetic order. The rate constant depended weakly on the discharge parameters and was?~?5 s^?1. The energy efficiency of the decomposition, depending on the parameters, was 0.1–1.3 molecules per 100 eV. When the residence time of the solution with the discharge zone is more than 1 s, it is possible to achieve almost 100% degree of TCM decomposition. It is shown that the main products of the TCM decomposition in the liquid phase are aldehydes and Cl^? ions, and in the gas phase—the molecules CO and CO₂. The results for energy efficiency are compared with the results obtained in other AOP’s processes (Fenton process, photocatalytic process, the radiation process by the action of high-energy electron flux). It is shown that the action of the DBD is more effective than the action of the above processes.

     

Evidence of quasi-intramolecular redox reactions during thermal decomposition of ammonium hydroxodisulfitoferriate(III), (NH4)2[Fe(OH)(SO3)2]·H2O

Synthesis of ammonium hydroxodisulfitoferriate(III), (diammonium catena-{bis(μ ²-sulfito-κO,κO)-μ ²-hydroxo-κ²O}ferrate(III) monohydrate) (NH₄)₂[Fe(OH)(SO₃)₂]·H₂O (compound 1) and its thermal behavior is reported. The compound is stable in air. Its thermal decomposition proceeds without the expected quasi-intramolecular oxidation of sulfite ion with ferric ions. The disproportionation reaction of the ammonium sulfite, formed from the evolved NH₃, SO₂ and H₂O in the main decomposition stage of 1, results in the formation of ammonium sulfate and ammonium sulfide. The ammonium sulfide is unstable at the decomposition temperature of 1 (150 °C) and transforms into NH₃ and H₂S which immediately forms elementary sulfur by reaction with SO₂. The formation and decomposition of other intermediate compounds like (NH₄)₂S_nO_x (n = 2, x = 3 and n = 3, x = 6) results in the same decomposition products (S, SO₂ and NH₃). Two basic iron sulfates, formed in different ratios during synthesizing experiments performed under N₂ or in the presence of air, have been detected as solid intermediates which contain ammonium ions. The final decomposition product was proved to be α-Fe₂O₃ (mineral name hematite).

     

Exploration of the thermal decomposition of zinc oxalate by experimental and computational methods

Zinc oxalate dihydrate has been synthesized by precipitation method and characterized by FT-IR, XRD and SEM-EDAX. The kinetics of dehydration and decomposition were studied by non-isothermal DSC technique in the N₂ atmosphere at different heating rates: 4, 6, 8 and 10 K min^?1. The product of thermal decomposition, ZnO has been characterized by UV, TEM, SEM-EDAX and XRD and found that the particles are in nanometer range. The activation energy for thermal dehydration and decomposition was calculated by various isoconversional methods. Furthermore, structure and reactivity of zinc oxalate have also been investigated using B3LYP/631+g (d, p) level of theory with the help of Gaussian 09W software. The theoretical investigation indicates that most probably the compound decomposes to ZnO along with the evolution of CO₂ and CO.

     

Decomposition of Cyanogen Chloride by Using a Packed Bed Plasma Reactor at Dry and Wet Air in Atmospheric Pressure

The decomposition rate of CNCl in a BaTiO₃-filled Packed Bed Plasma Reactor was studied as a function of AC input power, power frequency, residence time in the reactor, and inlet flow rate. The decomposition rate was compared with those of CH₃CN and CCl₂CHCl. Under the condition of 6.7 Wh/m³ specific energy den- sity, the decomposition rate of CNCl was found to be 50%, which is lower than those of CH₃CN and CCl₂CHCl at the same or similar conditions. At a higher frequency of the power input system, the decomposition rate of inlet gas becomes lower due to a decrease in field strength for the same level of power. And, under the same level of input power, a higher decomposition rate was obtained at an increased residence time. The relation between gas decomposition rates stemmed from the electron–molecule collision and bounding energy within the molecule. The decomposition ratio of CNCl was lower than those of CCl₂CHCl and CH₃CN because the bond strength of the weakest bond in the molecule is higher. In order to test the decomposition efficiency of CNCl with catalytic packing material in a plasma reactor, the catalyst of γ-Al₂O₃ and Pt/γ-Al₂O₃ was packed in the packed bed plasma reactor. Although byproducts were formed, the plasma-catalyst hybrid reactor containing Pt/γ-Al₂O₃ showed a higher efficiency in CNCl decomposition as shown in the decomposition rate of above 99% in 0.3 kWh/m³.     

Isotope Tracing Experiment on the Mechanism of O2 on the Over-Thermal Decomposition of SF6

In gas-insulated equipment, partial over-thermal faults may occur due to poor contact and other reasons. The main insulation medium SF₆ may decompose under over-thermal conditions and produce harmful products such as SO₂ and HF, which can damage the equipment and reduce the insulation strength of the equipment. The method of decomposition component analysis can monitor the operating status of equipment without interference from machinery, noise and optics, and provide early warning or reminder of faults, but the premise is that the decomposition mechanism of SF₆ must have been fully and in-depth understood. In the decomposition process of SF₆, O₂ has a significant effect, but the mechanism of the effect is still unclear. Based on the isotope tracing method, this paper uses ¹⁸O₂ instead of ordinary O₂ for overheating experiments. Through the quantitative detection of the labeled products in the product and the abundance of ¹⁸O isotope in the products, the effect of O₂ on the formation of the main decomposition products was analyzed. The work makes the reaction process and mechanism of SF₆ with trace oxygen under over-thermal conditions basically clear, which provides an important theoretical basis for on-line monitoring and fault diagnosis of equipment based on chemical analysis methods.

     

Synthesis and fluoride-induced chemiluminescent decomposition of bicyclic dioxetanes substituted with a 2-hydroxynaphthyl group

Five bicyclic dioxetanes bearing a 2-hydroxynaphthyl group, 1aA-1eA, were synthesized and their chemiluminescent decomposition was examined by the use of tetrabutylammonium fluoride (TBAF) as a base in DMSO. It was found that these dioxetanes hold completely the ‘odd/even’ relationship between the substitution pattern of hydroxy as a trigger on the naphthalene ring and their chemiluminescent efficiency, and that dioxetane 1aA exhibited chemiluminescence with the highest efficiency among those for the oxynaphthyl-substituted dioxetanes hitherto known. The significant change in chemiluminescent efficiency depending on the substitution pattern was clarified to be attributed to the marked change in singlet-chemiexcitation efficiency for charge-transfer-induced chemiluminescence (CTICL) of 1aA-1eA. In respect of the rate of CTICL-decomposition, ‘odd/even’ relationship was observed for 1aA-1dA.     

Thermal decomposition of C3-substituted peroxyacyl nitrates

The gas phase thermal decomposition rates of C₃-substituted peroxyacyl nitrates, RC(O)OONO₂ have been measured at ambient temperature (287–298 K) and 1 atm. of air. Two saturated compounds (PnBN, R = n-C₃H₇- and PiBN, R = i-C₃H₇-) and two unsaturated compounds (MPAN, R = CH₂=C(CH₃)- and CPAN, R = CH₃CH=CH-) have been studied. In the narrow temperature range studied, thermal decomposition rates for PiBN, PnBN and MPAN exhibited linear Arrhenius behavior with, in units of 10^-4 s^-1, and at 298 K, k = 2.2 for PiBN, 2.3 for MPAN, and 2.7 for PnBN. The thermal decomposition rate of CPAN was 1.6 x 10^-4 s^-1 at 291.6 K and 1.73 x 10^-4 s^-1 at 293.2 K. These thermal decomposition rates are of the same magnitude as that for PAN, R = CH₃. Implications for the atmospheric persistence of C₃- substituted peroxyacyl nitrates are briefly discussed.     

Mössbauer and photocatalytic studies of CaFe2O4 nanoparticle-containing aluminosilicate prepared from domestic waste simulated slag

The relationship between local structure and visible-light activated photocatalytic effect of simulated domestic waste slag glass–ceramics (R-NaWSFe) was investigated. The largest pseudo-first-order rate constant of 9.75?×?10^?3 min^?1 was estimated for methylene blue decomposition test under the visible-light irradiation using R-NaWSFe with additional 30 mass% of Fe₂O₃ heat-treated at 900 °C for 100 min. The reason for the high photoactivity of this sample was mainly due to nanoparticles of CaFe₂O₄ and α-Fe₂O₃ confirmed by the Mössbauer spectrum measured at 77 K. It is concluded that the nanoparticles of magnetic components in silica are essential for exhibiting visible-light activated catalytic effect.