Adsorption behavior of copper and cyanide ions at TiO2-solution interface

Adsorption of both copper and cyanide ions in the absence and in the presence of their complexes at TiO2-solution interfaces was investigated. The objective of this study was to demonstrate the possibility of removing heavy metal ions, exemplified by Cu(II), from aqueous solution in the presence of a ligand, e.g., CN-. Several parameters such as pH and Cu(II) and CH- ion concentration that may affect the magnitude of copper and cyanide adsorption were studied. The equilibrium of Cu-CN speciation distribution in solution and stability constant calculations have been investigated to determine the adsorption behavior of Cu(II). Results revealed that free Cu(II) ions (in the absence of CN-) were completely separated at pH8, while the adsorption of free cyanide ions, in the absence of Cu(II), reached a maximum value of 48% at pH 7. For Cu-CN complexes, the presence of CN- in excessive amount with respect to Cu(II) retarded the adsorption of Cu(II). This is attributed to the formation of multivalent anionic cyano-copper complexes such as Cu(CN)2-(3) and Cu(CN)(3-)4.     

Adsorption behavior of rhodamine B on Rhizopus oryzae biomass

The removal of a carcinogenic dye rhodamine B (C. I. 45170) from wastewater by biomass of different moulds and yeasts is described. Among all of the fungal species tested, the biomass of Rhizopus oryzae MTCC 262 is found to be the most effective. Dye adsorption reaches maximum with the biomass harvested from the early stationary phase of growth. The optimum temperature and pH for adsorption are observed to be 40 degrees C and 7.0, respectively. The adsorption rate is very fast initially and attains equilibrium after 5 h. The adsorption isotherm follows the Langmuir isotherm model satisfactorily within the studied dye concentration range. Of the different metabolic inhibitors tested, 2,4-ditrophenol (DNP) and N,N'-dicyclohexylcarbodiimide (DCCD) decrease dye adsorption by approximately 30% suggesting the role of energy metabolism in the process. Spectrophotometric study indicates that the removal of rhodamine B by R. oryzae biomass involves an adsorption process. Scanning (SEM) and transmission (TEM) electron microscopic investigations have been carried out to understand the probable mechanism of the dye-biomass interaction.     

TG-pyrolysis and FTIR analysis of chocolate and biomass waste

Four waste streams from a chocolate factory were examined in view of their possible usage as a fuel: cocoa shell, jute bags, and two qualities of chocolate waste (milk, white). Thus, proximate and ultimate analyses and thermogravimetric analyses coupled with Fourier transform infrared (TG-FTIR) analyses were conducted. It was observed that milk and white chocolates have similar thermal properties; chocolate has a high calorific value (24.5 MJ kg^?1). Pyrolysis of chocolate proceeds in two stages: the first from 190 to 300 °C and the second from 300 to 518 °C. During the first stage, alkaloids, such as theobromine and caffeine, evolve, and sugar decomposes, releasing acids, CO₂, and water. During the second pyrolysis stage, cocoa butter and proteins decompose releasing volatile organics such as esters, acids, amides, phenols, CH₄, CO, etc. Polyphenols such as catechin, procyanidins, etc. decompose during both pyrolysis stages. Generally, chocolate waste yields less CO₂ and CO than cocoa shell and jute. In principle, it appears to be a promising source of energy and could be utilized by both co-firing and pyrolysis, producing fuels or chemicals.     

Adsorption equilibrium and kinetics of copper ions and phenol onto modified adsorbents

The adsorption equilibrium and kinetics of single and binary component copper ions and phenol onto powdered activated carbon (PAC), alginate beads and alginate-activated carbon beads (AAC) were studied. Adsorption equilibrium data for single component copper ions and phenol onto the adsorbents could be represented by the Langmuir equation. Multicomponent equilibrium data were correlated by the extended Langmuir and ideal adsorbed solution theory (IAST). The IAST gave the best fit to our data. The amount of copper ions adsorbed onto the AAC beads in the binary component was greater than that of phenol. The internal diffusion coefficients were determined by comparing the experimental concentration curves with those predicted from surface diffusion and pore diffusion model.     

Biosorption of copper ions from aqueous solutions by Spirulina platensis biomass

In this study, the economically important micro-alga (cyanobacterium) Spirulina platensis was used as biosorbent for the removal of copper from aqueous solutions. The cyanobacterium was exposed to various concentrations of copper and adsorption of copper by the biomass was evaluated under different conditions that included pH, contact time, temperature, concentration of adsorbate and the concentration of dry biomass. Increased adsorption of copper by the non-living biomass was recorded with gradually increasing pH, and a maximal uptake by the biomass was observed at pH 7. The adsorption of copper was found to increase gradually along with decrease in biomass concentration. Biosorption was found to be at a maximum (90.6%), in a solution containing 100 mg copper/L, at pH 7, with 0.050 g dry biomass and at 37 °C with 90 min of contact time. Analysis of the spectrum obtained with atomic absorption spectrophotometer (AAS), indicated that the adsorbent has a great potential to remove copper from aqueous media contributing to an eco-friendly technology for efficient bioremediation in the natural environment.     

Adsorption behavior of human serum albumin on ATR crystal studied by in situ ATR/FTIR spectroscopy and two-dimensional correlation analysis

The time-dependent adsorption behavior of human serum albumin (HSA) onto an ATR (ZnSe) crystal was investigated by two-dimensional (2D) correlation analysis and in situ ATR-FTIR spectroscopy following the secondary structural changes in the amide I region. The two major advantages of the generalized 2D correlation spectroscopy were first tested. New extra bands have been resolved by 2D correlation analysis, but they are either artifacts or a result of uncertainty on band position in generalized 2D correlation spectroscopy. The sequence of the intensity variations of the three sub-bands under the amide I band profile deduced from the 'sequential order' rules is contradictory to the experimental observation, which supports our argument on the 'sequential order' rules in generalized 2D correlation spectroscopy (H. Huang, Anal. Chem., 2007, 79, 8281-8292). Subsequent detailed analysis on the in situ ATR-IR spectra shows that the adsorption process of HSA on the ATR (ZnSe) crystal in aqueous solutions can be divided into three stages: no obvious conformational transitions in the first 25 min of adsorption of HSA molecules; large structural rearrangement from α-helix to random coil and short extended chain structures in a fully cooperative way from 25 to 50 min of adsorption; and further slight conformational transformation of short extended chain and turn structures into random coil with no sequential order after 50 min of adsorption.     

Adsorption of copper(II) ions from aqueous solutions on alumina industrial wastes

Equilibrium adsorption of copper(II) ions on red mud (alumina industrial wastes) modified by various methods was studied. The effect exerted by the nature the modifier (NaHSO₄, NaCl + HCl, and H₂SO₄) on the sorption activity of red mud was determined.     

Adsorption behavior of cesium on montmorillonite-type clay in the presence of potassium ions

The adsorption behavior of Cs ions on a montmorillonite-type clay was investigated in the presence of potassium ions, using a radiotracer technique. The initial concentration of K⁺ added to the CsCl was between 10^-4 and 10^-1 mol/l. The addition of K⁺ to the CsCl solution at different concentrations (10^-6-10^-2 mol/l) reduced the amount of Cs⁺ adsorbed on clay. The maximum ratio of Cs⁺ exchanged, calculated from a linearized form of Langmuir plot was in agreement with the ion exchange isotherms of Cs-K ions. Sorption energy evaluated from the graph of corrected selectivity coefficients vs. equivalent fraction of Cs in the solid phase was compared to the energy values obtained from Dubinin-Radushkevich (D-R) isotherms. Freundlich isotherm parameters were used to characterize a site distribution function, which provides information about the affinity ratio of the adsorption sites of Cs⁺ and K⁺ ions. The ion exchange isotherm of Cs-K systems exhibited a Langmuir type curve for all K⁺ concentrations.     

Adsorption and desorption of binary mixtures of copper and mercury ions on natural and crosslinked chitosan membranes

Copper and mercury ion adsorption on chitosan membranes was investigated in batch systems (with both single and binary solutions). The Langmuir model and its extensions (extended Langmuir, Jain-Snoeyink, and Langmuir-Freundlich models) were tested for the modeling of experimental data. Chitosan membranes presented more affinity for Hg ions than for Cu ions. The decrease of the amount of metal adsorbed on natural chitosan in binary systems (compared to single-metal solutions) showed the competition effects between the two metal ions. For glutaraldehyde-crosslinked chitosan and epichlorohydrin-crosslinked chitosan, the mixture effect was present, producing unexpected result such as higher adsorption capacities, when compared to the monocomponent solution of each metal. The desorption of the metals was also investigated, and copper and mercury ions could be selectively recovered using a combined process by using NaCl and H₂SO₄ as eluant.     

Adsorption of lanthanoid ions on calcite

The adsorption of 14 trivalent lanthanoid ions and yttrium ion (denoted by Ln3+) on calcite surfaces was investigated under various solution conditions of pH (pH = 6.8-7.8) and calcium ion concentration (pCa = -log[Ca2+]= 2.0 and 3.0), and different surface conditions of calcite crystals (well-developed and rough surfaces). The lanthanoid ions were equilibrated in a solution of ionic strength 0.1 mol dm-3(NaCl) saturated with calcite at 25.0 degrees C using excess (solid) calcite crystals suspended in solution. The concentrations of the lanthanoid ions on the calcite crystals (C(cry)/mol kg-1) and in solution (C(soln)/mol dm-3) were determined by means of inductively coupled plasma-mass spectrometry (ICP-MS). It is found that the distribution ratio (D=C(cry)/C(soln) decreases as the atomic number of the lanthanoid increases showing the so called Tetrad Effect. D values increase with increasing pH, whereas they are independent of the calcium ion concentration (i.e., carbonate ion concentration). These results indicate that lanthanoid ions are adsorbed on the calcite surface together with hydroxide ions, i.e., the adsorption of hydroxo-complexes. The heavy lanthanoid ions (Er3+ to Lu3+) are adsorbed as monohydroxo-complexes, (Ln(OH)2+), whereas those of the light lanthanoids are predominantly adsorbed as dihydroxo-complexes (Ln(OH)2+). Other lanthanoids show competitive adsorption reactions of mono- and dihydroxo complexes. Both successive adsorption constants of hydroxo complexes increase with decreasing atomic number of the lanthanoid. The rough surface of calcite is quite active and the distribution ratio of the lanthanoid ions on the rough surface is much higher than that on the well-developed crystalline surface. Rates of adsorption of lanthanide ions were measured and mechanisms are being discussed     

Adsorption of oxygen on copper and silver

Oxygen adsorption on silver has been studied using field-emission microscopy. It has been shown that adsorption is an activated process which proceeds on rough planes through the stage of formation of adsorption islands, O_ads. Using a semi-empirical interacting bonds method, the heat of oxygen adsorption has been estimated in a dissociative from on the (111), (100) and (201) planes of silver and on the (111) and (100) planes of copper.

---

. , _. (111), (100), (201) (111), (100) .

     

Adsorption of hexavalent uranium on biomass by-product

The effectiveness of the uranium removal by olive cake from aqueous solutions has been demonstrated in batch type experiments under normal atmospheric conditions. The adsorption capacity has been evaluated by using both Langmuir and Freundlich isotherms. The optimum pH regarding for uranium adsorption on olive cake is 7.5. The amount of adsorbed uranium is governed by the amount of active sites on the biomass surface indicating an inner sphere complexation. The adsorption of uranium on olive cake is an endothermic and entropy-driven process and does not depend on the ionic strength of the solution.     

铜在乳状液膜体系中的迁移行为

近年来膜分离技术在环境治理方面得到广泛应用。本文研究了铜在span80-TBP（磷酸三丁酯）-煤油-NH3液膜分离体系中的迁移行为。用TBP作为载体,在溶液中迁移时,在外相与膜相界面上形成中性络合物后穿过膜相,在膜相与内相界面上络合物再与NH3反应,生成铜氨络离子,释放出来的TBP又返回膜相。     

Adsorption of copper(II) ions by keratin/PA6 blend nanofibres

Mats of randomly oriented nanosized filaments, prepared by electrospinning wool keratin/polyamide 6 blends in formic acid, were evaluated as adsorbents of Cu²⁺ ions. The adsorption capacity was evaluated as a function of the nanofibre composition, specific surface area, initial metal ion concentration, contact time and pH of the solution. The adsorption tests revealed that keratin-based nanofibres highly adsorb Cu²⁺ ions and the adsorption capacity increases with increasing the specific surface area of the nanofibre mats. The maximum adsorption capacities for nanofibre mats containing 50%, 70% and 90% (wt.%) of keratin were found to be 61.7 (mg/g), 90 (mg/g) and 103.5 (mg/g), respectively. The Cu²⁺adsorption onto the keratin rich nanofibres is highly pH-dependent and the optimum pH was found above the isoelectric point of keratin. The experimental data fit the pseudo second-order kinetic model. Infrared analysis demonstrated the formation of complexes between Cu²⁺ ions and keratin that involve terminal free carboxyl groups of the protein.     

Adsorption of calcium and magnesium ions on surfaces

The adsorption of calcium and magnesium ions at trace levels in solution on borosilicate glass and polypropylene is described. The rate and extent of adsorption increases with increasing pH and the process is not completely reversible. The apparent energies of activation for the adsorption of calcium and magnesium ions on borosilicate glass are 17.5 and 10.5 kJ mol^?1, respectively. The corresponding half-lives are 568 and 127 h. For polypropylene the half-lives increase to 5775 and 537 h, respectively.     

FTIR Studies of the Adsorption of Acetic Acid on Silicas

A range of cesium doped silica samples (0.15 – 0.90 mmol g^–1) have been characterized using a combination of deuterium exchange and adsorption of acetic acid. FTIR results show a strong correlation between the carboxylate formation on acetic acid adsorption and catalyst activity. Cesium loadings of > 0.3 mmol g^–1 do not give any increased acetic acid adsorption, suggesting a saturation of the silica exchange capacity. Deuterium exchange studies demonstrate that 35% of the surface silanol groups on the fresh silica are rapidly exchanged with deuterated water at room temperature.     

Adsorption of hydrogen on reduced copper chromite

Temperature programmed desorption and volumetric methods in static conditions were used to study hydrogen adsorption on the surface of metallic copper particles produced by the partial reduction of copper chromite CuCr₂O₄ with hydrogen. In the temperature range 300-573 K and in the range of medium surface coverages by hydrogen, the main state of adsorbed hydrogen reveals the heat of adsorption q= 78 kJ/mol and activation energy of adsorption E _a = 69 kJ/mol. In the temperature range 77-300 K, an adsorption state with lower heat and activation energy was found, indicating a non-uniformity of the copper surface within ca. 8% of the total number of surface sites. This revised version was published online in June 2006 with corrections to the Cover Date.     

Adsorption behaviour of metal ions on hydroximate resins

Some new chelating ion-exchange resins containing a hydroxamic acid moiety attached to a divinylbenzene styrene (DVBS) copolymer, i.e. glycine hydroximate in DVBS (GH-DVBS). anthranilic acid hydroximate in DVBS (AAHDVBS), malonic acid dihydroximate in DVBS (MAH-DVBS) and iminodiacetic acid dihydroximate in DVBS (IDAAH-DVBS). have been synthesized and their various physicochemical characteristics studied. The degree of retention of metal ions by the resins at equilibrium has been determined in terms of the molar distribution coefficient (k(d)). In general, the resins having a dihydroximate moiety are found to be more efficient compared to monohydroximate resins. However, it is of interest to note that the monohydroximate derivative of amino acid (GH-DVBS) showed better metal retention capability than the dihydroximate of carboxylic acid (MAH-DVBS). The selectivity of the resins for transition and highly charged metal ions is quite high compared to that for alkaline earth metals. All the synthesized resins can be utilized for the separation of a mixture of metal ions because the differences in the distribution coefficient values are large enough to permit good separations on columns. However, the GH-DVBS resin was tried for the separation of copper cobalt and copper nickel mixtures at pH 5.5 using the column mode of operation.     

Adsorption of selected ions on hydrous cerium oxide

Hydrous cerium oxide was synthesized and laboratory study was conducted to address its applicability for decontamination of barium, strontium, molybdenum, europium, iodine, samarium and cesium ions from radioactive liquid wastes using radiotracer technique. The adsorption of Ba(II), Sr(II), Mo(II), Eu(II), I(I), Sm(III) and Cs(I) on hydrous cerium oxide has been investigated as a function of pH, concentration and temperature of the adsorptive solution and the result obtained show that these parameters affect the extent of adsorption. The ion-exchange capacity decreased at higher temperatures which could be due to decrease of active sites as well as hydrophilic properties of surface adsorbent. Hydrous cerium oxide shows relatively high adsorption in acidic and neutral media towards the radiotracers studied, which can be attributed to large hydrated radius and ion exclusion effect.