猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

电感耦合等离子体质谱法(ICP-MS)测定稀土矿中钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钪量

通过用四酸与微波消解法溶解样品对比,建立了用硝酸、盐酸、氢氟酸、高氯酸分解样品,采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿中16种元素含量。方法采用_¹⁰³Rh作为内标消除干扰,确定了最优测定条件,16种稀土元素检出限为0.0029-0.0099ng/mL,测定范围为0.0005-0.020%。精密度试验、加标回收试验及标准物质检测,结果验证了方法的可行性及准确性。该方法简单易操作,结果可靠,能满足实验分析要求。     

ICP-AES法同时测定玻璃组份中的Ca、Mg、Ti、Fe、Pb、Cd、Al、Si、B、Zn、Cu元素

建立了一种用电感耦合等离子发射光谱(ICP-AES)法测定玻璃成份的简便、快速、准确、精密度好的方法．研究了样品的处理、标准样品的配制、谱线干扰等问题,并采用和基体匹配的方法消除基体的影响,进行了标准样品的分析、对照、精密度等试验,均取得了满意的结果．     

Determination of Y,Sm, Eu,Gd, Dy,Ho, Er in high purity terbium oxide by ICP-AES

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was employed to determine Y, Sm, Eu, Gd, Dy, Ho and Er in high purity terbium oxide. Terbium oxide was dissolved in 0.5 mol/l HNO₃ and nebulized into the plasma generated by a 56 MHz RF generator at 1.5 kW output power. Using a Jobin-Yvon 1-m Czenry-Turner high resolution, high dispersion scanning monochromator, lines mutually interference-free as well as free of interference from the matrix Tb were chosen for the seven analytes. A set of standards containing the analytes in the concentration range 0.01–1.0 gmg/ml with 1 mg/ml Tb was used for calibration. It was necessary to apply background correction to the gross analyte line intensities in order to obtain linear calibration plots for the analytes.     

3,3,6,6-四甲基-9-邻氯苯基-1,8-二氧代-3,4,5,6,7,9-六氧化氧杂蒽的合成和晶体结构

标题化合物C23H25对O3Cl是由邻氯苯甲醛与5，5-二甲基1，3-环己二酮在N，N-二甲基甲酸腹中反应而得。结构通过单晶X-射线衍射法确定，其晶体属于单科晶系，空间群=1632。晶体结构用直接法解出，使用全矩阵最小二乘法对原子参数进行修正，最后的偏离因子为R=0．054，Rw一0．063。在晶体结构中，吡喃环与苯环之间的两面角为92．43°。     

电感耦合等离子体原子发射光谱法测定70钛铁中锰、磷、铜、铬、镍、钼、钒和铝

提出了用电感耦合等离子体原子发射光谱法(ICP-AES)测定70钛铁中共存的8种杂质元素(锰、磷、铜、铬、镍、钼、钒、铝)。试验表明:试样宜用浓盐酸3mL及浓硝酸3mL溶解,且在制作工作曲线时应加入相同量的酸溶解基体金属(即所加入的纯铁粉和纯钛粉),所选用的8种元素的分析谱线均为检出限低、且光谱干扰小或易于扣除者。制作工作曲线时采用基体匹配法,从而消除基体干扰,方法中8种元素的检出限(3s/b)在0.002～0.02mg·mL-1范围内。按所提出方法分析了一个70钛铁标样(YSBC15602),共测定了11次,上述8种元素的测定结果与已知值相符,测定值的相对标准偏差(n=11)在0.74%～4.11%范围内。     

ICP–AES法测定铬镍不锈钢中锰、铬、镍、硅、磷、铜、钼的含量

建立电感耦合等离子体原子发射光谱(ICP–AES)法测定铬镍不锈钢中锰、铬、镍、硅、磷、铜、钼7种元素含量的方法。试样用盐酸与硝酸混合酸溶液溶解,采用溶解国家标准样品的方法制备校准曲线溶液,确定了元素最佳分析谱线。各元素的含量在其测试范围内与原子发射强度呈良好的线性关系,线性相关系数不小于0.999,7种元素的检出限在0.000 3%~0.003 0%之间。该方法应用于铬镍不锈钢标准样品的测定,测定值与认定值相符,测定值的相对标准偏差在0.12%~1.15%之间(n=8)。应用于铬镍不锈钢样品测定时,加标回收率在90%~110%之间。该方法操作简便、迅速,可满足日常铬镍不锈钢中多元素含量的检测需要。     

Determination of Ca, K, Mg, Na, sulfate, phosphate, formate, acetate, propionate, and glycerol in biodiesel by capillary electrophoresis with capacitively coupled contactless conductivity detection

In this work, a new method employing capillary electrophoresis (CE) for the determination of several species in biodiesel is introduced. The concentrations of inorganic species (Na⁺, K⁺, Ca²⁺, Mg²⁺, SO₄²⁻, and PO₄³⁻) and glycerol are of interest to the regulatory authorities due to their ability to form undesirable compounds in engines. Additionally, other species of low molecular weight (e.g., acetate, formate, and propionate) are of interest because they contribute towards increasing the acidity. These species are formed by the degradation of biodiesel and cause damage to engines and the environment. The cation separation was performed in background electrolyte (BGE) composed of 30 mmol L⁻¹ of 2-(n-morpholino)ethanesulfonic acid (MES)/L-histidine (His), pH 6. The separation of anionic species was carried out in similar BGE with 0.2 mmol L⁻¹ cetyltrimethylammonium bromide (CTAB) added. For glycerol, a neutral species, its oxidation with periodate was employed. This well-known reaction is specific to polyols and generates iodate. The amount of iodate produced by the reaction was determined by CE. The separation was carried out in approximately 1 min using BGE composed of 30 mmol L⁻¹ acetic acid, pH 3. The analytical parameters evaluated were: linearity (r > 0.99), the RSD values for area and migration time were < 3.4% and 0.9%, respectively, and recovery was in the range of 89 to 107%.     

KCl-NaCl(1:1mol)-RECl3熔体的电导率(RE=La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu、Y、Ce族、Y族)

用交流电桥法测定了熔融KCl-NaCl(1:1摩尔)-RECl₃的电导。比电导的温度函数表达式如下: κ=A+B(t-700) κ:比电导(Ω^-1·cm^-1);t:温度(700—850℃); A、B:本文给出的常数。讨沦了实验值与计算值的偏差,当稀土氯化物在熔体中的浓度为10—50重量百分数时可能形成了络合物。     

Determination of benomyl, diphenyl, o-phenylphenol, thiabendazole, chlorpyrifos, methidathion, and methyl parathion in oranges by solid-phase extraction, liquid chromatography, and gas chromatography

A simple and rapid method was developed for determination of benomyl, diphenyl (DP), o-phenylphenol (OPP), thiabendazole (TBZ), chlorpyrifos, methidathion, and methyl parathion in whole oranges. These compounds were extracted from a mixture of samples and anhydrous sodium acetate with ethyl acetate. The ethyl acetate extract was concentrated and cleaned up by passing through tandem solid-phase extraction columns consisting of anion-exchange and primary/secondary amine bonded silica. The eluate was concentrated and volume was adjusted with methanol for subsequent liquid chromatography (LC) and gas chromatography (GC). Benomyl (as methyl-2-benzimidazole carbamate, MBC), DP, OPP, and TBZ residues were determined by LC with fluorescence detection. Recoveries at 3 fortified levels (0.1, 1, and 10 micrograms/g) ranged from 63.9 to 97.4%, with coefficients of variation (CVs) of 1.6 to 15.5%. Limits of detection (LODs) were 0.01 microgram/g for DP, OPP, TBZ and 0.05 microgram/g for benomyl. Chlorpyrifos, methidathion, and methyl parathion residues were determined by GC with flame photometric detection. Recoveries ranged from 90.4 to 97.0%, with CVs of 2.1 to 5.9%. LODs were 0.005 microgram/g for chlorpyrifos and methyl parathion, and 0.01 microgram/g for methidathion.     

ICP-AES法测定铝中铁、硅、铜、镓、镁、锌、锰和钛

用 50g L氢氧化钠溶液溶解铝样品 ,硝酸 (1 1 )酸化 ,以ICP AES测定其中铁、硅、铜、镓、镁、锌、锰和钛等 8种杂质元素。     

光度法快速测定不锈钢中的铬、镍、钼、钛、锰

试样用等体积硝酸和盐酸混合酸溶解,用高氯酸将Cr(Ⅲ)氧化为Cr(Ⅵ),用定量Fe(Ⅱ)将Cr(Ⅵ)定量还原为Cr(Ⅲ),用铬酸"剩余光度法"测定铬,丁二酮肟光度法测定镍,硫氰酸盐光度法测定钼,变色酸(1,8-二羟基萘-3,6-二磺酸)光度法测定钛,高锰酸光度法测定锰。测定结果与标准值基本一致,铬、镍、钼、钛、锰测定结果的相对标准偏差分别为0.2%、0.3%、1.5%、2.0%、2.0%。     

Synthesis of New Polyfused Thienopyrimidine,Thienopyridine, Thienothiazine,Thienoxazine, and Thienodiazepine Derivatives

3,4-Diamino-2-carbethoxy-5-cyanothieno(2,3-b)thiophene (1) was treated with ethylenediamine to afford 3,4-diamino-2,5-bi[2-(4,5-dihydro-1H-imidazole-2-yl]-thieno(2,3-b)thiophene 2 , which in turn was treated with chloroacety chloride to give bis[imidazolothieno diazepine] derivative 3 and with each of p-chlorobenzaldehyde, triethyl orthoformate, and Lawesson's reagent (LR) to yield bis[imidazolothienopyrimidine] derivatives 4-6 . Compound 1 was subjected to Mannich reaction to afford Mannich bases 7 and 8a , b . The later products ( 8a , b ) were treated with malononitrile yielding 9a and 9b . Treatment of compound 1 with CS 2 , NaOH and CH 3 I produced compounds 10 and 11 . The reaction of compound 10 with each of o-aminothiphenal, o-phenylenediamen, hydrazine hydrate, and phenylhydrazine afforded compounds 12a , b , 13a , b . Compound 1 was allowed to react with CS 2 , phenyl (benzoyl)isothiocyanate and phenylisocyanate to get the described products 14-19 , respectively. On reacting compound 1 with ethylcyanoacetate thieno(2,3-b)pyridine derivative 21 was obtained through the intermediate 20 . Finally, compound 1 was treated with malononitrile to yield compound 22 .     

Mild, powerful, and robust methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively

We developed two efficient practical methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively. The present mild and robust reaction was performed by two separate methods both by combining cheap and readily available amines, N-methylimidazole, and N,N,N′,N′-tetramethylethylenediamine (TMEDA). Method A uses catalytic N-methylimidazole and TMEDA with an equimolar amount of K₂CO₃, whereas Method B uses equimolar amounts of N-methylimidazole and TMEDA. The salient features are as follows. (i) With regard to reactivity, Method B was superior to Method A for esterification and thioesterification, whereas cost-effective Method A was superior to Method B for amide formation. (ii) Amide formation proceeded smoothly between acid chlorides and less nucleophilic and stereocongested amines such as 2,6-dichloroaniline. (iii) This protocol was applied to the successful synthesis of two agrochemicals, bromobutide and carpropamid.     

ICP-AES法同时测定锰矿石中铁、铝、钛、钙、镁、磷、钡、铅的含量

锰矿石样品用HNO3-HF-HClO4酸溶除硅后,对采用ICP-AES法测定其中的铁、铝、钛、钙、镁、磷时,同时测定钡、铅的相关条件进行了试验。主要对酸溶样能否分解重晶石或天青石等含钡矿物进行了探讨,测定了3个国家级标准样品。测定结果与标准值吻合。用标准加入法测得的钡和铅的回收率分别为96．0％-100．5％,97．1％～100．0％。用该法对含钡量较高的澳大利亚锰矿进行分析,测定结果的相对标准偏差为0-82％,并将测定结果与X荧光光谱法测定结果进行了比对。     

电感耦合等离子体发射光谱法测定REACH法规涉及产品中铅、铬、钴、砷、锡、铝、锆、钼和硼

采用电感耦合等离子体原子发射光谱法对REACH法规涉及产品中铅、铬、钴、砷、锡、铝、锆、钼和硼的含量进行测定。0.2g样品经微波消解处理,聚合物材质试样以8mL硝酸和2mL过氧化氢为消解试剂;无机非金属材质试样以6mL硝酸、2mL过氧化氢和2mL氢氟酸为消解试剂。各元素的方法检出限均低于15mg·kg-1。方法的加标回收率在82.4%～108%之间,测定值的相对标准偏差(n=7)在3%～6%之间。     

X射线荧光光谱法快速测定黑铜中的铜、砷、锑、铋、铅、镍、锌和锡

建立X射线荧光光谱法快速测定黑铜中的铜,砷,锑,铋,铅,镍,锌和锡等多种元素含量的方法。采用自制的黑铜样品作为标准样品建立标准工作曲线。实验确定了样品加工时最佳的铣样速度及谱线重叠干扰的校正方法,并用理论影响系数校正基体干扰。试验结果表明,各元素的工作曲线线性关系较好,线性相关系数均大于0.996。各元素的检出限在17~47μg/g之间。测定结果的相对标准偏差为0.038%~2.73%(n=7)。两个样品的测定结果与标准分析方法的测定结果相符。该方法具有较好的准确度和精密度,分析速度快,能满足炉前快速分析的需要。     

Direct determination of four fluoroquinolones,enoxacin, norfloxacin,ofloxacin, and ciprofloxacin,in pharmaceuticals and blood serum by HPLC

A rapid, accurate and sensitive method has been developed for the quantitative determination of four fluoroquinolone antimicrobial agents, enoxacin, norfloxacin, ofloxacin and ciprofloxacin, with high in-vitro activity against a wide range of Gram-negative and Gram-positive organisms.A Kromasil 100 C(8) 250 mm x 4 mm, 5 microm analytical column was used with an eluting system consisting of a mixture of CH(3)CN-CH(3)OH-citric acid 0.4 mol L(-1) (7:15:78 %, v/v). Detection was performed with a variable wavelength UV-visible detector at 275 nm resulting in limits of detection: 0.02 ng per 20 microL injection for enoxacin and 0.01 ng for ofloxacin, norfloxacin and ciprofloxacin. Hydrochlorothiazide (HCT) was used as internal standard at a concentration of 2 ng microL(-1). A rectilinear relationship was observed up to 2 ng microL(-1) for enoxacin, 12 ng microL(-1) for ofloxacin, 3 ng microL(-1) for norfloxacin, and 5 ng microL(-1) for ciprofloxacin. Separation was achieved within 10 min. The statistical evaluation of the method was examined by performing intra-day (n=8) and inter-day precision assays (n=8) and was found to be satisfactory with high accuracy and precision. The method was applied to the direct determination of the four fluoroquinolones in human blood serum. Sample pretreatment involved only protein precipitation with acetonitrile. Recovery of analytes in spiked samples was 97+/-6% over the range 0.1-0.5 ng microL(-1).     

五氯代-12H-双苯并[1, 3, 2]二氧磷杂八环的合成与化学

以双(2-羟基-3,5-二氯苯基)甲烷(4)与PSCl3关环,高收率地得到2,4,6,8,10-五氯-6-硫-12H-双苯并[d,g][1,3,2]二氧磷杂八环(5)。5与酚在无水K2CO3及铜粉存在下,或与醇在醇钠存在下反应,生成2,4,8,10-四氯-6-硫-6-芳氧基-12H-双苯并[1,3,2]二氧磷杂八环(6),或6-烷氧基的类似物(7)。5与醇在三乙胺存在下反应的产物为2,4,8,10-四氯-6-硫-6-羟基-12H-双苯并[1,3,2]二氧磷杂八环三乙胺盐(8)。8在DMSO中回流则氧化为它的氧类似物9。     

3,3,6,6-四甲基-4a-羟基-9-邻甲氧基苯基-1,8-二氧代-2,3,4,4a,5,6,7,8,9,9a-十氢化-1H-氧杂蒽的合成和晶体结构

标题化合物C24H30O5是由邻甲氧基苯甲醛与5，5-二甲基-1，3-环己二酮在N，N-二甲基甲酰胺中反应而得。结构通过单晶X-射线衍射法确定，其晶体属于单斜晶系，空间群C2／c，a=33．942（6），b=7273（1），c=22667（4）A，β=128．989（9）°，Mr=398．50，V=4349（1）A3，Dc=1．2179·cm-3，Z=8，μ（MoKa）=840mm－1，F（000）=1712。晶体结构用直接法解出，经用全矩阵最小二乘法对原子参数进行修正，最后的偏离因子为R=0.043，Rw=0．052。在晶体结构中，存在一个分子间氢键。