Green biosynthesis and characterization of zinc oxide nanoparticles using Corymbia citriodora leaf extract and their photocatalytic activity

ABSTRACT

We reported a green and simple method for biosynthesizing zinc oxide nanoparticles (ZnO NPs) using Corymbia citriodora leaf extract as reducing and stabilizing agent. SEM, EDX, XRD, UV–VIS spectroscopy, Raman spectroscopy and TGA have been used for characterizing the biosynthesized ZnO NPs. The results indicating the ZnO NPs synthesized by C. citriodora leaf extract have high purity and the average size is 64?nm. The photocatalytic activity of the ZnO NPs has been investigated by degradation methylene blue under visible light irradiation. Due to the smaller size, the biosynthesized ZnO NPs showed an excellent photocatalytic performance.     

Synthesis and characterization of copper nanoparticles by reducing agent

Cu nanoparticles were synthesized by solution reduction process successfully. The influence of parameters on the size of Cu nanoparticles was studied and the referential process parameters were obtained. The morphology and structure of the synthesized Cu nanoparticles were characterized by transmission electron microscopy (TEM), powder X-ray diffraction (XRD), QELS data, infrared spectroscopy (IR) and solid state UV. The average size of nanoparticles was found between 15 ± 2 nm.     

Antioxidant and antibacterial activity of silver nanoparticles biosynthesized using Chenopodium murale leaf extract

Silver is known for its antimicrobial effects and silver nanoparticles are gaining their importance due to their antimicrobial activities. The aims of the current study were to use plant extract for the biosynthesis of silver nanoparticles and to evaluate their antibacterial and antioxidant activity in vitro. The results indicated that silver nanoparticles (AgNPs) can be synthesized in a simple method using Chenopodium murale leaf extract. The TEM analysis showed that the sizes of the synthesized AgNps ranged from 30 to 50 nm. The essential oil of C. murale leaf extract was formed mainly of α-Terpinene, (Z)-Ascaridole and cis-Ascaridole. The total phenolic compounds and total flavonides were higher in AgNPs-containing plant extract compared to the plant extract. AgNPs-containing leaf extract showed a higher antioxidant and antimicrobial activity compared to C. murale leaf extract alone or silver nitrate. It could be concluded that C. murale leaf extract can be used effectively in the production of potential antioxidant and antimicrobial AgNPs for commercial application.     

Green synthesis of silver nanoparticles using olive leaf extract and its antibacterial activity

The silver nanoparticles (AgNPs) synthesized using hot water olive leaf extracts (OLE) as reducing and stabilizing agent are reported and evaluated for antibacterial activity against drug resistant bacterial isolates. The effect of extract concentration, contact time, pH and temperature on the reaction rate and the shape of the Ag nanoparticles are investigated. The data revealed that the rate of formation of the nanosilver increased significantly in the basic medium with increasing temperature. The nature of AgNPs synthesized was analyzed by UV–vis spectroscopy, X-ray diffraction, scanning electron microscopy and thermal gravimetric analysis (TGA). The silver nanoparticles were with an average size of 20–25 nm and mostly spherical. The antibacterial potential of synthesized AgNPs was compared with that of aqueous OLE by well diffusion method. The AgNPs at 0.03–0.07 mg/ml concentration significantly inhibited bacterial growth against multi drug resistant Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli). This study revealed that the aqueous olive leaf extract has no effect at the concentrations used for preparation of the Ag nanoparticles. Thus AgNPs showed broad spectrum antibacterial activity at lower concentration and may be a good alternative therapeutic approach in future.     

A comparative study of the antibacterial mechanisms of silver ion and silver nanoparticles by Fourier transform infrared spectroscopy

In this study, we performed the first comparative study of the antibacterial mechanisms of silver ion (Ag⁺) and silver nanoparticles (AgNPs) on Escherichia coli (E. coli) using Fourier transform infrared (FTIR) spectroscopy. Through a thorough analysis of the FTIR spectra of E. coli after silver treatment in the spectral regions corresponding to thiol group, protein, lipopolysaccharide (LPS), and DNA, we were able to reveal a multifaceted antibacterial mechanism of silver at the molecular level for both Ag⁺ and AgNPs. Features of such mechanism include: (1) silver complexes with thiol group; (2) silver induces protein misfolding; (3) silver causes loss of LPS from bacterial membrane; (4) silver changes the overall conformation of DNA. Despite the similarities between Ag⁺ and AgNPs with respect to their antibacterial mechanisms, we further revealed that Ag⁺ and AgNPs display quite different kinetics for silver-thiol complexation and loss of LPS, with Ag⁺ displaying fast kinetics and AgNPs displaying slow kinetics. At last, we proposed a hypothesis to interpret the observed different behaviors between Ag⁺ and AgNPs when interacting with E. coli.     

Preparation of silver nanoparticles in liquid crystalline systems

Silver nanoparticles preparation and the aggregation stability of the particles was investigated in lamellar liquid crystalline systems. A liquid crystal of HDTABr/pentanol/water was first prepared. The water content was next increased while keeping the mass ratio of HDTABr and pentanol constant. Silver nanoparticles were produced by replacing the aqueous phase by Ag sols of various concentrations (0.5–5×10^–3 mol/l) or by an in situ preparation method, i.e., interlamellar reduction of Ag⁺ ions in the liquid crystalline phase. The stability of the silver nanoparticles was monitored by UV-VIS spectroscopy and TEM. The particle size ranged from 5 to 44 nm. The kinetic of silver nanoparticle aggregation was investigated. The effect of nanoparticles on structural ordering in liquid crystals was studied by XRD measurements and it was established that the lamellar distance (d_L) was only slightly altered. Electronic Publication     

Preparation and characterization of silver nanoparticles by chemical reduction method

Silver nanoparticles were prepared by the reduction of AgNO(3) with aniline in dilute aqueous solutions containing cetyltrimethlyammonium bromide, CTAB. Nanoparticles growth was assessed by UV-vis spectroscopy and the average particle size and the size distribution were determined from transmission electron microscopy, TEM. As the reaction proceeds, a typical plasmon absorption band at 390-450nm appears for the silver nanoparticles and the intensities increase with the time. Effects of [aniline], [CTAB] and [Ag(+)] on the particle formation rate were analyzed. The apparent rate constants for the formation of silver nanoparticles first increased until it reached a maximum then decreased with [aniline]. TEM photographs indicate that the silver sol consist of well dispersed agglomerates of spherical shape nanoparticles with particle size range from 10 to 30nm. Aniline concentrations have no significant effect on the shape, size and the size distribution of Ag-nanoparticles. Aniline acts as a reducing as well as adsorbing agent in the preparation of roughly spherical, agglomerated and face-centered-cubic silver nanoparticles.     

Green synthesis and characterization of silver nanoparticles using Juniperus communis leaf extract: Catalytic activity in real-outdoor conditions and electrochemical properties

The present study investigates the green synthesis of stable silver nanoparticles using Juniperus communis leaf aqueous extract at room temperature. Synthesized silver nanoparticles (AgNPs) were characterized with different techniques such as UV–vis spectroscopy, Fourier transforms infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM-EDAX) and electrochemical method. Photocatalytic and anti-bacterial activities of synthesized AgNPs are evaluated based on the obtained result showed an efficient inhibition growth for gram negative P. Aeruginosa, E. Coli, and gram positive bacteria S.aureus. The AgNPs exhibited an excellent photocatalytic activity toward the degradation of methylene blue both indoor and outdoor, under sunlight, an efficiency of 95% was achieved. As an easy and environmentally friendly process, AgNPs based on Juniperus communis leaf extract could be applied for the degradation of pollutants and wastewater treatment.     

Studies on surface plasmon resonance and photoluminescence of silver nanoparticles

Silver nanoparticles of different sizes were prepared by citrate reduction and characterized by UV-vis absorbance spectra, TEM images and photoluminescence spectra. The morphology of the colloids obtained consists of a mixture of nanorods and spheres. The surface plasmon resonance (SPR) and photoemission properties of Ag nanoparticles are found to be sensitive to citrate concentration. A blue shift in SPR and an enhancement in photoluminescence intensity are observed with increase in citrate concentration. Effect of addition of KCl and variation of pH in photoluminescence was also studied.     

Phytogenic-mediated silver nanoparticles using Persicaria hydropiper extracts and its catalytic activity against multidrug resistant bacteria

Multidrug resistance (MDR) is one of the major global threats of this century. So new innovative approaches are needed for the development of existing antibiotics to limit antibacterial resistance. The current study was aimed to utilize extracts of root, stem, and leaves of Persicaria hydropiper for the synthesis of silver nanoparticles (AgNPs) using standard procedure. Synthesis of AgNPs was evident from the change in color of the solution to dark brownish and then it was further revealed by UV–Vis and Fourier Transformed Infrared Spectroscopy (FTIR). UV–Vis spectroscopy has revealed absorbance peak at 370 nm while, FTIR spectrum displayed that aromatics amines were used as reducing agent in the fabrication of AgNPs. In addition, Scanning Electron Microscopy (SEM micrograph) displaying tetrahedron, spherical and oval shapes of synthesized AgNPs whereas, average size of synthesized AgNPs was found in the range of 32–77 nm. Beside this, it was also observed that the potency of antibiotics against MDR bacteria increased after coating with synthesized AgNPs i.e., the potency of Ceftazidime and Ciprofloxacin increased up to 450% and 500% against Bacillus respectively while, the potency of Gentamicin, Vancomycin and Linezolid increased up to 150%, 200% and 58% against Bacillus, Staphylococcus, and Proteus species respectively. Furthermore, it was concluded that utilizing AgNPs in combination with commercially available antibiotics would provide an alternate therapy for the treatment of infectious diseases caused by MDR bacteria.     

Biogenic synthesis of iron oxide nanoparticles for 2-arylbenzimidazole fabrication

A simple, efficient, and ecofriendly method has been developed for the exclusive synthesis of iron oxide nanoparticles using an aqueous extract of Passiflora tripartita var. mollissima fruit. Transmission electron microscopy (TEM) and Dynamic Light Scattering (DLS) analysis show that the average particle size of spherical iron oxide nanoparticles is 22.3 ± 3 nm. The synthesized nanocatalyst is highly active for the synthesis of biologically significant 2-arylbenzimidazoles. The reaction was carried out under mild condition with excellent yields. The catalyst is easily separated by magnet and recyclable without significant loss of activity.     

Preparation and properties of cellulose/silver nanoparticle composites with in situ-generated silver nanoparticles using Ocimum sanctum leaf extract

In the present work, silver nanoparticles were in situ-generated in cellulose matrix using Ocimum sanctum leaf extract as a reducing agent. Regenerated wet cellulose films were first immersed in O. sanctum leaf extract and then it was allowed to diffuse into the films. The leaf extract–diffused wet films were dipped in different concentrated aq.AgNO₃ solutions. The leaf extract inside the wet films reduced AgNO₃ into nanosilver. The dry composite films were black in color. Some of the nanoparticles were also formed outside the film in the solution. The nanoparticles were viewed by transmission electron microscopy and scanning electronic microscopy techniques. The composite films showed good antibacterial activity. The cellulose, matrix, and the composite films were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis techniques. The tensile properties of the composite films were higher than those of the matrix. These biodegradable films can be used for packaging and medical purposes.     

Biogenic fabrication of silver nanoparticles,oxidative dissolution and antimicrobial activities

Metallic silver nanoparticles (AgNPs) were prepared by using Foeniculum vulgare Mill seeds extract. The silver nitrate was used as silver precursor in an aqueous solution. The photooxidative dissolution of AgNPs with persulfate (K₂S₂O₈) under UV light was investigated. Effects of initial concentration of K₂S₂O₈, AgNPs, initial solution pH, and temperature were studied on dissolution of AgNPs. The 100% AgNPs dissolution was achieved in 60 min under typical conditions (pH = 4.0, 1.2 mM K₂S₂O₈, and 30 ⁰C). The experimental results showed higher temperature brought faster dissolution rate, and the activation energy was 65.2 kJ/mol. The effects of ethanol, tertiary butanol, and nitrobenzene were studied to establish the role of SO₄^? and HO radical species. AgNPs dissolution was inhibited by Cl^?, Br^?, I^?, and NO₃^? ions. Staphylococcus auerus (s. aureus), Escherichia coli (E. coli) and Candida albicans (C. albicans) were the effective human pathogens against the AgNPs. The lag phase, growth kinetics, minimum bactericidal concentration, death rate, and antimicrobial efficacy depend on the concentration of AgNPs.     

A novel one step synthesis of silver nanoparticles using room temperature ionic liquid and their biocidal activity

This article reports the synthesis of silver Nan particles (SNPs) using 1-(dodecyl) 2 amino-pyridinium bromide ionic liquid. This is a new one phase method for the synthesis of uniform monodispersed crystalline silver nanoparticles in a water-ionic liquid system. In this work, the functionalized room temperature IL acts as stabilizing agent and solvent. Hydrazine hydrate acts as reducing agent. To the best of our knowledge, there is no report of the synthesis of metal nanoparticles using this ionic liquid. The synthesis of silver nanoparticles is very primarily studied by UV-Visible spectroscopic analysis. The TEM and particle size distribution was used to study morphology and size of the particles. The charge on synthesized SNPs was determined by Zeta potential. The silver nanoparticles have been known to have inhibitory and bactericidal effect. The investigation of antibacterial activities of ionic liquid stabilized silver nanoparticles was performed by measurement of the minimum inhibitory concentration.     

Detail review on chemical,physical and green synthesis,classification, characterizations and applications of nanoparticles

ABSTRACT

Nanotechnology is an emerging field of science. The base of nanotechnology is nanoparticles. The size of nanoparticles ranges from 1 to 100?nm. The nanoparticles are classified into different classes such as inorganic nanoparticles, organic nanoparticles, ceramic nanoparticles and carbon base nanoparticles. The inorganic nanoparticles are further classified into metal nanoparticles and metal oxide nanoparticles.similarly carbon base nanoparticles classified into Fullerene, Carbon nanotubes, Graphene, Carbon nanofiber and carbon black Nanoparticles are also classified on the basis of dimension such as one dimension nanoparticles, two-dimension nanoparticles and three-dimension nanoparticles. The nanoparticles are synthesized by using two approaches like top-down approach and bottom-up approach. In this review chemical, physical and green synthesis of nanoparticles is reported. The synthesized nanoparticles are synthesized using different qualitative and quantitative techniques. The Qualitative techniques include Fourier Transform Infrared Spectroscopy (FT-IR), UV-Vis spectrophotometry, Scanning electron microscope (SEM), X.ray diffraction (XRD) and Atomic Force Microscopy (AFM). The Quantitative techniques include Transmission Electron Microscopy (TEM), Annular Dark-Field Imaging (HAADF) and Intracranial pressure (ICP). The nanoparticles have different application which is reported in this review.     

Biosynthesis, purification and characterization of silver nanoparticles using Escherichia coli

The application of nanoscale materials and structures, usually ranging from 1 to 100 nanometers (nm), is an emerging area of nanoscience and nanotechnology. Nanomaterials may provide solutions to technological and environmental challenges in the areas of solar energy conversion, catalysis, medicine, and water-treatment. The development of techniques for the controlled synthesis of nanoparticles of well-defined size, shape and composition, to be used in the biomedical field and areas such as optics and electronics, has become a big challenge. Development of reliable and eco-friendly processes for synthesis of metallic nanoparticles is an important step in the field of application of nanotechnology. One of the options to achieve this objective is to use ‘natural factories’ such as biological systems. This study reports the optimal conditions for maximum synthesis of silver nanoparticles (AgNPs) through reduction of Ag⁺ ions by the culture supernatant of Escherichia coli. The synthesized silver nanoparticles were purified by using sucrose density gradient centrifugation. The purified sample was further characterized by UV–vis spectra, fluorescence spectroscopy and TEM. The purified solution yielded the maximum absorbance peak at 420 nm and the TEM characterization showed a uniform distribution of nanoparticles, with an average size of 50 nm. X-ray diffraction (XRD) spectrum of the silver nanoparticles exhibited 2θ values corresponding to the silver nanocrystal. The size-distribution of nanoparticles was determined using a particle-size analyzer and the average particle size was found to be 50 nm. This study also demonstrates that particle size could be controlled by varying the parameters such as temperature, pH and concentration of AgNO₃.     

Green synthesis and characterization of polymer-stabilized silver nanoparticles

Silver nanoparticles (Ag-NPs) were synthesized using a facile green chemistry synthetic route. The reaction occurred at ambient temperature with four reducing agents introduced to obtain nanoscale Ag-NPs. The variables of the green synthetic route, such as acidity, concentration of starting materials, and molar ratio of reactants were optimized. Dispersing agents were employed to prevent Ag-NPs from aggregating. Advanced instrumentation techniques, such as X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible spectroscopy (UV–vis), and phase analysis light scattering technique (ZetaPALS) were applied to characterize the morphology, particle size distribution, elemental composition, and electrokinetic behavior of the Ag-NPs. UV–vis spectra detected the characteristic plasmon at approximately 395–410 nm; and XRD results were indicative of face-centered cubic phase structure of Ag. These particles were found to be monodispersed and highly crystalline, displaying near-spherical appearance, with average particle size of 10.2 nm using citrate or 13.7 nm using ascorbic acid as reductants from particle size analysis by ZetaPALS, respectively. The rapid electrokinetic behavior of the Ag was evaluated using zetapotential (from −40 to −42 mV), which was highly dependant on nanoparticle acidity and particle size. The current research opens a new avenue for the green fabrication of nanomaterials (including variables optimization and aggregation prevention), and functionalization in the field of nanocatalysis, disinfection, and electronics.     

Synthesis and characterization of stable organosols of silver nanoparticles by electrochemical dissolution of silver in DMSO

Stable organosols of silver nanoparticles (AgNPs) without any capping agents have been synthesized by an electrochemical dissolution of a sacrificing silver electrode in dimethyl sulfoxide (DMSO). The peak at 425 +/- 5 nm observed in the UV-vis spectra was attributed to the surface plasmon resonance for silver. The formation of nanoparticles of silver was confirmed by X-ray diffraction analysis (XRD). In TEM, three ranges of particle size were observed, namely, 3.75 +/- 0.8, 6.25 +/- 0.5, and 9.25 +/- 0.3 nm. The correlation among these sizes was explained by a new model based on a droplet coalition. Based on that, sizes correlation fits very well in the empirical formula 5d(1)(3)n' + (3 - n')d(2)(3) = d(3)(3) where d(1), d(2), and d(3) are three sizes of particles and n' is an integer having values 0, 1, 2, 3, .... The sols prepared in DMSO were stable against flocculation for months. An unusual solution stability without any capping agents was attributed to the formation of Ag(I)DMSO complex on particle surface, which was confirmed by FTIR, fluorescence spectroscopy, and thermal analysis.     

Formulation and characterization of a novel cutaneous wound healing ointment by silver nanoparticles containing Citrus lemon leaf: A chemobiological study

IntroductionFormulating new wound-healing ointments by natural compounds is the first research priority in the developing and developed countries. This study was intended to provide green formulation of Ag-NP ointment containing Citrus lemon leaf aqueous extract and examine its capability of healing cutaneous wounds and its antioxidant and cytotoxicity activities under in vitro and in vivo conditions.Materials and methodsDifferent techniques, including UV–Vis and FT-IR spectroscopy, were used to characterize Ag-NPs. MTT assay was used to investigate cytotoxicity property of Ag-NPs. Antioxidant activity of Ag-NPs were examined by DPPH in the presence of butylated hydroxytoluene as positive control. Parameters of cutaneous wound healing were measured both histopathologically and biochemically.ResultsClear peak at 429 nm shown by UV–Vis spectroscopy indicated formation of Ag-NPs. In FT-IR spectroscopy, presence of many antioxidant compounds provided an excellent condition to reduce silver in Ag-NPs. FE-SEM and TEM images showed spherical Ag-NPs with an average size of 25.1 nm. The synthesized silver nanoparticles had excellent cell viability on the HUVECs line and indicated this method was nontoxic. Application of Ag-NP ointment improved wound healing parameters significantly (P ≤ 0.01). Ag-NPs reduced wound areas, total cells, neutrophils and lymphocytes significantly (P ≤ 0.01) and increased wound contracture, vessels, hexosamines, hydroxyl proline, hexuronic acid, fibrocytes, fibroblasts and fibrocyte/ fibroblast ratios significantly (P ≤ 0.01).ConclusionsOnce our results are verified by clinically experimental studies, Ag-NP ointment can be used as a modern one to treat several types of wounds, especially cutaneous ones, in humans.     

Nanocomposite polyester fabrics with in situ generated silver nanoparticles using tamarind leaf extract reducing agent

Using tamarind leaf extract as a reducing agent and various concentrated aq?AgNO₃ solutions as source, the silver nanoparticles (AgNPs) were in situ generated in polyester fabrics. The nanocomposite polyester fabrics were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and antibacterial tests. The size of the generated AgNPs varied between 50 and 120?nm. The X-ray analysis indicated the generation of both AgNPs and AgO nanoparticles in the nanocomposite fabrics. The nanocomposite polyester fabrics exhibited excellent antibacterial activity against both the Gram negative and Gram positive bacteria and hence can be considered for making antibacterial textiles.