Evaluation of Acacia nilotica as a non conventional low cost biosorbent for the elimination of Pb(II) and Cd(II) ions from aqueous solutions

In the present study a biomass derived from the leaves of Acacia nilotica was used as an adsorbent material for the removal of cadmium and lead from aqueous solution. The effect of various operating variables, viz., adsorbent dosage, contact time, pH and temperature on the removal of cadmium and lead has been studied. Maximum adsorption of cadmium and lead arises at a concentration of 2 g/50 ml and 3 g/50 ml and at a pH value of 5 and 4, respectively. The sorption data favored the pseudo-second-order kinetic model. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were applied to describe the biosorption isotherm of the metal ions by A. nilotica biomass. Based on regression coefficient, the equilibrium data found were fitted well to the Langmuir equilibrium model than other models. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) have been calculated, respectively revealed the spontaneous, endothermic and feasible nature of adsorption process. The activation energy of the biosorption (Ea) was estimated as 9.34 kJ mol⁻¹ for Pb and 3.47 kJ mol⁻¹ for Cd from Arrhenius plot at different temperatures.     

Thermodynamic and isotherm studies of the biosorption of Cu(II), Pb(II), and Zn(II) by leaves of saltbush (Atriplex canescens)

The Freundlich and Langmuir isotherms were used to describe the biosorption of Cu(II), Pb(II), and Zn(II) onto the saltbush leaves biomass at 297 K and pH 5.0. The correlation coefficients (R²) obtained from the Freundlich model were 0.9798, 0.9575, and 0.9963 for Cu, Pb, and Zn, respectively, while for the Langmuir model the R² values for the same metals were 0.0001, 0.1380, and 0.0088, respectively. This suggests that saltbush leaves biomass sorbed the three metals following the Freundlich model (R² > 0.9575). The K_F values obtained from the Freundlich model (175.5 · 10⁻², 10.5 · 10⁻², and 6.32 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively), suggest that the metal binding affinity was in the order Pb > Zn > Cu. The experimental values of the maximal adsorption capacities of saltbush leaves biomass were 0.13 · 10⁻², 0.05 · 10⁻², and 0.107 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively. The negative ΔG^∘ values for Pb and the positive values for Cu and Zn indicate that the Pb biosorption by saltbush biomass was a spontaneous process.     

The removal of uranium (VI) from aqueous solutions onto natural sepiolite

The adsorption of uranium (VI) from aqueous solutions onto natural sepiolite has been studied using a batch adsorber. The parameters that affect the uranium (VI) sorption, such as contact time, solution pH, initial uranium(VI) concentration, and temperature, have been investigated and optimized conditions determined. Equilibrium isotherm studies were used to evaluate the maximum sorption capacity of sepiolite and experimental results showed this to be 34.61 mg · g^?1. The experimental results were correlated reasonably well by the Langmuir adsorption isotherm and the isotherm parameters (Q_o and b) were calculated. Thermodynamic parameters (ΔH° = ?126.64 kJ · mol^?1, ΔS° = ?353.84 J · mol^?1 · K^?1, ΔG° = ?21.14 kJ · mol^?1) showed the exothermic heat of adsorption and the feasibility of the process. The results suggested that sepiolite was suitable as sorbent material for recovery and adsorption of uranium (VI) ions from aqueous solutions.     

Thermodynamics and kinetics of adsorption of Cu(II) from aqueous solutions onto a new cation exchanger derived from tamarind fruit shell

A novel cation exchanger (TFS-CE) having carboxylate functionality was prepared through graft copolymerization of hydroxyethylmethacrylate onto tamarind fruit shell (TFS) in the presence of N,N′-methylenebisacrylamide as a cross-linking agent using K₂S₂O₈/Na₂S₂O₃ initiator system, followed by functionalisation. The TFS-CE was used for the removal of Cu(II) from aqueous solutions. At fixed solid/solution ratio the various factors affecting adsorption such as pH, initial concentration, contact time, and temperature were investigated. Kinetic experiments showed that the amount of Cu(II) adsorbed increased with increase in Cu(II) concentration and equilibrium was attained at 1 h. The kinetics of adsorption follows pseudo-second-order model and the rate constant increases with increase in temperature indicating endothermic nature of adsorption. The Arrhenius and Eyring equations were used to obtain the kinetic parameters such as activation energy (E_a) and enthalpy (ΔH^#), entropy (ΔS^#) and free energy (ΔG^#) of activation for the adsorption process. The value of E_a for adsorption was found to be 10.84 kJ · mol^?1 and the adsorption involves diffusion controlled process. The equilibrium data were well fitted to the Langmuir isotherm. The maximum adsorption capacity for Cu(II) was 64 · 10 mg · g^?1 at T = 303 K. The thermodynamic parameters such as changes in free energy (ΔG^°), enthalpy (ΔH^°), and entropy (ΔS^°) were derived to predict the nature of adsorption process. The isosteric heat of adsorption increases with increase in surface loading indicating some lateral interactions between the adsorbed metal ions.     

Indoor corrosion of Pb: Effect of formaldehyde concentration and relative humidity investigated by Raman microscopy

In this work the effect of relative humidity (RH) and formaldehyde (H₂CO) concentration on Pb corrosion was investigated; a possible synergism between the aldehyde and CO₂ effects was also considered. Triphasic aqueous salt solutions were used to produce 54% and 75% RH that, together with the 100% RH condition, were combined with 0, 0.62, 55 and 2.0 10² mg m⁻³ formaldehyde concentrations to compose the wanted environments.The results pointed to the conclusion that even at low RH (54%) formates are produced at the metal surface as a consequence of formaldehyde adsorption, indicating that the aldehyde has an active role in Pb corrosion; formates were also observed at relatively low H₂CO concentration (0.62 mg m⁻³). No synergism between formaldehyde and carbon dioxide were observed as demonstrated by the Raman images from a corroded Pb coupon, showing that formate and carbonate contributions to the corrosion products were not spatially related.When compared to other volatile organic compounds (VOCs), formaldehyde harmful effect towards metals is frequently underestimated and the results here reported clearly indicate that, even at low RH, its concentration in indoor environments, where it tends to be produced and accumulated, has to be carefully controlled.     

Thermodynamics of the Cu(II) adsorption on thin vanillin-modified chitosan membranes

In this work, low-density vanillin-modified thin chitosan membranes were synthesized and characterized. The membranes were utilized as adsorbent for the removal of Cu(II) from aqueous solutions. The experimental data obtained in batch experiments at different temperatures were fitted to the Langmuir and Freundlich isotherms to obtain the characteristic parameters of each model. The adsorption equilibrium data fitted well with the Langmuir model (average R² > 0.99). Interactions thermodynamic parameters (Δ_intH, Δ_intG, and Δ_intS), as well as the interaction thermal effects (Q_int) were determined from T = (298 to 333) K. The thermodynamic parameters, the Dubinin–Radushkevick equation and the comparative values of Δ_intH for some Cu(II)–adsorbent interactions suggested that the adsorption of Cu(II) ions to vanillin-chitosan membranes show average results for both the diffusional (endothermic) and chemical bonding (exothermic) processes in relation to the temperature range studied.     

Thermodynamic analysis of sorption isotherms of chromium(VI) anionic species on reed biomass

A new sorbent material for removing Cr(VI) anionic species from aqueous solutions has been investigated. Adsorption equilibrium and thermodynamics of Cr(VI) anionic species onto reed biomass were studied at different initial concentrations, sorbent concentrations, pH levels, temperatures, and ionic strength. Equilibrium isotherm was analyzed by Langmuir model. The experimental sorption data fit the model very well. The maximum sorption capacity of Cr(VI) onto reed biomass was found to be 33 mg · g^?1. It was noted that the Cr(VI) adsorption by reed biomass decreased with increase in pH. An increase in temperature resulted in a higher Cr(VI) loading per unit weight of the adsorbent. Removal of Cr(VI) by reed biomass seems to be mainly by chemisorption. The change in entropy (ΔS^°) and heat of adsorption (ΔH^°) for Cr(VI) adsorption on reed biomass were estimated as 2205 kJ · kg^?1 · K^?1 and 822 kJ · kg^?1, respectively. The values of isosteric heat of adsorption varied with the surface loading of Cr(VI).     

Electrochemical investigation of corrosion and corrosion inhibition of iron in hydrochloric acid solutions

The inhibition effect of 1-methyl pyrazole (MPA) on the acidic corrosion of iron in 1.0 M HCl was studied at different concentrations (10^?3–10^?2 M) by potentiodynamic polarization and electrochemical impedance spectroscopy, and EIS measurements. It is found from the polarization studies that methyl pyrazole (MPA) behaves mainly as anodic inhibitor in HCl. Values of polarization resistance (R_p) and double layer capacitance (C_dl) in the absence and presence of MPA in 1.0 M HCl are determined. The adsorption of MPA on iron surface from HCl is found to obey Temkin adsorption isotherm.     

Kinetics,isotherm and thermodynamics for Cr(III) and Cr(VI) adsorption from aqueous solutions by crystalline hydrous titanium oxide

The synthetic crystalline hydrous titanium(IV) oxide (CHTO), an anatase variety and thermally stable up to 300 °C, has been used for adsorption of Cr(III) and Cr(VI) from the aqueous solutions, the optimum pH-values of which are 5.0 and 1.5, respectively. The kinetic data correspond very well to the pseudo-second order equation. The rates of adsorption are controlled by the film (boundary layer) diffusion, and increase with increasing temperature. The equilibrium data describe very well the Langmuir, Redlich–Peterson, and Toth isotherms. The monolayer adsorption capacities are high, and increased with increasing temperature. The evaluated ΔG^° (kJ · mol^?1) and ΔH^° (kJ · mol^?1) indicate the spontaneous and endothermic nature of the reactions. The adsorptions occur with increase in entropy (ΔS^° = positive), and the mean free energy (E_DR) values obtained by analysis of equilibrium data with Dubinin–Radushkevick equation indicate the ion-exchange mechanism for Cr(III) and Cr(VI)-adsorptions.     

Use of aminoprophyl silica-immobilized humic acid for Cu(II) ions removal from aqueous solution by using a continuously monitored solid phase extraction technique in a column arrangement

Humic acid (HA) which originated from Leonardite was purified and immobilized onto aminoprophyl silica (APS). Afterwards, the remaining amino groups on the silica are successfully end-capped using acetic anhydride in DMF media and this material was used for Cu(II) ions removal from aqueous solution by using continuously solid phase extraction (SPE) technique in a column arrangement. The sorption characteristics of Cu(II)-immobilized humic acid (ImHA) system were investigated at various experimental conditions, and output was observed by a UV detector. All solid phase extraction (SPE) steps were monitored through breakthrough curves used to visualize distribution of Cu(II) concentration between mobile phase and solid phase. In addition to this, the solutions collected from stripping steps were analyzed in atomic absorption spectrophotometry (AAS) and the amount of adsorbed Cu(II) ions was calculated. It was found that there was a high correlation (R² = 1) between the peak area and AAS data of stripping steps. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin–Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Thus, the sorption characteristics and usability of ImHA as a solid phase for SPE of Cu(II) ions was evaluated in detail. From the obtained results, it was seen that sorption mechanism of Cu(II) fits to Langmuir model on a large scale, sorption was thought to be localized. From D-R isotherm mean free energy of sorption (E) was calculated (17.68 kJ mol⁻¹), and it was deduced that chemical interactions were more effective than physical interactions for Cu(II). This investigation provides a new, environmentally friendly and cost-effective possibility to remove Cu(II) ions from aqueous solution by using the new APS-ImHA material.     

Modelling of phenol removal in aqueous solution depending on the electron beam energy

This paper deals with the influence of the electron beam energy (E=1.2–3 MeV; I=20–125 μA; D_R=1.3–8.3 kGy s⁻¹) on the degradation of phenol in aqueous solution. The decomposition of phenol and the concentration of its principal by-products are significantly influenced by the energy of the electron beam. The degradation yield increases with the electron energy. A simplified phenomenologic model of the reactor was proposed to describe the results.     

Preparation of core-shell magnetic Fe3O4@SiO2-dithiocarbamate nanoparticle and its application for the Ni2+, Cu2+ removal

A typical superparamagnetic nanoparticles-based dithiocarbamate absorbent (Fe₃O₄@SiO₂-DTC) with core-shell structure was applied for aqueous solution heavy metal ions Ni²⁺, Cu²⁺ removal.     

Al-centered functionalized inorganic–organic hybrid sorbent containing N and S donor atoms for effective removal of cadmium

A new aluminium-incorporated layered inorganic–organic hybrid material (Al-GPTS-TU) has been successfully synthesized by using sol–gel based precursor under mild temperature condition and silylaing agent (GPTS-TU) derived from the reaction of 3-glycidoxypropyltrimethoxysilane (GPTS) and thiourea (TU). The hybrid material was characterized by using various instrumentation techniques and the result confirmed the attachment of organic functionality to the inorganic silicon network. The inter-lamellar distance for the hybrid material was found to be 41.33 Å. The synthesized hybrid was used for the removal of cadmium from dilute aqueous solution with variation of solution parameters. Thermodynamic parameters ΔH and ΔS, evaluated for the adsorption of cadmium from water solution, were found to be 73.68 kJ mol^?1 and 282.9 J mol^?1 K^?1, respectively, indicating adsorption process to be endothermic in nature. The negative value of ΔG indicated the feasibility and spontaneity of ongoing adsorption process. The hybrid material containing multiple coordination sites such as S and N in the attached organic functionality can find potential applications for the removal of various metal toxicants from water bodies to prevent the eco-system.     

Adsorption of strontium from aqueous solution using activated carbon produced from textile sewage sludges

Different types of activated carbons were prepared by changing the activation temperatures (400–700 °C) and impregnation ratio (sewage sludge: KOH; 1:1, 1:2) and the removal of Sr⁺² from aqueous solution was determined. The maximum adsorption yield (12.11 mg/g) was obtained at 500 °C for 1 h carbonization conditions with impregnation ratio of 1:1. The affecting parameters were analyzed by using central composite design method. The selected parameters were initial pH, temperature, initial strontium concentration and carbon dosage. The analysis of variance was performed in 95% confidence level and checked to fitting of experimental value and predicted value. The significant F was P < 0.05 with a model F value of 19.94 which revealed that this regression is statistically significant. The results of regression analysis indicated that pH and temperature parameters were not individually statistically significant for Sr⁺²sorption. However, the efficiency of strontium sorption increases with the increase in carbon dosage and decreases with the Sr⁺² concentration. Influences of initial pH and temperature, pH and Sr⁺² concentration, temperature and carbon dosage and Sr⁺² concentration and carbon dosage on the adsorption process were considered statistically significant. Adsorption of strontium was described by Freundlich isotherm as a physical adsorption (E = 7.2 kJ/mol). The adsorption reactions were calculated as endothermic, spontaneous and favorable reactions.     

Characterization and quantification of secondary metabolite profiles in leaves of red and white clover species by NIR and ATR-IR spectroscopy

Different varieties of two clover species (Trifolium pratense L. and Trifolium repens L.), cultivated in 2008 and 2009 were analysed by near-infrared (NIR) and mid-infrared (MIR) spectroscopy for establishing a fast and reliable quantification protocol for isoflavones and phenolic acids. Based on HPLC–UV/MS reference data, good results were obtained by PLS regression for the prediction of total isoflavone (R² = 0.90) as well as for glycitin content (R² = 0.88). Because of the lower concentration of formononetin and phenolic acids, their prediction quality was generally slightly lower (R² = 0.73 and R² = 0.64, respectively) compared to those of the isoflavones. The applicability of ‘leave one out’ cross validation for such a large data set is proven by comparison to an averaged randomized test-set validation leading to similar results. Additionally, the large sample set (n = 624) was screened by hierarchical cluster analysis allowing a fast evaluation of influences resulting from different cultivation parameters on the isoflavone and phenolic acid content. Climatic changes (cultivation year, date of harvest) seem to have the most impact on the metabolic profile as indicated by higher variability in the referring spectra when both cultivation years were simultaneously regarded. This work offers a new vibrational spectroscopic approach for the qualitative and quantitative determination of isoflavone and phenolic acid profiles, directly performed in the plant material without any laborious sample preparation and time-consuming chromatography. Once validated by HPLC reference, MIR and NIR spectroscopy can be used for the reliable prediction of secondary metabolites in clover as well as for fast screening and pre-evaluation of the diversity of a large sample set, aiming to reduce analytical costs, chemical waste and expenditure of time.     

Effect of electrolytes on surface tension and surface adsorption of 1-hexyl-3-methylimidazolium chloride ionic liquid in aqueous solution

Surface and bulk properties of 1-hexyl-3-methylimidazolium chloride [C₆mim][Cl] as an ionic liquid (IL) have been investigated by surface tension and electrical conductivity techniques at various temperatures. Results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solution. Critical aggregation concentration (cac) values obtained by conductivity and surface tension measurements are in good agreement with values found in the literature. A series of important and useful adsorption parameters including cac, surface excess concentration (Γ), and minimum surface area per molecule (A_min) at the air + water interface were estimated from surface tension in the presence and absence of different electrolytes. Obtained data show that the surface tension as well as the cac of [C₆mim][Cl] is reduced by electrolytes. Also, values of surface excess concentration (Γ) show that the IL ions in the presence of electrolyte have much larger affinity to adsorption at the surface and this affinity increased in aqueous electrolyte solution in the order of I^? > Br^? > Cl^? for counter ion of salts that was explained in terms of a larger repulsion of chloride anions from interface to the bromide and iodide anion as well as difference in their excess polarizability.     

Thermodynamics and kinetics of adsorption of Cu(II) from aqueous solutions onto multi-walled carbon nanotubes

Release of heavy metals into water as a result of industrial activities may pose a serious threat to the environment. The objective of this study is to assess the uptake of Cu²⁺ from aqueous solutions onto multi-walled carbon nanotubes (MWCNT). The potential of the t-MWCNT to remove Cu²⁺ cations from aqueous solutions was investigated in batch reactor under different experimental conditions. The processing parameters such as initial concentration of Cu²⁺ ions, temperature, and adsorbent mass were also investigated. Copper uptake was quantitatively evaluated using the Langmuir, Freundlich and Dubinin–Kaganer–Radushkevich (DKR) models. In addition, the adsorption equilibrium was described well by the Langmuir isotherm model with maximum adsorption capacity of 12.34 mg/g of Cu²⁺ cations on t-MWCNT. Various thermodynamic parameters, such as ΔG⁰, ΔH⁰ and ΔS⁰ were calculated. The thermodynamics of Cu²⁺ cations adsorption onto t-MWCNT system pointed at spontaneous and endothermic nature of the process. Using the second-order kinetic constants, the activation energy of adsorption (E_a) was determined as 27.187 kJ/mol according to the Arrhenius equation.     

Reversibility of platinum voltammograms in aqueous electrolytes,ionic product and dissociative adsorption of water

Well-known reversibility of platinum voltammograms in supporting aqueous electrolytes formally contradicts the equilibrium defined by the ionic product of water: K_w = [H⁺] · [OH⁻] ≅ 1 × 10¹⁴, since at any pH value, concentration of one of these ions should be too low (⩽10⁷ M) to ensure reversibility in the whole potential region at usual scan rates. This contradiction could be overcome by allowing dissociative water adsorption on platinum. All available relevant data obtained by in situ physical methods appear to provide indirect experimental evidences for this hypothesis.     

Synthesis and asymmetric catalytic application of chiral imidazolium–phosphines derived from (1R,2R)-trans-diaminocyclohexane

Reaction between a chiral imidazole–amine precursor derived from (1R,2R)-trans-diaminocyclohexane and P¹Cl (where P¹ = PPh₂, P(1,3,5-Me₃C₆H₃)₂, P(2,2′-O,O′-(1,1′-biphenyl), P((R)-(2,2′-O,O′-(1,1′-binaphthyl))) and P((S)-(2,2′-O,O′-(1,1′-binaphthyl)))) followed by RX (where R = ⁿPr, ⁱPr, CHPh₂, X = Br; R = ⁱPr, X = I), respectively, gives a selection of chiral imidazolium–phosphine compounds. Deprotonation of the imidazolium salt gives the corresponding NHC–P ligands that can be used in metal-mediated asymmetric catalytic applications. Catalytic reactions show that NHC–P ligands give a significantly greater rate of reaction for a palladium catalysed allylic substitution reaction in comparison to analogous di-NHC or NHC–imine ligands and that NHC–P hybrids are also effective for iridium catalysed transfer hydrogenation.     

Biosorption of Ni(II) from electroplating wastewater by modified (Eriobotrya japonica) loquat bark

Biosorption of nickel ions from aqueous solutions by modified loquat bark waste (MLB) has been investigated in a batch biosorption process. The biosorbent MLB was characterized by FTIR analysis. The extent of biosorption of Ni(II) ions was found to be dependent on solution pH, initial nickel ions concentration, biosorbent dose, contact time, and temperature. The experimental equilibrium biosorption data were analyzed by three widely used two-parameters Langmuir, Temkin and Freundlich isotherm models. Langmuir and Temkin isotherm models provided a better fit with the experimental data than Freundlich isotherm model by high correlation coefficients R². The maximum adsorption capacity was 27.548 mg/g of Ni(II) ions onto MLB. The thermodynamic analysis indicated that the biosorption behavior of nickel ions onto MLB biosorbent was an endothermic process, resulting in higher biosorption capacities at higher temperatures. The negative values of ΔG° (−5.84 kJ/mol) and positive values of ΔH° (13.33 kJ/mol) revealed that the biosorption process was spontaneous and endothermic. Kinetic studies showed that pseudo-second order described well the biosorption experimental data. The modified loquat bark (MLB) was successfully used for the biosorption of nickel ions from synthetic and industrial electroplating effluents.