Treatment of SMC Composite Waste for Recycling as Reinforcing Fillers in Thermoplastics

Needs for recycling thermoset composite materials are considerably increasing. Unfortunately, such materials are particularly difficult to recycle due to their crosslinked nature. In this paper, we focus on the case of Sheet Moulding Compounds (SMC), which consist of an unsaturated polyester filled with glass fibres and calcium carbonate. We consider the possibilities of mechanical treatments allowing to obtain ground fractions that could be used as fillers for the reinforcement of thermoplastics. Two processes are described and compared with an existing industrial one. Finally, optimised fractions of SMC waste are introduced into polypropylene, leading to promising results in term of mechanical properties.     

Overexpression and characterization of the Rhodobacter sphaeroides PufX membrane protein in Escherichia coli

Heterologous expression of the PufX membrane protein from purple photosynthetic bacterium Rhodobacter sphaeroides was attempted by using Escherichia (E.) coli cells. The PufX was overexpressed as a recombinant protein with a histidine tag added to the carboxyl terminus, and can be extracted from the cell membrane by various detergents. Circular dichroism measurements showed that the expressed PufX protein had alpha-helix contents of 29% in organic solvents and 22-26% in 0.8-2.0% (w/v) n-octyl beta-D-glucopyranoside solutions, suggesting that the PufX contains a substantial alpha-helical region composed of 18-22 amino acids. The PufX expressed in E. coli was examined by reconstitution experiments with LH1 alpha- and beta-polypeptides and bacteriochlorophyll a. It was shown that the PufX inhibited not only the reconstitution of the LH1 complex, but also the formation of the B820 subunit type complex at high concentrations, indicating that the expressed PufX is biologically active. Large-scale expression of the functional PufX membrane protein provides sufficient quantity for further biophysical and structural analyses of its biological function, and adds another example for producing highly hydrophobic integral membrane proteins using the E. coli expression system.     

In situ structural characterization of a recombinant protein in native Escherichia coli membranes with solid-state magic-angle-spinning NMR

The feasibility of using solid-state magic-angle-spinning NMR spectroscopy for in situ structural characterization of the LR11 (sorLA) transmembrane domain (TM) in native Escherichia coli membranes is presented. LR11 interacts with the human amyloid precursor protein (APP), a central player in the pathology of Alzheimer's disease. The background signals from E. coli lipids and membrane proteins had only minor effects on the LR11 TM resonances. Approximately 50% of the LR11 TM residues were assigned by using (13)C PARIS data. These assignments allowed comparisons of the secondary structure of the LR11 TM in native membrane environments and commonly used membrane mimics (e.g., micelles). In situ spectroscopy bypasses several obstacles in the preparation of membrane proteins for structural analysis and offers the opportunity to investigate how membrane heterogeneity, bilayer asymmetry, chemical gradients, and macromolecular crowding affect the protein structure.     

The genetic incorporation of a distance probe into proteins in Escherichia coli

The unnatural amino acid p-nitrophenylalanine (pNO2-Phe) was genetically introduced into proteins in Escherichia coli in response to the amber nonsense codon with high fidelity and efficiency by means of an evolved tRNA/aminoacyl-tRNA synthetase pair from Methanocuccus jannaschii. It was shown that pNO2-Phe efficiently quenches the intrinsic fluorescence of Trp in a distance-dependent manner in a model GCN4 basic region leucine zipper (bZIP) protein. Thus, the pNO2-Phe/Trp pair should be a useful biophysical probe of protein structure and function.     

Atomic differentiation of silver binding preference in protein targets: Escherichia coli malate dehydrogenase as a paradigm

Understanding how metallodrugs interact with their protein targets is of vital importance for uncovering their molecular mode of actions as well as overall pharmacological/toxicological profiles, which in turn facilitates the development of novel metallodrugs. Silver has been used as an antimicrobial agent since antiquity, yet there is limited knowledge about silver-binding proteins. Given the multiple dispersed cysteine residues and histidine–methionine pairs, Escherichia coli malate dehydrogenase (EcMDH) represents an excellent model to investigate silver coordination chemistry as well as its targeting sites in enzymes. We show by systematic biochemical characterizations that silver ions (Ag⁺) bind EcMDH at multiple sites including three cysteine-containing sites. By X-ray crystallography, we unravel the binding preference of Ag⁺ to multiple binding sites in EcMDH, i.e., Cys113 > Cys251 > Cys109 > Met227. Silver exhibits preferences to the donor atoms and residues in the order of S > N > O and Cys > Met > His > Lys > Val, respectively, in EcMDH. For the first time, we report the coordination of silver to a lysine in proteins. Besides, we also observed argentophilic interactions (Ag⋯Ag, 2.7 to 3.3 Å) between two silver ions coordinating to one thiolate. Combined with site-directed mutagenesis and an enzymatic activity test, we unveil that the binding of Ag⁺ to the site IV (His177-Ag-Met227 site) plays a vital role in Ag⁺-mediated MDH inactivation. This work stands as the first unusual and explicit study of silver binding preference to multiple binding sites in its authentic protein target at the atomic resolution. These findings enrich our knowledge on the biocoordination chemistry of silver(i), which in turn facilitates the prediction of the unknown silver-binding proteins and extends the pharmaceutical potentials of metal-based drugs.

Silver-binding preference in its authentic protein targets with MDH as a paradigm was uncovered.     

Expression of a model peptide of a marine mussel adhesive protein in Escherichia coli and characterization of its structural and functional properties

An expression system for a chemically synthesized gene, encoding a model peptide of marine mussel adhesive protein, was constructed in Escherichia coli under regulation of the T7‐promoter. The model peptide consisted of six repeats of the decapeptide AKPSYPPTYK. Although the product was expressed as an inclusion body, we were able to solubilize it successfully, using acetic acid. The higher‐order structure of this model peptide was investigated using CD spectroscopy and NMR spectroscopy. Using the modified enzyme, mushroom tyrosinase, the tyrosine residue was hydroxylated to 3,4‐dihydoxyphenylalanine (Dopa), and the resulting modified peptide was polymerized, solidified, and insolubilized spontaneously. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 729–736, 1999     

Purification and initial characterization of a putative blue light-regulated phosphodiesterase from Escherichia coli

The Escherichia coli protein YcgF contains a photosensory flavin adenine dinucleotide (FAD)-binding BLUF domain covalently linked to an EAL domain, which is predicted to have cyclic-di-guanosine monophosphate (GMP) phosphodiesterase activity. We have cloned, overexpressed and purified this protein, which we refer to as blue light-regulated phosphodiesterase (Blrp) for its putative activity. Blrp undergoes a reversible photocycle after exposure to light in which the spectrum of its photostationary state and kinetics of recovery of the dark state are similar to those of the isolated BLUF domain of the AppA protein. Unlike the AppA BLUF domain, the chromophore environment in the context of full-length Blrp is asymmetric, and the protein does not undergo any detectable global changes on exposure to blue light. When overexpressed in E. coli, Blrp copurifies with certain proteins which suggests that it plays a protective role in response to oxidative stress. Predicted proteins from Klebsiella pneumoniae and from a bacterium in the Sargasso Sea are similar to E. coli Blrp in both their BLUF and EAL domains, which suggests that blue light sensing in these bacteria may follow similar pathways.     

Synthesis of a proposed antigenic hexapeptide from Escherichia coli K88 protein fimbriae

The hexapeptide Boc-Asp-Asp-Tyr-Arg-Gln-Lys-OMe is assembled by stepwise synthesis in solution with an overall yield of 44%. N alpha-boc-amino acids, protected with benzyl or benzyloxycarbonyl groups in the side-chains, are coupled as active estes of 1-hydroxybenzotriazole in mixtures of dichloromethane and N,N-dimethylformamide. N alpha-deprotection is accomplished with trifluoroacetic acid. Finally, hydrogenation with palladium on charcoal and ammonium formate produces the pure hexapeptide. A new one-pot synthesis of Boc-Arg(Z2) is described, and the use of this derivative in peptide coupling is studied. The synthetic peptide was coupled to BSA and used in direct immunication of rabbits.     

Synthesis of a putative antigenic heptapeptide from Escherichia coli K88 ab protein fimbriae

The heptapeptide Tyr-Arg-Glu-Asp-Met-Glu-Tyr-OMe, spanning region 213-219 of Escherichia coli K88 ab protein fimbriae, was synthesized with an overall yield of 37% using dicyclohexylcarbodiimide (DCC) and 1-hydroxybenzotriazole (HOBt) preactivation in all condensation reactions. The C-terminal was protected as the methyl ester. The protection scheme of N alpha-tert-butyloxycarbonyl-(Boc) and benzyl-(Bzl) or benzyloxycarbonyl (Z) groups for side chain protection was found to be orthogonal when a mixture of trifluoroacetic acid (TFA), phenol (PhOH) and p-cresol (CrOH) was used for repetitive deprotection. The final deprotection of Boc-Tyr(Bzl)-Arg(Z2)-Glu(Bzl)-Asp(Bzl)-Met-Glu(Bzl+ ++)-Tyr(Bzl)-OMe (17) was accomplished in 80% yield by prolonged treatment with hydrogen fluoride, dimethyl sulfide, p-cresol and p-thiocresol. The BSA-linked synthetic peptide was used in immunisation experiments on rabbits.     

Preparation and characterization of the native iron(II)-containing DNA repair AlkB protein directly from Escherichia coli

The Escherichia coli AlkB protein was recently found to repair cytotoxic DNA lesions 1-methyladenine and 3-methylcytosine by using a novel iron-catalyzed oxidative demethylation mechanism. This protein belongs to a family of 2-ketoglutarate-Fe(II)-dependent dioxygenase proteins that utilize iron and 2-ketoglutarate to activate dioxygen for oxidation reactions. We report here the overexpression and isolation of the native Fe(II)-AlkB with a bound cofactor, 2-ketoglutarate, directly from E. coli. UV-vis measurements showed an absorption peak at 560 nm, which is characteristic of a bidentate 2-ketoglutarate bound to an iron(II) ion. Addition of excess amounts of single-stranded DNA to this isolated Fe(II)-AlkB protein caused a 9 nm shift of the 560 nm band to a higher energy, indicating a DNA-binding-induced geometry change of the active site. X-ray absorption spectra of the active site iron(II) in AlkB suggest a five-coordinate iron(II) center in the protein itself and a centrosymmetric six-coordinate iron(II) site upon addition of single-stranded DNA. This geometry change may play important roles in the DNA damage-searching and damage-repair functions of AlkB. These results provide direct evidence for DNA binding to AlkB which modulates the active site iron(II) geometry. The isolation of the native Fe(II)-AlkB also allows for further investigation of the iron(II) center and detailed mechanistic studies of the dioxygen-activation and damage-repair reactions performed by AlkB.     

Construction, expression, and characterization of recombinant hirudin in Escherichia coli

The mutant gene of HV2-K47 was obtained by polymerase chain reaction-directed mutagenesis and expressed in Escherichia coli. Many elements that could affect its expression level were compared. The product was purified to homogeneity via three chromatographic steps—ion exchange, gel filtration, and reverse phase chromatography—on the AKTA Explorer System. The antithrombin activity of HV2-K47 is much higher than that of recombinant HV2. Some properties and expression conditions were investigated systematically, which would be useful for further studies of hirudin and other small proteins.     

Molecular imprinting of proteins emerging as a tool for protein recognition

This article gives the recent developments in molecular imprinting for proteins. Currently bio-macromolecules such as antibodies and enzymes are mainly employed for protein recognition purposes. However, such bio-macromolecules are sometimes difficult to find and/or produce, therefore, receptor-like synthetic materials such as protein-imprinted polymers have been intensively studied as substitutes for natural receptors. Recent advances in protein imprinting shown here demonstrate the possibility of this technique as a future technology of protein recognition.     

Synthesis of tetrahydroisoquinoline-based pseudopeptides and their characterization as suitable reverse turn mimetics

New peptidomimetics containing the Tic moiety were synthesized in enantiomerically pure form and their conformational features were studied by NMR, IR, and molecular modeling techniques. The presence of a reverse turn conformation was observed in all the structures, suggesting the key role of the scaffold as reverse turn inducer. In particular, all the analyses led to the conclusion that a β-turn conformation is mostly stabilized in tetrapeptide mimetic 4b and in hexapeptide mimetics 5a,b. In the case of 5a,b, the C1 stereochemistry plays a central role in determining stable conformations, supporting the formation of a β-hairpin arrangement with a 14-membered intramolecular hydrogen bond ring only in 5b.     

Affinity capillary electrophoresis applied to the studies of interactions of a member of heat shock protein family with an immunosuppressant

The bioaffinity of receptor-ligand interactions is investigated by determining the binding constant (association constant or dissociation constant) of the resulting complex utilizing affinity capillary electrophoresis (ACE). The ACE binding assay was established with a potent immunosuppressant, deoxyspergualin (DSG), that binds specifically to Hsc70, a constitutive or cognate member of heat shock protein 70 (Hsp70) family. Quantitative determination of binding constants under different running buffer systems provide comparative results. The association constants for the interaction between Hsc70 protein and DSG were found to be 5.7·10⁴ M⁻¹ in a buffer with pH 6.95 and 6.3·10⁴ M⁻¹ in a buffer with pH 5.30 (or corresponding dissociation constants, 18 and 16 μM, respectively) based on Scatchard analyses. Binding of DSG to a synthetic peptide, SINPDEAVAYGAAV-QAAILSGDK, one of the DSG-binding fragments found from tryptic digest of Hsc70 protein, provides further detailed information for the understanding of Hsc70 binding domain. The applicability of using coated capillaries was also evaluated for probing Hsc70-DSG interaction.     

Synthesis of a putative subtype specific antigenic heptapeptide from Escherichia coli K88 ad protein fimbriae

The heptapeptide methyl ester Phe-Asn-Glu-Asn-Met-Ala-Tyr-OMe covering the amino acid sequence of the region 213-219 of Escherichia Coli K88 ad protein fimbriae is synthesized using N alpha-t-butyloxycarbonyl-protection and benzyl groups for side-chain-protection. All condensation reactions are performed in 84-97% yield by preactivation of the protected amino acids by dicyclohexylcarbodiimide (DCC) and 1-hydroxybenzotriazole (HOBt), and reaction of the resulting active ester with amine in the presence of 4-methylmorpholine (NMM). A mechanism is proposed for the nitrile formation in the side-chain of activated asparagine, and the suppression of this side-reaction is investigated. The repetitive deprotection is performed in a mixture of trifluoroacetic acid (TFA), phenol and p-cresol to give the TFA salts in virtually quantitatively yields. The final deprotection of the heptapeptide is carried out in a mixture of 25% hydrogen fluoride (HF) and dimethyl sulfide (DMS) in an overall yield of 48%. The serological and conformational properties of the synthetic peptide are under investigation.     

Dissolved oxygen concentration affects the accumulation of HIV-1 recombinant proteins in Escherichia coli

A central problem in aerobic growth of any culture is the maintenance of dissolved oxygen concentration (DOC) above growth-limiting levels especially in high-cell density fermentations that are usually of the fed-batch type. Fermentor studies have been conducted to determine the influence of DOC on the production of heterologous proteins in Escherichia coli. The results demonstrated that there is a significant degree of product-to-product variation in the response of heterologous protein accumulation to DOC. For translational fusions of the human immunodeficiency virus-1 (HIV-1) proteins p24Gag and Env41, the imposition of a dissolved oxygen (DO) limitation resulted in 100 and 15% increases in the respective product yields. On the other hand, the imposition of a DO limitation had no effect on the production of a similar translational fusion of the HIV-1 protein p55Gag, and a large negative effect on the production of an influenza protein (C13). The stimulatory effects of DOC on p24Gag production were investigated further. The results of my studies suggested that the stimulatory effect observed at reduced agitation rates on p24Gag accumulation was owing to an oxygen effect and not a shear effect. Furthermore, the results of my investigations indicated that the effect a DOC had on the production of p24Gag was strongly influenced by the cell density at which the culture was induced.     

Expression of a restricted fragment of staphylococcal tetracycline resistance determinant as a fused product in Escherichia coli

Tetracycline resistance (TcR) plasmid pNS1, a deletion derivative constructed from staphylococcal plasmid pTP5, carries a tet determinant which specifies a TcR protein (TET) with a molecular weight of 50 kilodaltons (kDa). In order to express the pNS1-encoded TET as a fused product, a 0.8 kilobase pairs fragment containing 57.1% of tet determinant was inserted into a chloramphenicol resistance determinant. From the nucleotide sequence, it is deduced that the fusion protein (designated CAT'-TET') is a 53 kDa protein composed of 472 amino acids in which the 199 and 262 amino acids are derived from CAT and TET, respectively. Although the molecular weight of CAT'-TET' obtained from the result of sodium dodecyl sulfate polyacrylamide gel electrophoresis (42 kDa) was not in agreement with its predicted weight (53 kDa), the ratio of TET' segment to the fusion protein (22 kDa/42 kDa) corresponded almost exactly to that deduced from the nucleotide sequence (29 kDa/53 kDa). The expression of CAT'-TET' in Escherichia coli caused a rapid decrease in growth rate and in the number of viable cells. This result is thought to be due to the toxic effect of CAT'-TET' on the cell membrane.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

Genetic algorithms for protein conformation sampling and optimization in a discrete backbone dihedral angle space

We have investigated protein conformation sampling and optimization based on the genetic algorithm and discrete main chain dihedral state model. An efficient approach combining the genetic algorithm with local minimization and with a niche technique based on the sharing function is proposed. Using two different types of potential energy functions, a Go-type potential function and a knowledge-based pairwise potential energy function, and a test set containing small proteins of varying sizes and secondary structure compositions, we demonstrated the importance of local minimization and population diversity in protein conformation optimization with genetic algorithms. Some general properties of the sampled conformations such as their native-likeness and the influences of including side-chains are discussed.