Electrogenerated chemiluminescence: an oxidative-reductive mechanism between quinolone antibiotics and tris(2,2'-bipyridyl)ruthenium(II)

The cyclic voltammetry and electrogenerated chemiluminescent (ECL) reactions of a series of quinolone and fluoroquinolone antibiotics were investigated in a flow injection analysis (FIA) system. 7-Piperazinyl fluoroquinolone antibiotics were found to participate as a coreactant in an oxidative-reductive ECL mechanism with tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) as the luminescent reagent. The reaction mechanism was investigated in order to understand and optimize the processes leading to light emission. The optimal conditions included a solution pH ∼7 at a flow rate of 3.0 mL min⁻¹ with no added organic modifier and application of 1.2 V vs. a Pt quasi-reference electrode (QRE). Fluoroquinolones containing a tertiary distal nitrogen on the piperazine ring, such as enrofloxacin and ofloxacin, reacted to produce more intense ECL than those with a secondary nitrogen, such as ciprofloxacin and norfloxacin. The method linear range, precision, detection limits, and sensitivity for the detection of enrofloxacin and ciprofloxacin were compared to that of tripropylamine. The method was applied to the determination of the ciprofloxacin content in a pharmaceutical preparation. The assay is discussed in terms of its analytical figures of merit, ease of use, speed, accuracy and application to pharmaceutical samples.     

Determination of quinolone antibiotics in urine by capillary electrophoresis with chemiluminescence detection

A novel and simple method is presented for the determination of norfloxacin, ciprofloxacin, and ofloxacin by capillary electrophoresis with chemiluminescence detection. This method is based on the enhancing effect of quinolones on the chemiluminescence reaction of the Ce(SO₄)₂–Ru(bpy)₃²⁺–HNO₃ system. Three quinolones were successfully separated and detected under optimum conditions. The obtained detection limits were 2.3×10^–7 mol/L, 5.2×10^–8 mol/L, and 7.8×10^–8 mol/L for ciprofloxacin, norfloxacin, and ofloxacin, respectively. The RSD of migration time and peak area were less than 1.8 and 3.8% (n = 5), respectively. The applicability of the proposed method was illustrated in the determination of ofloxacin in eye drops and of norfloxacin in human urine samples, and the monitoring of pharmacokinetics for norfloxacin.     

Separation and simultaneous determination of quinolone antibiotics by capillary zone electrophoresis

Summary The potential of capillary zone electrophoresis has been investigated for the separation and quantitative determination of some quinolone antibiotics. The influence of different conditions, such as the nature and concentration of the electrophoretic electrolyte, on migration time, peak symmetry, efficiency and resolution was studied. A buffer consisting of 100mm HEPES adjusted to pH 8.5 containing 10% (v/v) acetonitrile was found to furnish a very efficient and stable electrophoretic system for the separation of exoxacin, ciprofloxacin, ofloxacin, oxolinic acid, nalidixic acid and pipemedic acid. A linear relationship between concentration and peak area for each compound was obtained in the concentration range 0.25–40 μg mL⁻¹; detection limits were approximately 0.25 ng mL⁻¹. It was demonstrated that the method can be used for the simultaneous determination of these six antibiotics in serum and urine samples.     

The determination of inorganic chlorine compounds by chemiluminescence reactions

A method is described for the determination of chlorine, chlorine dioxide and hypochlorite in aqueous solutions, involving measurement of the chemiluminescence produced during alkaline oxidation of luminol in the presence of hydrogen peroxide. Two different analytical procedures are employed, one based on a pulse technique and the other on continuous flow. Micromolar or submicromolar quantities can be detected.     

The mechanism of enzymically induced chemiluminescence reactions of lucigenin

Lucigenin (Bis-N-methylacrylium nitrate) reacts with H2O2 to produce ground state and excited state monomer. The excited state monomer decays with the emission of light. When lucigenin is added to reaction mixtures containing vitamin-K-dependent carboxylase, light emission is produced which is inversely proportional to enzyme concentration and co-inhibited with inhibitors of vitamin-K-dependent carboxylase.     

Carbon dots-enhanced luminol chemiluminescence and its application to 2-methoxyestradiol determination

In this study, the fluorescent carbon dots (CDs) of good biocompatibility and low toxicity was prepared by a carbonation route, and a strong enhancement effect of CDs on the luminol-K₃Fe(CN)₆ chemiluminescence (CL) system was observed. 5?±?1?nm CDs were used as catalysts to enhance the reaction sensitivity. In the presence of 2-methoxyestradiol (2-ME), the CL intensity of CDs-luminol-K₃Fe(CN)₆ was significantly inhibited. The relative CL intensity was linearly related to the 2-ME concentration in the range of 1.0?×?10^?9 –1.0?×?10^?7?g?mL^-1 with a lower detection limit of 4.1?×?10^?10?g?mL^?1. As a preliminary application, the highly sensitive method was successfully applied to the determination of 2-ME in both pharmaceutical preparation and serum samples with satisfactory results. The possible mechanism of CL reaction catalyzed by CDs was investigated and the CDs played a role of catalyst in the reaction which could promote the generation of oxygen radicals.

It could be concluded that the enhancement effect on CL by CDs was attributed to the formation of oxygen radicals. The oxidation reaction of luminol was accelerated by oxygen radicals, which led to the enhanced CL emission.     

Flow-injection determination of sugars with immobilized enzyme reactions and chemiluminescence detection

Glucose is determined by reaction with gluocose oxidase to produce hydrogen peroxide which is quantified via a chemiluminescence reaction with luminol. Sucrose, maltose, lactose and fructose are determined by enzymatic conversion to glucose (using invertase, amyloglucosidase, lactase. and glucose isomerase, respectively) and subsequent determination of the glucose, All enzymes are immobilized on controlled-pore glass and contained in flow-through reactors. For glucose, sucrose, and maltose the linear log-log working range 0.2 μM-1 mM, with a detection limit of 0.1 μM; for lactose and fructose the linear working range is 3 μM-1 mM with a detection limit of 1 μM. Assay time is 2 min.     

CdTe nanocrystals-enhanced chemiluminescence from peroxynitrous acid-carbonate and its application to the direct determination of nitrite

It was found that CdTe semiconductor nanocrystals (NCs) can induce a great sensitized effect on chemiluminescence (CL) emission from peroxynitrous acid (ONOOH)-Na(2)CO(3) system. CL spectra, fluorescence (FL) spectra, and the quenching effect of reactive oxygen species were used to investigate the CL reaction mechanism. The CL intensity was proportional to the concentration of nitrite in the range from 0.05 to 50μM. The detection limit (S/N=3) was 0.024μM and the relative standard deviation (RSD) for five repeated measurements of 0.5μM nitrite was 4.2%. This method has been successfully applied to determine nitrite in well water samples with recoveries of 94.0-100.5%. This was the first work for direct (not inhibition effect) determination of analytes using semiconductor NCs-based CL sensor.     

Flow injection electrogenerated chemiluminescence determination of vanadium and its application to environmental water sample

A selective flow injection electrogenerated chemiluminescence(CL) method for the determination of vanadium is described in this paper. It was based on the chemiluminescence reaction of luminol with vanadium(II), which was on-line electrogenerated from vanadate using a flow-through carbon electrolytic cell. Under the optimal conditions, the CL intensity was linear to the concentration of vanadium in the range of 5.0x10(-10)-1.0x10(-7) gml(-1) with a detection limit of 2x10(-10) gml(-1) vanadium. The relative standard deviation was 4% for 5.0x10(-8) gml(-1) vanadium in 11 repeated measurements. The method has been successfully applied to the determination of vanadium in environmental water samples.     

Multiresidue determination of quinolone and fluoroquinolone antibiotics in fish and shrimp by liquid chromatography/tandem mass spectrometry

A multiresidue method was developed to measure low levels of 8 fluoroquinolones (norfloxacin, ofloxacin, danofloxacin, ciprofloxacin, desethylene ciprofloxacin, enrofloxacin, sarafloxacin, and difloxacin) and 4 quinolones (oxolinic acid, flumequine, nalidixic acid, and piromidic acid). Method detection limits range from 0.1 ng/g for quinolones to 0.4 ng/g for fluoroquinolones. Average recoveries range from 57 to 96%, depending on analyte and commodity; relative standard deviations are all less than 18%. The drugs are extracted from tissues using a mixture of ethanol and 1% acetic acid, diluted in aqueous HCI, and defatted by extraction with hexane. The compounds are further isolated using cation-exchange solid-phase extraction and measured using liquid chromatography with electrospray tandem mass spectrometry detection. The method has been evaluated and applied to the analysis of salmon, trout, and shrimp. Detectable residues were observed in 10 out of 73 samples, at concentrations ranging from 0.28 to 16 ng/g.     

Periodate determination by fia with chemiluminescence emission detection, and its application to ethylene glycol

A method for periodate determination is given which combines the rapidity of flow-injection analysis and the sensitivity of chemiluminescence (CL) detection. It is based on the CL emission generated during oxidation of pyrogallol by periodate, and gives a relative standard deviation of 3% and a detection limit of 350 ng with the instrumentation used. The method has been applied to determination of ethylene glycol, with a detection limit of 0.5 mumole. The accuracy of the method is quite good when the ethylene glycol is oxidized in unbuffered solutions, and the interference due to formaldehyde produced can be halved by prior addition of an appropriate amount of iodate. A throughput of 15 samples/min is possible, and the method is suitable for automation and remote control.     

Development of an automatic multi-channel ink-jet ejection chemiluminescence system and its application to the determination of horseradish peroxidase

In this work, an automatic multi-channel ink-jet for chemiluminescence (CL) analysis was developed. The four-channel ink-jet device was controlled by a home-made circuit. Differing from the classic flow injection CL, the whole procedure for CL analysis was automatically completed on a hydrophobic glass side. CL reaction of luminal and hydrogen peroxide for the determination of horseradish peroxidase (HRP) was selected as an application to automatic CL analysis platform. All solutions delivered by different channels were precisely ejected to the same position of the glass slide for the CL analysis. The consumption of reaction solution was reduced to nanoliter level. The whole CL analysis could be completed in less than 4 min, which was benefited from the prompt solution mixing in small size of droplet. The CL intensity increased linearly with HRP concentration in the range from 0.01 to 0.5 μg mL⁻¹. The limit of detection (LOD) (S/N = 3) was 0.005 μg mL⁻¹. Finally, the automatic CL system could also be used for the detection of HRP in HRP–protein conjugates, which showed its practical application in immunoassay.     

3D electrogenerated chemiluminescence: from surface-confined reactions to bulk emission

Among luminescence techniques, electrogenerated chemiluminescence (ECL) provides a unique level of manipulation of the luminescent process by controlling the electrochemical trigger. Despite its attractiveness, ECL is by essence a 2D process where light emission is strictly confined to the electrode surface. To overcome this intrinsic limitation, we added a new spatial dimension to the ECL process by generating 3D ECL at the level of millions of micro-emitters dispersed in solution. Each single object is addressed remotely by bipolar electrochemistry and they generate collectively the luminescence in the bulk. Therefore, the entire volume of the solution produces light. To illustrate the generality of this concept, we extended it to a suspension of multi-walled carbon nanotubes where each one acts as an individual ECL nano-emitter. This approach enables a change of paradigm by switching from a surface-limited process to 3D electrogenerated light emission.     

Multiresidue determination of (fluoro)quinolone antibiotics in chicken by polymer monolith microextraction and field-amplified sample stacking procedures coupled to CE-UV

Simultaneous determination of 9 (fluoro)quinolone antibiotics (FQs) was accomplished by capillary electrophoresis-ultraviolet (CE-UV) based on poly(methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction (PMME) coupled with on-line preconcentration technique of field-amplified sample stacking (FASS). The effects of composition of the acid and organic solvent in the sample solution, sampling time, and voltage on the efficiency of the sample stacking have been systematically investigated. Several parameters that influence extraction efficiency for PMME such as pH of sample solution, extraction volume, and wash and desorption conditions were optimized. In the proposed method, a substantial increase in sensitivity for all the FQs tested was achieved by the combination of PMME procedure with on-line preconcentration of FASS prior to CE analysis. Good linearities were obtained for the 9 tested FQs with the correlation coefficients (R) above 0.9954. The limits of detection (S/N = 3) were found to be 2.4-34.0 ng g⁻¹ and the recoveries ranged from 81.2 to 100% with relative standard deviations less than 11.3%. The proposed PMME-FASS-CE method was applied to the determination of FQs residues in chicken samples.     

A convergent synthetic approach to the nucleoside-type liposidomycin antibiotics

[reaction: see text] A synthetic approach toward the liposidomycins, a family of complex nucleoside-type antibiotics, is reported based on the synthesis of epoxy-amides derived from the reaction of sulfur ylides with the uridyl aldehyde derivative 6. To this end, the epoxy-amide derivative of indoline 14 was stereoselectively prepared and, after treatment with DDQ, transformed into the corresponding N-indole epoxyamide 15. The indole 15 provides ready access to a variety of structures related to the diazepanone core present in the liposidomycins by reaction with a variety of amines.     

Structure and medium effects on the photochemical behavior of nonfluorinated quinolone antibiotics

The photophysical behavior of the quinolone antibiotics, oxolinic (OX), cinoxacin (CNX) and pipemidic (PM) acids was studied as a function of pH and solvent properties. The ground state of these compounds exhibits different protonated forms, which also exist in the first excited states. Theoretical calculations of the Fukui indexes allowed to assigning the different protonation equilibria. The pK values indicate that the acidity of the 3-carboxylic and 4-carbonyl groups increases with the N-atom at position 2 in CNX. It has been found that fluorescence properties are strongly affected by pH, the more fluorescent species is that with protonated carboxylic acid, protonated species at the carbonyl group and the totally deprotonated form present very low fluorescence. The fluorescence behavior also depends on the chemical structure of the quinolone and on the solvent properties. The analysis of the solvent effect on the maximum and the width of the fluorescence band of OX, using the linear solvent-energy relation solvatochromic equation, indicates that the polarizability and hydrogen bond donor ability are the parameters that condition the spectral changes. The hydrogen bond acceptor ability of the solvents also contributes to the spectral shifts of CNX. The compound bearing the piperazinyl group at the position 7, PM only is fluorescent in high protic solvents. These results are discussed in terms of the competition between the intra- and intermolecular hydrogen bonds. The irradiation of OX, CNX and PM using 300 nm UV light led to a very low photodecomposition rate. Under the same conditions the nalidixic acid (NA), a structurally related quinolone, photodecomposes two orders of magnitude faster.     

Development of new synthetic reactions for nitrogen-containing compounds and their application

Nitrogen-containing compounds are core parts not only of natural and synthetic medicines but also of biologically active compounds including natural products. This review focuses on the development of new synthetic reactions for nitrogen-containing compounds via three methodologies: the reductive photocycloaddition reaction of enamides, radical addition reaction, and nucleophilic addition reaction. Newly developed reactions were successfully applied to the synthesis of various types of nitrogen-containing compounds including medicines, lead compounds to new drugs, natural alkaloids, and others.     

HPLC-MS/MS法联合分析环境水体中喹诺酮类抗生素和雌激素

建立了环境水体中15种喹诺酮类抗生素和6种雌激素的HPLC-MS/MS分析方法.该方法统一了两类物质的前处理过程,运用固相萃取技术进行富集及净化,有效降低了基质的干扰.质谱采用SRM监测模式,喹诺酮采用正离子扫描模式,雌激素采用负离子扫描模式.目标化合物在水体中的回收率范围为62.0％～108.3％,RSD在1.1％ ...