Cyclotron production and parameters calculation of <Superscript>48</Superscript>V Nitinol stent for renal arteries in brachytherapy

The Nitinol stent was bombarded in a cyclotron at a flux rate of 4 μA/cm² to produce ⁴⁸V via ⁴⁸Ti (p, n) ⁴⁸V reaction. In this study dose distribution of ⁴⁸V radioactive stent was investigated for renal arteries. Version X-2.6 of the MCNP Monte Carlo radiation transport system code was employed to calculate dose distribution around the stent. As ⁴⁸V is a mixed gamma and beta particle emitter, two separate runs of MCNP for both beta and gamma particles were performed and the total deposited dose was acquired by adding the two mentioned values. In order to verify the simulation, the calculated results have been compared with previous published data for the source. Calculated results show high dose gradient near the stent and the maximum amount of dose deposits at the vessel wall. According to (AAPM) TG-60/149 protocol, the dosimetric parameters, including geometry function, G(ρ,z), radial dose function, g _L (ρ), and anisotropy function, F(ρ,z), were also determined.     

Porous ZrC-carbon microspheres as potential insoluble target matrices for production of <Superscript>188</Superscript>W/<Superscript>188</Superscript>Re

New microsphere sorbents are reported, which could find application in demanding radiation environments and especially as targets for the production of nuclear medicines by neutron irradiation. An easily-synthesized Zr anionic complex was introduced into quaternary amine-functionalised polystyrene-divinylbenzene-based anion-exchange resins by batch adsorption. Upon carbothermal reduction, the precursors were converted to porous carbon matrices containing particles of ZrC and ZrO₂ polymorphs. The most phase-pure material, ZrAX-1, possessed high surface area, multi-scale porosity and high mechanical strength. Adsorption of Re and W was investigated and its possible deployment as a reusable host for the production of ¹⁸⁸W/¹⁸⁸Re is discussed.     

<Superscript>90</Superscript>Y-DOTA-Lanreotide: A potential agent for targeted therapy

Several human tumors such as neuroendocrine tumors, medullary thyroid carcinoma, etc., express somatostatin receptors which specifically bind somatostatin and its analogues such as lanreotide, octreotide, etc. In order to prepare a therapeutic agent for targeting such tumors, attempts were made to prepare ⁹⁰Y-DOTA-Lanreotide. Lanreotide could be successfully conjugated with the macrocyclic chelating agent DOTA (1,4,7,10-tetraaza cyclododecane tetracetic acid) which forms stable complexes with ⁹⁰Y. ⁹⁰Y-DOTA-Lanreotide could be prepared in >98% radiochemical purity and remained stable for 72 hours at room temperature. The tracer showed specific binding to A431 cells. Biodistribution studies in C57BL6 mice bearing melanoma showed ∼1.3% uptake pergram of tumor at 24-hour p.i.     

<Superscript>47</Superscript>Sc production development by cyclotron irradiation of <Superscript>48</Superscript>Ca

The therapeutic radionuclide ⁴⁷Sc was produced through the ⁴⁸Ca(p,2n) channel on a proton beam accelerator. The obtained results show that the optimum proton energies are in the range of 24–17 MeV, giving the possibility to produce ⁴⁷Sc radionuclide containing 7.4% of ⁴⁸Sc. After activation, the powdery CaCO₃ target material was dissolved in HCl and scandium isotopes were isolated from the targets. The performed separation experiments indicate that, due to the simplicity of the operations and the chemical purity of the obtained ⁴⁷Sc the best separation process is when scandium radioisotopes are separated on the 0.2 µm filter.     

Studies on the adsorption of <Superscript>125</Superscript>I on bromide coated silver rods for the preparation of <Superscript>125</Superscript>I-seeds for brachytherapy applications

This article presents the development, the testing and the efficiency estimation of a system for the monitoring of the atmospheric concentration of radon using a detector ionization chamber type in pulse mode for environmental measurements in which the measurement of the average value of the ionization current is completed with the recording of the impulses of the ionization current caused by the alpha disintegrations from the sensible volume of the detector.     

<Superscript>234</Superscript>U/<Superscript>235</Superscript>U activity ratios as a probe for the <Superscript>238</Superscript>U/<Superscript>235</Superscript>U half-life ratio

High-resolution alpha-particle spectrometry was performed on three uranium materials enriched in ²³⁵U. Besides the ²³⁵U peaks, separate peaks belonging to impurity traces of ²³⁴U could be quantified. Relying on the isotopic composition of the uranium, as determined by mass spectrometry, the ratio of the half-lives of ²³⁸U and ²³⁵U was determined via the activity ratio of ²³⁴U and ²³⁵U in the materials. As an intermediate link, the ²³⁴U/²³⁸U half-life ratio was taken from published mass spectrometric analyses of ‘secular equilibrium’ uranium material. The resulting half-life ratio T _1/2(²³⁸U)/T _1/2(²³⁵U) = 6.351±0.031 is in agreement with the commonly adopted half-life values determined by Jaffey et al.     

Preparation of <Superscript>26</Superscript>Al, <Superscript>59</Superscript>Ni, <Superscript>44</Superscript>Ti, <Superscript>53</Superscript>Mn and <Superscript>60</Superscript>Fe from a proton irradiated copper beam dump

The station for pions cancer therapy was operated at PSI from 1980 to 1992. After a cooling time of 12 years it’s made of copper beam dump was cut and samples were taken for analytical purposes. The sampling collected about 500 g of high active copper chips that can be used for separation of exotic radionuclides. The analyses by gamma spectrometry, LSC and AMS showed main nuclides present to be ⁶⁰Co, ⁵⁴Mn, ²²Na, ⁶⁵Zn, ²⁶Al, ⁵³Mn, ⁵⁹Ni, ⁶³Ni, ⁵⁵Fe and ⁶⁰Fe and ⁴⁴Ti with a daughter nuclide ⁴⁴Sc. In the frame of ERAWAST project a procedure combining selective precipitation and ion exchange for the separation of the rare radionuclides from the copper beam dump was developed. The proposed separation procedure is easy for remote controlled implementation in a hot cell. The ion exchange separation of Ni, Al, Mg, Ti and Fe was complete and high decontamination factors for copper and cobalt were achieved. Based on the developed procedure a remotely controlled system for separation of exotic radionuclides from the copper chips was set up. The full scale system was installed in a hot cell where high activity levels can be handled. In order to evaluate the reliability and functionality of the system extensive tests have been done. During the test period 13.86 g in total of the proton irradiated copper beam dump were processed for separation of ²⁶Al, ⁵⁹Ni, ⁵³Mn, ⁴⁴Ti and ⁶⁰Fe. The results showed that the system was operational and the radionuclide separation was selective with high chemical yield. The procedure manages as well the generated liquid wastes containing high level of ⁶⁰Co activity.     

Radiochemical separation and quality assessment for the <Superscript>68</Superscript>Zn target based <Superscript>64</Superscript>Cu radioisotope production

The radiochemical separation of the different radionuclides (⁶⁴Cu, ⁶⁷Cu, ⁶⁷Ga, ⁶⁶Ga, ⁵⁶Ni, ⁵⁷Ni, ⁵⁵Co, ⁵⁶Co, ⁵⁷Co, ⁶⁵Zn, ¹⁹⁶Au) induced in the Ni supported Cu substrate — ⁶⁸Zn target system, which was bombarded with the 29.0 MeV proton beam, was performed by ion-exchange chromatography using successive isocratic and/or concentration gradient elution techniques. The overlapped gamma-ray spectrum analysis method was developed to assess the ⁶⁷Ga and ⁶⁷Cu content in the ⁶⁴Cu product and even in the post-⁶⁷Ga production ⁶⁸Zn target solution without the support of radiochemical separation. This method was used for the assessment of ⁶⁴⁺⁶⁷Cu radioisotope separation from ⁶⁷Ga, the quality control of ⁶⁴Cu product and the determination of the ⁶⁸Zn (p,2p)⁶⁷Cu reaction yield. The improvement in the targetry and the optimization of proton beam energy for the ⁶⁸Zn target based ⁶⁴Cu and ⁶⁷Ga production were proposed based on the stopping power and range of the incident proton and on the excitation functions, reaction yields and different radionuclides induced in the target system.     

Separation of radioarsenic from irradiated germanium oxide targets for the production of <Superscript>71</Superscript>As and <Superscript>72</Superscript>As

A method for the separation of no-carrier-added arsenic radionuclides from the bulk amount of proton-irradiated GeO₂ targets as well as from coproduced radiogallium was developed. The radionuclides ⁶⁹Ge and ⁶⁷Ga produced during irradiation of GeO₂ were used as tracers for Ge and Ga in the experiments. After dissolution of the target the ratio of As(III) to As(V) was determined via thin layer chromatography (TLC). The extraction of radioarsenic by different organic solvents from acid solutions containing alkali iodide was studied and optimized. The influence of the concentration of various acids (HCl, HClO₄, HNO₃, HBr, H₂SO₄) as well as of KI was studied using cyclohexane. The optimum separation of radioarsenic was achieved using cyclohexane with 4.75 M HCl and 0.5 M KI and its back-extraction with a 0.1% H₂O₂ solution. The separation leads to high purity radioarsenic containing no radiogallium and <0.001% [⁶⁹Ge]Ge. The overall radiochemical yield is 93 ± 3%. The practical application of the optimized procedure in the production of ⁷¹As and ⁷²As is demonstrated and batch yields achieved were in the range of 75–84% of the theoretical values.     

Measurements of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb in total diet samples: Estimate of dietary intakes of <Superscript>210</Superscript>Po and <Superscript>210</Superscript>Pb for Japanese

To estimate the dietary intakes of ²¹⁰Pb and ²¹⁰Po for the Japanese adults and their annual effective doses, ²¹⁰Pb and ²¹⁰Po were measured for 240 daily diet samples collected at two locations of Ishikawa Prefecture in Japan over three years by duplicate portion studies. No appreciable differences in intake rates of ²¹⁰Pb and ²¹⁰Po and their ²¹⁰Po/²¹⁰Pb ratios were seen among the years in each district, and between the two districts. The intake rates evaluated using 240 diet samples were 0.20 Bq/d/p for ²¹⁰Pb and 0.61 Bq/d/p for ²¹⁰Po as a median, respectively. Annual effective doses of ²¹⁰Pb and ²¹⁰Po for Japanese adults were estimated to be 0.050 and 0.053 mSv/y, respectively.     

Sequential separation of <Superscript>99</Superscript>Tc, <Superscript>94</Superscript>Nb, <Superscript>55</Superscript>Fe, <Superscript>90</Superscript>Sr and <Superscript>59/63</Superscript>Ni from radioactive wastes

A sequential separation procedure has been developed for the determination of ⁹⁹Tc, ⁹⁴Nb, ⁵⁵Fe, ⁹⁰Sr and ^59/63Ni in various radioactive wastes generated from nuclear power plants. Ion exchange and extraction chromatography were adopted for individual separation of the radionuclides. Precipitation was supplementarily utilized for both purification of the individual radionuclides and preparation of the radionuclide sources for use in a radioactivity measurement. The chromatographic separation behavior of the radionuclides both from the sample matrix metals and from one another was investigated using stable metals, Re (as a surrogate of ⁹⁹Tc), Nb, Fe, Sr and Ni. The validity of the procedure for reliability and applicability was evaluated by measuring the recovery of the metal carriers added to synthetic radioactive waste solutions. The recoveries by the chromatographic separation were in the range of 84.8 to 102.2% with 2s of less than 8.6%, the recoveries by the precipitation being in the range of 84.3 to 97.3% with 2s of less than 10.9%.     

Disequilibrium of dissolved <Superscript>234</Superscript>U/<Superscript>238</Superscript>U and <Superscript>210</Superscript>Po/<Superscript>210</Superscript>Pb in Greek rivers

For the first time, a radiological study for the dissolved ²³⁸U, ²³⁴U, ²¹⁰Pb and ²¹⁰Po was held in major Greek rivers across the country. ²³⁴U/²³⁸U activity ratios are above one in all samples and ²¹⁰Po/²¹⁰Pb activity ratios are respectively below the unit indicating the disequilibrium in the samples. Quite satisfactory correlations were observed among ²³⁴U and ²³⁸U as well as among ²¹⁰Po and ²¹⁰Pb values. Uranium isotopes were separated by ion exchange and electroplated on stainless steel plates. ²¹⁰Po was spontaneously deposited on nickel plates, while ²¹⁰Pb was indirectly determined through the ingrowth of ²¹⁰Po. The sources were measured by a-spectrometry.     

<Superscript>18</Superscript>F- and <Superscript>11</Superscript>C-labelling of quantum dots with n.c.a. [<Superscript>18</Superscript>F]fluoroethyltosylate and [<Superscript>11</Superscript>C]methyliodide: a feasibility study

Quantum dots functionalized on the outer surface with either amino- or carboxyl functions were labelled with [¹⁸F]fluoroethyltosylate and [¹¹C]methyliodide in order to use the positron emitter-labelled fluorescence agents for multimodality imaging techniques, i.e. fluorescence imaging and positron emission tomography. ¹⁸F-Labelling of both compounds was realized with yields up to 5% as determined by size exclusion chromatography, which is twice as much as reported in literature before [1]. ¹¹C-Labelling of amino- and carboxyl-QDs proceeded with good yields (up to 45 and 35%, respectively) under optimized reaction conditions. In general for both QD-types and both labelling agents the labelling yield increased with the amount of QDs used in the reaction as well as with reaction time and reaction temperature.     

Thick silver electrodeposition on copper substrate for <Superscript>109</Superscript>Cd production

Spectrometers for the lowest-level radiometric measurements require materials of extreme radiopurity. Measurements of rare nuclear decays, e.g., neutrinoless double-beta decay, can require construction and shielding materials with bulk radiopurity reaching one micro-Becquerel per kilogram or less. When such extreme material purity is achieved, surface contamination, particularly solid daughters in the natural radon decay chains, can become the limiting background. High-purity copper is an important material for ultra-low-background spectrometers and thus is the focus of this work. A method for removing surface contamination at very low levels without attacking the bulk material is described. An assay method using a low-background proportional counter made of the material under examination is employed, and the preliminary result of achievable surface contamination levels is presented.     

Systematic radiochemical separation for the determination of <Superscript>99</Superscript>Tc, <Superscript>90</Superscript>Sr, <Superscript>94</Superscript>Nb, <Superscript>55</Superscript>Fe and <Superscript>59,63</Superscript>Ni in low and intermediate radioactive waste samples

A simple and rapid separation procedure was systemized for the determination of ⁹⁹Tc, ⁹⁰Sr, ⁹⁴Nb, ⁵⁵Fe and ^59,63Ni in low and intermediate level radioactive wastes. The integrated procedure involves precipitation, anion exchange and extraction chromatography for the separation and purification of individual radionuclide from sample matrix elements and from other radionuclides. After separating Re (as a surrogate of ⁹⁹Tc) on an anion change resin column, Sr, Nb, Fe and Ni were sequentially separated as follows; Sr was separated as Sr (Ca-oxalate) co-precipitates from Nb, Fe and Ni followed by purification using Sr-Spec extraction chromatographic resin. Nb was separated from Fe and Ni by anion exchange chromatography. Fe was separated from Ni by anion exchange chromatography. Ni was separated as Ni-dimethylglyoxime precipitates after the removal of ^134,137Cs and ^110mAg by Cs-phosphotungstate and AgCl precipitation, respectively. Finally, the radionuclide sources were prepared by precipitation for their radioactivity measurements. The reliability of the procedure was evaluated by measuring the recovery of chemical carriers added to a synthetic radioactive waste solution.     

Determination of <Superscript>3</Superscript>H, <Superscript>226</Superscript>Ra, <Superscript>222</Superscript>Rn and <Superscript>238</Superscript>U in Austrian ground- and drinking water

Screening measurements for ³H, ²²⁶Ra, ²²²Rn and ²³⁸U in ground water were performed within a ground- and drinking water project in Austria. The aim of this project is to get an overview of the distribution of natural radionuclide activity concentration levels in ground water bodies. In some cases this water is used for drinking water abstraction. In this paper methods and results of the screening measurements are presented. Regions with high activity concentrations were identified and in these regions further investigation for ²²⁸Ra, ²¹⁰Pb and ²¹⁰Po will be conducted.     

Measuring <Superscript>137</Superscript>Cs, <Superscript>40</Superscript>K and decay products of <Superscript>226</Superscript>Ra and <Superscript>232</Superscript>Th in samples of different nature by a multidetector spectrometer

A coincidence method for measuring ¹³⁷Cs, ⁴⁰K, ²²⁶Ra and ²³²Th decay products activity in soil, vegetation and fish samples, was applied to the six-crystal gamma-coincidence spectrometer PRIPYAT-2M. In this way, some problems appeared in simultaneous measurement of ¹³⁷Cs, ²²⁶Ra and ²³²Th by NaI(Tl) detectors and the PRIPYAT-2M spectrometer were solved. The obtained results were agreeable with the HPGe spectrometer ones.     

Extraction chromatography for the separation of <Superscript>239</Superscript>Np from <Superscript>243</Superscript>Am

Summary An extraction chromatography method was developed for the separation of 239Np from ²⁴³Am in nitric acid solution. A sorbent based on aliphatic quaternary amine Aliquat-336 and hydrophobized silica gel was prepared. ²³⁹Np reduced to the oxidation state(IV) with ferrous sulfamate in 2M or 6M HNO₃ sorbs on the prepared silica gel column. After washing with 0.1M ferrous sulfamate in 2.5M HNO₃, ²³⁹Np is eluted with 0.1M HNO₃ containing 0.02M HF. The separation of ²⁴³Am from ²³⁹Np is very effective. The purity of ²³⁹Np was found to be better than 99.5%. The proposed ²³⁹Np milking procedure is suitable for the preparation of ²³⁹Np tracer that can be used for the determination of ²³⁷Np radiochemical yield.     

Distribution of <Superscript>14</Superscript>C, <Superscript>90</Superscript>Sr and <Superscript>228</Superscript>Th in an elephant tusk

The period of date of death of an elephant can be assessed by analyzing four different radionuclides, ¹⁴C, ⁹⁰Sr, ²²⁸Th and ²³²Th in its ivory. These nuclides are supposed to have variing concentrations at different parts of a tusk. The reason is the procedure of growth which takes place at the butt-site of a tusk. Therefore the site of sampling could have a big influence on the assessed date of death. However, to find out if the position of sampling is important a complete tusk was analyzed regarding the distribution of these nuclides. Results show that the concentration activity of ¹⁴C and ²²⁸Th varies in different parts of a tusk. The activity concentration of ⁹⁰Sr is very similar in all analyzed parts. The conclusion is that sampling at the butt of a tusk is recommended for age assessment.