Molecular energetics of cytosine revisited: a joint computational and experimental study

A static bomb calorimeter has been used to measure the standard molar energy of combustion, in oxygen, at T = 298.15 K, of a commercial sample of cytosine. From this energy, the standard (p degrees = 0.1 MPa) molar enthalpy of formation in the crystalline state was derived as -(221.9 +/- 1.7) kJ.mol(-1). This value confirms one experimental value already published in the literature but differs from another literature value by 13.5 kJ.mol(-1). Using the present standard molar enthalpy of formation in the condensed phase and the enthalpy of sublimation due to Burkinshaw and Mortimer [J. Chem. Soc., Dalton Trans. 1984, 75], (155.0 +/- 3.0) kJ.mol(-1), results in a value for the gas-phase standard molar enthalpy of formation for cytosine of -66.9 kJ.mol(-1). A similar value, -65.1 kJ.mol(-1), has been estimated after G3MP2B3 calculations combined with the reaction of atomization on three different tautomers of cytosine. In agreement with experimental evidence, the hydroxy-amino tautomer is the most stable form of cytosine in the gas phase. The enthalpies of formation of the other two tautomers were also estimated as -60.7 kJ.mol(-1) and -57.2 kJ.mol(-1) for the oxo-amino and oxo-imino tautomers, respectively. The same composite approach was also used to compute other thermochemical data, which is difficult to be measured experimentally, such as C-H, N-H, and O-H bond dissociation enthalpies, gas-phase acidities, and ionization enthalpies.     

Thermochemistry of 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide. Evaluation of the mean dissociation enthalpy of the (N-O) bond

The standard enthalpy of formation of the 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide compound in the gas-phase was derived from the enthalpies of combustion of the crystalline solid measured by static bomb combustion calorimetry and its enthalpy of sublimation determined by Knudsen mass-loss effusion at T= 298.15 K. This value is (383.8 +/- 5.4) kJ mol(-1) and was subsequently combined with the experimental gas-phase enthalpy of formation of atomic oxygen and with the computed gas-phase enthalpy of formation of 2-amino-3-quinoxalinecarbonitrile, (382.0 +/- 6.3) kJ mol(-1), in order to estimate the mean (N-O) bond dissociation enthalpy in the gas-phase of 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide. The result obtained is (248.3 +/- 8.3) kJ mol(-1), which is in excellent agreement with the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G(d) computed value.     

Experimental and computational thermochemical study of 2-thiobarbituric acid: structure-energy relationship

This paper reports an experimental and computational thermochemical study on 2-thiobarbituric acid (2-thioxodihydropyrimidine-4,6(1H,5H)-dione), [CAS 504-17-6]. The value of the standard (p(0) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by bomb combustion calorimetry, using a rotatory bomb, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -(396.8 ± 0.9) kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as (118.3 ± 2.2) kJ·mol(-1). From these results a value of -(278.5 ± 2.4) kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study of the molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

Calorimetric and computational study of indanones

Condensed phase standard (p degrees = 0.1 MPa) molar enthalpies of formation for 1-indanone, 2-indanone, and 1,3-indandione were derived from the standard molar enthalpies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpies of sublimation for 1-indanone and 2-indanone, at T = 298.15 K, were measured both by correlation-gas chromatography and by Calvet microcalorimetry leading to a mean value for each compound. For 1,3-indandione, the standard molar enthalpy of sublimation was derived from the vapor pressure dependence on temperature. The following enthalpies of formation in gas phase, at T = 298.15 K, were then derived: 1-indanone, -64.0 +/- 3.8 kJ mol(-1); 2-indanone, -56.6 +/- 4.8 kJ mol(-1); 1,3-indandione, -165.0 +/- 2.6 kJ mol(-1). The vaporization and fusion enthalpies of the indanones studied are also reported. In addition, theoretical calculations using the density functional theory with the B3LYP and MPW1B95 energy functionals and the 6-311G** and cc-pVTZ basis sets have been performed for these molecules and the corresponding one-ring species to obtain the most stable geometries and to access their energetic stabilities.     

Experimental and computational thermochemical study of barbituric acids: structure-energy relationship in 1,3-dimethylbarbituric acid

This paper reports an experimental and computational thermochemical study on 1,3-dimethylbarbituric acid. The value of the standard (p° = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by static bomb combustion calorimetry, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -639.6 ± 1.9 kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as 92.3 ± 0.6 kJ·mol(-1). From these results a value of -547.3 ± 2.0 kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study on molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.     

Energetics of the N-O bonds in 2-hydroxyphenazine-di-N-oxide

The standard enthalpy of formation and the enthalpy of sublimation of crystalline 2-hydroxyphenazine-di-N-oxide, at T = 298.15 K, were determined from isoperibol static bomb combustion calorimetry and from Knudsen effusion experiments, as -76.7 +/- 4.2 kJ.mol(-1) and 197 +/- 5 kJ.mol(-1), respectively. The sum of these two quantities gives the standard enthalpy of formation in the gas-phase for this compound, delta(f)H(m)degrees(g) = 120 +/- 6 kJ.mol(-1). This value was combined with the gas-phase standard enthalpy of formation for 2-hydroxyphenazine retrieved from a group estimative method yielding the mean (N-O) bond dissociation enthalpy, in the gas-phase, for 2-hydroxyphenazine-di-N-oxide. The result obtained with this strategy is (DH(m)degrees (N - O)) = 263 +/- 4 kJ.mol(-1), which is in excellent agreement with the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G(d) computed value, 265 kJ.mol(-1).     

Thermochemistry of 2,5-thiophenedicarboxylic acid

The enthalpies of combustion and sublimation of 2,5-thiophenedicarboxylic acid [CASRN 4282-31-9] were measured by rotary-bomb combustion calorimetry and the method of transference in a saturated stream of nitrogen, and the gas-phase enthalpy of formation was determined, Delta(f)H(o)(m)(g) = -(632.6 +/- 2.2) kJ x mol(-1). Standard ab initio molecular orbital calculations at the G2(MP2) and G3(MP2) levels were performed, and a theoretical study on the molecular and electronic structure of the compound has been carried out. The three most stable conformers have been explicitly taken into account. The calculated enthalpy of formation averaged using three different isodesmic reactions, -631.1 kJ x mol(-1), is in very good agreement with the experimental value. A comparison of the substituent effect of the carboxylic groups in benzene and thiophene ring has been made. The relative stability obtained for the substitution of two H atoms by COOH in position 2,5- for thiophene and 1,4- for benzene involve the same energetic effects, DeltaDelta(f)H(o)(m)= -747.6 +/- 2.4 and -748.2 +/- 2.7 kJ x mol(-1), respectively.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).     

The thermochemistry of 2,4-pentanedione revisited: observance of a nonzero enthalpy of mixing between tautomers and its effects on enthalpies of formation

The enthalpies of formation of pure liquid and gas-phase (Z)-4-hydroxy-3-penten-2-one and 2,4-pentanedione are examined in the light of some more recent NMR studies on the enthalpy differences between gas-phase enthalpies of the two tautomers. Correlation gas chromatography experiments are used to evaluate the vaporization enthalpies of the pure tautomers. Values of (51.2 +/- 2.2) and (50.8 +/- 0.6) kJ.mol(-1) are measured for pure 2,4-pentanedione and (Z)-4-hydroxy-3-penten-2-one, respectively. The value of (50.8 +/- 0.6) kJ.mol(-1) can be contrasted to a value of (43.2 +/- 0.2) kJ.mol(-1) calculated for pure (Z)-4-hydroxy-3-penten-2-one when the vaporization enthalpy is measured in a mixture of tautomers. The difference is attributed to an endothermic enthalpy of mixing that destabilizes the mixture relative to the pure components. Calculation of new enthalpies of formation for (Z)-4-hydroxy-3-penten-2-one and 2,4-pentanedione in both the gas, Delta(f)H degrees (m)(g) = (-378.2 +/- 1.2) and (-358.9 +/- 2.5) kJ.mol(-1), respectively, and liquid phases, Delta(f)H degrees (m)(l) = (-429.0 +/- 1.0) and (-410.1 +/- 1.2) kJ.mol(-1), respectively, results in enthalpy differences between the two tautomers both in the liquid and gas phases that are identical within experimental error, and in excellent agreement with recent gas-phase NMR studies.     

Structure-energy relationship in barbituric acid: a calorimetric, computational, and crystallographic study

This paper reports the value of the standard (p(o) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K for barbituric acid. The enthalpies of combustion and sublimation were measured by static bomb combustion calorimetry and transference (transpiration) method in a saturated N2 stream and a gas-phase enthalpy of formation value of -(534.3 +/- 1.7) kJ x mol(-1) was determined at T = 298.15 K. G3-calculated enthalpies of formation are in very good agreement with the experimental value. The behavior of the sample as a function of the temperature was studied by differential scanning calorimetry, and a new polymorph of barbituric acid at high temperature was found. In the solid state, two anhydrous forms are known displaying two out of the six hydrogen-bonding patterns observed in the alkyl/alkenyl derivatives retrieved from the Cambridge Crystallographic Database. The stability of these motifs has been analyzed by theoretical calculations. X-ray powder diffraction technique was used to establish to which polymorphic form corresponds to the commercial sample used in this study and to characterize the new form at high temperature.     

Increasing stability of the fullerenes with the number of carbon atoms: the experimental evidence

The values of the molar standard enthalpies of formation, Delta(f)H(o)(m)(C(76), cr) = (2705.6 +/- 37.7) kJ x mol(-1), Delta(f)H(o)(m)(C(78), cr) = (2766.5 +/- 36.7) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), cr) = (2826.6 +/- 42.6) kJ x mol(-1), were determined from the energies of combustion, measured by microcombustion calorimetry on a high-purity sample of the D(2) isomer of fullerene C(76), as well as on a mixture of the two most abundant constitutional isomers of C(78) (C(2nu)-C(78) and D(3)-C(78)) and C(84) (D(2)-C(84), and D(2d)-C(84). These values, combined with the published data on the enthalpies of sublimation of each cluster, lead to the gas-phase enthalpies of formation, Delta(f)H(o)(m)(C(76), g) = (2911.6 +/- 37.9) kJ x mol(-1); Delta(f)H(o)(m)(C(78), g) = (2979.3 +/- 37.2) kJ x mol(-1), and Delta(f)H(o)(m)(C(84), (g)) = (3051.6 +/- 43.0) kJ x mol(-1), results that were found to compare well with those reported from density functional theory calculations. Values of enthalpies of atomization, strain energies, and the average C-C bond energy were also derived for each fullerene. A decreasing trend in the gas-phase enthalpy of formation and strain energy per carbon atom as the size of the cluster increases is found. This is the first experimental evidence that these fullerenes become more stable as they become larger. The derived experimental average C-C bond energy E(C-C) = 461.04 kJ x mol(-1) for fullerenes is close to the average bond energy E(C-C) = 462.8 kJ x mol(-1) for polycyclic aromatic hydrocarbons (PAHs).     

Thermodynamic study of sesamol, piperonyl alcohol, piperonylic acid and homopiperonylic acid: a combined experimental and theoretical investigation

The standard (p(o)= 0.1 MPa) molar energies of combustion in oxygen, at T= 298.15 K, of four 1,3-benzodioxole derivatives (sesamol, piperonyl alcohol, piperonylic acid and homopiperonylic acid) were measured by static bomb calorimetry. The values of the standard molar enthalpies of sublimation, at T= 298.15 K, were derived from vapour pressure-temperature measurements using the Knudsen effusion technique. Combining these results the standard molar enthalpies of formation of the compounds, in the gas phase, at T= 298.15 K, have been calculated: sesamol (-325.7 +/- 1.9) kJ mol(-1); piperonyl alcohol (-329.0 +/- 2.0) kJ mol(-1); piperonylic acid (-528.9 +/- 2.6) kJ mol(-1) and homopiperonylic acid (-544.5 +/- 2.9) kJ mol(-1). The most stable geometries of all the compounds were obtained using the density functional theory with the B3LYP functional and two basis sets: 6-31G** and 6-311G**. The nonplanarity of the molecules was analyzed in terms of the anomeric effect, which is believed to arise from the interaction between a nonbonded oxygen p orbital and the empty orbital sigma*(CO) involving the other oxygen atom. Calculations were performed to obtain estimates of the enthalpies of formation of all the benzodioxoles using appropriate isodesmic reactions. There is a perfect agreement between theoretical and experimental results.     

Thermodynamic and ab initio analysis of the controversial enthalpy of formation of formaldehyde.

There are two values, -26.0 and -27.7 kcal mol(-1), that are routinely reported in literature evaluations for the standard enthalpy of formation, Delta(f) H(o)(298), of formaldehyde (CH(2)=O), where error limits are less than the difference in values. In this study, we summarize the reported literature for formaldehyde enthalpy values based on evaluated measurements and on computational studies. Using experimental reaction enthalpies for a series of reactions involving formaldehyde, in conjunction with known enthalpies of formation, its enthalpy is determined to be -26.05+/-0.42 kcal mol(-1), which we believe is the most accurate enthalpy currently available. For the same reaction series, the reaction enthalpies are evaluated using six computational methods: CBS-Q, CBS-Q//B3, CBS-APNO, G2, G3, and G3B3 yield Delta(f) H(o)(298)=-25.90+/-1.17 kcal mol(-1), which is in good agreement to our experimentally derived result. Furthermore, the computational chemistry methods G3, G3MP2B3, CCSD/6-311+G(2df,p)//B3LYP/6-31G(d), CCSD(T)/6-311+G(2df,p)//B3LYP/6-31G(d), and CBS-APNO in conjunction with isodesmic and homodesmic reactions are used to determine Delta(f) H(o)(298). Results from a series of five work reactions at the higher levels of calculation are -26.30+/-0.39 kcal mol(-1) with G3, -26.45+/-0.38 kcal mol(-1) with G3MP2B3, -26.09+/-0.37 kcal mol(-1) with CBS-APNO, -26.19+/-0.48 kcal mol(-1) with CCSD, and -26.16+/-0.58 kcal mol(-1) with CCSD(T). Results from heat of atomization calculations using seven accurate ab initio methods yields an enthalpy value of -26.82+/-0.99 kcal mol(-1). The results using isodesmic reactions are found to give enthalpies more accurate than both other computational approaches and are of similar accuracy to atomization enthalpy calculations derived from computationally intensive W1 and CBS-APNO methods. Overall, our most accurate calculations provide an enthalpy of formation in the range of -26.2 to -26.7 kcal mol(-1), which is within computational error of the suggested experimental value. The relative merits of each of the three computational methods are discussed and depend upon the accuracy of experimental enthalpies of formation required in the calculations and the importance of systematic computational errors in the work reaction. Our results also calculate Delta(f) H(o)(298) for the formyl anion (HCO(-)) as 1.28+/-0.43 kcal mol(-1).     

The energetics of isomeric benzoxazine diones: isatoic anhydride revisited

The standard (p(o) = 0.1 MPa) molar enthalpy of formation of crystalline 2H-1,3-benzoxazine-2,4(3H)dione was measured, at T= 298.15 K, by static bomb calorimetry and the standard molar enthalpy of sublimation, at T= 298.15 K, was obtained using Calvet microcalorimetry. These values were used to derive the standard molar enthalpy of formation in the gaseous phase, T= 298.15 K, of -(401.0 +/- 3.5) kJ mol(-1). The standard molar enthalpy of sublimation of isatoic anhydride was recalculated, and our recommended experimental value for the standard molar enthalpy of formation in the gaseous phase, T= 298.15 K, is -(406.2 +/- 3.4) kJ mol(-1). Density functional calculations for the two isomers 2H-1,3-benzoxazine-2,4(3H)dione and isatoic anhydride, in which the ring nitrogen and oxygen have been transposed, confirm the experimental evidence of nearly identical thermochemical stability for these isomers.     

Experimental and computational investigation of the energetics of the three isomers of monochloroaniline

The standard (p degrees = 0.1 MPa) molar enthalpies of formation of 2-, 3-, and 4-chloroaniline were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of vaporization or sublimation of the three isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the three isomers of chloroaniline, in the gaseous phase, at T = 298.15 K, as 53.4 +/- 3.1 kJ.mol(-1) for 2-chloroaniline, 53.0 +/- 2.8 kJ.mol(-1) for 3-chloroaniline, and 59.7 +/- 2.3 kJ.mol(-1) for 4-chloroaniline. These values, which correct previously published data, were used to test the computational methodologies used. Therewith, gas-phase acidities, proton affinities, electron donor capacities, and N-H bond dissociation enthalpies were calculated and found to compare well with available experimental data for these parameters.     

Sublimation enthalpy of dye molecules measured using fluorescence

We present an in-flight fluorescence detection scheme for molecular beams which is applied to determine the enthalpy of sublimation of dye molecules. We investigate tetraphenylporphyrin (TPP), porphine, and nile red, which are believed to be suitable candidates for molecular de Broglie wave interferometry. The measured values are H(sub)(TPP)=142+/-3 kJ/mol, H(sub)(porphine)=87+/-3 kJ/mol, and H(sub)(nile red)=66+/-2 kJ/mol. For TPP, sublimation enthalpies differ in the literature by more than a factor of 2. Our measurements confirm a value at the lower end of this scale. We discuss changes in the character of the molecular flow with the source temperature as a prime reason for discrepancies in the published data.     

Calorimetric and computational study of thiacyclohexane 1-oxide and thiacyclohexane 1,1-dioxide (thiane sulfoxide and thiane sulfone). Enthalpies of formation and the energy of the S=O bond

A rotating-bomb combustion calorimeter specifically designed for the study of sulfur-containing compounds [J. Chem. Thermodyn. 1999, 31, 635] has been used for the determination of the enthalpy of formation of thiane sulfone, 4, Delta(f)H(o) m(g) = -394.8 +/- 1.5 kJ x mol(-1). This value stands in stark contrast with the enthalpy of formation reported for thiane itself, Delta(f)H(o) m(g) = -63.5 +/- 1.0 kJ x mol(-1), and gives evidence of the increased electronegativity of the sulfur atom in the sulfonyl group, which leads to significantly stronger C-SO2 bonds. Given the known enthalpy of formation of atomic oxygen in the gas phase, Delta(f)H(o) m(O,g) = +249.18 kJ x mol(-1), and the reported bond dissociation energy for the S=O bond in alkyl sulfones, BDE(S=O) = +470.0 kJ x mol(-1), it was possible to estimate the enthalpy of formation of thiane sulfoxide, 5, a hygroscopic compound not easy to use in experimental calorimetric measurements, Delta(f)H(o) m(5) = -174.0 kJ x mol(-1). The experimental enthalpy of formation of both 4 and 5 were closely reproduced by theoretical calculations at the G2(MP2)+ level, Delta(f)H(o) m(4) = -395.0 kJ x mol(-1) and Delta(f)H(o) m(5) = -178.0 kJ x mol(-1). Finally, calculated G2(MP2)+ values for the bond dissociation energy of the S=O bond in cyclic sulfoxide 5 and sulfone 4 are +363.7 and +466.2 kJ x mol(-1), respectively.     

Enthalpy of the gas-phase CO2 + Mg reaction from ab initio total energies

Various highly accurate ab initio composite methods of Gaussian-n (G1, G2, G3), their variations (G2(MP2), G3(MP2), G3//B3LYP, G3(MP2)//B3LYP), and complete basis set (CBS-Q, CBS-Q//B3LYP) series of models were applied to compute reaction enthalpies of the ground-state reaction of CO2 with Mg. All model chemistries predict highly endothermic reactions, with DeltaH(298) = 63.6-69.7 kcal x mol(-1). The difference between the calculated reaction enthalpies and the experimental value, evaluated with recommended experimental standard enthalpies of formation for products and reactants, is more than 20 kcal x mol(-1) for all methods. This difference originates in the incorrect experimental enthalpy of formation of gaseous MgO given in thermochemical databases. When the theoretical formation enthalpy for MgO calculated by a particular method is used, the deviation is reduced to 1.3 kcal x mol(-1). The performance of the methodologies used to calculate the heat of this particular reaction and the enthalpy of formation of MgO are discussed.     

Calorimetric and computational study of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone)

The enthalpies of combustion and sublimation of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone) were measured by a rotating-bomb combustion calorimeter and the Knudsen effusion technique, and the gas-phase enthalpy of formation was determined, Delta(f)H(m)*(g) = -326.3 +/- 2.0 kJ mol(-1). Standard ab initio molecular orbital calculations at the G2(MP2) level were performed, and a theoretical study on molecular and electronic structure of the compound has been carried out. Calculated Delta(f)H(m)*(g) values agree very well with the experimental one. These experimental and theoretical studies support the relevance of the repulsive electrostatic interaction between sulfur atoms in 1,3-dithiane sulfone, that apparently counterbalances any n(S) --> rho(C-SO2)* stabilizing hyperconjugative interaction.     

Structure and energetic properties of 1,5-dinitrobiuret

The two-dimensional potential energy scan shows that the pseudo-trans conformer of 1,5-dinitrobiuret (DNB) is the most stable form of isolated molecule, while the pseudo-cis conformer is about 7.5 kJ/mol higher in energy. Thus, the structure of gaseous DNB is different from that in crystal state, where the molecules have pseudo-cis conformation. The value of enthalpy of formation of gaseous DNB (?257 ± 5 kJ/mol) is calculated from isodesmic reactions using G4 energies. Combining this value with empirically estimated enthalpy of sublimation, the enthalpy of formation of crystal DNB is predicted to be ?415 ± 15 kJ/mol. The bond dissociation enthalpies are calculated for all bonds. The energy of the weakest N–NO₂ bonds is equal to 190–200 kJ/mol. Similar calculations were carried out for biuret. The gaseous biuret exists predominantly in the pseudo-trans form. The calculated enthalpy of formation of gaseous biuret agrees well with the experimental one. The correlation of calculated bond energies with corresponding bond distances and electron density is discussed for biuret and DNB.