UV and IR spectroscopic studies of cold alkali metal ion-crown ether complexes in the gas phase

We report UV photodissociation (UVPD) and IR-UV double-resonance spectra of dibenzo-18-crown-6 (DB18C6) complexes with alkali metal ions (Li(+), Na(+), K(+), Rb(+), and Cs(+)) in a cold, 22-pole ion trap. All the complexes show a number of vibronically resolved UV bands in the 36,000-38,000 cm(-1) region. The Li(+) and Na(+) complexes each exhibit two stable conformations in the cold ion trap (as verified by IR-UV double resonance), whereas the K(+), Rb(+), and Cs(+) complexes exist in a single conformation. We analyze the structure of the conformers with the aid of density functional theory (DFT) calculations. In the Li(+) and Na(+) complexes, DB18C6 distorts the ether ring to fit the cavity size to the small diameter of Li(+) and Na(+). In the complexes with K(+), Rb(+), and Cs(+), DB18C6 adopts a boat-type (C(2v)) open conformation. The K(+) ion is captured in the cavity of the open conformer thanks to the optimum matching between the cavity size and the ion diameter. The Rb(+) and Cs(+) ions sit on top of the ether ring because they are too large to enter the cavity of the open conformer. According to time-dependent DFT calculations, complexes that are highly distorted to hold metal ions open the ether ring upon S(1)-S(0) excitation, and this is confirmed by extensive low-frequency progressions in the UVPD spectra.     

UV and IR spectroscopy of cold 1,2-dimethoxybenzene complexes with alkali metal ions

We report UV photodissociation (UVPD) and IR-UV double-resonance spectra of 1,2-dimethoxybenzene (DMB) complexes with alkali metal ions, M(+)·DMB (M = Li, Na, K, Rb, and Cs), in a cold, 22-pole ion trap. The UVPD spectrum of the Li(+) complex shows a strong origin band. For the K(+)·DMB, Rb(+)·DMB, and Cs(+)·DMB complexes, the origin band is very weak and low-frequency progressions are much more extensive than that of the Li(+) ion. In the case of the Na(+)·DMB complex, spectral features are similar to those of the K(+), Rb(+), and Cs(+) complexes, but vibronic bands are not resolved. Geometry optimization with density functional theory indicates that the metal ions are bonded to the oxygen atoms in all the M(+)·DMB complexes. For the Li(+) complex in the S(0) state, the Li(+) ion is located in the same plane as the benzene ring, while the Na(+), K(+), Rb(+), and Cs(+) ions are located off the plane. In the S(1) state, the Li(+) complex has a structure similar to that in the S(0) state, providing the strong origin band in the UV spectrum. In contrast, the other complexes show a large structural change in the out-of-plane direction upon S(1)-S(0) excitation, which results in the extensive low-frequency progressions in the UVPD spectra. For the Na(+)·DMB complex, fast charge transfer occurs from Na(+) to DMB after the UV excitation, making the bandwidth of the UVPD spectrum much broader than that of the other complexes and producing the photofragment DMB(+) ion.     

Affinity capillary electrophoresis and density functional theory applied to binding constant determination and structure elucidation of hexaarylbenzene-based receptor complex with ammonium cation

Affinity capillary electrophoresis (ACE) and quantum mechanical density functional theory (DFT) calculations have been employed for the investigation of noncovalent interactions between hexaarylbenzene-based receptor (R) and ammonium cation NH(4)(+). Firstly, by means of ACE, the binding constant of the NH(4)R(+) complex in methanol was estimated from the dependence of the effective electrophoretic mobility of the receptor R (in advance corrected by our earlier developed procedure to a reference temperature of 25°C) on the concentration of ammonium ion in the background electrolyte using non-linear regression analysis. The logarithmic form of the apparent binding (stability) constant of NH(4)R(+) complex in the methanolic background electrolyte (25 mM Tris, 50 mM chloroacetate, pH(MeOH) 7.8) was evaluated as log K(NH(4)R) = 4.03 ± 0.15. Secondly, the structural characteristics of NH(4)R(+) complex were determined by DFT calculations.     

Metal cation dependence of interactions with amino acids: bond energies of Cs+ to Gly, Pro, Ser, Thr, and Cys

The interactions of cesium cations with five amino acids (AA) including glycine (Gly), proline (Pro), serine (Ser), threonine (Thr), and cysteine (Cys) are examined in detail. Experimentally, the bond dissociation energies (BDEs) are determined using threshold collision-induced dissociation of the Cs(+)(AA) complexes with xenon in a guided ion beam tandem mass spectrometer. Analyses of the energy-dependent cross sections include consideration of unimolecular decay rates, internal energy of the reactant ions, and multiple ion-neutral collisions. Bond dissociation energies (0 K) of 93.3 ± 2.5, 107.9 ± 4.6, 102.3 ± 4.1, 105.4 ± 4.3, and 96.8 ± 4.2 kJ/mol are determined for complexes of Cs(+) with Gly, Pro, Ser, Thr, and Cys, respectively. Quantum chemical calculations are conducted at the B3LYP, B3P86, MP2(full), and M06 levels of theory with geometries and zero-point energies calculated at the B3LYP level using both HW*/6-311+G(2d,2p) and def2-TZVPPD basis sets. Results obtained using the former basis sets are systematically low compared to the experimental bond energies, whereas the latter basis sets show good agreement. For Cs(+)(Gly), theory predicts the ground-state conformer has the cesium cation binding to the carbonyl group of the carboxylic acid. For Cs(+)(Pro), the secondary nitrogen accepts the carboxylic acid hydrogen to form the zwitterionic structure, and the metal cation binds to both oxygens. Cs(+)(Ser), Cs(+)(Thr), and Cs(+)(Cys) are found to have tridentate binding at the MP2(full) level, whereas the density functional approaches slightly prefer bidentate binding of Cs(+) at the carboxylic acid moiety. Comparison of these results to those for the smaller alkali cations provides insight into the trends in binding affinities and structures associated with metal cation variations.     

Photometric reagents for alkali metal ions, based on crown-ether complex formation--III. 4'-picrylaminobenzo-15-crown-5 derivatives

An extraction study of alkali metal cations has been made with crown-ether reagents, 4'-picrylaminobenzo-15-crown-5 derivatives (HL). On dissociation in alkaline medium, the orange HL gives the blood-red anion L(-) and extracts alkali metal ions into chloroform as coloured complexes of composition ML.HL or ML. The ease of extraction decreases in the order, K(+) > Rb(+) > Cs(+) > Na(+) > Li(+). The extracted complexes are ML.HL for K(+) and Rb(+), and both ML.HL and ML for Na(+). The Li(+) complex is not extracted. The photometric determination of 10-800 ppm of K(+) is possible in the presence of other alkali and alkaline earth metal ions.     

Infrared multiple photon dissociation spectroscopy of cationized histidine: effects of metal cation size on gas-phase conformation

The gas phase structures of cationized histidine (His), including complexes with Li(+), Na(+), K(+), Rb(+), and Cs(+), are examined by infrared multiple photon dissociation (IRMPD) action spectroscopy utilizing light generated by a free electron laser, in conjunction with quantum chemical calculations. To identify the structures present in the experimental studies, measured IRMPD spectra are compared to spectra calculated at B3LYP/6-311+G(d,p) (Li(+), Na(+), and K(+) complexes) and B3LYP/HW*/6-311+G(d,p) (Rb(+) and Cs(+) complexes) levels of theory, where HW* indicates that the Hay-Wadt effective core potential with additional polarization functions was used on the metals. Single point energy calculations were carried out at the B3LYP, B3P86, and MP2(full) levels using the 6-311+G(2d,2p) basis set. On the basis of these experiments and calculations, the only conformation that reproduces the IRMPD action spectra for the complexes of the smaller alkali metal cations, Li(+)(His) and Na(+)(His), is a charge-solvated, tridentate structure where the metal cation binds to the backbone carbonyl oxygen, backbone amino nitrogen, and nitrogen atom of the imidazole side chain, [CO,N(α),N(1)], in agreement with the predicted ground states of these complexes. Spectra of the larger alkali metal cation complexes, K(+)(His), Rb(+)(His), and Cs(+)(His), have very similar spectral features that are considerably more complex than the IRMPD spectra of Li(+)(His) and Na(+)(His). For these complexes, the bidentate [CO,N(1)] conformer in which the metal cation binds to the backbone carbonyl oxygen and nitrogen atom of the imidazole side chain is a dominant contributor, although features associated with the tridentate [CO,N(α),N(1)] conformer remain, and those for the [COOH] conformer are also clearly present. Theoretical results for Rb(+)(His) and Cs(+)(His) indicate that both [CO,N(1)] and [COOH] conformers are low-energy structures, with different levels of theory predicting different ground conformers.     

Modeling metal cation-phosphate interactions in nucleic acids in the gas phase via alkali metal cation-triethyl phosphate complexes

Threshold collision-induced dissociation techniques are employed to determine the bond dissociation energies (BDEs) of complexes of alkali metal cations, Na+, K+, Rb+, and Cs+, to triethyl phosphate (TEP). The primary and lowest energy dissociation pathway in all cases is the endothermic loss of the neutral TEP ligand. Theoretical electronic structure calculations at the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G* level of theory are used to determine the structures, molecular parameters, and theoretical estimates for the BDEs of these complexes. For the complexes to Rb+ and Cs+, theoretical calculations were performed using hybrid basis sets in which the effective core potentials and valence basis sets of Hay and Wadt were used to describe the alkali metal cation, while the standard basis sets were used for all other atoms. The agreement between theory and experiment is excellent for the complexes to Na+ and K+ and is somewhat less satisfactory for the complexes to the heavier alkali metal cations, Rb+ and Cs+, where effective core potentials were used to describe the cation. The trends in the binding energies are examined. The binding of alkali metal cations to triethyl phosphate is compared with that to trimethylphosphate.     

Probing ionophore selectivity in argon-tagged hydrated alkali metal ion-crown ether systems

Crown ethers are an important family of compounds that are closely related to naturally occurring ionophores. Thus, crown ethers are useful in modeling the size-selective behavior of ionophores. Using a combination of infrared predissociation spectroscopy and density functional theory calculations, we have investigated M(+)(18-crown-6 ether)(H(2)O)(1-4) Ar complexes, where M = Li, Na, K, Rb and Cs in the gas phase. The argon-tagging technique was used to lower the internal energies (effective temperatures ~100 K), yielding well-resolved spectra in the OH stretching region for systems containing up to three waters. Spectral changes were monitored as both the size of the ion and degree of hydration were varied. While there is not a particular spectroscopic signature of gas-phase selectivity reported in this work, the unique role that K(+) plays in the systems studied, as a "bridge" between the smaller and larger alkali metal ions, is consistent with the well-known special affinity for K(+) by 18-crown-6 ether in the aqueous phase.     

Investigation of homo- and heterodimer alkali metal cation complexes of resorc[4]arenes by electrospray ionization mass spectrometry

Resorc[4]arenes are compounds with interesting properties, mainly because of their ability to form host-guest complexes with the guest located inside the cavity. The size of the guest limits the complexation, as shown by a competition experiment with tetraalkylammonium ions of different size. By electroscopy ionization tandem mass spectrometric experiments on resorc[4]arene heterodimers bearing an alkali metal ion as guest, it was found that there must be two different binding mechanisms for alkali metal ions with high surface charge density (Li(+) and Na(+)) on the one hand compared with those with a lower surface charge density on the other hand (K(+), Rb(+), Cs(+)).     

Complexation of Calix[4]arene With Alkali Metal Cations: Conformational Binding Selectivity and Cation-π Driven Inclusion

Hartree-Fock, second order Møller-Plesset perturbation theory, and density functional theory calculations were carried out to analyse the complexation of calix[4]arene with cationic species including H + and the alkali metal cations (Li + , Na + , K + , Rb + , and Cs + ). Special emphasis has been placed on conformational binding selectivity, and on the structural characterization of the complexes. Li + and Na + cations are located in the calix[4]arene lower rim. The larger cations (K + , Rb + , and Cs + ) complex preferentially with the calix[4]arene cone conformer, and their endo (inclusive) complexation is driven by cation- ~ interactions, leading in the case of K + to a structure that reflects a preferential interaction with two phenol rings. The endo complexation of Cs + with calix[4]arene is in agreement with X-ray diffraction data.     

A joint experimental and theoretical study of cation-pi interactions: multiple-decker sandwich complexes of ferrocene with alkali metal ions (Li+, Na+, K+, Rb+, Cs+)

A systematic study of cation-pi interactions between alkali metal ions and the cyclopentadienyl ring of ferrocene is presented. The alkali metal (Li+, Na+, K+, Rb+, Cs+) salts of the ditopic mono(pyrazol-1-yl)borate ligand [1,1'-fc(BMe2pz)2]2- crystallize from dimethoxyethane as multiple-decker sandwich complexes with the M+ ions bound to the pi faces of the ferrocene cyclopentadienyl rings in an eta5 manner (fc = (C5H4)2Fe; pz = pyrazolyl). X-ray crystallography of the lithium complex reveals discrete trimetallic entities with each lithium ion being coordinated by only one cyclopentadienyl ring. The sodium salt forms polyanionic zigzag chains where each Na+ ion bridges the cyclopentadienyl rings of two ferrocene moieties. Linear columns [-CpR-Fe-CpR-M+-CpR-Fe-CpR-M+-](infinity) (R = [-BMe2pz]-) are established by the K+, Rb+, and Cs+ derivatives in the solid state. According to DFT calculations, the binding enthalpies of M+-eta5(ferrocene) model complexes are about 20% higher as compared to the corresponding M+-eta6(benzene) aggregates when M+ = Li+ or Na+. For K+ and Rb+, the degree of cation-pi interaction with both aromatics is about the same. The binding sequence along the M+-eta5(ferrocene) series follows a classical electrostatic trend with the smaller ions being more tightly bound.     

Selectivity of bis(calix[4]diquinone) ionophores towards metal ions in solvent dimethylsulfoxide: a molecular mechanics and molecular dynamics study

Molecular modelling studies have been carried out on two bis(calix[4]diquinone) ionophores, each created from two (calix[4]diquinone)arenes bridged at their bottom rims via alkyl chains (CH(2))(n), 1: n = 3, 2; n = 4, in order to understand the reported selectivity of these ligands towards different sized metal ions such as Na(+), K(+), Rb(+), and Cs(+) in dmso solution. Conformational analyses have been carried out which show that in the lowest energy conformations of the two macrocycles, the individual calix[4]diquinones exhibit a combination of partial cone, 1,3-alternate and cone conformations. The interactions of these alkali metals with the macrocycles have been studied in the gas phase and in a periodic box of solvent dmso by molecular mechanics and molecular dynamics calculations. Molecular mechanics calculations have been carried out on the mode of entry of the ions into the macrocycles and suggest that this is likely to occur from the side of the central cavity, rather than through the main axis of the calix[4]diquinones. There are energy barriers of ca. 19 kcal mol(-1) for this entry path in the gas phase, but in solution no energy barrier is found. Molecular dynamics simulations show that in both 1 and 2, though particularly in the latter macrocycle, one or two solvent molecules are bonded to the metal throughout the course of the simulation, often to the exclusion of one or more of the ether oxygen atoms. By contrast the carbonyl oxygen atoms remain bonded to the metal atoms throughout with bond lengths that remain significantly less than those to the ether oxygen atoms. Free energy perturbation studies have been carried out in dmso and indicate that for 1, the selectivity follows the order Rb(+) approximately K(+) > Cs(+) > Na(+), which is partially in agreement with the experimental results. The energy differences are small and indeed the ratio between stability constants found for Cs(+) and K(+) complexes is only 0.60, showing that has only a slight preference for K(+). For the larger receptor , which is better suited to metal complexation, the binding affinity follows the pattern Cs(+) > Rb(+) > K(+) > Na(+), with energy differences of 5.75, 2.61, 2.78 kcal mol(-1) which is perfectly consistent with experimental results.     

Non-covalent interactions of alkali metal cations with singly charged tryptic peptides

The complexes formed by alkali metal cations (Cat(+) = Li(+), Na(+), K(+), Rb(+)) and singly charged tryptic peptides were investigated by combining results from the low-energy collision-induced dissociation (CID) and ion mobility experiments with molecular dynamics and density functional theory calculations. The structure and reactivity of [M + H + Cat](2+) tryptic peptides is greatly influenced by charge repulsion as well as the ability of the peptide to solvate charge points. Charge separation between fragment ions occurs upon dissociation, i.e. b ions tend to be alkali metal cationised while y ions are protonated, suggesting the location of the cation towards the peptide N-terminus. The low-energy dissociation channels were found to be strongly dependant on the cation size. Complexes containing smaller cations (Li(+) or Na(+)) dissociate predominantly by sequence-specific cleavages, whereas the main process for complexes containing larger cations (Rb(+)) is cation expulsion and formation of [M + H](+). The obtained structural data might suggest a relationship between the peptide primary structure and the nature of the cation coordination shell. Peptides with a significant number of side chain carbonyl oxygens provide good charge solvation without the need for involving peptide bond carbonyl groups and thus forming a tight globular structure. However, due to the lack of the conformational flexibility which would allow effective solvation of both charges (the cation and the proton) peptides with seven or less amino acids are unable to form sufficiently abundant [M + H + Cat](2+) ion. Finally, the fact that [M + H + Cat](2+) peptides dissociate similarly as [M + H](+) (via sequence-specific cleavages, however, with the additional formation of alkali metal cationised b ions) offers a way for generating the low-energy CID spectra of 'singly charged' tryptic peptides.     

Synthesis, aggregation, and binding behavior of synthetic amphiphilic receptors

Amphiphilic bowl-shaped receptor molecules have been synthesized starting from diphenylglycoluril. Upon dispersion in water, these molecules self-assemble to form vesicles that bind neutral guests and alkali metal ions. In the case of bis(alkylester)-modified receptor compound 4, electron microscopy reveals that an increase in the size of the alkali metal ion (from Na(+) or K(+) to Rb(+) and to Cs(+)) leads to a change in the shape of the aggregates, viz. from vesicles to tubules. Monolayer experiments suggest that this behavior is due to a change in the conformation of this amphiphilic receptor. In water, molecules of 4 have an elongated conformation that changes to a sandwich-like one upon binding of alkali metal ions. Binding studies with vesicles from the bis-ammonium receptors 6 and 9 and the guest 4-(4-nitrophenylazo)resorcinol (Magneson) reveal that below the critical aggregation concentration (CAC) of the amphiphile 1:1 host-guest complexes are formed with high host-guest association constants. Above the CAC, a host-guest ratio of 2:1 was observed that indicates that only the cavities on the outside of the vesicle can be occupied. In the case of the naphthalene walled compound 8 changes in the vesicle structure are induced by the organic guest Magneson.     

Theoretical and gas-phase studies of specific cationized purine base quartet

Guanine tetraplexes are biological non-covalent systems stabilized by alkali cations. Thus, self-clustering of guanine, xanthine and hypoxanthine with alkali cations (Na(+), K(+) and Li(+)) is investigated by electrospray ionization mass spectrometry (ESI-MS) in order to provide new insights into G-quartets, hydrogen-bonded complexes. ESI assays displayed magic numbers of tetramer adducts with Na(+), Li(+) and K(+), not only for guanine, but also for xanthine bases. The optimized structures of guanine and xanthine quartets have been determined by B3LYP hybrid density functional theory calculations. Complexes of metal ions with quartets are classified into different structure types. The optimized structures obtained for each quartet explain the gas-phase results. The gas-phase binding sequence between the monovalent cations and the xanthine quartet follows the order Li(+) > Na(+) > K(+), which is consistent with that obtained for the guanine quartet in the literature. The smallest stabilization energy of K(+) and its position versus the other alkali metal ions in guanine and xanthine quartets is consistent with the fact that the potassium cation can be located between two guanine or xanthine quartets, for providing a [gua(or (xan))(8)+K](+) octamer adduct. Even if an abundant octamer adduct with K(+) for xanthine was detected by ESI-MS, it was not the case for guanine.     

Dipole effects on cation-pi interactions: absolute bond dissociation energies of complexes of alkali metal cations to N-methylaniline and N,N-dimethylaniline

Threshold collision-induced dissociation of M (+)( nMA) x with Xe is studied using guided ion beam mass spectrometry, where nMA = N-methylaniline and N, N-dimethylaniline and x = 1 and 2. M (+) includes the following alkali metal cations: Li (+), Na (+), K (+), Rb (+), and Cs (+). In all cases, the primary dissociation pathway corresponds to the endothermic loss of an intact nMA ligand. The primary cross section thresholds are interpreted to yield 0 and 298 K bond dissociation energies (BDEs) for ( nMA) x-1 M (+)-( nMA) after accounting for the effects of multiple ion-neutral collisions, the internal and kinetic energy distributions of the reactants, and the dissociation lifetimes. Density functional theory calculations at the B3LYP/6-31G* level of theory are used to determine the structures of these complexes, which are also used in single-point calculations at the MP2(full)/6-311+G(2d,2p) level to determine theoretical BDEs. The results of these studies are compared to previous studies of the analogous M (+)(aniline) x complexes to examine the effects of methylation of the amino group on the binding interactions. Comparisons are also made to a wide variety of cation-pi complexes previously studied to elucidate the contributions that ion-dipole, ion-induced-dipole, and ion-quadrupole interactions make to the overall binding.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Poly(ethylene glycol) doubly and singly cationized by different alkali metal ions: Relative cation affinities and cation-dependent resolution in a quadrupole ion trap mass spectrometer

Structural information of gas phase complexes of poly(ethylene glycol) (PEG) cationized by one or two different alkali metal ions is inferred from MS and MS/MS experiments performed with an electrospray quadrupole ion trap mass spectrometer. The rationale for selecting PEG was that its sites for cation binding are non-selective with respect to the repeating monomeric unit of the polymer, but there is selectivity with respect to the formation of an inner coordination sphere specific to each metal ion. The dissociation of [M1+ M2+ (EO23)], where EO23 = linear polymer of ethylene oxide, 23 units in length, resulted in loss of one of the alkali metal ions, with preference for loss of the larger cation, with no fragmentation of the PEG backbone for Na, K, Rb, and Cs. Li was not examined in this portion of the study. The selectivity for loss of the larger alkali metal ion was [Na+ K+ (EO23)] to [Na+ (EO23)] + K+ at 100%; [K+ Rb+ (EO23)] to [K+ (EO23)] + Rb+ at 93%; and [Rb+ Cs+ (EO23)] to [Rb+ (Eo23)] + Cs+ at 99%. The resolution of [M+ (EOx)] for x = 20-30 was dependent on the alkali metal ion, with the highest resolution observed for Cs+ and the lowest for Na+. These results are discussed with respect to the packing of the oxygen atoms on PEG (M.W.(avg) = 1000) around an alkali metal ion of different radius, and how this packing leads to an ensemble of unique structures, and therefore mobilities for [M+ (EOx)].     

A new fluorescent calix crown ether: synthesis and complex formation with alkali metal ions

We synthesised a new N-benzylaza-21-crown-7 ether 5 with a dihydroxy coumarin as a fluorescence sensor and investigated the binding behaviour towards alkali metal cations in methanol by fluorescence titrations. The association constants are within one order of magnitude, with the exception of sodium. Potassium is the preferred binding partner (K(Na)=330 M(-1); K(K)=8600 M(-1); K(Rb)=8200 M(-1); K(Cs)=4400 M(-1)). The corresponding aza-21-crown-7 ether (6) was attached by a methylene unit to a resorcarene to give fluorescent calix crown ether 12. The binding abilities of the calix crown ether towards alkali metal ions in methanol have also been investigated, and an increasing complex stability, distinct for potassium and rubidium in comparison with 5, was found: K(Na)=440 M(-1); K(K)=110,000 M(-1); K(Rb)=63,000 M(-1); K(Cs)=20,000 M(-1). Like bis(crown ether)s, a cooperative complexation of the crown ether and the cavitand scaffold can be assumed. The proposed complex geometry is supported by Kohn-Sham DFT calculations for the potassium and caesium complexes.     

气相中碱金属离子与丝氨酸、亮氨酸和赖氨酸五肽复合物的裂解反应简

为了探索金属离子对含有不同侧链的多肽气相解离的影响,采用质谱法研究了碱金属离子Li+,Na+,K+,Rb+和Cs+分别与丝氨酸、亮氨酸和赖氨酸五肽(分别简写为S5,L5和K5)形成的复合物的裂解反应. 质谱定性结果表明,5种碱金属离子均可以在气相中与丝氨酸、亮氨酸和赖氨酸五肽形成配合比为1：1 和2：1的非共价复合物;竞争反应结果表明,随着碱金属离子半径的增加,它们与3种五肽的结合能力逐渐减弱. 质谱定量结果表明,K+与丝氨酸、亮氨酸和赖氨酸五肽复合物的结合常数分别为8.94×104,2.83×104和2.50×103 L/mol,表明K+与五肽复合物的结合强度按照丝氨酸、亮氨酸和赖氨酸的顺序依次减小. 含不同侧链碱金属离子-五肽复合物的碰撞诱导解离结果表明,复合物的碎裂主要发生在骨架上,丝氨酸五肽复合物最易碎裂,亮氨酸五肽复合物其次,赖氨酸五肽复合物则较难碎裂,且3种复合物的侧链断裂情况也呈现明显差异. 此外,研究了Na+与亮氨酸五肽复合物所产生的碎片离子,分析了不同离子之间的来源关系,并以Dunbar的复合物理论模型为依据,推测在碎裂过程中,碱金属离子可能向五肽的碳端或氮端偏移. 质谱碎片分析结果表明,在2：1的非共价复合物中,第一个碱金属离子与五肽上4个酰胺键的羰基结合,第二个碱金属离子与五肽的羧基氧原子结合.