Microwave synthesis of supported Au and Pd nanoparticle catalysts for CO oxidation

We report the microwave synthesis and characterization of Au and Pd nanoparticle catalysts supported on CeO2, CuO, and ZnO nanoparticles for CO oxidation. The results indicate that supported Au/CeO2 catalysts exhibit excellent activity for low-temperature CO oxidation. The Pd/CeO2 catalyst shows a uniform dispersion of Pd nanoparticles with a narrow size distribution within the ceria support. A remarkable enhancement of the catalytic activity is observed and directly correlated with the change in the morphology of the supported catalyst and the efficient dispersion of the active metal on the support achieved by using capping agents during the microwave synthesis. The significance of the current method lies mainly in its simplicity, flexibility, and the control of the different factors that determine the activity of the nanoparticle catalysts.     

Size and support effects for CO oxidation on supported Pd catalysts

Science China Chemistry - Supporting Pd catalysts characterized significant different size distribution were obtained using PdCl2, [Pd(NH3)4](NO3)2 and Pd(acac)2 as precursors. High-resolution...     

SBA-16负载金属氧化物催化剂合成、表征及催化CO氧化反应活性

将V2O5, CeO2和CuO分散到提取自稻米壳的SBA-16上,考察了其催化CO氧化反应活性,并采用X射线衍射、扫描电镜、透射电镜、程序升温还原和紫外漫反射光谱对所制催化剂进行了表征。结果表明,掺杂CuO的介孔氧化硅是一种有前景的催化剂,其CO转化率可达98%以上。     

Cu-Co-Fe oxide catalysts supported on carbon nanotubes for the oxidation of CO

The catalytic activity and adsorption characteristics of the surface of catalysts in the form of carbon nanotubes produced on nickel and cobalt oxides with the Cu-Co-Fe oxide system as supported active phase were studied. At carbon nanotubes produced on nickel oxide with (10 + 10) wt.% of the catalytically active phase total conversion of CO to CO₂ is realized at 47 °C. This sample has high specific surface area and a large volume of mesopores. It was shown that the increase in catalytic activity correlates with the increase in the amount of the α₂ form of CO₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 222–226, July–August, 2006.     

The study of the active surface for CO oxidation over supported Pd catalysts

CO oxidation was investigated on various powder oxide supported Pd catalysts by temperature-programmed reaction.The pre-reduced catalysts show significantly higher activities than the pre-oxidized ones.Model studies were performed to better understand the oxidation state,reactivities and stabilities of partially oxidized Pd surfaces under CO oxidation reaction conditions using an in situ infrared reflection absorption spectrometer(IRAS).Three O/Pd(100)model surfaces,chemisorbed oxygen covered surface,surface oxide and bulk-like surface oxide,were prepared and characterized by low-energy electron diffraction(LEED)and Auger electron spectroscopy(AES).The present work demonstrates that the oxidized palladium surface is less active for CO oxidation than the metallic surface,and is unstable under the reaction conditions with sufficient CO.     

Synthesis of atomically ordered AuCu and AuCu(3) nanocrystals from bimetallic nanoparticle precursors

A new multistep approach was developed to synthesize atomically ordered intermetallic nanocrystals, using AuCu and AuCu(3) as model systems. Bimetallic nanoparticle aggregates are used as precursors to atomically ordered nanocrystals, both to precisely define the stoichiometry of the final product and to ensure that atomic-scale diffusion distances lower the reaction temperatures to prevent sintering. In a typical synthesis, PVP-stabilized Au-Cu nanoparticle aggregates synthesized by borohydride reduction are collected by centrifugation and annealed in powder form. At temperatures below 175 degrees C, diffusion of Cu into Au occurs, and the atomically disordered solid solution Cu(x)Au(1)(-)(x) exists. For AuCu, nucleation occurs by 200 degrees C, and atomically ordered AuCu exists between 200 and 400 degrees C. For AuCu(3), an AuCu intermediate nucleates at 200 degrees C, and further diffusion of Cu into the AuCu intermediate at 300 degrees C nucleates AuCu(3). Atomically ordered AuCu and AuCu(3) nanocrystals can be redispersed as discrete colloids in solution after annealing between 200 and 300 degrees C.     

双介孔硅基材料负载Pd催化剂上甲苯氧化性能的研究

催化氧化技术是挥发性有机物(VOCs)减排与控制的主流技术之一,其关键之处在于高效催化材料的研究与开发,负载型贵金属催化材料由于其低温下优越的VOCs催化氧化性能,受到国内外研究者的广泛关注.对于负载型催化剂而言,载体的性质直接影响活性相的分散,反应物和生成物的扩散与吸脱附,是影响负载型催化剂性能的主要因素.近年来,多级孔结构硅基材料由于具有多级的孔道结构、高比表面积和大的孔体积,逐渐成为VOCs催化氧化材料的研究热点.本文采用溶胶凝胶法和浸渍法制备了系列双介孔结构硅基材料负载Pd催化剂(Pd/BMS-x),通过控制合成过程中氨水的用量以调节催化剂的介孔结构分布. X射线衍射(XRD)结果表明,所合成的Pd/BMS-x催化剂在~2.0°的衍射峰,类似于MCM-41的(100)晶面衍射峰,表明所有的样品均具有有序的介孔结构. N2吸脱附实验表明所有样品的比表面积均高于1000m2/g,孔径分布表明Pd/BMS-30样品为单一介孔结构,而Pd/BMS-5~Pd/BMS-20样品具有2.64 nm以及18–45 nm范围内的双介孔结构,且Pd/BMS-15样品介孔分布较为集中. Pd/BMS-x催化剂上甲苯催化氧化性能测试表明,双介孔结构的Pd/BMS-5~Pd/BMS-20催化剂上甲苯催化氧化活性远高于单一介孔结构的Pd/BMS-30催化剂,表明载体结构对催化剂性能有重要影响.其中, Pd/BMS-15催化剂性能最佳(T90为228°C)且具有较强的稳定性,250°C条件下,反应持续60h催化剂未见明显失活. SEM和TEM结果表明, Pd/BMS-15催化剂中Pd高度分散于载体上,平均粒径在~3 nm左右.而Pd/BMS-30催化剂中Pd颗粒间有明显的团聚,平均粒径在8~17 nm之间.分散度测试表明,单一介孔结构的Pd/BMS-30催化剂, Pd分散度仅为27%,而双介孔结构Pd/BMS-5–Pd/BMS-20催化剂介于39%到69%,其中Pd/BMS-15催化剂中Pd分散度高达69%.与常规单一介孔MCM-41和MCM-48负载Pd催化剂相比,在低空速(42000 h–1)条件下, Pd/BMS-15催化剂上甲苯催化氧化性能与Pd/MCM-41和Pd/MCM-48催化剂相当.高空速(70000h–1)条件下, Pd/BMS-15催化剂的活性远高于单一介孔的Pd/MCM-41和Pd/MCM-48催化剂. Pd/BMS-15催化剂独特的双介孔结构,有利于活性相Pd的分散、反应物的扩散和传输,特别是在高空速条件下,有利于反应物与活性相的接触,提高了材料的氧化反应性能.进一步考察了材料的水热稳定性,将11 vol%的水蒸气引入到反应体系中,测试结果表明水蒸气的加入导致Pd/MCM-41和Pd/MCM-48催化剂的甲苯催化氧化性能显著下降,反应500 min后甲苯转化率分别从100%下降到76%和81%,而对于Pd/BMS-15催化剂,水蒸气的引入并未导致其活性明显下降,从而表明Pd/BMS-15催化材料具有较高的水热稳定性.     

Synthesis of vanadium-phosphorus oxide catalysts supported on pyrogenic silica and titanium dioxide

Various methods for the preparation of vanadium-phosphorus oxide (VPO) catalysts supported on aerosils A-300 and A-50 and TiO₂ were studied: a traditional method (in an organic solvent under varying the support addition time, the nature of the reducing agent, and the degree of reduction of vanadium oxide) and barothermal and mechanochemical syntheses. With the use of XRD analysis, it was found that the composition of the resulting VPO phase depends on the time of support addition to the synthesis and the temperature of thermal treatment. Conditions for the formation of a supported phase of VOHPO₄·0.5H₂O, the precursor of the active component (VO)₂P₂O₇, were determined. The presence of vanadium in an oxidation state of +4 was demonstrated using EPR and UV-VIS spectroscopy. The specific surface areas and pore structures of the synthesized catalysts were determined. The catalytic properties of samples in the reactions of n-butane oxidation in an excess of the hydrocarbon and oxidative ethane dehydrogenation were studied. It was found that, as compared with traditional bulk VPO catalysts, the use of the synthesized supported VPO catalysts made it possible to improve the process characteristics of n-butane oxidation and did not change these characteristics in the reaction of oxidative ethane dehydrogenation.     

Highly active mesostructured silica hosted silver catalysts for CO oxidation using the one-pot synthesis approach

A facile one-pot approach gave isolated silver nanoparticles anchored on a mesostructured silica matrix in a self-assembled way; these gave 100% CO conversion in CO oxidation at room temperature, which is higher than or comparable to the conversion obtained using noble metal catalysts.     

Synthesis and characterization of Pd catalysts supported on carbon microspheres for formic acid oxidation

A facile preparation of Pd catalyst using carbon microspheres as support was introduced in this paper. The carbon microspheres were prepared with a simple method from dextrose via hydrothermal process and used as catalysts support for formic acid electrooxidation. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analyses revealed that the as-prepared face-centered cubic crystal Pd nanoparticles were well-dispersed on the surface of the carbon microspheres, and the mean diameter of the nanoparticles was 8.8 nm. The effect of the support on the catalyst performance for formic acid electrooxidation was studied. The as-prepared catalyst showed the enhanced electrochemical surface active area and the higher electrocatalytic activity towards formic acid oxidation compared with Pd/CNTs and Pd/XC-72 catalysts prepared at room temperature. Electrochemical analysis suggested that the carbon microspheres might be good candidates to be used as the supports of catalyst for formic acid electrochemical oxidation.     

Alumina and silica oxides as catalysts for the oxidation of benzoins to benzils under solvent-free conditions

Alumina or silica gel are used as catalysts for a solvent-free oxidation of benzoins to the corresponding benzils. These catalysts are easily recovered after completion of the reactions, which are carried out either by heating in a sand bath or using microwave irradiation. Comparison of the results obtained with both catalysts indicates that all the reactants examined were oxidized faster on alumina than on silica under these conditions.     

pH-Sensitive gold nanoparticle catalysts for the aerobic oxidation of alcohols

Gold nanoparticles (NPs) stabilized by carboxylate modified polyvinylpyrrolidone have been prepared and fully characterized. The gold NPs efficiently catalyze the aerobic oxidation of benzyl alcohol in water at ambient temperature and are easily separated from the reaction mixture by lowering the pH of the solution, causing the NPs to precipitate. The mechanism of the precipitation process has been studied. Due to the efficiency of this process, the NPs may be reused as catalysts by readjusting their pH.     

Synthesis of hydrocarbons from CO and H2 on supported nickel-palladium catalysts

The use of an Ni-Pd/Al₂O₃ catalyst in the synthesis of C₁-C₄ hydrocarbons from CO and H₂ permits us to increase the selectivity and total yield of these products by a factor of 1.5–2.0 relative to the corresponding nickel and palladium catalysts. The optimal temperatures and CO/H₂ ratios for obtaining hydrocarbons were determined. A structure was proposed for the active sites of the bimetallic catalyst.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1689–1691, July, 1991.     

An influence of pretreatment conditions on surface structure and reactivity of Pt(100) towards CO oxidation reaction

We present a combined electrochemical and in situ STM study of the surface structure of Pt(100) single crystal electrodes in dependence on the cooling atmosphere after flame annealing. The following cooling conditions were applied: Ar/H₂ and Ar/CO mixtures (reductive atmosphere), argon (inert gas) and air (oxidative atmosphere). Surface characterization by in-situ STM allows deriving direct correlations between surface structure and macroscopic electrochemical behavior of the respective platinum electrodes. We investigated the influence of defect type and density as well as long range surface order on the kinetics of the CO electro-oxidation reaction. The defect-rich Pt(100) electrodes as cooled in air or Ar, and followed by immersion in the hydrogen adsorption region display higher activities as compared to the rather smooth Pt(100)-(1 × 1) electrode cooled in an Ar/H₂-atmosphere.     

Cobalt catalysts supported on silica nanotubes for Fischer-Tropsch synthesis

Silica nanotubes(SNT) have been synthesized using carbon nanotubes(CNT) as a template.Silica-coated carbon nanotubes(SNT-CNT) and SNT were loaded with a cobalt catalyst for use in Fischer-Tropsch synthesis(FTS).The catalysts were prepared by incipient wetness impregnation and characterized by N2 physisorption,X-ray diffraction(XRD),hydrogen temperature programmed reduction(H2-TPR) and transmission electron microscopy(TEM).FTS performance was evaluated in a fixed-bed reactor at 493 K and 1.0 MPa.Co/CNT and Co/SNT catalysts showed higher activity than Co/SNT-CNT in FTS because of the smaller cobalt particle size,higher dispersion and stronger reducibility.The results also showed that structure of the support affects the product selectivity in FTS.The synergistic effects of cobalt particle size,catalytic activity and diffusion limitations as a consequence of its small average pore size lead to medium selectivity to C5+ hydrocarbons and CH4 over Co/SNT-CNT.On the other hand,the Co/CNT showed higher CH4 selectivity and lower C5+ selectivity than Co/SNT,due to its smaller average pore size and cobalt particle size.     

硅纳米管负载的钌基催化剂费-托合成催化性能研究

以模板法合成的硅纳米管（SNT）为载体,用浆态浸渍法制备了钌基催化剂,采用氮气物理吸附、透射电子显微镜（TEM）、X射线粉末衍射（XRD）和氢气程序升温还原（H₂-TPR）等手段对其进行了表征。在固定床反应器上（503K,1.0MPa）考察了该催化剂的费-托合成反应活性及产物选择性,并与用商业二氧化硅为载体制备的催化剂上的反应结果进行了比较。结果表明,SNT和SiO₂负载的氧化钌在623K可被H₂完全还原;SNT负载的钌基催化剂上,钌氧化物颗粒较小、分散性好,还原后钌颗粒被较好地分散在硅纳米管上,且几乎所有的钌颗粒都分布在管内。与以SiO₂为载体的催化剂相比,以硅纳米管为载体的钌基催化剂具有较高的费-托合成活性。     

Pt-containing pillared clay catalysts for CO oxidation

Platinum has been introduced into pillared clay as a complex with the organosilicon amine N’-[3-(trimethoxysilyl)propyl]diethyltriamine, as a complex with the organosilicon amine and zirconyl chloride, as an ammine complex, and by impregnation with a chloroplatinic acid solution followed by hydrogen reduction. The catalytic activity of the Pt-containing clays in CO oxidation in excess hydrogen was also studied. The last procedure yields the most active Pt-containing pillared clay. Calcium has been introduced into pillared clay by ion exchange, and it was found that the catalytic activity of the clay decreases with increasing Ca content.     

Preparation and characterization of silica supported Au-Pd model catalysts

Au-Pd bimetallic model catalysts were synthesized as alloy clusters on SiO2 ultrathin films under ultrahigh vacuum (UHV) conditions. The surface composition and morphology were characterized with low energy ion scattering spectroscopy (LEIS), infrared reflection absorption spectroscopy (IRAS), and temperature programmed desorption (TPD). Relative to the bulk, the surface of the clusters is enriched in Au. With CO as a probe, IRAS and TPD were used to identify isolated Pd sites at the surface of the supported Au-Pd clusters. Ethylene adsorption and dehydrogenation show a clear structure-reactivity correlation with respect to the structure/composition of these Au-Pd model catalysts.