Thermal stability of an explosive detonator

Mercuric 5-nitrotetrazole is a possible replacement for lead azide. The thermal decomposition peak maximum ranged from 185 to 270°C as the heating rate increased from 0.1 to 100°C min⁻¹. The activation energy and frequency factor for thermal decomposition were determined from dynamic and isothermal DSC and isothermal TG data; the average values were 38.8 kcal mol⁻¹ and 3.56×10¹⁴ s⁻¹. A half-life experiment confirmed the kinetic constants and indicated that the decomposition reaction was first order. The heat of explosion was determined by a pressure DSC test and found to be 2587 J g⁻¹. The linear coefficient of expansion was 37±2×10⁻⁶°C⁻¹ from −60 to 160°C and indicated secondary transitions near −10 and 90°C. The specific heat was 0.0003154T+0.1339 in the region −40–90°C. The critical temperature for a slab with a half-thickness of 0.035 cm was calculated to be 232 °C.     

Effect of carrier substance concentration and pH on32P measurement instability in a scintillation solution

We have investigated the effect of the carrier substance concentration and of pH on the measurement instability of³²P labelled samples in a dioxane—based scintillation solution during gradual changes of measurement geometry caused by adsorption of the measured substance on counting vial walls. The intervals of the carrier concentration and of pH of measured samples, insuring negligible measurement instability without diminishing the counting efficiency, were determined.     

Effects of an adsorbed substance on line shape in magnetic resonance

An adsorbed monolayer is considered as an ideal two-dimensional gas whose molecules are in forward Brownian motion; the correlation functions are calculated for the local magnetic fields, together with the line shape in magnetic resonance. This last differs from that for a bulk specimen in shape and width. The experimental evidence is discussed.     

Detecting a peroxide-based explosive via molecular gelation

A convenient and portable triacetone triperoxide (TATP) sensor was developed utilizing a thiol-to-disulfide oxidation to trigger a solution-to-gel phase transition. Using this method, TATP can be detected visually without any instrumentation.     

Microstructuring of a polymer globule in solution in the presence of an amphiphilic substance

Microstructuring in the bulk of a polymer globule in a solution that contains dimeric amphiphilic molecules, in particular, surfactants, is studied in terms of the weak-segregation theory. An inhomogeneous structure can result from a decrease in free energy with the orientation of amphiphilic molecules in the region of inhomogeneity owing to the interaction of hydrophobic and polar parts of the molecules with the solvent. For the sake of simplicity, we discuss the case of identical second virial coefficients of the interaction of monomer units and amphiphilic molecules with different energies of interaction of the hydrophobic and polar parts of the molecule with the solvent. By comparing the free energy for different types of microstructures, we predict that, with deterioration in the quality of the solvent, there is an initial formation of a homogeneous globule followed by formation of a body-centered cubic structure; a hexagonal cylindrical structure; and, finally, a lamellar structure. For a low degree of amphiphilicity, the transition from a homogeneous globule to only a lamellar structure occurs. An increase in the concentration of the amphiphilic substance in the surrounding solution hinders the formation of a globule but facilitates its microstructuring, which is also promoted by an increase in the volume of the amphiphilic molecule and the difference in the interaction energies of its hydrophobic and polar parts with the solvent. Phase diagrams of a globule??s state at different values of model parameters are plotted.     

Thermal desorption and vapor transport characteristics in an explosive trace detector

Swipe-based explosive trace detectors rely on thermal desorption to vaporize explosive particles collected on a swipe. The vaporized material is carried by air flows from the desorption unit to the inlet of the chemical analyzer, typically an ion mobility spectrometer. We have observed that the amount of explosives detected from a swipe varies with the physical location of explosives collected on the swipe. There are two issues that may contribute to this effect: inhomogeneous or insufficient heating of the swipe during desorption and low velocity air flows that inefficiently transport desorbed vapor during the instruments analysis time. To better characterize this effect, we have simulated the air movements within a generic desorption unit using commercially available computational fluid dynamics software. Simulations are three dimensional, symmetric and solved under steady, laminar flow conditions. The calculated velocity field correlates directly with experimental detector response to the high explosive RDX. Results suggest that the limiting factor in this model thermal desorption unit is the flow-field around the swipe and flow rate into the detector, rather than heat transfer to the swipe itself. Buoyancy effects due to heating dominate the flow-field and produce a vertical bulk fluid motion within the domain that opposes much of the flow drawn into the analyzer.     

Identification of an isomer impurity in piperaquine drug substance

A significant contaminant of the antimalarial drug piperaquine (1,3-bis-[4-(7-chloroquinolyl-4)-piperazinyl-1]propane) has been identified using liquid chromatography-mass spectrometry (LC-MS) and 2D NMR spectroscopy (1H-1H COSY, 1H-13C HSQC, 1H-13C HMBC). The impurity was identified as the positional isomer 1-[(5-chloroquinolin-4)-piperazinyl]-3-[(7-chloroquinolin-4)-piperazinyl]propane. The impurity is formed because of contamination of batches of 4,7-dichloroquinoline (a precursor in the synthesis of piperaquine) with 4,5-dichloroquinoline. The amount of impurity (peak area impurity/peak area piperaquine using LC-UV at 347 nm) in old batches of piperaquine and in Artekin (the combination of dihydroartemisinin-piperaquine) ranged from 1.5 to 5%.     

Sensing mechanism elucidation of a chemosensor based on a metal-organic framework selective to explosive aromatic compounds

Theoretical elucidation of the turn-off mechanism of the luminescence of a chemosensor based on a metal-organic framework (MOF) [Zn₂(OBA)₄(BYP)₂] (BYP: 4,4′-bipyridine; H₂OBA: 4,4′-oxybis[benzoic acid]), selective to nitrobenzene (NB) via quantum chemical computations, is presented. The electronic structure and optical properties of Zn-MOF were investigated through the combination of density functional theory (DFT) and time-dependent DFT methods. Our results indicate that the fluorescence emission is governed by a linker (BPY)-to-linker (OBA) charge transfer (LLCT) involving orbitals π-type. Next, the interaction with the analyte was analyzed, where very interesting results were obtained, that is, the lowest unoccupied molecular orbital is now composed of orbitals from NB, which changes the emissive state of the Zn-MOF. This suggests that the LLCT process is blocked, inducing the fluorescence quenching. Otherwise, the Morokuma-Ziegler energy decomposition and natural orbitals for chemical valence on the Zn-MOF-NB interactions were studied in detail, which illustrate the possible channels of charge transfer between Zn-MOF and NB. Finally, we believe that this proposed methodology can be applied to different chemosensor-analyte systems to evidence the molecular and electronic factors that govern the sensing mechanisms.     

Cu(II) retention on a humic substance

Humic substances (HS) are macromolecular products derived from a physical, chemical, and microbiological process called "humification." These substances play an important role in the mobility and bioavailability of nutrients and contaminants in the environment. Adsorption isotherms provide a macroscopic view of the retention phenomena. However, complementary techniques are needed in order to study the retention mechanism. The application of the classical models and some modern ones, based on humic substances chemistry, do not accurately describe these adsorption data. The aim of this paper is to model isotherms and combine adsorption data with spectroscopy and microscopy techniques to study the Cu(II) retention on a HS. The adsorption isotherms shape varies significantly with the solution pH from L-type (pH 2-6) to S-type (pH 8). FTIR shows that, when pH is 2 the retention of Cu(II), as [Cu(H(2)O)(6)](2+), is the preferred retention mechanism. The quantity of Cu(II) retained as [Cu(OH)(H(2)O)(6)](+) rises, as pH increases. At pH 4, Cu(II) begins to precipitate, which is the preferred mechanism at pH 8.02. The presence of HS has a great influence on the precipitation process of Cu(II), giving rise to amorphous precipitates. As it is shown by SEM-XRF, Cu(II) distributes heterogeneously on HS surface and accumulates on the humic phases. The presence of different anions (chloride and nitrate) slightly modifies the HS behavior as cation exchanger. When Cl(-) ions are present, part of the Cu(II) form [CuCl(4)](2-), which is stable in solution due to its negative charge; when the anion present is NO(3)(-) the formed complex, [CuNO(3)](+), is retained on the HS.     

Calculation of the breakthrough time of an organic substance through a fixed layer of active carbon

The results of investigations of the adsorption dynamics of organic substances on active carbons (AC) moistened to equilibrium over a wide range of breakthrough concentrations are discussed. The features of adsorption dynamics typical for the moisture-free AC in the region of low breakthrough concentrations are also present when they are moistened to equilibrium. The equations for calculating the breakthrough time of low concentrations through a fixed layer of equilibrium moistened AC corresponding to the maximum permissible concentrations are derived.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 62–66, January, 1995.     

Enzyme immunoassay of a substance P-like immunoreactive substance in human plasma and saliva.

A sensitive and specific double-antibody enzyme immunoassay (EIA) for a substance P (SP)-like immunoreactive substance (SP-IS) was developed. For competitive reactions, the SP-antibody was incubated with SP standard (or sample) and beta-D-galactosidase labeled Tyr8-SP (delayed addition). Free and antibody-bound enzyme hapten were separated by using an anti-rabbit immunoglobulin G coated immunoplate. Activity of the enzyme on the plate was fluorometrically determined. The present immunoassay allows detection of 0.4 to 10 fmol/well of SP. Using the present EIA, SP-ISs in human saliva and plasma were determined. The level of SP-IS in human saliva was about 7 pmol/l, which was almost three times higher than that in human plasma.     

Urea nitrate, an exceptionally easy-to-make improvised explosive: studies towards trace characterization

Urea nitrate is a powerful improvised explosive, frequently used by terrorists in the Israeli arena. It was also used in the first World Trade Center bombing in New York in February 1993. It is difficult to identify urea nitrate in post-explosion debris, since only a very small fraction survives the blast. Also, in the presence of water, it readily decomposes to its original components, urea and nitric acid. It is suspected that post-blast debris of urea nitrate can be confused with ammonium nitrate, the main solid product of urea nitrate thermal decomposition. In a comprehensive study towards identification of urea nitrate in post-blast traces, a spectrophotometric technique for quantitative determination of urea nitrate was developed, and conditions were found for extraction and separation of un-exploded traces of urea nitrate with minimal decomposition. Nevertheless, out of 28 samples collected from a series of three controlled firings of urea nitrate charges, only one gave the typical adduct ion by liquid chromatography/mass spectrometry analysis. We found that urea nitrate can be extracted from solid mixtures to organic solvents by using Crown ethers as “host compounds.” The adducts thus formed are solid, crystalline compounds that can be characterized by microanalysis and spectroscopic techniques. Figure Adduct formation between urea nitrate and 18-crown-6     

无机炸药爆炸残留物检测方法的研究进展

对常用的无机炸药爆炸残留物检测方法:离子色谱法、拉曼光谱法、毛细管电泳法、扫描电镜能谱法等方法进行了综述,分析了各种检测方法的应用特点,并针对当前法庭科学领域的应用需求,提出了无机炸药爆炸残留物检测方法的主要研究方向,旨在为无机炸药爆炸残留物的研究和侦查办案提供参考.     

Crystallization of an amorphous substance as the result of cis-trans photoisomerization

Russian Chemical Bulletin -     

Investigation on probing explosive nitroaromatic compound vapors using graphyne nanosheet: a first-principle study

Structural Chemistry - We studied the geometric stability of pristine graphyne nanosheet (Gpn-NS) and electronic properties for the possible use of graphyne sheet for the chemical sensor. The...