New 2,6‐Distyryl‐Substituted BODIPY Isomers: Synthesis,Photophysical Properties,and Theoretical Calculations

A 2,6‐distyryl‐substituted boradiazaindacene (BODIPY) dye and a new series of 2,6‐p‐dimethylaminostyrene isomers containing both α‐ and β‐position styryl substituents were synthesized by reacting styrene and p‐dimethylaminostyrene with an electron‐rich diiodo‐BODIPY. The dyes were characterized by X‐ray crystallography and NMR spectroscopy and their photophysical properties were investigated and analyzed by carrying out a series of theoretical calculations. The absorption spectra contain markedly redshifted absorbance bands due to conjugation between the styryl moieties and the main BODIPY fluorophore. Very low fluorescence quantum yields and significant Stokes shifts are observed for 2,6‐distyryl‐substituted BODIPYs, relative to analogous 3,5‐distyryl‐ and 1,7‐distyryl‐substituted BODIPYs. Although the fluorescence of the compound with β‐position styryl substituents on both pyrrole moieties and one with both β‐ and α‐position substituents was completely quenched, the compound with only α‐position substituents exhibits weak emission in polar solvents, but moderately intense emission with a quantum yield of 0.49 in hexane. Protonation studies have demonstrated that these 2,6‐p‐dimethylaminostyrene isomers can be used as sensors for changes in pH. Theoretical calculations provide strong evidence that styryl rotation and the formation of non‐emissive charge‐separated S₁ states play a pivotal role in shaping the fluorescence properties of these dyes. Molecular orbital theory is used as a conceptual framework to describe the electronic structures of the BODIPY core and an analysis of the angular nodal patterns provides a reasonable explanation for why the introduction of substituents at different positions on the BODIPY core has markedly differing effects.     

Hetero-Substituted αβ-Fused BODIPY

Here, we report the synthesis and properties of heterosubtituted αβ-fused BODIPY fluorophores. The compounds were obtained in good yields by sequential and selective Stille cross-coupling reactions from 2,3,5,6-tetrahalo-BODIPY, allowing the introduction of different substituents at the 3,5 and 2,6 positions of the BODIPY ring. The final fused compounds were synthesized using oxidative cyclisation with ferrous chloride. The fully fused compounds show a strong bathochromically shifted emission along with a hyperchromic shift of the absorption maxima. The fluorescence quantum yields remain relatively large for compounds emitting in this wavelength range. Computational studies have been carried out to fully understand the photophysical behaviour of these dyes.     

Quasi‐One‐Dimensional Electronic Systems Formed from Boron Dipyrromethene (BODIPY) Dyes

Synthetic strategies have been devised that allow the rational design and isolation of highly coloured boron dipyrromethene (BODIPY) dyes that absorb across much of the visible region. Each dye has an aryl polycycle (usually pyrene or perylene) connected to the central BODIPY core through a conjugated tether at the 3,5‐positions. Both mono‐ and difunctionalised derivatives are accessible, in certain cases containing both pyrene and perylene residues. For all new compounds, the photophysical properties have been recorded in solution at ambient temperature and in a glassy matrix at 77 K. The presence of the aryl polycycle(s) affects the absorption and emission maxima of the BODIPY nucleus, thereby confirming that these units are coupled electronically. Indeed, the band maxima and oscillator strengths depend on the conjugation length of the entire molecule, whereas there is no sign of fluorescence from the polycycle. As a consequence, the radiative rate constant tends to increase with each added appendage. The nature of the linkage (styryl, ethenyl, or ethynyl) also exerts an effect on the photophysical properties and, in particular, the absorption spectrum is perturbed in the region of the aryl polycycle. The perylene‐containing BODIPY derivatives absorb over a wide spectral range and emit in the far‐red region in almost quantitative yield. A notable exception to this generic behaviour is provided by the anthracenyl derivative, which exhibits charge‐transfer absorption and emission spectra in weakly polar media at ambient temperature. Regular BODIPY‐like behaviour is restored in a glassy matrix at 77 K. Overall, these new dyes represent an important addition to the range of strongly absorbing and emitting reagents that could be used as solar concentrators.     

The synthesis and the solvent and substituent effect on the spectroscopic characteristic of 3-ethyl-2-(p-substitued styryl)benzothiazolium iodides

The photophysical and photochemical properties of p-substitued 2-styryl-ethylbenzothiazolium iodides, possessing different electron-withdrawing or electron-donating groups are described. The dyes were prepared by the condensation of 3-ethyl-2-methylbenzothiazole salts with p-substituted benzaldehydes. The synthesis of suitable substrates is presented as well. We describe here the absorption, emission spectra and the luminescence quantum yield of hemicyanine dyes (SH) measured in 11 different organic solvents of varying polarity. Molecular structure of the synthesized dyes was established by (1)H NMR, electronic absorption and fluorescence spectrometry. The spectral data confirmed that all the compounds exist in E-configuration of their styryl residues. The planar molecular conformation is typical for the compounds with five-membered side aromatic moieties (for example benzothiazole). The compounds possessing N-alkyl substituent in phenyl ring, in contrast to the compounds with other substituents, exhibit low fluorescence quantum yield in THF solution. This indicates that for N-alkyl derivatives the non-radiative processes are much more effective than the radiative ones. The electronic absorption and fluorescence emission spectra of tested dyes demonstrate high sensitivity to the nature of substituent introduced into the aromatic ring.     

Regioselective synthesis of 5-monostyryl and 2-tetracyanobutadiene BODIPY dyes

Several unsymmetrically 2,5-disubstituted BODIPY dyes were obtained from 2-substituted derivatives (iodo, ethynylaryl) using a regioselective Knoevenagel condensation reaction with dimethylaminobenzaldehyde. The unsaturated, unsymmetrical 2-ethynyl-5-styryl-BODIPY undergoes a regioselective [2 + 2] cycloaddition reaction with tetracyanoethylene leading to the 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) derivative. This shows rich redox activity with two reversible oxidation and three reversible reduction waves at +0.72 V, +1.04 V; -0.32 V, -0.78 V, and -1.50 V, respectively.     

Near‐IR BODIPY Dyes à la Carte—Programmed Orthogonal Functionalization of Rationally Designed Building Blocks

Herein, we report the synthesis of polyfunctional BODIPY building blocks suitable to be subjected to several reaction sequences with complete chemoselectivity, thereby allowing the preparation of complex BODIPY derivatives in a versatile and programmable manner. The reactions included the Liebeskind–Srogl cross‐coupling reaction (LSCC), nucleophilic aromatic substitution (S_NAr), Suzuki, Sonogashira, and Stille couplings, and a desulfitative reduction of the MeS group. This novel synthetic protocol is a powerful route to design a library of compounds with tailored photophysical properties for advanced applications. In this context, it is noteworthy that it offers a straightforward and cost‐effective strategy to shift the BODIPY emission deep into the near‐infrared spectral region while retaining high fluorescence quantum yields as well as highly efficient and stable laser action. These new dyes outperform the lasing behaviour of dyes considered as benchmarks over the red spectral region, overcoming the important drawbacks associated with these commercial laser dyes, namely low absorption at the standard pump wavelengths (355 and 532 nm) and/or poor photostability.     

Synthesis of water-soluble, ring-substituted squaraine dyes and their evaluation as fluorescent probes and labels

A series of ring-substituted squaraines absorbing and emitting in the red and NIR spectral region was synthesized and their spectral and photophysical properties (quantum yields, fluorescence lifetimes) and photostabilities were measured and compared to Cy5, a commonly used fluorescent label. The absorption maxima in aqueous media were found to be between 628 and 667 nm and the emission maxima are between 642 and 685 nm. Squaraine dyes exhibit high extinction coefficients (163,000–265,000 M⁻¹ cm⁻¹) and lower quantum yields (2–7%) in aqueous buffer but high quantum yields (up to 45%) and long fluorescence lifetimes (up to 3.3 ns) in presence of BSA. Dicyanomethylene- and thio-substituted squaraines exhibit an additional absorption around 400 nm with extinction coefficients between 21,500 and 44,500 M⁻¹ cm⁻¹. These dyes are excitable not only with red but also with blue diode lasers or light emitting diodes. Due to the favourable spectral and photophysical properties these dyes can be used as fluorescent probes and labels for intensity- and fluorescence lifetime-based biomedical applications.     

Solvent-dependent photophysical properties of borondipyrromethene dyes in solution

Four fluorescent dyes derived from 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) with unusual substituents (chloro, methoxy, and malonate) at the 3,5-positions have been synthesized by a novel nucleophilic substitution reaction of 3,5-dichloroBODIPY. Their solvent-dependent photophysical properties have been investigated by means of UV/Vis absorption, steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity due to an increase in the rate of nonradiative deactivation. The fluorescence rate constants are in the (1.6–2.0) × 10⁸ s⁻¹ range. The borondipyrromethene derivatives show small Stokes shifts (between 440 and 490 cm⁻¹) and narrow absorption (FWHM between 710 and 820 cm⁻¹) and emission bands.     

Blue‐to‐Orange Color‐Tunable Laser Emission from Tailored Boron‐Dipyrromethene Dyes

A series of meso‐substituted boron‐bipyrromethene (BODIPY) dyes are synthesized and their laser and photophysical properties systematically studied. Laser emission covering a wide visible spectral region (from blue to orange) is obtained by just changing the electron donor character of the heteroatom at position 8. The additional presence of methyl groups at positions 3 and 5 results in dyes with a photostability similar to that of the unsubstituted dye but with much improved efficiency. Correlation of the lasing properties of the different dyes to their photophysical properties provides inklings to define synthetic strategies of new BODIPY dyes with enhanced efficiency and modulated wavelength emission over the visible spectral region.     

Conformationally restricted dipyrromethene boron difluoride (BODIPY) dyes: highly fluorescent, multicolored probes for cellular imaging

Novel fluorescent, conformationally restricted dipyrromethene boron difluoride (BODIPY) dyes have been prepared by introducing a naphthalenyl group at the meso position of the BODIPY core. These BODIPY dyes exhibit increased fluorescence quantum yields compared with dyes that have a meso-position phenyl group with internal rotation. The absorption and emission wavelengths of such conformationally restricted BODIPY dyes can be easily tuned to the near-IR range by derivatization through a condensation reaction with benzaldehyde derivatives. The two-photon absorption properties of these BODIPY dyes were also investigated and the results show that they exhibit increased two-photon excited fluorescence compared to analogue dyes that contain a phenyl group. The one- and two-photon fluorescence imaging of living cells by using selected BODIPY dyes has been successfully demonstrated.     

Structural modification of BODIPY: Improve its applicability

The synthesis of biocompatibility and tissue penetrating BODIPY dyes have been summarized.     

Structural modification of BODIPY: Improve its applicability

BODIPY has been considered a potential scaffold because of their neutral total charge, sharp absorption,and emission with high fluorescence quantum yield. However, the drawback of emission wavelength at less than 600 nm and hydrophobicity limit its application. One of the extremely interesting properties of BODIPY is that small modifications to their structures could be able to tune their properties, mainly including the absorption/emission wavelength and the hydrophilicity. This review focuses on the modification at different positions of BODIPY to improve the water-solubility and emission wavelength that describe their spectral, photophysical properties and applicability, which is helpful for the researchers to rationally design BODIPY dyes to adapt a wide range of applications.     

General route to symmetric and asymmetric meso-CF3-3(5)-aryl(hetaryl)- and 3,5-diaryl(dihetaryl)-BODIPY dyes

A general efficient route to hitherto inaccessible symmetric and asymmetric meso-CF(3)-BODIPY dyes has been developed. The key stages include the reduction of available 2-trifluoroacetylpyrroles to the corresponding alcohols which are further condensed with pyrroles. The method allows the BODIPY with 3(5)aryl(hetaryl) and 3,5-diaryl(hetaryl) substituents to be readily assembled. The BODIPY dyes synthesized fluoresce (Φ(f) = 0.56-1.00) in the 560-680 nm region.     

BODIPY-based hydroxyaryl derivatives as fluorescent pH probes

[structures: see text] Seven new 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dyes with phenolic or naphtholic subunits on position 8 and with substituents having different electron driving forces on positions 3 and 5 were synthesized. Their absorption and steady-state fluorescence properties were investigated as a function of solvent. The novel compounds, with the exception of 4,4-difluoro-8-(4-hydroxyphenyl)-3,5-bis-(4-methoxyphenyl)-4-bora-3a,4a-diaza-s-indacene, are characterized by absorption maxima in the range 493-515 nm and small (400-600 cm(-1)) Stokes shifts. The exceptional dye has absorption maxima in the 570-580 nm region and fluorescence emission maxima around 610-620 nm, depending on the solvent. In aqueous solution, the dyes show a large fluorescent enhancement upon increasing the acidity of the solution. They can be used in aqueous solution as fluorescent pH probes excitable with visible light, with pKa values ranging from 7.5 to 9.3, depending on the substitution pattern on positions 3, 5, and 8.     

Condensation of 2-(3,4-methylenedioxyphenyl)-5,6-benzolepidine methiodide with aromatic aldehydes

2-(3,4-Methylenedioxyphenyl)-5,6-benzolepidine methiodide enters into condensation with aromatic aldehydes in absolute alcohol in the presence of piperidine to give styryl dyes. The effect of various substituents in the styryl residue on the position of the absorption maxima of the dyes was studied.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 689–690, May, 1973.     

Synthesis, spectral, electrochemical, and anion binding properties of 3,5-bis(dipyrromethanyl) boron-dipyrromethenes

Four new boron-dipyrromethenes (BODIPYs) containing dipyrromethanyl substituents at 3,5-positions, bis(3,5-dipyrromethanyl) BODIPYs 5-8, were synthesized by treating their corresponding 3,5-diformyl BODIPYs 1-4 with excess pyrrole under mild acid catalyzed reaction conditions. The compounds 5-8 are stable and freely soluble in common organic solvents. One-dimensional, two-dimensional NMR, high resolution mass spectrometry (HRMS), absorption, fluorescence, and electrochemical techniques were used to characterize the compounds. The spectral and electrochemical studies indicated that dipyrromethanyl groups at 3,5-positions of BODIPY are less electron deficient compared to formyl groups at the same positions. The anion binding studies indicated that bis(3,5-dipyrromethanyl) BODIPY compounds containing four pyrrole NH groups showed preferential binding with F(-) ion over other anions, as confirmed by using NMR, fluorescence, and electrochemical studies.     

Charge‐Recombination Fluorescence from Push–Pull Electronic Systems Constructed around Amino‐Substituted Styryl–BODIPY Dyes

A small series of donor–acceptor molecular dyads has been synthesized and fully characterized. In each case, the acceptor is a dicyanovinyl unit and the donor is a boron dipyrromethene (BODIPY) dye equipped with a single styryl arm bearing a terminal amino group. In the absence of the acceptor, the BODIPY‐based dyes are strongly fluorescent in the far‐red region and the relaxed excited‐singlet states possess significant charge‐transfer character. As such, the emission maxima depend on both the solvent polarity and temperature. With the corresponding push–pull molecules, there is a low‐energy charge‐transfer state that can be observed by both absorption and emission spectroscopy. Here, charge‐recombination fluorescence is weak and decays over a few hundred picoseconds or so to recover the ground state. Overall, these results permit evaluation of the factors affecting the probability of charge‐recombination fluorescence in push–pull dyes. The photophysical studies are supported by cyclic voltammetry and DFT calculations.     

Synthesis and photophysical properties of poly(aryleneethynylene)s bearing dialkylsilyl side substituents

A series of poly(aryleneethynylene)s bearing dialkylsilyl (-SiR₂H) side substituents has been synthesized by Sonogashira cross-coupling reactions of 1,4-diethynyl-2,5-bis(dialkylsilyl)benzene and diiodoarylene compounds. Their photophysical properties in solution have been studied. All of the polymers showed intense fluorescence with high quantum yield. Compared with their analogues containing para-phenylene units, the polymers with meta-phenylene units in the main chain showed absorption and emission maxima at shorter wavelengths, whereas the polymers having thiophenylene units in their backbones showed bathochromically shifted spectra. For polymers having the same conjugated parent backbone, silyl substituents have been found to exert negligible effect on their photophysical properties.     

Crown-containing styryl dyes

New crown ether styryl dyes containing various heterocyclic moieties and substituents were synthesized. Thecis andtrans isomers of crown ether styryl dyes and their complexes with metal cations were characterized by their absorption and fluorescence spectra. Based on an analysis of the spectral parameters and the shifts of the absorption and fluorescence maxima upon photoisomerization and complexation, the effects of the nature and structure of the heterocyclic moiety on the photochromism of styryl ionophores were revealed.For Part 12, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 129–135, January, 1995.This study was financially supported by the Russian Foundation for Basic Research (Grants No. 94-03-08-531 and 93-03-04-089) and the International Science Foundation (Grant M8QOO).     

Combinatorial discovery of full-color-tunable emissive fluorescent probes using a single core skeleton, 1,2-dihydropyrrolo[3,4-beta]indolizin-3-one

We developed a novel fluorescent core skeleton, 1,2-dihydropyrrolo[3,4-beta]indolizin-3-one, by complexity-generating one-pot reactions through 1,3-dipolar cyclization followed by oxidative aromatization. This fluorescent core skeleton can accommodate various wavelengths of emission maxima by changing the electronic properties of substituents, which was postulated by computational studies. The full-color-tunable emission maxima were achieved with a single core skeleton by changing the substituents using the combinatorial approach. These novel fluorophores have excellent photophysical and photochemical properties: moderate to excellent quantum yields, resistance to the photobleaching, pH-independent fluorescence, large Stokes shifts, druglike lipophilicity for membrane permeability, etc. Further, we successfully demonstrated the bioapplication of fluorophores B1 and B5 in the immunofluorescence for visualizing cellular compartments of HeLa cells.