A study of NOX production in air heated by laser discharges: Effect of energy, wavelength, multiple discharges and pressure

An experimental study on the production of NO_X in air heated under the action of a concentrated laser beam is presented. In this experiment laser induced plasma was produced in air in a closed Teflon chamber of inner volume 1600 cm³ by focusing a laser beam with either the wavelength of 1064 or 532 nm from a Q-switched Nd:YAG laser. The NO_X production was measured by chemiluminescence method and the possible effect of wavelengths, multiple discharges, and pressure on the yield of NO_X was studied. The results show that within the studied plasma energy range of 26–253 mJ for 532 nm beam and 16–610 mJ for 1064 nm beam, the NO_X production scales linearly with the dissipated plasma energy. For a given energy, 532 nm beam produces more NO_X in air at atmospheric pressure than the 1064 nm beam. In an attempt to see the possible influence of multiple discharges on the production of NO_X, discharges were created using 2–8 pulses with a repetition rate of 10 pulses per second in stationary air at atmospheric pressure. The results indicate that a certain amount of the NO_X created by a given pulse is destroyed by the subsequent pulses. In order to study the pressure dependence of the NO_X production, the pressure was varied from 16 to 100 kPa in the chamber and it was found that the NO_X production efficiency scales linearly with pressure.     

Preparation and electrical properties of a pyrochlore-related Ce2Zr2O8−x phase

A pyrochlore-related Ce₂Zr₂O_8−x phase has been prepared in a reduction reoxidation process from Ce_0.5Zr_0.5O₂ powders. Ce₂Zr₂O_8−x, based on a cubic symmetry with a=1.053 nm, decomposes in nitrogen at 800 °C, but remains stable up to 900 °C in air. It shows mixed oxygen ionic and electronic conductivity. The bulk conductivity at 700 °C is 4×10⁻⁴ S cm⁻¹ in air and 1×10⁻² S cm⁻¹ in nitrogen, and the activation energy is 1.27 eV in air. In nitrogen, the Arrhenius law is not obeyed, and a curved plot was obtained from 400 to 700 °C; then, the conductivity decreased rapidly due to the thermal decomposition of Ce₂Zr₂O_8−x.     

Fourier Transform Spectroscopy of theYΣ–XΠiTransition of CuO

TheY²Σ⁺–X²Π_inear-infrared electronic transition of CuO was observed at high resolution for the first time. The spectrum was recorded with the Fourier transform spectrometer associated with the McMath–Pierce Solar Telescope at Kitt Peak. The excited CuO molecules were produced in a low pressure copper hollow cathode sputter with a slow flow of oxygen. Constants for theY²Σ⁺states of CuO are:T₀= 7715.47765(54) cm⁻¹,B= 0.4735780(28) cm⁻¹,D= 0.822(12) × 10⁻⁶cm⁻¹,H= 0.46(10) × 10⁻¹⁰cm⁻¹, γ = −0.089587(42) cm⁻¹, γ_D= 0.1272(79) × 10⁻⁶cm⁻¹,b_F= 0.12347(22) cm⁻¹, andc= 0.0550(74) cm⁻¹. ImprovedX²Π_iconstants are also presented.     

Quasi-simultaneous ultraviolet and infrared emission from a plasma cathode TEA laser

Quasi-simultaneous laser action in the UV (0.337 μm) and the IR (10.6 μm) was observed from a pulsed laser with a sliding discharge plasma cathode. The laser operates at atmospheric pressure, with a gas mixture of CO₂/N₂/He, at a 0.26/0.50/4.0 lmin⁻¹ flow rate. Output energies of 30 mJ in the IR and 0.35 mJ in the UV were obtained, from a laser discharge volume of 38.0×1.0×2.8 cm³. The optimum gas mixtures have been determined and the temporal behavior of the discharge parameters, the performance characteristics of the laser and the beam spatial distributions were investigated.     

Electrical conductivity of Ag/Na ion-exchanged titanosilicate glasses

The Ag₂O–TiO₂–SiO₂ glasses were prepared by Ag⁺/Na⁺ ion-exchange method from Na₂O–TiO₂–SiO₂ glasses at 380–450 °C below their glass transition temperatures (T_g), and their electrical conductivities were investigated as functions of TiO₂ content and the ion-exchange ratio (Ag/(Ag+Na)). In a series of glasses 20R₂O·xTiO₂·(80−x)SiO₂ with x=10, 20, 30 and 40 in mol%, the electrical conductivities at 200 °C of the fully ion-exchanged glasses of R=Ag were in the order of 10⁻⁵ or 10⁻⁴ S cm⁻¹ and were 1 or 2 orders of magnitude higher than those of the initial glasses of R=Na. The glass of x=30 exhibited the highest increase of conductivity from 3.8×10⁻⁷ to 1.3×10⁻⁴ S cm⁻¹ at 200 °C by Ag⁺/Na⁺ ion exchange among them. When the ion-exchange ratio was changed in 20R₂O·30TiO₂·50SiO₂ system, the electrical conductivity at 200 °C exhibited a minimum value of 7.6×10⁻⁸ S cm⁻¹ around Ag/(Ag+Na)=0.3 and increased steeply in the region of Ag/(Ag+Na)=0.5–1.0. When the ion-exchange temperature was changed from 450 to 400 °C, the conductivity of the ion-exchanged glass of x=30 decreased. The infrared spectroscopy measurement revealed that the ion-exchange temperature of 450 °C induced a structural change in the glass of x=30. The T_g of the fully ion-exchanged glass of x=30 was 498 °C. It was suggested that the incorporated silver ions changed the average coordination number of titanium ions to form higher ion-conducting pathway and resulted in high conductivity in the titanosilicate glasses.     

Metal/electrolyte surface chemistry: The adsorption of nitric acid and water on Ag(110)

The adsorption of HNO₃/H₂O mixtures on Ag(110) was investigated to learn more about the chemistry of the metal/electrolyte interface. The experiments were performed in ultrahigh vacuum (UHV) using thermal desorption spectroscopy (TDS), low energy electron diffraction (LEED), and electron stimulated desorption ion angular distribution (ESDIAD) over temperatures of 80–650 K and coverages of 0–10 monolayers (ML). As this is the first known study of HNO₃ in UHV, the mass spectrometer cracking pattern for HNO₃ is here reported. HNO₃ adsorbs irreversibly on the clean surface at 80 K and loses its acidic proton to form an adsorbed surface nitrate (NO₃) below 150 K. The saturation amount of adsorbed NO₃ is 0.4 ± 0.1 ML for which adsorption occurs in either a normal or split c(2 × 2) structure. N03 is stable on the surface up to 450 K beyond which it decomposes directly to gaseous NO₂ and NO and adsorbed atomic oxygen. NO₃ decomposition is first order with an activation energy E_a = 151±4 kJ mol⁻¹ and a pre-exponential factor of A = 10^15.4±0.4s⁻¹. NO₃ stabilizes adsorbed H₂O by about 8 kJ mol⁻¹ and is hydrated by as many as three H₂O molecules. Multilayers of HNO₃/H₂O desorb at 150–220 K and show evidence of extensive hydrogen bonding and hydration interactions. No evidence for HNO₃-induced corrosion or other surface damage was detected in any of these experiments.     

Rotational absorption spectrum of methylene fluoride in the 20–100 cm region

The pure rotational spectrum of CH₂F₂ was recorded in the 20–100 cm⁻¹ spectral range and analyzed to obtain rotation and centrifugal distortion constants. Analysis of the data yielded rotation constants: A = 1.6392173 ± 0.0000015, B = 0.3537342 ± 0.00000033, C = 0.3085387 ± 0.00000027, τ_aaaa = −(7.64 ± 0.46) × 10⁻⁵, τ_bbbb = −(2.076 ± 0.016) × 10⁻⁶, τ_cccc = −(9.29 ± 0.12) × 10⁻⁷, T₁ = (4.89 ± 0.20) × 10⁻⁶, and T₂ = −(1.281 ± 0.016) × 10⁻⁶cm⁻¹.     

On the rise of the proton structure function F2 towards low x

A measurement of the derivative (∂ lnF₂/∂ lnx)_Q²≡−λ(x,Q²) of the proton structure function F₂ is presented in the low x domain of deeply inelastic positron–proton scattering. For 5×10⁻⁵x0.01 and Q²1.5 GeV², λ(x,Q²) is found to be independent of x and to increase linearly with lnQ².     

Self-assembling of C and Sn in Ge

Self-assembling of isoelectronic C and Sn impurities in Ge is predicted. The formation of the 1C4Sn tetrahedral cells is thermodynamically profitable in Ge-rich C_xSn_yGe_1−x−y (4x<y) alloys in the ultra dilute C impurity limit with 1×10^-8x1×10^-3. The concentrations of Sn atoms when all C atoms are surrounded only by Sn atoms are estimated for the lower molecular beam epitaxy, intermediate annealing and higher bulk crystallization temperatures. The origin of this phenomenon is a considerable decrease of the strain energy after self-assembling. The same self-assembling in Si is thermodynamically non-profitable due to the large cohesive energy of Si–C chemical bonds.     

In-plane gate transistors in AlxGa1−xN/GaN heterostructures written by focused ion beams

Focused ion beam implantation of gallium and dysprosium was used to locally insulate the near-surface two-dimensional electron gas of Al_xGa_1−xN/GaN heterostructures. The threshold dose for insulation was determined to be 2×10¹⁰ cm⁻¹ for 90 keV Ga⁺ and 1×10⁹ cm⁻¹ for 200 keV Dy²⁺ at 4.2 K. This offers a tool not only for inter-device insulation but also for direct device fabrication. Making use of “open-T” like insulating line patterns, in-plane gate transistors have been fabricated by focused ion beam implantation. An exemplar with a geometrical channel width of 1.5 μm shows a conductance of 32 μS at 0 V gate voltage and a transconductance of around 4 μS, which is only slightly dependent on the gate voltage.     

Lithium ion conductive glass–ceramics with Li3Fe2(PO4)3 and YAG laser-induced local crystallization in lithium iron phosphate glasses

The glasses with the composition of 37.5Li₂O–(25 − x)Fe₂O₃–xNb₂O₅–37.5P₂O₅ (mol%) (x = 5,10,15) are prepared, and it is found that the addition of Nb₂O₅ is effective for the glass formation in the lithium iron phosphate system. The glass–ceramics consisting of Nasicon-type Li₃Fe₂(PO₄)₃ crystals with an orthorhombic structure are developed through conventional crystallization in an electric furnace, showing electrical conductivities of 3 × 10^− 6 Scm^− 1 at room temperature and the activation energies of 0.48 eV (x = 5) and 0.51 eV (x = 10) for Li⁺ ion conduction in the temperature range of 30–200 °C. A continuous wave Nd:YAG laser (wavelength: 1064 nm) with powers of 0.14–0.30 W and a scanning speed of 10 μm/s is irradiated onto the surface of the glasses, and the formation of Li₃Fe₂(PO₄)₃ crystals is confirmed from XRD analyses and micro-Raman scattering spectra. The crystallization of the precursor glasses is considered as new route for the fabrication of Li₃Fe₂(PO₄)₃ crystals being candidates for use as electrolyte materials in lithium ion secondary batteries.     

Effect of oxygen partial pressure on the structural and optical properties of dc reactive magnetron sputtered molybdenum oxide films

Molybdenum oxide films (MoO₃) were deposited on glass and crystalline silicon substrates by sputtering of molybdenum target under various oxygen partial pressures in the range 8 × 10⁻⁵–8 × 10⁻⁴ mbar and at a fixed substrate temperature of 473 K employing dc magnetron sputtering technique. The influence of oxygen partial pressure on the composition stoichiometry, chemical binding configuration, crystallographic structure and electrical and optical properties was systematically studied. X-ray photoelectron spectra of the films formed at 8 × 10⁻⁵ mbar showed the presence of Mo⁶⁺ and Mo⁵⁺ oxidation states of MoO₃ and MoO_3−x. The films deposited at oxygen partial pressure of 2 × 10⁻⁴ mbar showed Mo⁶⁺ oxidation state indicating the films were nearly stoichiometric. It was also confirmed by the Fourier transform infrared spectroscopic studies. X-ray diffraction studies revealed that the films formed at oxygen partial pressure of 2 × 10⁻⁴ mbar showed the presence of (0 k 0) reflections indicated the layered structure of α-phase MoO₃. The electrical conductivity of the films decreased from 3.6 × 10⁻⁵ to 1.6 × 10⁻⁶ Ω⁻¹ cm⁻¹, the optical band gap of the films increased from 2.93 to 3.26 eV and the refractive index increased from 2.02 to 2.13 with the increase of oxygen partial pressure from 8 × 10⁻⁵ to 8 × 10⁻⁴ mbar, respectively.     

Observation of new laser transitions and saturation effects in optically pumped NO

We report investigations of an NO laser employing specially profiled magnetic fields of up to 3.4T, and F₂ pump laser intensities as great as 20 MW cm^–2. We have observed laser oscillation at 226 nm on a rotational branch of the B'-X/it(3–11) band of NO for the first time, in addition to the previously reported oscillation at 218 nm on the B'-X/it(3–10) band. We have also observed visible laser emission on a rotational branch of the B ²-B ² II(3–1) band of NO. Saturation of the NO laser pulse energy with pump intensity has been observed, the total NO laser pulse energy having been increased to 490 J. The possibility of increasing the NO laser pulse energy towards 1 mJ per transition is discussed.     

Pyroelectric properties in three phases coexistence Pb[(Mn0.33Nb0.67)0.5(Mn0.33Sb0.67)0.5]0.08(ZrxTi1−x)0.92O3 lead ceramics

The bulk dense Pb[(Mn_0.33Nb_0.67)_0.5(Mn_0.33Sb_0.67)_0.5]_0.08(Zr_xTi_1−x)_0.92O₃ pyroelectric ceramics have been successfully prepared by the conventional solid method. The effect of three phases coexistence in the ceramics is studied. When x = 0.95 and 0.85 in the ceramics, the maximum pyroelectric coefficient peaks appear at 23 °C and 45 °C, and the maximum values are 26.5 × 10⁻⁴ C/m² °C and 25.5 × 10⁻⁴ C/m² °C, respectively. The maximum pyroelectric coefficient appears large while the peaks widths are small. When the two kinds of ceramic powders mixed with the mol ratio of 2:1, the pyroelectric coefficient of the ceramics is above 10.0 × 10⁻⁴ C/m² °C in a broad temperature range from 20 °C to 55 °C. The possible physical mechanism of the temperature broadened phenomenon is briefly discussed.     

Polarization spectroscopy of ion-pair states of ICl

Molecular constants for the E0⁺(³P₂) and 1(³P₂) ion-pair states of ICl vapor have been determined using sequential two-photon polarization-labeling spectroscopy. The two states are coupled by a heterogeneous perturbation which is analyzed in some detail for low-lying vibrational levels of 1(³P₂). The I³⁵Cl potential constants for the 1(³P₂) state and the rotation-vibration constants for the set of f sublevels—i.e., the constants unaffected by coupling with the E state—are (in cm⁻¹) 1(³P₂): Y_0,0= 39103.814(32), Y_1,0= 170.213(15), Y_2,0= −0.4528(22), Y_3,0= −7.0(12) × 10⁻⁴, Y_4,0= −1.48(24) × 10⁻⁵ and Y_5,0= −6.6(19) × 10⁻⁸, Y^(f)_0,1= 5.6878(17) × 10⁻² Y^(f)_1,1= −2.110(24) × 10⁻⁴, Y^(f)_2,1= −1.23(62) × 10⁻⁷, and Y^(f)_0,1= −3.08(22) × 10⁻⁸Likewise, the I³⁵Cl constants determined for the E 0⁺(³P₂) state are E 0⁺(³P₂: Y_0,0= 39054.38(61), Y_1,0= 166.96(10), Y_2,0 = −0.3995(42), Y_0,1= 5.738(31) × 10⁻², and Y_1,1= −1.67(26) × 10⁻⁴Practical constraints in pumping the sequence E 0⁺ ← B 0⁺ ← × 0⁺ restrict the analysis of the E state to levels v = 9–15. Given the long extrapolation to the equilibrium state the 3σ statistical uncertainties quoted for these constants should be treated with caution.     

Power factor enhancement in Pr-substituted alloys prepared by high-pressure sintering

Bi₈₅Sb_15−xPr_x (x=0,1,2,3) alloys with partial substitution of Pr for Sb were synthesized by mechanical alloying followed by high-pressure sintering. The crystal structure was characterized by X-ray diffraction. The electrical conductivity and Seebeck coefficient were measured in the temperature range of 80–300 K. The results show that the electrical conductivity and Seebeck coefficient of Pr-substituted samples are both larger than those of the reference sample, Bi₈₅Sb₁₅, in the whole measurement temperature range. The power factor of Bi₈₅Sb₁₃Pr₂ reaches a maximum value of 3.83×10⁻³ W K⁻² m⁻¹ at 235 K, which is about four times larger than that of the reference sample, Bi₈₅Sb₁₅, at the same temperature.     

The effects of GaN capping layer thickness on two-dimensional electron mobility in GaN/AlGaN/GaN heterostructures

In this paper we present a study of the effect of GaN capping layer thickness on the two-dimensional (2D)-electron mobility and the two-dimensional electron gas (2DEG) sheet density which is formed near the AlGaN barrier/buffer GaN layer. This study is undertaken using a fully numerical calculation for GaN/Al_xGa_1−xN/GaN heterostructures with different Al mole fraction in the Al_xGa_1−xN barrier, and for various values of barrier layer thickness. The results of our analysis clearly indicate that increasing the GaN capping layer thickness leads to a decrease in the 2DEG density. Furthermore, it is found that the room-temperature 2D-electron mobility reaches a maximum value of approximately 1.8×10³ cm² /Vs⁻¹ for GaN capping layer thickness grater than 100 Å with an Al_0.32Ga_0.68N barrier layer of 200 Å thick. In contrast, for same structure, the 2DEG density decreases monotonically with GaN capping layer thickness, and eventually saturates at approximately 6×10¹² cm⁻² for capping layer thickness greater than 500 Å. A comparison between our calculated results with published experimental data is shown to be in good agreement for GaN capping layers up to 500 Å thickness.     

Large nonlinear optical properties of Fe2O3 nanoparticles

Nonlinear optical properties of Fe₂O₃ nanoparticles were investigated by the signal-beam Z-scan technique with Ar⁺ and Ne–He lasers. The largest reported effective nonlinear coefficient, n₂=−8.07×10⁻⁷ cm²/W, was obtained. It is demonstrated that the nonlinear optical response originals from quantum confinement effect.     

Elementary reactions of formyl (HCO) radical studied by laser photolysis—transient absorption spectroscopy

Several elementary reactions of formyl radical of combustion importance were studied using pulsed laser photolysis coupled to transient UV–Vis absorption spectroscopy: HCO → H + CO (1), HCO + HCO → products (2), and HCO + CH₃ → products (3). One-pass UV absorption, multi-pass UV absorption as well as cavity ring-down spectroscopy in the red spectral region were used to monitor temporal profiles of HCO radical. Reaction (1) was studied over the buffer gas (He) pressure range 0.8–100 bar and the temperature range 498–769 K. Reactions (2a), (2b), (2c), (3a) and (3b) as well as the UV absorption spectrum of HCO, were studied at 298 and 588 K, and the buffer gas (He) pressure of 1 bar. Pulsed laser photolysis (308, 320, and 193 nm) of acetaldehyde, propionaldehyde, and acetone was used to prepare mixtures of free radicals. The second-order rate constant of reaction (1) obtained from the data at 1 bar is: k₁(He) = (0.8 ± 0.4) × 10⁻¹⁰exp(−(66.0 ± 3.4) kJ mol⁻¹/RT) cm³ molecule⁻¹ s⁻¹. The HCO dissociation rate constants measured in this work are lower than those reported in the previous direct work. The difference is a factor of 2.2 at the highest temperature of the experiments and a factor of 3.5 at the low end. The experimental data indicate pressure dependence of the rate constant of dissociation of formyl radical 1, which was attributed to the early pressure fall-off expected based on the theory of isolated resonances. The UV absorption spectrum of HCO was revised. The maximum absorption cross-section of HCO is (7.3 ± 1.2) × 10⁻¹⁸ cm² molecule⁻¹ at 230 nm (temperature independent within the experimental error). The measured rate constants for reactions (2a), (2b), (2c), (3a) and (3b) are: k₂ = (3.6 ± 0.8) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ (298 K); k₃ = (9.3 ± 2.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹(298 and 588 K).     

High-resolution infrared and millimeterwave spectra of the v3=1 vibrational state of NF3 at 907 cm

The ν₃^±1 perpendicular band of ¹⁴NF₃ ( cm⁻¹) has been studied with a resolution of 2.5 × 10⁻³ cm⁻¹, and 3682 infrared (IR) transitions (J_max=55, K_max=45) have been assigned. These transitions were complemented by 183 millimeterwave (MMW) rotational lines (J_max=25, K_max=19) in the 150–550 GHz region (precision 50–100 kHz). The kl=+1 level reveals a strong A₁/A₂ splitting due to the l(2,2) rotational interaction (q=−4.05 × 10⁻³ cm⁻¹) while the kl=−2 and +4 levels exhibit small A₁/A₂ splittings due to l(2,−4) and l(0,6) rotational interactions. All these splittings were observed by both experimental methods. Assuming the v₃=1 vibrational state as isolated, a Hamiltonian model of interactions in the D reduction, with l(2,−1) rotational interaction (r=−1.96 × 10⁻⁴ cm⁻¹) added, accounted for the observations. A set of 26 molecular constants reproduced the IR observations with σ_IR=0.175 × 10⁻³ cm⁻¹ and the MMW data with σ_MMW=134 kHz. The Q reduction was also performed and found of comparable quality while the QD reduction behaved poorly. This may be explained by a predicted Coriolis interaction between v₃=1 and v₁=1 (A₁, 1032.001 cm⁻¹) which induces a slow convergence of the Hamiltonian in the QD reduction but has no major influence on the other reductions. The experimental equilibrium structure could be calculated as: r_e(N–F)=1.3676 Å and (FNF)=101.84°.