Triarylcarbinol functionalized gold nanoparticles for the colorimetric detection of nerve agent simulants

Gold nanoparticles functionalized with a triarylcarbinol derivative have been used as colorimetric molecular probes for the naked-eye detection of the nerve agent simulants DCNP and DFP. The detection process is based on the compensation of charges at the surface of the nanoparticles which triggers their aggregation in solution with the resulting change in their plasmon band.     

Determination of antioxidants by solid-phase extraction method in aqueous food simulants

An analytical method for the determination of specific migration levels of phenolic antioxidants and one phosphite antioxidant in the aqueous food simulants established by European legislation has been developed. This method involves solid-phase extraction (SPE) of the antioxidants with silica C₁₈ cartridge and their determination by liquid chromatography (LC) with diode-array detection. The achieved results in the studies of elution volume determination, breakthrough volume and accuracy are showed. Recoveries in the range of 78–104% and a relative standard deviation between 2.0 and 7.7% have been achieved.     

Non-proximate detection of explosives and chemical warfare agent simulants by desorption electrospray ionization mass spectrometry

Desorption electrospray ionization (DESI) mass spectrometry is used for the selective and sensitive detection of trace amounts of explosives and chemical warfare agent simulants from ambient surfaces at distances of up to 3 meters from the mass spectrometer.     

Dispersive solid-phase microextraction method for sample extraction in the analysis of four tetracyclines in water and milk samples by high-performance liquid chromatography with diode-array detection

A dispersive solid-phase microextraction (dispersive-SPME) method for the determination of tetracycline, oxytetracycline, chlortetracycline and doxycycline is proposed. Different silica-based and polymeric sorbents were evaluated for their capacity to simultaneously preconcentrate tetracyclines (TCs) in the dispersive format from aqueous or organic solutions. Silica-based sorbents especially functionalized with primary amine, secondary amine, or carbonyl groups have showed higher capacity than polymeric sorbents under organic environment. In the proposed dispersive solid-phase microextraction method, after extraction with acetonitrile and salt-promoted partitioning, TCs were adsorbed to a small amount of dispersive silica-based primary and secondary amine sorbents, desorbed with a small volume of desorption solution, and determined by high-performance liquid chromatography with diode-array detection. Under the optimal conditions, recoveries were determined for surface water and milk samples spiked at 10 ng/mL and 50–150 ng/g, respectively, and quantification was achieved by matrix-matched calibration. The calibration curves of four TCs in both samples showed linearity with a correlation coefficient value above 0.997. Average recoveries ranged from 97.1 to 104.1% and the precision was from 2.0 to 5.6%. Limits of detection ranged from 0.7 to 3.5 ng/mL and from 7.9 to 35.3 ng/g for four TCs surface in surface water and milk samples, respectively.     

Improved solid-phase extraction procedure for the isolation and in-sorbent pentafluorobenzyl alkylation of polyfunctional mercaptans. Optimized procedure and analytical applications

A fast method for the determination of aroma-powerful polyfunctional thiols at ng L(-1) level has been developed. Mercaptans are selectively retained in a 50mg solid-phase extraction cartridge and derivatization takes place in the same cartridge at room temperature (25 degrees C) in 20 min by adding small amounts of pentafluorobenzyl bromide (PFBBr) and a strong alkali: 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). The corresponding derivatives are further eluted and determined by gas chromatography-negative ion mass spectrometry (GC-NCI-MS). Isolation, derivatization, clean-up, elution and calibration conditions were examined. Carrying the reaction in the cartridge makes it possible to use water and non-polar reagents simultaneously, to avoid large volumes of toxic solvent, and to eliminate the excess of reagent. This was last accomplished by the reaction with mercaptoglycerol and further rinsing with a hydromethanolic solution. The method makes it possible to simultaneously determine 2-methyl-3-furanthiol (MF), 2-furfurylthiol (2-furanmethanethiol) (FFT), 4-mercapto-4-methyl-2-pentanone (MP) (as its methoxime), 3-mercaptohexylacetate (MHA) and 3-mercaptohexanol (MH). Absolute limits of detection were 0.2 (MF), 0.1 (FFT), 0.1 (MP), 0.3 (MHA) and 2 (MH) ng L(-1). Repeatability (1%相似文献   

Dispersive solid-phase extraction of alkaloids and polyphenols using borate hypercrosslinked polymers

In this study, a borate hyper-crosslinked polymer was synthesized by crosslinking 1-naphthalene boric acid and dimethoxymethane via the Friedel-Crafts reaction. The prepared polymer exhibits excellent adsorption performance toward alkaloids and polyphenols with maximum adsorption capacities ranging from 25.07 to 39.60 mg/g. Adsorption kinetics and isotherms model results indicated the adsorption was a monolayer and chemical process. Under the optimal extraction conditions, a sensitive method was established for the simultaneous quantification of alkaloids and polyphenols in green tea and Coptis chinensis by coupling with the proposed sorbent and ultra-high performance liquid chromatography detection. The proposed method exhibited a wide linear range of 5.0–5000.0 ng/ml with R² ≥ 0.99, a low limit of detection (0.66–11.25 ng/ml), and satisfactory recoveries (81.2%–117.4%). This work provides a simple and convenient candidate for the sensitive determination of alkaloids and polyphenols in green tea and complex herbal products.     

On-matrix derivatisation-extraction of precursors of nitrogen- and sulfur-mustards for verification of chemical weapons convention

Development and refinement of sample preparation protocols for retrospective detection and identification of chemical warfare agents (CWAs) and their markers is of paramount importance from verification point of view of chemical weapons convention (CWC). Precursors of nitrogen- and sulfur-mustards (NMPs and SMPs) are polar adsorptive markers of vesicant class of CWAs. Their detection in a given environmental sample may imply past contamination with mustards. For the efficient extraction of NMPs and SMPs from soil, on-matrix derivatisation-extraction (OMDEX) method was developed and optimized. The method involved trifluoroacetylation of analytes on soil itself, followed by extraction with suitable solvent. The extracted samples were analyzed by gas chromatography-mass spectrometry (GC-MS). This virtually single-step sample preparation offered better recoveries of NMPs and SMPs in comparison to conventionally used extraction, evaporation and derivatisation. The best recoveries of analytes were obtained with acetonitrile by OMDEX method. Dynamic linearity range of trifluoroacetylated (TFA) derivatives of NMPs and SMPs was 1-12 microg/L in GC-MS analysis in SIM mode. Repeatability and reproducibility of this technique containing 5 and 10 microg analytes/gm soil was <3.3% and <4.6%, respectively. OMDEX technique was finally applied for the detection of TFA derivatives of NMPs in the soil sample supplied in 16th official proficiency test conducted by OPCW in October 2004.     

Dispersive solid-phase extraction for the determination of sulfonamides in chicken muscle by liquid chromatography

A new, fast and low-cost sample preparation for the determination of sulfonamide (SA) residues in chicken muscle by LC technique has been developed. The procedure involves single extraction of sample with acetonitrile, followed by a rapid clean-up and was called "dispersive solid-phase extraction" (dispersive SPE). Using dispersive SPE 25 mg of octadecyl sorbent was added to 1 ml of acetonitrile extract, mixed and centrifuged. The acetonitrile layer was evaporated and residue was dissolved in acetate buffer (pH 3.5). Analysed compounds were detected by fluorescence detector after pre-column derivatization with fluorescamine. The separation of analytes was performed with gradient elution with mobile phase methanol: 2% acetic acid and RP-LC analytical column. The whole procedure was evaluated for six sulfonamides (sulfadiazine, sulfamerazine, sulfamethazine, sulfametoxypirydazine, sulfametoxazole and sulfadimetoxine) according to the European Commission Decision 2002/657/EC. Specificity, decision limit (CCalpha), detection capacity (CCbeta), trueness and precision were determined during validation process. The dispersive SPE with octadecyl sorbent was found suitable for sample preparation before sulfonamide determination in chicken muscle. As it was found the most of endogenous matrix components were removed and the analytes were isolated from spiked samples with recoveries above 90%. The used analytical conditions allow to successively separate all the tested sulfonamides with the limit of detection at the level of 1-5 microg/kg. The method is simple, rapid and more effective than conventional methods.     

Trace level detection and identification of chemicals related to the chemical weapons convention from complex organic samples

A solid-phase extraction (SPE) method involving selective usage of solvents has been developed for trace level identification of chemical warfare agents (CWAs) present in a complex organic background. The total ion chromatograms obtained from direct gas chromatography-electron ionization mass spectrometric analysis of samples spiked with CWAs in the presence of diesel are very complex and dominated by hydrocarbon peaks and the same after treatment with SPE show distinct peaks corresponding to spiked chemicals. The recovery of samples from SPE is found to be 70-85% at the 10 ppm level.     

Micellar electrokinetic chromatography with amperometric detection and off-line solid-phase extraction for analysis of carbamate insecticides

Six selected primary carbamate insecticides, methomyl, carbaryl, carbofuran, propoxur, isoprocarb, and promecarb, were hydrolyzed in alkaline solution, resulting in electroactive derivatives detectable at a platinum (Pt) electrode poised at +0.8 V vs Ag/AgCl (3 M NaCl). The Pt electrode was inserted into a small electrochemical cell and positioned close to the capillary outlet as an end-column detector to detect the carbamate derivatives after electrophoretic separation. Based on their predicted pK_a values and aqueous solubilities, micellar electrokinetic chromatography (MEKC) was optimized for baseline separation of the derivatives using 20 mM borate, pH 10.2 containing 20 mM sodium dodecyl sulfate as a running buffer. When combined with solid-phase extraction (SPE) on octadecyl silica, a preconcentration factor of 100-fold achieved detection to 0.5 μM methomyl and to 0.01 μM for the remaining five pesticides, significantly below the level regulated by government agencies of most countries. The SPE-MEKC method when applied to the separation and analysis of spiked river water and soil samples, yielded results with excellent reproducibility, recovery and selectivity.     

分散固相萃取-高效液相色谱法测定水产品中7种麻醉剂

随着麻醉剂广泛用于渔业生产过程和水产品运输等领域,建立水产品中麻醉剂残留的检测方法具有重要意义.由于水产品基质复杂且麻醉剂残留水平低,因此需要合适的前处理方法以提高检测灵敏度.该研究基于分散固相萃取-高效液相色谱,建立了一种同时检测水产品中普鲁卡因、丁氧卡因、三卡因、丁香酚、甲基丁香酚、异丁香酚、甲基异丁香酚7种麻醉剂...     

Dispersive solid-phase extraction clean up combined with Soxhlet extraction for the determination of 16 PAHs in soil samples by GC-MS

Dichloromethane soil samples extracts were prepared using Soxhlet extraction technique, and after clean-up step, gas chromatography-mass spectrometry analysis of 16 priority polycyclic aromatic hydrocarbons (PAHs) was carried out. A comparison of dispersive solid-phase extraction (dSPE) and column chromatography (cC), as clean-up techniques, was evaluated. Six different sorbents (silica, diatomaceous earth, primary–secondary amine, C18, clinoptilolite and florisil) were tested as dispersive clean-up sorbents versus activated silica and alumina for cC. Best results for three concentration levels among dSPE were obtained using diatomaceous earth, with recovery values in the range of 75–112% for 13 of 16 analysed compounds, while cC recoveries were in the range of 75–111% for all analysed PAHs. Analysis of 12 soil samples from urban area of Ni? (Serbia) singled out acenaphthene as the most abundant compound.     

Comparison of solid-phase extraction and solid-phase microextraction for carbofuran in water analyzed by high-performance liquid chromatography-photodiode-array detection

In this study a direct solid-phase microextraction (SPME) procedure has been developed for the determination of carbofuran in water. Experimental parameters such as selection of SPME coating, effect of temperature, effect of salt addition and solvent desorption were studied and optimized. Analytical parameters such as linearity, precision, detection and quantitation limits, and matrix effects for solid-phase extraction (SPE) and SPME methods were evaluated for comparison purposes with the aim of selecting the most appropriate depending on the detection capabilities required. SPE and SPME were followed by high-performance liquid chromatography with diode-array detection, using a 50 x 4.6 mm I.D. guard column and a 150 x 4.6 mm I.D. analytical column, both packed with C18 silica. Both methods can be applied to real samples and give the same results, but SPE allows the detection of lower carbofuran concentrations (0.06 microg/L) as compared to     

Real‐time trace detection and identification of chemical warfare agent simulants using recent advances in proton transfer reaction time‐of‐flight mass spectrometry

This work demonstrates for the first time the potential of using recent developments in proton transfer reaction mass spectrometry for the rapid detection and identification of chemical warfare agents (CWAs) in real‐time. A high‐resolution (m/Δm up to 8000) and high‐sensitivity (～50 cps/ppbv) proton transfer reaction time‐of‐flight mass spectrometer (PTR‐TOF 8000 from Ionicon Analytik GmBH) has been successfully used to detect a number of CWA simulants at room temperature; namely dimethyl methylphosphonate, diethyl methylphosphonate, diisopropyl methylphosphonate, dipropylene glycol monomethyl ether and 2‐chloroethyl ethyl sulfide. Importantly, we demonstrate in this paper the potential to identify CWAs with a high level of confidence in complex chemical environments, where multiple threat agents and interferents could also be present in trace amounts, thereby reducing the risk of false positives. Instantaneous detection and identification of trace quantities of chemical threats using proton transfer reaction mass spectrometry could form the basis for a timely warning system capability with greater precision and accuracy than is currently provided by existing analytical technologies. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermally assisted methylation and subsequent silylation of scheduled acids of chemical weapon convention for on-site analysis and its comparison with the other methods of methylation

On-site verification of the chemical weapon convention (CWC) requires provision for the detection and identification of alkyl phosphonic acids as well as some organic acids that are amenable to GC-MS only after derivatisation. Various derivatisation methods have been used for the identification of these acids and for many cases the methyl derivatives are less prone to artifacts possibly leading to false positive identification. Methylation with diazomethane is widely used but, especially for on-site analysis it has limitation due to the potential explosive and health hazards. Other methylation procedures like trimethylsilyldiazomethane (TMSD), thermally assisted methylation (TAM) by trimethylphenylammonium hydroxide (TMPAH) and trimethylsulfonium hydroxide (TMSH) are evaluated. Data for methylation for the alkyl alkylphosphonic acids, alkylphosphonic acids and benzilic acid are reported. In addition, TAM followed by the silylation in the same sample without any additional sample preparation is also reported. Several parameters such as solvent, temperature, amount of reagents, time, etc. were studied. The two commercially available reagents namely, TMPAH and TMSH for TAM and subsequent silylation were evaluated. The LOD with TMPAH was below 0.5 ng per injection since all of the acids were detected by GC-MS with the S/N of >3 in full scan mode by AMDIS and their inter day relative standard deviation was from 4.7% to 10.8%.     

New multiresidue method using solid-phase extraction and gas chromatography-micro-electron-capture detection for pesticide residues analysis in royal jelly

Royal jelly, one of the most important bee products, can be contaminated with pesticide and/or antibiotic residues resulting from treatments applied either inside beehives or in the agricultural environment. A new multiresidue method was developed and validated for analysis of nine pesticides in royal jelly. Solid-phase extraction RP-C(18) cartridges were used for sample purification and isolation of analytes. Final solution was analyzed with GC and micro-electron-capture detection. Four synthetic acaricides used by beekeepers (bromopropylate, coumaphos, malathion and tau-fluvalinate), and moreover one pyrethroid, two organochlorine, and two organophosphate insecticides were tested. Linearity is demonstrated for the range of 0.0025-1mgkg(-1), with correlation coefficients ranging from 0.99991 to 0.99846, depending on the analyte. Overall recovery rates from royal jelly blank samples spiked at five fortification levels ranged from 80.8% (lindane) to 91.3% (ethion), well above the range defined by the SANCO/10232/2006 and EC/675/2002 documents. The limit of quantification was <0.003-0.005 mg kg(-1) depending on the analyte, and the reporting level of the method, defined as the lowest recovery level, was 0.005 mg kg(-1).     

Use of solid-phase microextraction for the analysis of bisphenol A and bisphenol A diglycidyl ether in food simulants

A new method has been developed to simultaneously analyse bisphenol A (BPA) and bisphenol A diglycidyl ether (BADGE) in aqueous based food simulants. The method consists on direct immersion solid-phase microextraction (SPME) of the analytes from the liquid matrix and subsequent chromatographic analysis by gas chromatography-mass spectrometry. Using the proposed method, a whole analysis (including chromatographic step) can be completed in less than 40 min, with minimum sample handling. The SPME method shows good analytical performance for simultaneous BPA and BADGE analysis, except for BADGE determination in the aqueous alcohol (simulant C) solution. Detection limits ranging from 0.1 to 2.0 ng/g for BPA and from 13 to 15 ng/g from BADGE were obtained, with a linear range from the low-ng/g to several-microg/g range for BPA and from 0.1 microg/g to 40 microg/g for BADGE. A possible optimisation method has been also developed and introduced.     

Trace analysis of vinclozoline by gas chromatography with electrolytic conductivity detection and solid-phase extraction

A procedure for the analysis of vinclozoline in tap and surface water by GC and Hall detector has been developed. Each step — the analysis of vinclozoline in acetone standard solution, in deionized water and in tap water after solid-phase extraction — was checked by statistical tests (variance homogeneity, linearity test, residue analysis, runaway tests, F-test, t-test). The detection limits and determination limits were calculated from the calibration curve and its prediction interval (according to the DFG). The detection limit for vinclozoline in tap water was found to be 0.03 g/l and the determination limit is 0.06 g/l by a recovery rate of 89%.     

Application of cation-exchange solid-phase extraction for the analysis of amino alcohols from water and human plasma for verification of Chemical Weapons Convention

The analysis of nitrogen containing amino alcohols, which are the precursors and degradation products of nitrogen mustards and nerve agent VX, constitutes an important aspect for verifying the compliance to the CWC (Chemical Weapons Convention). This work devotes on the development of solid-phase extraction method using silica- and polymer-based SCX (strong cation-exchange) and MCX (mixed-mode strong cation-exchange) cartridges for N,N-dialkylaminoethane-2-ols and alkyl N,N-diethanolamines, from water. The extracted analytes were analyzed by GC-MS (gas chromatography-mass spectrometry) in the full scan and selected ion monitoring modes. The extraction efficiencies of SCX and MCX cartridges were compared, and results revealed that SCX performed better. Extraction parameters, such as loading capacity, extraction solvent, its volume, and washing solvent were optimized. Best recoveries were obtained using 2 mL methanol containing 10% NH(4)OH and limits of detection could be achieved up to 5 x 10(-3) microg mL(-1) in the selected ion monitoring mode and 0.01 microg mL(-1) in full scan mode. The method was successfully employed for the detection and identification of amino alcohol present in water sample sent by Organization for Prohibition of Chemical Weapons (OPCW) in the official proficiency tests. The method was also applied to extract the analytes from human plasma. The SCX cartridge showed good recoveries of amino alcohols from human plasma after protein precipitation.     

A lab-on-a-chip for detection of nerve agent sarin in blood

Sarin (C(4)H(10)FO(2)P,O-isopropyl methylphosphonofluoridate) is a colourless, odourless and highly toxic phosphonate that acts as a cholinesterase inhibitor and disrupts neuromuscular transmission. Sarin and related phosphonates are chemical warfare agents, and there is a possibility of their application in a military or terrorist attack. This paper reports a lab-on-a-chip device for detecting a trace amount of sarin in a small volume of blood. The device should allow early detection of sarin exposure during medical triage to differentiate between those requiring medical treatment from mass psychogenic illness cases. The device is based on continuous-flow microfluidics with sequential stages for lysis of whole blood, regeneration of free nerve agent from its complex with blood cholinesterase, protein precipitation, filtration, enzyme-assisted reaction and optical detection. Whole blood was first mixed with a nerve gas regeneration agent, followed by a protein precipitation step. Subsequently, the lysed product was filtered on the chip in two steps to remove particulates and fluoride ions. The filtered blood sample was then tested for trace levels of regenerated sarin using immobilised cholinesterase on the chip. Activity of immobilised cholinesterase was monitored by the enzyme-assisted reaction of a substrate and reaction of the end-product with a chromophore. Resultant changes in chromophore-induced absorbance were recorded on the chip using a Z-shaped optical window. Loss of enzyme activity obtained prior and after passage of the treated blood sample, as shown by a decrease in recorded absorbance values, indicates the presence of either free or regenerated sarin in the blood sample. The device was fabricated in PMMA (polymethylmethacrylate) using CO(2)-laser micromachining. This paper reports the testing results of the different stages, as well as the whole device with all stages in the required assay sequence. The results demonstrate the potential use of a field-deployable hand-held device for point-of-care triage of suspected nerve agent casualties.