Mechanism of nitromethane liquid membrane oscillator containing sodium oleate

The oscillatory behavior of a liquid membrane oscillator with anionic surfactant was investigated in order to understand the oscillation mechanism at the molecular level. As a theoretical framework, an approach based on chemical kinetics laws has been used. The chosen system involved nitromethane with 2,2(')-bipyridine as liquid membrane. The aqueous donor phase contained sodium oleate and butanol, while sodium chloride was added to the aqueous acceptor phase. It was established that the oscillations take place exclusively at the aqueous acceptor phase/membrane interface. Therefore, liquid membrane oscillators with anionic surfactants behave the same way as oscillators with cationic surfactants as to the location of oscillations. An oscillation mechanism involving three stages is proposed and confirmed by numerical simulations. The oscillations of electrical potential differences between the two aqueous phases are produced by sudden adsorption and desorption of anionic surfactant in solvated form and butanol at the acceptor/membrane interface. The whole process is controlled by the slow diffusion of these species across the liquid membrane. The chaotic character of the oscillations was demonstrated by Lyapunov exponents obtained from the strange attractor of the system.     

Mechanism of a four-phase liquid membrane oscillator containing hexadecyltrimethylammonium bromide

The oscillatory behavior of a nitromethane based liquid membrane oscillator was investigated to contribute to the oscillation mechanism at the molecular level. At the beginning the system contains three phases: the aqueous donor phase in which the cationic surfactant, hexadecyltrimethylammonium bromide and ethanol are present and the aqueous acceptor phase made up by sucrose solution separated by the liquid membrane containing a constant amount of picric acid. During experiment a new phase x is created between the liquid membrane and acceptor phase. It was established that the oscillations take place at the membrane/phase x and the phase x/acceptor phase interfaces. Five basic regions can be distinguished in the oscillation pattern. The molecular events provoking the oscillations of electric potential difference between the two aqueous phases involve essentially the diffusion of hexadecyltrimethylammonium bromide and ion pairs formed by the cation of the surfactant and the picrate anion to the vicinity of the membrane/phase x interface, sudden adsorption of these ion pairs at this interface in noncatalytic and autocatalytic steps, desorption of ion pairs from the membrane/phase x interface into phase x, diffusion of ion pairs to the vicinity of phase x/acceptor phase interface, and sudden adsorption at this interface followed by desorption to the aqueous acceptor phase. It is shown by numerical simulations that the proposed mechanism may account for the observed oscillations and for the species distribution throughout the system as found experimentally. This four-phase system behaves like two coupled oscillators.     

Design of oscillations across the artificial liquid membrane between water and oil phases

Two types of system were designed which exhibited sustained potential oscillations across the liquid membrane between an aqueous solution (water phase) and a nitrobenzene solution (oil phase). Type I contained a cationic surfactant in water phase corresponding to an organic acid in oil phase, while type II contained an anionic surfactant corresponding to an organic base. The oscillating behaviors were investigated, and the oscillating mechanism was briefly discussed. Simulation on the oscillatory model showed a qualitative agreement between the experimental and computed curves of oscillations.     

Observations of the effect of anionic, cationic, neutral, and zwitterionic surfactants on the Belousov-Zhabotinsky reaction

In this paper we report the experimental observations of the effects of various surfactants on the oscillations of the ferroin-catalyzed Belousov-Zhabotinsky (BZ) reaction. The oscillations are followed by observing the change in absorbance at 510 nm due to ferroin in a well-stirred closed BZ reacting system. We have used sodium dodecyl sulfate (SDS) as the anionic surfactant, cetyl trimethylammonium bromide (CTAB) as the cationic surfactant, Triton X-100 as the neutral surfactant, and 3-[(3-cholamidopropyl)dimethylammonio)]-1-propanesulfonate (CHAPS) as the zwitterionic surfactant. In general, we observed that there is a change in the oscillation behavior in the presence of each of these surfactants above their critical micellar concentrations. For different surfactants, the time-dependent evolution of the oscillations is found to be characteristic of the surfactant. The results of our study suggest that the evolution of oscillations is most regular in the presence of micelles of SDS.     

Effect of buoyancy on appearance and characteristics of surface tension repeated auto-oscillations

The effect of buoyancy on spontaneous repeated nonlinear oscillations of surface tension, which appear at the free liquid interface by dissolution of a surfactant droplet under the interface, is considered on the basis of direct numerical simulation of the model system behavior. The oscillations are the result of periodically rising and fading Marangoni instability. The buoyancy force per se cannot lead to the oscillatory behavior in the considered system, but it influences strongly both the onset and decay of the instability and therefore, affects appearance and characteristics of the oscillations. If the surfactant solution density is smaller than the density of the pure liquid, then the buoyancy force leads to a considerable decrease of the induction period and the period of oscillations. The buoyancy force affects also the dependence of the oscillation characteristics on the system dimensions. The results of the simulations are compared with the available experimental data.     

STRATIFICATION IN EMULSION FILMS

Formation of films possessing a layered or stratified structure has been observed with foam films from liquid crystals, from concentrated surfactant solutions and in liquid layers on the surface of water. The stratifying films have a structure similar to that of the smectic phase which soaps are known to form in the bulk solution at high concentrations. The repeating units of which such films are built are the so-called black films: each unit consists of two surfactant layers interleaved by a thin aqueous core. In the study presented here we have observed that stratification can also take place in emulsion films from concentrated aqueous surfactant solutions. We have compared these results with those obtained for foam films using the same surfactant, i.e. sodium dodecylsulfate.     

Surfactant transfer through a liquid membrane: origin of spontaneous oscillations at the membrane/acceptor phase interface

Instability due to surfactant redistribution in a liquid membrane system consisting of two solutions, namely source and acceptor, separated by a layer of immiscible liquid is studied theoretically and experimentally. The transfer of a surfactant from a source phase to an acceptor phase is often accompanied by spontaneous nonlinear oscillations of electrical potential and/or interfacial tension. The oscillations can be generated at each of the membrane interfaces. Here a mechanism of oscillation, which develops at the membrane/acceptor phase interface, is proposed on the basis of direct numerical simulation of the system evolution. Performed experimental studies confirm the theoretical results.     

Morphology and mechanical properties of surfactant aggregates at water-silica interfaces: molecular dynamics simulations

Dilute and concentrated surfactant systems at the solid-liquid interface are examined using classical molecular dynamics simulations. Particular emphasis is placed on understanding how surfactants aggregate and form the micellar structure, how micelles change shape at high concentrations in aqueous media and in the presence of hydrophilic surfaces, and at what force this micellar structure breaks apart during indentation of micelle-covered surfaces with a proximal probe microscope tip. The specific system of interest is C12TAB (n-dodecyltrimethylammonium bromide) surfactant in an aqueous medium that is modeled with empirical potentials. The simulations predict that the micelle structure in water is compact and either spherical or elliptical in shape. In the presence of a hydrophilic surface of silica, the structure evolves into a flat elliptical shape, in agreement with experimental findings. The simulated indentation of the micelle/silica system causes the micelle to break apart at an indentation force of about 1 nN and form a surfactant monolayer. The predicted force curve is in excellent agreement with experimental measurements.     

乳液引起的Daniell电池中的电化学振荡

由油酸的煤油溶液与NaOH和CTAB两水溶液混合制成O/W型乳液.实验发现,此乳液的加入可使丹尼尔电池产生电池反应与电极反应的明显振荡现象.自发过程结束后,通以2 V, 50 Hz或100 Hz交流电4 h,则此电池反应可形成可逆振荡.由表面活性剂对电极表面的吸附和乳液结构变化解释了振荡机理.乳液混合能参与了此电化学反应.     

Steric repulsion between internal aqueous droplets and the external aqueous phase in double emulsions

A theoretical model for analyzing the steric repulsion energy between internal aqueous droplets and the external aqueous phase in double emulsions, which results from the steric interaction between the surfactant molecules adsorbed at the two interfaces, has been established. The steric interaction is dependent on the separation distance between the internal aqueous droplets and the external aqueous phase, the thicknesses of the two adsorbed surfactant layers, and the size of the internal aqueous droplets and the oil globules, all of which determine the extent of the compression of the adsorbed surfactant molecules. The thickness of each of the two surfactant layers have the same effect on the steric repulsion, and stronger steric interaction can be achieved with thicker adsorbed layers, which can effectively prevent coalescence between the internal aqueous droplets and the external aqueous phase. Increasing the internal aqueous droplet size can produce stronger steric repulsion; however, larger oil globules will weaken the steric repulsion, indicating that a more stable double-emulsion system can be achieved by preparing the system with smaller oil globules and larger internal aqueous droplets.     

Dynamic surface properties of polyelectrolyte/surfactant adsorption films at the air/water interface: poly(diallyldimethylammonium chloride) and sodium dodecylsulfate

The dynamic surface elasticity, dynamic surface tension, and ellipsometric angles of mixed aqueous poly(diallyldimethylammonium chloride)/sodium dodecylsulfate solutions (PDAC/SDS) have been measured as a function of time and surfactant concentration. This system represents a typical example of polyelectrolyte/surfactant complex formation and subsequent aggregation on the nanoscale. The oscillating barrier and oscillating drop methods sometimes led to different results. The surface viscoelasticity of mixed PDAC/SDS solutions are very close to those of mixed solutions of sodium polystyrenesulfonate and dodecyltrimethylammonium bromide but different from the results for some other polyelectrolyte/surfactant mixtures. The abrupt drop in surface elasticity when the surfactant molar concentration approaches the concentration of charged polyelectrolyte monomers is caused by the formation of microparticles in the adsorption layer. Aggregate formation in the solution bulk does not influence the surface properties significantly, except for a narrow concentration range where the aggregates form macroscopic flocks. The mechanism of the observed relaxation process is controlled by the mass exchange between the surface layer and the flocks attached to the liquid surface.     

Study on the oscillating phenomena of electrical potential across a liquid membrane

The electrical oscillations across a liquid membrane in water/oil/water system was studied with octanol as oil phase by introducing two opposite charged surfactants in oil and aqueous phase, respectively. The sustained and rhythmic oscillation was observed. To a certain extent, the features of the oscillation (e.g. induction time, frequency, life time and orientation of the pulse pikes) strongly depend on the property of surfactant, dissolved in octanol. The mechanism may be explained by the formation and destruction of dual-ion surfactant membrane accompanying with emulsification at the interface and considering the coupling effect of diffusion and associated reaction in the vicinity of the interface.     

辛基三甲基溴化铵与辛基硫酸钠混合水溶液的相行为

对辛基三甲基溴化铵(OTAB)与辛基硫酸钠(SOS)正、负离子混合表面活性剂水溶液的相行为进行了研究.在高浓度的溶液中,混合表面活性剂形成液晶相,随着混合摩尔比OTAB/SOS接近于1,液晶结构由六角相转层状相,同时夹杂少量沉淀物;在中等浓度时,任意混合摩尔比例下皆为均相透明溶液;在低浓度下,在很宽的OTAB/SOS混合摩尔比的范围,出现双水相,其中的表面活性剂稀薄相,为不同大小的胶团与囊泡组成的稀溶液,另一表面活性剂富集相中则为数密度很大的囊泡聚集体,富集相对油溶性染料的增溶作用比非富集相高得多.     

Photo-isomerization of spiropyran-modified cationic surfactants

Photo-induced isomerization of a newly synthesized surfactant, 1'(6-trimethylammoniododecyl)-3('),3(')-dimethyl-6-nitrospiro-(2H-1-benzopyran-2,2'-indoline) bromide (SP-Me-12), has been characterized on the basis of the UV-vis absorption spectra and the surface tension data. Visible light (lambda>420 nm) incident on the aqueous solution of SP-Me-12 results in the isomerization from the merocyanine (MC) form to the spiropyran (SP) form; this structural change was confirmed by a complete disappearance of a characteristic absorption peak of the MC form. When the surfactant solution is stored in the dark, the isomerized SP form reverts to the original MC form, however, the reverse isomerization rate is observed to be considerably slower than that seen for visible light irradiation (from the MC form to the SP form). A reversible change in the surface tension of the aqueous surfactant solution is observed for the photo-induced isomerization: the surface tension measured below the critical aggregation concentration decreases as a result of the visible light irradiation and it is gradually reversed to the original level during the equilibration in the dark.     

Miscibility of sodium dodecyl sulfate and sodium decyl sulfate in the adsorbed film and micelle

The interfacial tension of the aqueous solution of sodium dodecyl sulfate (SDS) and sodium decyl sulfate (SDeS) mixture against hexane was measured as a function of the total molality and composition of the surfactant mixture at 298.15 K under atmospheric pressure. The compositions of adsorbed film and micelle were evaluated numerically by applying the thermodynamic relations to the experimental results. These results were shown in the form of the phase diagrams of adsorption and micelle formation and compared with those of the aqueous solution of sodium perfluorooctanoate (SPFO) and SDeS mixture. It was found that the diagrams of SDS and SDeS system have swollen cigar shapes and are quite different from those of SPFO and SDeS system which show non-ideal mixing both in the adsorbed film and micelle. This finding was attributed to the fact that the interaction between fluorocarbon and hydrocarbon chains is weaker than that between hydrocarbon chains.     

聚氧乙烯类表面活性剂体系中银纳米颗粒的合成

将AgNO3水溶液与非离子表面活性剂AEO 7按一定比例混合,即可形成六方液晶.体系中的Ag＋被表面活性剂分子AEO 7还原成Ag,形成Ag的纳米颗粒.在这一过程中,非离子表面活性剂液晶既是还原剂,又是反应介质和稳定剂.在合成过程中,聚氧乙烯类表面活性剂的乙氧基形成了氢过氧化物,从而具有了将Ag＋还原成单质Ag的能力. Ag纳米颗粒生长到一定时间不再继续变大,这表明颗粒的长大是靠自身的生长,并不发生颗粒聚集.控制液晶体系中反应物的浓度、含量以及反应时间可得到不同大小的Ag纳米颗粒.所形成的Ag纳米颗粒的平均粒径一般小于10 nm.     

Nonlinear spontaneous oscillations at the liquid/liquid interface produced by surfactant dissolution in the bulk phase

The results of theoretical and experimental studies of spontaneous nonlinear oscillations produced at the liquid/liquid interface by surfactant transfer from a point source situated in one of the bulk phases are presented. The theoretical analysis is based on the direct numerical simulation of the system evolution. The experiments are performed for the heptane/water interface using middle-chain aliphatic alcohols as surfactants. The results for the oil/water interface are compared with the corresponding data obtained for the air/water interface. The presented results allow the conclusion that auto-oscillations at the air/liquid and liquid/liquid interfaces are governed by very similar mechanisms but their characteristics are strongly dependent on the properties of the two contacting media, in particular, on the surfactant partition coefficient.     

Association and phase behavior of hydrophobically modified photoresponsive poly(acrylamide)s in the presence of ionic surfactant

 The extent of association between the cationic surfactant TTAB and a series of hydrophobically modified polyacrylamides (HPAMs) containing an N-n-alkyl and substituted azobenzene hydrophobic sidegroup has been studied utilizing a cationic surfactant-selective membrane electrode. Binding of TTAB to the polymer hydrophobes is found to increase with increasing hydrophobicity of the hydrophobe. In the presence of electrolyte, aqueous solutions of HPAMs and ionic surfactant exhibit an associative phase separation. The temperature or clearing point (CP) at which the system goes from a one phase to two-phase system are reported. The area of the two-phase region is found to increase with increasing electrolyte concentration, hydrophobicity of the hydrophobe for the high molecular weight HPAMs, and decreasing hydrophobicity for low molecular weight HPAMs. Exposure of HPAMs containing an azobenzene hydrophobe to UV light results in a decrease in interaction between the hydrophobe and surfactant and a corresponding decrease in the CP due to conversion of azobenzene from the more hydrophobic trans form to the less hydrophobic cis isomer. Received: 23 September 1996 Accepted: 11 March 1997     

Unique role of ionic liquid [bmin][BF4] during curcumin-surfactant association and micellization of cationic, anionic and non-ionic surfactant solutions

Hydrophilic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroburate, modified the properties of aqueous surfactant solutions associated with curcumin. Because of potential pharmaceutical applications as an antioxidant, anti-inflammatory and anti-carcinogenic agent, curcumin has received ample attention as potential drug. The interaction of curcumin with various charged aqueous surfactant solutions showed it exists in deprotonated enol form in surfactant solutions. The nitro and hydroxyl groups of o-nitrophenol interact with the carbonyl and hydroxyl groups of the enol form of curcumin by forming ground state complex through hydrogen bonds and offered interesting information about the nature of the interactions between the aqueous surfactant solutions and curcumin depending on charge of head group of the surfactant. IL[bmin][BF4] encouraged early formation of micelle in case of cationic and anionic aqueous surfactant solutions, but slightly prolonged micelle formation in the case of neutral aqueous surfactant solution. However, for curcumin IL [bmin][BF4] favored strong association (7-fold increase) with neutral surfactant solution, marginally supported association with anionic surfactant solution and discouraged (～2-fold decrease) association with cationic surfactant solution.     

Pharmaceutical quality control of acid and neutral drugs based on competitive self-assembly in amphiphilic systems

An aggregation parameter-based methodology for determining acid and neutral drugs in pharmaceutical dosage forms is presented. The method is based on competitive self-assembly in ternary dye-surfactant-drug aqueous mixtures. Dyes bearing charge of opposite sign to that of surfactants bind to surfactant to form mixed dye-surfactant aggregates, which are monitored from changes in the spectra features of the dye. The drug competes with the dye to interact with the surfactant to form drug-surfactant aggregates, which results in a decrease in the surfactant to dye binding degree proportional to the drug concentration in the aqueous solution. Coomassie Brilliant Blue G (CBBG) and didodecyldimethylammonium bromide (DDABr) were the dye and surfactant reactant used, respectively. The suitability of the surfactant to dye binding degree (SDBD) method to determine drugs with very different molecular structure: propionic (flurbiprofen, ibuprofen, naproxen and ketoprofen) and acetic (diclofenac, felbinac and zomepirac) acids, indolines (indomethacin and sulindac), glycyrrhetinic acid derivatives (carbenoxolone and enoxolone), salicylates (diflunisal and phenyl salicylate), oxicams (meloxicam, piroxicam and tenoxicam), pyrazolones (phenylbutazone and sulfinpyrazone) and hydrocortisones (dexamethasone and prednisolone) has been proved. The proposed method was successfully applied to the determination of drugs in commercial formulates (effervescent granulates, tablets, suppositories, gels and blisters) with a minimum sample treatment (dilution of liquid samples and dissolution of solid samples).