Activation of H2 by phosphinoboranes R2PB(C6F5)2

Phosphinoboranes that combine bulky electron-rich phosphides and electron deficient B(C6F5)2 fragments produce monomeric phosphinoboranes that undergo facile addition of H2 to give the phosphine-borane adducts (R2PH)(HBR'2). This finding in combination with DFT calculations shed light on the uptake of H2 across a group 13-group 15 bond, a critical requirement for the development of recyclable H2 storage materials.     

Synthesis and reactivity of the phosphinoboranes R2PB(C6F5)2

The phosphinoboranes [R(2)PB(C(6)F(5))(2)](2) (R = Et 1, Ph 2) and R(2)PB(C(6)F(5))(2) (R = tBu 3, Cy 4, Mes 5) were synthesized from the reaction of (C(6)F(5))(2)BCl and the corresponding lithium phosphide. The relationships between B-P distance, P pyramidality, and the extent of BP multiple bonding were further explored computationally. Natural Bond Order (NBO) analyses of 3 and 4 showed that the π-bonding highest occupied molecular orbitals (HOMOs) were highly polarized. In addition the Lewis acid-base adducts, R(2)(H)P·B(H)(C(6)F(5))(2) (R = Et 6; Ph 7; tBu 8; Cy 9; Mes 10) were prepared via the reaction of the phosphines R(2)PH with the borane HB(C(6)F(5))(2). Compounds 1 and 2 showed no signs of reaction with H(2); however, reaction of compounds 3 and 4 with H(2) was observed to give 8 and 9. In a related set of reactions compounds 3 and 4 were reacted with H(3)NBH(3) or Me(2)(H)NBH(3) also led to the generation of 8 and 9, respectively. The reaction profile of the reaction of (CF(3))(2)BPR(2) with H(2) was examined computationally and shown to be exothermic. Efforts to effect the reverse reaction, that is, dehydrogenation of adducts 6-10 were unsuccessful. Compound 4 was also shown to react with 4-tert-butylpyridine to give Cy(2)PB(C(6)F(5))(2)(4-tBuC(5)H(4)N) 11 while reactions of 3 and 4 with the Lewis acid BCl(3) gave the dimers (R(2)PBCl(2))(2) (R = tBu 12, Cy 13) and the byproduct ClB(C(6)F(5))(2).     

Perfluoroalkylphosphine coordination chemistry of platinum: synthesis of (C2F5)2PPh and (C2F5)PPh2 complexes of platinum(II)

A 1:1 addition of Ph2PCl to an ethereal solution of C2F5Li (formed from the reaction of BuLi with C2F5Cl) yields Ph2P(C2F5)(abbreviated pfepp) (1). The introduction of a fluoroethyl group results in a phosphine with electronic characteristics that approximate phosphites, bridging the electronic gap between traditional donor phosphine ligands and more electrophilic phosphine ligands like PhP(C2F5)2 (2). The pfepp ligand 1 is isolated as a high boiling liquid, which crystallizes upon standing at room temperature in an inert atmosphere. A series of Pt(II) complexes of the type trans-L2PtCl2 (L = pfepp 3; PhP(C2F5)2 4) have been prepared and structurally characterized by multinuclear NMR, IR and X-ray crystallography. The crystal structure of is the first example of a structurally characterized monodentate phosphine with a pentafluoroethyl pendant group.     

Reaction of (C6F5)2HGeGeH(C6F5)2 with triethylbismuth: molecular structure of [(C6F5)2Ge]4Bi2

The reaction of (C₆F₅)₂HGeGeH(C₆F₅)₂ with triethylbismuth affords a new polynuclear germylbismuth derivative, [(C₆F₅Ge]₄Bi₂ (1). The metal framework of molecule1 has the form of a gable roof built by two central Bi atoms and four peripheral Ge atoms with covalent Bi-Bi bonds [3.045(3) Å], Bi-Ge [2.724(5)-2.755(4) Å] and Ge-Ge [2.444(6), 2.465(6) Å].Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 921–924, May, 1994.     

Coordination compounds with the general formula trans-[M(18-crown-6)(C5HO2F6)2] as structural-thermochemical analogs. The complexes trans-[Pb(18-crown-6)(C5HO2F6)2] and trans-[Ba(18-crown-6)(C5HO2F6)2]

The molecular geometries of the complexes trans-[M(18-crown-6)(C₅HO₂F₆)₂] (where M = Ca, Sr, Ba (I), Zn, Cd, Sn, Pb (II), Fe, Co, Eu, and Yb) were modeled by the molecular mechanics method with fixed R(M-O) distances. The shielding degrees of the central metal atom in these complexes were calculated and the number and types of possible intermolecular contacts between their molecules in the structure were determined. The intermolecular interactions involve identical fragments (atoms) of the ligands: the CF₃ groups of the hexafluoroacetylacetonate ligands and the methylene fragments of the crown ether. Previously unknown complex II and complex I were synthesized according to an original procedure. The structure and thermochemical properties (including sublimation by the Knudsen method) of complex II were studied. As in complex I, the metal cation in complex II is in the cavity of the macrocycle of the crown ether; the hexafluoroacetylacetonate ligands are trans relative to that cation. The presumed similarity of complexes I and II in thermochemical characteristics was confirmed experimentally. Both the complexes melt in close temperature intervals and sublime at the same temperature (～10^?2 mm Hg) without decomposition. The enthalpies of sublimation of complexes I and II, as well as the entropy contributions to their volatilities, are equal to within the experimental error.     

Hydroboration of Phosphaalkynes by HB(C6F5)2

The hydroboration of phosphaalkynes with Piers’ borane (HB(C₆F₅)₂) generated unusual phosphaalkenylboranes [RCH=PB(C₆F₅)₂]₂ that persisted as dimers in both solution and the solid state. These P₂B₂ heterocycles underwent ring opening when subjected to nucleophiles, such as pyridine and tert‐butylisocyanide, to yield monomeric phosphaalkenylborane adducts RCH=PB(C₆F₅)₂(L). DFT calculations were performed to probe the nature of the interaction of phosphaalkynes with boranes.     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.     

Pentafluorphenyliod(III)-Verbindungen. 2. Fluor-Aryl Substitution an Iodtrifluorid: Synthese von Pentafluorphenylioddifluorid C6F5IF2 und Bis(pentafluorphenyl)iodonium Pentafluorphenylfluoroboraten [(C6F5)2I]+[(C6F5)nBF4−n]−

Pentafluorophenyliodine(III) Compounds. 2. Fluorine-Aryl Substitution Reactions on Iodinetrifluoride: Synthesis of Pentafluorophenyliodinedifluoride C₆F₅IF₂ and Bis(pentafluorophenyl)iodonium Pentafluorophenylfluoroborates[(C₆F₅)₂I]⁺[(C₆F₅)_nBF_4?n]^? Mono- and disubstitution can be achieved in the fluorine-aryl substitution reaction on the low-temperature phase IF₃ in CH₂Cl₂ at ?78°C depending on the aryl transfer reagent. With B(C₆F₅)₃ [(C₆F₅)₂I]⁺ [(C₆F₅)_nBF_4?n]^? (68% yield) and with Cd(C₆F₅)₂ C₆F₅IF₂ (97% yield) is obtained whereas with C₆F₅SiMe₃ no fluorine-aryl substitution takes place on IF₃ even under basic conditions (EtCN or F^? addition). At ?78°C in EtCN solution IF₃ does not disproportionate but attacks the solvent under formation of HF.     

A Novel Alkene(alkyl)(aqua)(aryl)platinum(II) Complex – [Pt{CH(CH2C6F5)CH2CH2CH=CH2}(C6F5)(OH2)]

From the reaction of PtCl₂(hex) (hex = hexa‐1,5‐diene) with LiC₆F₅ in diethyl ether, the complex [Pt{CH(CH₂C₆F₅)CH₂CH₂CH=CH₂}(C₆F₅)(OH₂)] ( 1 ) was isolated. The crystal structure (monoclinic, C2/c (no. 15), Z = 8, a = 15.241(3), b = 16.579(2), c = 16.225(2) Å, β = 111.12(2)°) shows a complex with square planar coordination around platinum with a template formed 1‐pentafluorophenylhex‐5‐en‐2‐yl ligand, and C₆F₅ and aqua ligands trans to the double bond and alkyl carbon, respectively.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Perfluororganotellur-Verbindungen: Neue Untersuchungen zur Darstellung von Te(Rf)2 und CH3TeRf (Rf = C2F5, C3F7, C6F5)

Perfluoroorgano Tellurium Compounds: New Investigations on the Preparation of Te(R_f)₂ and CH₃TeR_f (R_f = C₂F₅, C₃F₇, C₆F₅) Methyl(perfluoroorgano) tellurium and bis(perfluoroorgano) tellurium compounds are synthesized in high yields from the photochemical or the thermal reactions of (CH₃)₂ Te with perfluoroorgano iodides in the presence of (C₂H₅)₃N. They are isolated in pure states. Another general method for the preparation of bis(perfluoroorgano) tellurium is the thermal reaction of TeCl₄ with bis(perfluoroorgano) mercury. The preparations and properties of the partially new compounds are described.     

Dihydrogen activation with (t)Bu3P/B(C6F5)3: a chemically competent indirect mechanism via in situ-generated p-(t)Bu2P-C6F4-B(C6F5)2

A chemically competent indirect pathway for the activation of dihydrogen by the nonmetal Lewis acid/Lewis base pair (t)Bu(3)P/B(C(6)F(5))(3) is described. The reaction between (t)Bu(3)P and B(C(6)F(5))(3) produces [(t)Bu(3)PH](+)[FB(C(6)F(5))(3)](-) and the known phosphinoborane p-(t)Bu(2)P-C(6)F(4)-B(C(6)F(5))(2) (1-(t)Bu) with elimination of isobutylene. At 1:1 stoichiometry, 1-(t)Bu is produced rapidly in detectable quantities and can act as a catalyst for the formation of [(t)Bu(3)PH](+)[HB(C(6)F(5))(3)](-) from (t)Bu(3)P and B(C(6)F(5))(3) in the presence of H(2). The extent to which this indirect path competes with the direct path is explored.     

Vaporization of Molecular Strontium and Barium β-Diketonates [Sr(15C5)(C5O2F6H)2] and [Ba(18C6)(C5O2F6H)2]. Structure-Thermochemical Approach

Vaporization of the barium molecular complex [Ba(18C6)(C₅O₂F₆H)₂] and the newly prepared strontium complex [Sr(15C5)(C₅O₂F₆H)₂] was studied using a semiempirical structure-thermochemical approach. The studies of intermolecular steric shielding of individual atoms and analysis of the possible intermolecular contacts in these complexes made it possible to identify the atoms and atom groups with significant contributions to the vaporization enthalpy. The hypothetical vaporization enthalpies were calculated by summing the contributions of groups. The melting and sublimation enthalpies were determined experimentally.     

Dissociative electron attachment to C(2)F(5) radicals

Dissociative electron attachment to the reactive C(2)F(5) molecular radical has been investigated with two complimentary experimental methods; a single collision beam experiment and a new flowing afterglow Langmuir probe technique. The beam results show that F(-) is formed close to zero electron energy in dissociative electron attachment to C(2)F(5). The afterglow measurements also show that F(-) is formed in collisions between electrons and C(2)F(5) molecules with rate constants of 3.7 × 10(-9) cm(3) s(-1) to 4.7 × 10(-9) cm(3) s(-1) at temperatures of 300-600 K. The rate constant increases slowly with increasing temperature, but the rise observed is smaller than the experimental uncertainty of 35%.