CE of phytosiderophores and related metal species in plants

Phytosiderophores (PS) and the closely related substance nicotianamine (NA) are key substances in metal uptake into graminaceous plants. Here, the CE separation of these substances and related metal species is demonstrated. In particular, the three PS 2'-deoxymugineic acid (DMA), mugineic acid (MA), and 3-epi-hydroxymugineic acid (epi-HMA), and NA, are separated using MES/Tris buffer at pH 7.3. Moreover, three Fe(III) species of the different PS are separated without any stability problems, which are often present in chromatographic analyses. Also divalent metal species of Cu, Ni, and Zn with the ligands DMA and NA are separated with the same method. By using a special, zwitterionic CE capillary, even the separation of two isomeric Fe(III) chelates with the ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) is possible (i.e., meso-Fe(III)-EDDHA and rac-Fe(III)-EDDHA), and for fast separations of NA and respective divalent and trivalent metal species, a polymer CE microchip with suppressed EOF is described. The proposed CE method is applicable to real plant samples, and enables to detect changes of metal species (Cu-DMA, Ni-NA), which are directly correlated to biological processes.     

Speciation of iron coordinated by phytosiderophores by use of HPLC with pulsed amperometric detection and AAS

Phytosiderophores of the mugineic acid family, and the respective iron species, have been separated by anion-exchange chromatography with NaOH gradient elution. Two different detection methods were used in parallel, pulsed amperometry (PAD) for phytosiderophores and atomic absorption spectrometry (AAS) for iron. This combination enables identification of separated iron species. Up to five different iron species were separated and detected within 30 min - two different phytosiderophore species, two amino acid species, and one species which has not yet been identified but which is most probably a decomposition product of phytosiderophores. The detection limit was in the low micro mol L(-1) concentration range, which is sufficiently low for determination in real plant samples, even after dilution. The method has been applied to root washings of iron-deficient wheat and barley plants and to a xylem exudate of non-deficient maize.     

Analysis of iron-phytosiderophore complexes in soil related samples: LC-ESI-MS/MS versus CE-MS

Phytosiderophores (PS) form stable complexes with various transition metals. These ligands are exuded by the roots of graminacous plants as a mechanism for mobilizing and acquiring soil iron. To investigate iron mobilization and transport, a novel LC method in combination with ESI-MS/MS for the determination of three Fe(III)-complexes with mugineic acid (MA), 2'-epi-MA and 2'-deoxymugineic acid (DMA) has been developed. Liquid chromatographic separation was realized using a silica-based mixed-mode reversed phase/weak-anion exchange type stationary phase and a 50 mM ammonium acetate buffer, pH 6.5. Baseline separation of the two complex diastereomers Fe(III)-MA and Fe(III)-epi-MA could be achieved. ESI-MS/MS detection allowed for simultaneous quantification of the complexes and the free ligands. Limits of detection were determined to be 0.001 and 0.05 μM for DMA and Fe(III)-DMA, respectively. The analytical figures of merit of the novel method were evaluated and compared with a CE-ESI-MS method that we had published earlier. The LC-ESI-MS/MS method has been successfully applied to real samples derived from preliminary extraction experiments.     

Non-chromatographic screening procedure for arsenic speciation analysis in fish-based baby foods by using electrothermal atomic absorption spectrometry

A procedure for the speciation analysis of arsenic in fish-based baby foods is presented. Inorganic arsenic, methylarsonic acid (MA), dimethylarsinic acid (DMA) and arsenobetaine (AB) were determined by electrothermal atomic absorption spectrometry (ETAAS) using suspensions prepared in a 0.01 mol L⁻¹ tetramethylammonium hydroxide (TMAH) solution. Speciation is based on the use of three different chemically modified ETAAS atomizers to obtain the analytical signals. Using a palladium salt as the chemical modifier, the signal corresponding to the total arsenic concentration is obtained. When palladium is replaced by Ce(IV), the signal is solely due to inorganic arsenic (III and V) + MA. If no signal is obtained in this latter case, it is possible to distinguish between DMA and AB using a zirconium coated atomizer. The signal obtained in this way is due solely to DMA, and the concentration of AB can be obtained by the difference with the total arsenic content. Determinations by ETAAS require the use of the standard additions method. The limits of detection for the determination of AB, DMA and inorganic arsenic (+MA) are 15, 25 and 50 ng g⁻¹ expressed as arsenic, respectively. These detection limits are good enough for the procedure to be appropriate for the rapid determination of these compounds, avoiding extraction processes and/or chromatographic separations. Data for commercial samples, as well as for four standard reference materials, are given.     

Anion exchange liquid chromatography--inductively coupled plasma-mass spectrometry detection of the Co2+, Cu2+, Fe3+ and Ni2+ complexes of mugineic and deoxymugineic acid

Phytosiderophores, such as mugineic and deoxymugineic acid, are produced by graminaceous plant species in response to Fe deficiency conditions normally experienced in calcareous and alkaline non-calcareous soils. As these phytosiderophores have the ability to form thermodynamically stable complexes with other metal cations present in the growing medium, they have also been implicated in the transport and bioavailability of these metals in the environment. However, routine analytical methodology to detect the various metal complexes formed by these phytosiderophores is lacking. Therefore, as these complexes are negatively charged over a wide range of pH values, anion exchange liquid chromatography (AE LC) coupled to inductively coupled plasma-mass spectrometry (ICP-MS) was investigated as a means to separate and quantify these complexes. The metal-phytosiderophore complexes were prepared at pH 7 and separated by NaOH or NH4NO3 gradient elution on a Dionex AS11 anion exchange column. Of the metals tested only the Co2+ and Ni2+ complexes of mugineic and deoxymugineic acid were detected when using a 0-20mM NaOH gradient elution profile. However, the phytosiderophore complexes of Cu2+ and Fe3+ were also detected when using NH4NO3 as the mobile phase at pH 7. Base-assisted hydrolysis of the latter two complexes is proposed to explain their apparent 'instability' in the high pH NaOH mobile phase. The absolute detection limits of the developed methodologies for these metal complexes ranged from 0.1 to 2.8pmol. As phytosiderophore complexes with Cd2+ and Zn2+ were not detected, it was concluded that the dissociation kinetics of these metal-phytosiderophore complexes were too rapid for these complexes to be observed in the present chromatographic conditions.     

Simultaneous chiral determination of methamphetamine and its metabolites in urine by capillary electrophoresis-mass spectrometry

A capillary electrophoresis-mass spectrometry method for the simultaneous chiral determination of enantiomers of methamphetamine (MA), amphetamine (AP), dimethylamphetamine (DMA) and p-hydroxymethamphetamine (pOHMA), in urine has been developed. The internal standards used were 2-phenylethylamine and 1-amino4-phenylbutane. The electrolyte was 1 M formic acid (pH 2.2). The chiral selector, which was added to the electrolyte, was a mixture of 3 mM beta-cyclodextrin and 10 mM heptakis(2,6-di-O-methyl)-beta-cyclodextrin. The detection limits were 0.03 microg ml(-1) for the enantiomers of MA and AP and 0.05 microg ml(-1) for the enantiomers of pOHMA using selected ion monitoring. In the analysis of healthy adult urine samples spiked with MA, AP and pOHMA, the precision of within-run assays (n = 4) for the migration time after correction with two internal standards were under 0.04%, and the detection yields utilizing solid phase extraction were 95-105%. This method was applicable to the analysis of urine samples of MA addicts and DMA addicts.     

Simultaneous qualitative and quantitative method using liquid chromatography selected reaction monitoring-triggered quantitation-enhanced data-dependent tandem mass spectrometry for the identification and classification of amphetamine-type stimulant abusers in human urine

Amphetamine (AP) and amphetamine‐type stimulants, methamphetamine (MA) and N,N‐dimethylamphetamine (DMA), are known as central nervous system stimulants, and their abuse throughout the world has recently increased. Since it is difficult to physically distinguish among AP, MA and DMA, analysts may not be aware of what abusers have administered. In this study, following the detection of specific metabolites of AP, MA and DMA as biomarkers in abuser urines, a rapid and sensitive method was developed for the identification and classification of AP‐type stimulants abusers. After the simple filtration of the urine samples, the samples were directly analyzed using a liquid chromatography/tandem mass spectrometry system with selected reaction monitoring (SRM)‐triggered quantitation‐enhanced data‐dependent MS/MS (QED‐MS/MS) for the simultaneous qualitative and quantitative analysis of p‐hydroxy AP, p‐hydroxy MA, p‐hydroxy DMA, AP, MA, DMA and DMA N‐oxide. The determination of p‐hydroxy AP, p‐hydroxy MA, AP, MA, DMA and DMA N‐oxide was accurate and reproducible, with the limits of quantitation of 5 ng/mL in urine. When applied to the urine samples of suspected AP‐type stimulants abusers, the abused drugs were precisely identified between MA and DMA abusers. Copyright © 2010 John Wiley & Sons, Ltd.     

Amperometric Sniffer for Volatile Amines Based on Paper‐Supported Room Temperature Ionic Liquids Enabling Rapid Assessment of Fish Spoilage

A gas sensors based on a room temperature ionic liquid (RTIL) supported on paper is proposed as amperometric sniffer for monitoring volatile amines (VAs) released from fish samples, in order to gain indication of their state of turning spoiled. It was used as a paper electrochemical detector (PED) for a flow injection system in which controlled headspace volumes in equilibrium with ice‐stored fish samples were directly injected. The performance of this RTIL‐PED sensor was preliminarily tested on synthetic samples of trimethylamine (TMA), dimethylamine (DMA), methylamine (MA) and ammonia (i.e. the main species responsible for the typical flavor of spoiled fish), thus verifying that only TMA, DMA and MA can be detected because NH₃ oxidation occurred beyond the solvent discharge. This notwithstanding, detection of the sole TMA, DMA and MA as a whole turned out to be well suited for the rapid assessment of fish spoilage, since during storage the release enhancement for these amines is largely predominant over that of NH₃. Repeatable (8 % RSD) sharp peaks were detected for all amines above over a wide range (5–1000 nmol) and a detection limit of a little more than 3 nmol was inferred for a signal‐to‐noise ratio of 3. This approach was applied to the detection of VAs released from real fish samples (sardines), in parallel to the determination of their total volatile basic nitrogen (TVBN), which is a conventional indicator frequently adopted for the chemical quality assessment of fish. A substantially satisfactory agreement was found by comparing the data achieved by these two approaches.     

Direct detection of renal function markers using microchip CE with pulsed electrochemical detection

Creatinine, creatine, and uric acid are three important compounds that are measured in a variety of clinical assays, most notably for renal function. Traditional clinical assays for these compounds have focused on the use of enzymes or chemical reactions. Electrophoretic microchips have the potential to integrate separation power of capillary electrophoresis with devices that are small, portable, and have the speed of conventional sensors. The development of a microchip CE system for the direct detection of creatinine, creatine, and uric acid is presented. The device uses pulsed amperometric detection (PAD) to detect the nitrogen-containing compounds as well as the easily oxidizable uric acid. Baseline separation of creatinine, creatine and uric acid was achieved using 30 mM borate buffer (pH = 9.4) in less than 200 s. Linear calibration curves were obtained with limits of detection of 80 microM, 250 microM and 270 microM for creatinine, creatine and uric acid respectively. An optimization of the separation conditions and a comparison of PAD with other amperometric detection modes is also shown. Finally, analysis of a real urine sample is presented with validation of creatinine concentrations using a clinical assay kit based on the Jaffé reaction.     

Selective non-chromatographic determination of tributyltin in sediments using EDTA and diphenylcarbazone as masking agent

Two analytical procedures based on the generation of volatile tributyltin derivatives, their separation by headspace solid-phase microextraction (HS SPME) and subsequent determination using plasma optical emission spectrometry (OES) have been developed for the selective determination of trace tributyltin (TBT) in the presence of other butyltins and inorganic tin in sediments without the use of chromatography. A microwave-assisted leaching of tin compounds from the sediment using 25%_v/v acetic acid is applied for sample pretreatment. The first method takes advantage of TBT chloride releasing from the lecheate after adding 3 M hydrochloric acid, and subsequent separation of the analyte by HS SPME using Carboxen-poly(dimethylsiloxane) (CAR/PDMS). The second method involves the use of masking agents, namely ethylenediaminetetraacetic acid (EDTA) and diphenylcarbazone (DFC), which form stable chelates with monobutyltin (MBT) and dibutyltin (DBT), respectively, followed by the ethylation of tributyltin at pH 5 using sodium tetraethylborate (NaBEt4) solution. The final concentration of NaBEt4 is 0.05%_w/v. The parameters affecting the TBT derivatisation and separation by HS SPME have been optimised including the selection of SPME fibre coating (PDMS, CAR/PDMS), the amount of masking agents and NaBEt4 added, sorption time (2–40 min) and sorption temperature (25–60°C). Higher sensitivity and robustness are attained with the method involving ethylation derivatisation, leading to the limit of detection (LOD) of 3 ng L^?1. The selective release of TBT is observed from aqueous solutions, where the concentrations of MBT and DBT were in 2–50-fold excess to TBT. The SPME-TD-MIP-OES methods have been validated against several certified reference materials (CRMs), including SOPH-1 marine sediment, PACS-2 marine sediment and BCR 646 freshwater sediment.     

Simultaneous chiral analysis of methamphetamine and related compounds by capillary electrophoresis/mass spectrometry using anionic cyclodextrin.

A capillary electrophoresis/mass spectrometry method for the simultaneous chiral analysis of enantiomers of methamphetamine (MA), amphetamine (AP), dimethylamphetamine (DMA), ephedrine (EP), norephedrine (NE) and methylephedrine (ME) in urine has been developed. The background electrolyte was 1 M formic acid (pH 1.7). Using 0.85 mM heptakis(2,6-diacethyl-6-sulfato)-beta-cyclodextrin as the chiral selector, the 12 enantiomers were completely separated within 25 min. The detection limits were 0.01 microg mL(-1) for the enantiomers of MA, AP, DMA, EP and ME, and 0.02 microg mL(-1) for the enantiomers of NE using selected ion monitoring. The reproducibilities of within-run (n = 4) for the migration times and peak areas of the standard mixture were under 0.58% and 7.83%, respectively. The calibration curves of the peak areas of the 12 enantiomers were linear in the range of 0.05 - 10 microg mL(-1). This method was applicable to the analysis of urine samples.     

A Unified Approach to Phytosiderophore Natural Products

This work reports on the concise total synthesis of eight natural products of the mugineic acid and avenic acid families (phytosiderophores). An innovative „east-to-west“ assembly of the trimeric products resulted in a high degree of divergence enabling the formation of the final products in just 10 or 11 steps each with a minimum of overall synthetic effort. Chiral pool starting materials (l -malic acid, threonines) were employed for the outer building blocks while the middle building blocks were accessed by diastereo- and enantioselective methods. A highlight of this work consists in the straightforward preparation of epimeric hydroxyazetidine amino acids, useful building blocks on their own, enabling the first synthesis of 3’’-hydroxymugineic acid and 3’’-hydroxy-2’-deoxymugineic acid.     

Simultaneous determination of phenylglyoxylic acid, mandelic acid, styrene glycol and hippuric acid in primary culture of rat hepatocytes incubate by high-performance liquid chromatography

A simple HPLC method for the simultaneous determination of phenylglyoxylic acid (PGA), mandelic acid (MA), styrene glycol (SG) and hippuric acid (HA) in cell culture medium was developed. Analysis was performed on a C(18) column with a mobile phase composed of methanol-potassium dihydrogen phosphate (pH 2.5; 10 mM; 10:90, v/v) at 220 nm. The flow-rate of mobile phase was set at 0.5 mL/min. The mean absolute recoveries of PGA, MA, SG and HA were 95.9, 98.4, 98.0 and 97.1%, respectively. The inter-day and intra-day precisions, determined at three concentration levels, were less than 10% of RSD. The limits of quantification for PGA, MA, SG and HA were 13.2, 13.1, 14.5 and 11.2 microM with RSD less than 20%. The limits of detection for PGA, MA, SG and HA were 4.6, 4.6, 5.1 and 3.9 microM, respectively. The method was successfully applied to study the stereoselective metabolism of SG and MA in primary culture of rat hepatocytes. The results show that there is stereoselective metabolism for both of MA and SG in primary culture of rat hepatocytes. The extent of biotransformation from S-MA to PGA is significantly greater than that from the R enantiomer and the main metabolites are PGA and HA for S-SG and R-SG, respectively.     

An amperometric method for the detection of amitrole, glyphosate and its aminomethyl-phosphonic acid metabolite in environmental waters using passive samplers

The herbicides amitrole and glyphosate, and its metabolite aminomethyl-phosphonic acid (AMPA), in water samples have been directly analysed by high-performance liquid chromatography using an electrochemical (EC) detector. Limits of detection of 0.3 μg mL⁻¹ for glyphosate, 0.05 μg mL⁻¹ for AMPA and 0.03 μg mL⁻¹ for amitrole were comparable to those obtained by other authors using EC and also by liquid chromatography coupled to mass spectrometry, but the latter method requires derivatisation and pre-concentration of the sample whereas EC methods show similar sensitivity without the need of any derivatisation. The method was specifically designed to analyse extracts from passive samplers used for monitoring of polar herbicide residues in waters. To this purpose, three types of Empore^® disks were tested for their ability to adsorb and desorb these ionic, polar analytes. A procedure for their extraction from the membranes and reducing the interferences from other substances present in natural waters (i.e. humic acids) is described. The method is simple, does not require sophisticated equipment and is valid for the analysis and monitoring of herbicides residues using passive samplers.     

Determination of 2-methylaziridine in workplace atmospheres

A sampling and analytical procedure was developed for the monitoring of airborne 2-methylaziridine (MA). The analyte is collected by drawing air through a solution of 2,4,6-trinitrobenzenesulphonic acid (TNBS). In situ derivatisation of MA with TNBS during sample collection provides stability to the highly reactive analyte and makes it amenable to a sensitive high-performance liquid chromatographic determination with ultraviolet detection. The purified synthetic derivative of MA with TNBS is more suitable as a calibration standard than commercially available MA.     

Comparative studies of the effects of dimethylaniline,methylaniline and aniline in the benzophenonesensitized photopolymerization of methyl methacrylate in bulk and in solution

Comparative studies of the photopolymerization of methyl methacrylate (MMA) at 35 using benzophenone (BP) as sensitizer in combination with dimethylaniline (DMA), methylaniline (MA) or aniline (A) are reported. In each case the initiator exponent is appreciably less than 0.5. Considering rates of polymerization, inhibition periods and apparent activation energy, the relative effectiveness of the amines in photopolymerization is DMA > MA > A. Solvent effects are also different in the 3 amine systems. In each case photoreduction of BP by the amine, through formation of the BP'-amine exciplex, leads to generation of an amine radical and the semipinacol radical, the former acting as an initiator and the latter as a terminator (primary radical termination). Kinetic analysis indicates that the rate constants of initiation, k_c for the amine radicals lie in the order DMA radical > MA radical > A radical.     

Particle formation in the hydrolysis of tetraethyl orthosilicate in pH buffer solution

Particle formation in the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) was studied by varying pH (9.5-11) with the basic catalysts NH3, methylamine (MA), and dimethylamine (DMA) in the presence of 5 mol/m3 CH3COOH, which was chosen to suppress time variations of pH and ionic strength during the reaction. Spherical particles were formed for MA and DMA at catalyst concentrations of 0.02-0.2 kmol/m3 and for NH3 at catalyst concentrations of 0.1-1.5 kmol/m3. In a common range of catalyst concentrations for spherical particle formation, average particle size was largest for DMA and smallest for NH3. Hydrolysis rate of TEOS could be quantified by the use of buffer systems as a function of TEOS and OH- concentrations. A specific relation was not found between the hydrolysis and the particle size. The zeta potential of silica particles measured in the reaction solvent was in the order DMA < MA < NH3, and ionic strength, estimated from pH in the reactions, was in the order DMA approximately equal to MA > NH3. This suggested that the particle sizes were controlled by electrostatic particle interactions.     

Ultratrace analysis for trans,trans-muconic acid by electrophoric derivatization and capillary gas chromatography

A highly sensitive method is described for the determination of trans,trans-muconic acid (MA), a biomarker of benzene exposure. The method is based on the derivatization of MA with an electrophoric reagent, 2-(pentafluorophenoxy)ethyl-2-(piperidino)ethanesulfonate, using potassium carbonate and 18-crown-6 ether as reaction activators. The resulting pentafluorophenoxy derivative of MA was analyzed by capillary GC with an electron-capture detector (ECD). The lower quantitation limit of the method is attainable at 0.3 μM of MA with a detection limit of about 60 nM (S/N=3) (60 fmol per 1.0 μl injection). Application of the method to the analysis of MA in urine proved feasible.     

有机过氧化物与N-甲基-N-2-羟乙基苯胺引发体系的研究

测定了有机过氧化物与N-甲基-N-2-羟乙基苯胺(HMA)体系引发MMA聚合的动力学方程和聚合表现活化能。由过氧化物/HMA/MNP的ESR波谱证实芳叔胺HMA中,与氮原子相连的亚甲基的氢被摘去形成相应的碳自由基,它能引发单体聚合成为聚合物的端基。这也由聚合物的UV光谱所证实,由实验结果提出这类体系的引发机理。     

Application of microchip-CE electrophoresis to follow the degradation of phenolic acids by aquatic plants

In this paper, we describe the separation and detection of six phenolic acids using an electrophoretic microchip with pulsed amperometric detection (PAD). The selected phenolic acids are particularly important because of their biological activity. The analysis of these compounds is typically performed by chromatography or standard CE coupled with a wide variety of detection modes. However, these methods are slow, labor intensive, involve a multistep solvent extraction, require skilled personnel, or use bulky and expensive instrumentation. In contrast, microchip CE offers the possibility of performing simpler, less expensive, and faster analysis. In addition, integrated devices can be custom-fabricated and incorporated with portable computers to perform on-site analysis. In the present report, the effect of the separation potential, buffer pH and composition, injection time and PAD parameters were studied in an effort to optimize both the separation and detection of these phenolic acids. Using the optimized conditions, the analysis can be performed in less than 3 min, with detection limits ranging from 0.73 microM (0.10 microg/mL) for 4-hydroxyphenylacetic acid to 2.12 microM (0.29 microg/mL) for salicylic acid. In order to demonstrate the capabilities of the device, the degradation of a mixture of these acids by two aquatic plants was followed using the optimized conditions.